Study guide
0.1 Cisco 350-401 ENCOR Exam Logistics, Blueprint Structure, and Certification Paths
Cisco ENCOR 350-401 CCNP Enterprise Core
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 Cisco 350-401 ENCOR Exam Logistics, Blueprint Structure, and Certification Paths 0.2 Preparation Strategy, Lab Environment Setup, and Practical Test Pacing
2 Enterprise Campus Architecture and High Availability
1.1 Enterprise Network Design: Two-Tier, Three-Tier, Fabric, and Cloud Architectures 1.2 High Availability Architecture: Device Redundancy, FHRPs, and Stateful Switchover (SSO) 1.3 Quality of Service (QoS) Architecture, Classification, Queuing, and Configuration Interpretation
3 Cisco Software-Defined Architecture: SD-WAN and SD-Access
2.1 Cisco Catalyst SD-WAN: Control, Management, and Data Planes 2.2 Cisco SD-Access Architecture: Control Plane, Data Plane, and Fabric Node Roles 2.3 SD-Access Campus Interoperability: Integrating Traditional Networks with Fabric
4 Device and Network Virtualization Technologies
3.1 Device Virtualization: Type 1/2 Hypervisors, Virtual Machines, and Virtual Switching 3.2 Data Path Virtualization: VRF-Lite, GRE Tunneling, and IPsec VPN Fundamentals 3.3 Network Virtualization Overlays: LISP and VXLAN Encapsulation Mechanics
5 Layer 2 Infrastructure: Trunking, EtherChannel, and Spanning Tree
4.1 802.1Q Trunking, Native VLAN, and Dynamic Trunking Protocol Troubleshooting 4.2 EtherChannel Bundling: Static, LACP, and PAgP Implementation and Verification 4.3 Spanning Tree Architecture: RSTP, MST, and STP Protection Mechanisms
6 Layer 3 Routing: OSPF Multi-Area and Protocol Comparison
5.1 Enterprise Routing Principles: Distance Vector vs. Link-State, EIGRP, and OSPF 5.2 OSPFv2 and OSPFv3 Multi-Area Architecture: LSAs, Area Types, and Summarization 5.3 Policy-Based Routing (PBR) Architecture, Configuration, and Route-Maps
7 Exterior Routing: BGP Peering and Path Selection
6.1 External BGP (eBGP) Peering, States, Neighbor Adjacencies, and Timers 6.2 BGP Path Attributes and the Step-by-Step Best Path Selection Algorithm
8 IP Services and First-Hop Redundancy
7.1 Time Synchronization: Network Time Protocol (NTP) and Precision Time Protocol (PTP) 7.2 Network Address Translation: Static NAT, Dynamic NAT, and PAT/Overload 7.3 First Hop Redundancy Protocols: HSRP and VRRP Implementation and Failover
9 IP Multicast Architecture and Protocols
8.1 Multicast Addressing, IGMPv2/v3 Host Membership, and the RPF Check 8.2 Protocol Independent Multicast Sparse Mode (PIM-SM) and Rendezvous Point Discovery 8.3 Anycast RP with MSDP, Source-Specific Multicast (SSM), and Bidirectional PIM
10 Network Diagnostics, Monitoring, and Telemetry
9.1 Network Diagnostic Tools: Conditional Debugging, Traceroute, SNMPv3, and Syslog Logging 9.2 Flexible NetFlow (FNF) Architecture: Flow Records, Exporters, and Monitors 9.3 Switched Port Analyzer: Local SPAN, Remote SPAN (RSPAN), and Encapsulated RSPAN (ERSPAN)
11 Performance Monitoring and Model-Driven Assurance
10.1 IP Service Level Agreements (IP SLA) Probes, Responder, and Route Tracking 10.2 Cisco Catalyst Center: Assurance Dashboards, AI Analytics, and Machine Reasoning Workflows 10.3 Model-Driven Telemetry and Programmable Interfaces: NETCONF and RESTCONF Verification
12 Device Access Control and AAA Architecture
11.1 Device Line Protection: Console, Aux, VTY, Local Authentication, and Privilege Levels 11.2 AAA Architecture: Comparing RADIUS vs. TACACS+ and Method List Configuration
13 Infrastructure Security: ACLs, CoPP, and API Security
12.1 IPv4 and IPv6 Access Control Lists (ACLs): Standard, Extended, and Named Rules 12.2 Control Plane Policing (CoPP): Protecting the Route Processor with MQC 12.3 REST API Security: Token Authentication, TLS Transport, and Rate Limiting
14 Enterprise Network Security Design: ISE, TrustSec, and MACsec
13.1 Endpoint Security Architecture: 802.1X, Cisco ISE Posture, and Profiling 13.2 Next-Generation Firewalls (FTD) and Enterprise Threat Defense Design 13.3 Cisco TrustSec (Security Group Tags) and MACsec (802.1AE) Layer 2 Encryption
