Study guide
10.2 Ongoing Operations vs Completed Operations Forms
CISR Commercial Casualty I Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction: Course & Exam Overview
CISR Commercial Casualty I: Official Topics, Format & Exam Rules
2 Chapter 1: Essentials of Legal Liability
1.1 Torts and Negligence Principles 1.2 Contractual Liability, Statutory Liability & Damages 1.3 Commercial Liability Exposure Identification
3 Chapter 2: CGL Structure, Hazards & Coverage A Insuring Agreement
2.1 CGL Policy Overview & Coverage A Insuring Agreement 2.2 Premises-Operations vs Products-Completed Operations Hazards 2.3 Coverage A Exclusions Part 1: Intentional Acts, Contractual & Statutory Exposures
4 Chapter 3: Coverage A Exclusions — Property, Operations & Emerging Risks
3.1 Coverage A Exclusions Part 2: Pollution, Transportation, Mobile Equipment & War 3.2 Coverage A Exclusions Part 3: Business Risk Exclusions 3.3 Coverage A Exclusions Part 4: Recalls, Electronic Data & Statutory Violations
5 Chapter 4: Coverage B — Personal and Advertising Injury
4.1 Coverage B Insuring Agreement & The Seven Covered Offenses 4.2 Defamation, Privacy Violations & Intellectual Property Offenses 4.3 Coverage B Exclusions & Media Business Limitations
6 Chapter 5: Coverage C & Supplementary Payments
5.1 Coverage C Medical Payments Insuring Agreement 5.2 Coverage C Exclusions & Ineligible Claimants 5.3 Supplementary Payments for Coverages A and B
7 Chapter 6: Who Is An Insured (Section II)
6.1 Named Insured Entities & Automatic Status 6.2 Employees, Volunteer Workers & Permitted Representatives 6.3 Newly Acquired Organizations & The Unlisted Entity Rule
8 Chapter 7: Limits of Insurance & Policy Conditions
7.1 CGL Limits Structure & How Limits Apply 7.2 Core Policy Conditions: Duties After Loss & Legal Action 7.3 Other Insurance, Subrogation & Premium Audit
9 Chapter 8: CGL Definitions & Coverage Mechanics
8.1 Essential Terms: Bodily Injury, Property Damage & Occurrence 8.2 Key Definitions: Products-Completed Operations Hazard & Insured Contracts 8.3 Defining Mobile Equipment, Impaired Property & Your Work/Product
10 Chapter 9: Occurrence vs. Claims-Made Forms
9.1 Occurrence vs Claims-Made Core Mechanics & Triggers 9.2 The Retroactive Date & Coverage Gaps 9.3 Extended Reporting Periods (ERPs): Basic vs Supplemental
11 Chapter 10: Additional Insureds & Contractual Risk Transfer
10.1 Contractual Risk Transfer & Why Additional Insured Status Is Required 10.2 Ongoing Operations vs Completed Operations Forms 10.3 Automatic Blanket Endorsements & Primary/Non-Contributory Status
12 Chapter 11: Endorsements, Producer Conduct & E&O Risk Management
11.1 Aggregate & Coverage Expansion Endorsements 11.2 Common Restrictive Endorsements & Exclusions 11.3 Producer Professional Conduct, Certificates of Insurance & E&O
10.2 Ongoing Operations vs Completed Operations Forms
Key Takeaways Explain This Topic AI
The ISO CG 20 10 endorsement provides additional insured coverage strictly for liability arising out of ongoing operations performed by or on behalf of the named insured, terminating all coverage the moment the work is completed or put to its intended use.
The ISO CG 20 37 endorsement extends coverage to the additional insured for bodily injury and property damage falling within the products-completed operations hazard, protecting upstream parties against latent construction defects that emerge post-completion.
Relying solely on the CG 20 10 is a severe operational risk; upstream entities must mandate both CG 20 10 and CG 20 37 together to avoid a catastrophic coverage void for post-construction losses.
Since the 2004 editions, CG 20 10 covers the additional insured only for injury caused in whole or in part by the named insured's acts or omissions (CG 20 37: by 'your work'), and the 2013 and 2019 editions add law-permitted and contract-required caps.
Last updated: September 2026
10.2 Ongoing Operations vs Completed Operations Forms
Quick Summary: In commercial construction casualty underwriting, the temporal boundary between active work and completed work is of paramount importance. The Insurance Services Office (ISO) separates additional insured coverage into two distinct endorsements: the CG 20 10, which covers liability arising out of ongoing operations, and the CG 20 37, which covers liability within the products-completed operations hazard. If an upstream project owner or general contractor obtains only the CG 20 10, all additional insured protection evaporates the second the subcontractor finishes its physical work or the building is put to its intended use. Comprehensive risk management requires both endorsements to ensure continuous protection against both active jobsite accidents and latent construction defect claims.
The Cornerstone ISO Endorsements: CG 20 10 and CG 20 37
To properly structure contractual risk transfer on construction and service accounts, insurance practitioners must master the distinct operational scopes of ISO's two primary additional insured endorsements:
CG 20 10 — Additional Insured — Owners, Lessees or Contractors — Scheduled Person or Organization: This endorsement modifies Section II (Who Is an Insured) to include the scheduled entity, but only with respect to liability for bodily injury, property damage, or personal and advertising injury caused, in whole or in part, by the named insured's ongoing operations performed for that additional insured.
CG 20 37 — Additional Insured — Owners, Lessees or Contractors — Completed Operations: This endorsement extends additional insured status to the scheduled entity for bodily injury and property damage caused, in whole or in part, by "your work" at the designated location, performed for that additional insured and included in the products-completed operations hazard . TEMPORAL COVERAGE SPECTRUM IN CONSTRUCTION
- [ Project Inception ──────────────────────► Project Completion ] ──────► [ Years Post-Completion ]
- ◄─────────────────── ONGOING OPERATIONS ──────────────────────► ◄───── COMPLETED OPERATIONS ─────►
- ISO CG 20 10 ISO CG 20 37
- Active jobsite operations • Latent defects & leaks
- Scaffolding collapses, dropped tools • Structural failures & rot
- Active subcontractor work • Electrical fires years later
- Coverage terminates upon completion • Required for statutory repose
- ISO CG 20 10: The Scope and Limits of Ongoing Operations Coverage
The fundamental operational premise of the CG 20 10 is that it protects the additional insured only while the work is actively in progress . The endorsement explicitly incorporates exclusionary language governing completed work:
"This insurance does not apply to 'bodily injury' or 'property damage' occurring after:
(1) All work, including materials, parts or equipment furnished in connection with such work, on the project (other than service, maintenance or repairs) to be performed by or on behalf of the additional insured(s) at the location of the covered operations has been completed; or
(2) That portion of 'your work' out of which the injury or damage arises has been put to its intended use by any person or organization other than another contractor or subcontractor engaged in performing operations for a principal as a part of the same project."
When Does Ongoing Operations Coverage Terminate?
Under the standard ISO policy terms, ongoing operations coverage ceases immediately upon the occurrence of either of two events:
Project Completion: When all work on the project (other than service, maintenance, or repairs) to be performed by or on behalf of the additional insured at the location of the covered operations has been completed. Minor warranty callbacks or punch-list touch-ups do not resurrect ongoing operations status for previously completed segments.
Intended Use / Partial Occupancy: The moment a portion of the facility is put to its intended operational use by the owner, tenant, or general public. For example, if a multi-story commercial office building is opened for commercial tenant occupancy floor-by-floor, ongoing operations coverage under CG 20 10 terminates for each finished floor as soon as tenants move in, even if the subcontractor is still performing active mechanical installations on higher floors.
ISO CG 20 37: The Vital Necessity of Completed Operations Coverage
While accidents during active construction (such as dropped tools, trench collapses, or crane failures) are dramatic, the most financially catastrophic casualty claims in the construction industry arise long after the project has been completed and occupied. These are latent construction defect claims .
Under Section V of the CGL policy, the products-completed operations hazard encompasses all bodily injury and property damage occurring away from premises owned or rented by the named insured and arising out of "your product" or "your work," provided the work has been completed or put to its intended use.
Latent construction defect hazards frequently take months or years to manifest:
Building Envelope & Roofing Failures: A roofing or waterproofing subcontractor improperly seals exterior flashing. Water silently infiltrates the exterior sheathing over three rainy seasons, causing extensive internal dry rot, toxic mold colonies, and structural timber decay.
Plumbing & Mechanical Failures: A mechanical subcontractor fails to properly solder a high-pressure commercial chilled-water joint inside a wall cavity. Eighteen months after final certificate of occupancy, the joint ruptures under hydraulic pressure, flooding computer server rooms and causing $3,000,000 in property damage and business interruption.
Electrical Fire Hazards: An electrical contractor miscalculates load balancing or miswires a junction box inside a suspended ceiling. Three years post-completion, electrical arcing ignites building insulation, destroying the commercial retail complex.