15 Network Automation Fundamentals: Python, JSON, and YANG
14.1 Python Fundamentals for Network Engineers: Data Types, Control Flow, and Libraries 14.2 JSON Data Encoding: Syntax, Formatting Rules, and Python Serialization 14.3 YANG Data Modeling: Modules, Tree Structures, and Data Representation
16 Controller REST APIs and RESTCONF Implementation
15.1 Cisco Catalyst Center Intent APIs and Authentication Workflows 15.2 Cisco Catalyst SD-WAN Manager (vManage) REST APIs and Device Interaction 15.3 RESTCONF Protocol Operations: HTTP Verbs, Datastores, and Response Codes
17 Event-Driven Automation and Infrastructure Orchestration
16.1 Cisco Embedded Event Manager (EEM) Applet Architecture and Event Detectors 16.2 Configuration Management: Comparing Ansible, Puppet, Chef, and SaltStack 16.3 Infrastructure as Code (IaC) Principles with Terraform in Enterprise Networks
0.1 Cisco 350-401 ENCOR Exam Logistics, Blueprint Structure, and Certification Paths
Key Takeaways Explain This Topic AI
Cisco 350-401 ENCOR v1.2 is a 120-minute exam that costs US$400 and is delivered by Pearson VUE at a test center or online through OnVUE.
Cisco does not publish the ENCOR question count or passing score; the score report shows pass or fail plus a performance breakout by exam section.
ENCOR v1.2 replaced v1.1 on March 19, 2026: wireless topics moved to the new CCNP Wireless track and Domain 6 became Automation and Artificial Intelligence (15%).
ENCOR groups its performance-based lab items at the start of the exam (first hour), and Cisco exams do not let you return to an earlier item.
Passing ENCOR earns the Enterprise Core specialist credential, meets the CCNP Enterprise core requirement, and opens a three-year window to pass the CCIE Enterprise Infrastructure lab.
Last updated: October 2026
Cisco 350-401 ENCOR Exam Logistics, Blueprint Structure, and Certification Paths
The Implementing Cisco Enterprise Network Core Technologies (ENCOR 350-401) exam is the core exam for the Cisco Certified Network Professional (CCNP) Enterprise certification and the qualifying exam for the Cisco Certified Internetwork Expert (CCIE) Enterprise Infrastructure lab. Cisco's v1.2 exam topics describe a 120-minute exam that tests dual-stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation. Version 1.2 replaced v1.1 on March 19, 2026 ; the last date to test on v1.1 was March 18, 2026.
Exam Facts at a Glance
- Exam parameter Current fact (checked October 2026)
- Exam code and version 350-401 ENCOR v1.2
- Duration 120 minutes
- Price US$400, or Cisco Learning Credits; local taxes and currency can change the amount
- Languages English and Japanese
- Delivery Pearson VUE test center or OnVUE online proctoring
- Item types Multiple choice, drag-and-drop, and performance-based lab items
Number of questions Not published by Cisco; forms vary, and lab items take far longer than multiple-choice items
- Passing score Not published; Cisco sets passing scores statistically and says they can change without notice
- Score report Pass or fail, plus a performance breakout by exam section
- Retake after a fail Wait 5 calendar days, counting from the day after the failed attempt
- Retake after a pass Wait at least 180 days before taking the same exam number again
- Validity 3 years; recertify with Continuing Education credits, exams, or a combination
Many third-party sites quote a fixed question count or a cut score such as 825 out of 1000. Cisco publishes neither, so do not build your pacing plan around a number you cannot verify.
How the Exam Is Structured: Labs First
Since October 2024, Cisco has grouped ENCOR's performance-based lab items at the start of the exam. Cisco's announcement says candidates work through the labs in the first hour and the multiple-choice questions in the second hour. A lab item gives you a virtual topology with a working CLI; show and debug commands, the ? help, and tab completion all function. You are asked to configure, verify, or fix something, and the result is checked.
Cisco exams also do not allow you to go back to a previous item once you move forward, and there is no end-of-exam review screen. Treat every Next click as final.
Certification Paths That Use ENCOR
Passing 350-401 earns the Cisco Certified Specialist – Enterprise Core credential by itself. It also satisfies two larger goals:
CCNP Enterprise core requirement. CCNP Enterprise requires ENCOR plus one concentration exam. Cisco's policy is that you must complete a certification's requirements within three years of passing its qualifying exam.
CCIE Enterprise Infrastructure qualifying exam. After passing ENCOR you have three years to pass the 8-hour CCIE Enterprise Infrastructure lab. If the three years expire first, you must pass the qualifying exam again.
CCNP Enterprise concentration exams listed by Cisco in 2026:
- Concentration exam Focus
- 300-410 ENARSI Advanced routing, VPN services, infrastructure security, and infrastructure services
- 300-415 ENSDWI Cisco Catalyst SD-WAN implementation
- 300-420 ENSLD Enterprise network design, including SD-Access
- 300-435 ENAUTO Enterprise automation and programmability
- 300-440 ENCC Designing and implementing secure cloud connectivity
- 300-445 ENNA Enterprise network assurance design and implementation
Important
The March 19, 2026 update moved wireless out of CCNP Enterprise. The wireless concentration exams became WLSD 300-110 and WLSI 300-120 under the new CCNP Wireless certification, whose core exam is 350-101 WLCOR . WLCOR, not ENCOR, is now the qualifying exam for CCIE Wireless. Study materials that still list ENWLSD 300-425 or ENWLSI 300-430 as CCNP Enterprise concentrations are out of date.
The Six v1.2 Domains
Domain Weight What the official topics cover
1.0 Architecture 15% 2-tier, 3-tier, fabric, and cloud design; high availability (redundancy, FHRP, SSO); Catalyst SD-WAN and SD-Access working principles; interpreting QoS configurations
2.0 Virtualization 10% Type 1 and Type 2 hypervisors, virtual machines, virtual switching; configuring VRF, GRE, and IPsec tunnels; LISP and VXLAN concepts
3.0 Infrastructure 30% 802.1Q trunking and EtherChannel troubleshooting; RSTP, MST, and STP guards; EIGRP versus OSPF; OSPFv2 and OSPFv3; eBGP; PBR; NTP and PTP; NAT/PAT; HSRP and VRRP; multicast (RPF, PIM-SM, IGMPv2/v3, SSM, bidir, MSDP)
4.0 Network Assurance 10% Debugs, conditional debugs, traceroute, ping, SNMP, and syslog; Flexible NetFlow; SPAN, RSPAN, and ERSPAN; IP SLA; Catalyst Center traditional and AI-powered workflows; NETCONF and RESTCONF
5.0 Security 20% Lines, local users, and AAA; ACLs and CoPP; REST API security; threat defense, endpoint security, next-generation firewalls, TrustSec, and MACsec
6.0 Automation and Artificial Intelligence 15% Python, JSON, and YANG; Catalyst Center and SD-WAN Manager APIs; REST response codes with Catalyst Center and RESTCONF; EEM applets; agent versus agentless orchestration tools
What Changed from v1.1 to v1.2
Wireless was removed. RF fundamentals, AP modes, roaming, WLAN configuration, and wireless security moved to the CCNP Wireless track.
AI appears in two places. Domain 6 was renamed Automation and Artificial Intelligence , and topic 4.5 now asks how Catalyst Center applies configuration, monitoring, and management through traditional and AI-powered workflows . The individual Domain 6 topics (Python, JSON, YANG, controller APIs, response codes, EEM, orchestration tools) are still automation skills.
Multicast grew. Topic 3.3.d now names SSM, bidirectional PIM, and MSDP alongside RPF, PIM-SM, and IGMPv2/v3.
Product names were updated. The topics now use Catalyst SD-WAN, SD-WAN Manager, and Catalyst Center (formerly DNA Center).
Practical Candidate Scenarios
Scenario A (engineer targeting CCNP): An engineer who runs a branch WAN passes ENCOR and then 300-415 ENSDWI, completing CCNP Enterprise with an SD-WAN focus.
Scenario B (architect targeting CCIE): An architect passes ENCOR and books the CCIE Enterprise Infrastructure lab inside the three-year qualifying window, using that time to build hands-on speed on the same routing, SD-Access, and automation topics.