Under all of these scenarios, if the upstream property owner or general contractor holds only a CG 20 10 endorsement, the subcontractor's CGL carrier will immediately deny coverage for the additional insured. Because the injury or physical damage occurred after the subcontractor's operations were completed, the loss falls squarely within the products-completed operations hazard—a hazard covered exclusively by the CG 20 37 endorsement.
The Multi-Year Maintenance Requirement
Because latent defect claims can be filed years into the future, sophisticated construction agreements do not merely require the subcontractor to provide CG 20 37 during the active construction phase. Upstream agreements mandate that the subcontractor must continuously renew and maintain completed operations additional insured coverage (CG 20 37) for a specified number of years following final completion—typically tied to the state's statute of repose (often 5 to 10 years depending on the jurisdiction).
The Lethal Trap: Relying Exclusively on CG 20 10
A rampant and catastrophic error among inexperienced insurance producers, subcontractors, and upstream certificate reviewers is assuming that "Additional Insured status has been satisfied" simply because an endorsement labeled CG 20 10 is attached to the policy.
Consider the following real-world claim analysis:
Phase of Incident Factual Scenario CG 20 10 Response CG 20 37 Response
During Construction (Month 4) Subcontractor's worker drops a steel wrench from scaffolding, striking a pedestrian on the sidewalk below. COVERED: Bodily injury occurred during active, ongoing operations performed for the additional insured. NO COVERAGE NEEDED: (Loss is covered under ongoing operations; completed operations has not attached).
Post-Completion (Month 18) Siding installed by the subcontractor detaches during a severe windstorm, crashing into adjacent vehicles and injuring a driver. DENIED: The work was completed 18 months prior; CG 20 10 explicitly excludes completed operations. COVERED: Loss occurred within the products-completed operations hazard arising out of the subcontractor's work.
Latent Defect (Year 4) Defective balcony railings installed by the subcontractor fail under normal load, causing a tenant to fall and suffer catastrophic injuries. DENIED: Zero coverage exists under CG 20 10 once operations have concluded. COVERED: Directly addresses bodily injury arising from completed work, provided policy/endorsement remained active.
If the general contractor accepted an insurance certificate referencing only the CG 20 10, the general contractor is left entirely unprotected for the 18-month and 4-year incidents under the subcontractor's policy. The general contractor must defend the resulting multi-million-dollar lawsuits through its own insurance program, absorbing massive deductible expenses and devastating its loss history.
The Historical Evolution of ISO Edition Dates: 1985 to Modern Forms
The coverage granted by ISO additional insured endorsements has evolved dramatically over four decades. To interpret an endorsement accurately, an insurance professional must inspect the edition date (the four-digit month/year code following the form number, such as CG 20 10 11 85 versus CG 20 10 04 13 ). EVOLUTION OF ISO CAUSATION LANGUAGE
- 1985 Edition (CG 20 10 11 85) 2004/2013/2019 Modern Editions
- ┌────────────────────────────────┐ ┌────────────────────────────────┐
- │ "Arising out of your work" │ │ "Caused in whole or in part │
- │ │ │ by your acts or omissions" │
- │ • Broadest possible causation │ │ • Requires downstream fault │
- │ • Includes ongoing & completed │ │ • Eliminates AI sole fault │
- │ • Covered AI's sole negligence │ │ • Separate completed form │
- │ • Widely demanded, rarely sold │ │ • Statutory and contract caps │
- └────────────────────────────────┘ └────────────────────────────────┘
- The Landmark 11 85 Edition: Broadest Coverage
The November 1985 edition ( CG 20 10 11 85 ) provided coverage to the additional insured for liability "arising out of 'your work' for that insured by or for you."
Covered Both Ongoing and Completed Operations: Because it used the undefined phrase "your work" without an ongoing operations limitation, the 11 85 edition covered both ongoing operations and completed operations under a single endorsement.
Sole Negligence of Additional Insured: The phrase "arising out of" was interpreted by courts nationwide as requiring only incidental, "but-for" causal connection. Consequently, if a general contractor was 100% solely negligent for an accident, but the accident occurred in the general vicinity of where the subcontractor was working, courts held that the subcontractor's CGL policy was forced to provide 100% defense and indemnity for the general contractor's sole negligence!
Underwriter Withdrawal: Because carriers suffered massive unanticipated payouts for the sole carelessness of large developers and general contractors, ISO withdrew this wording. Today, standard market carriers virtually never issue the unamended 11 85 edition.
The 1993, 1997, and 2001 Revisions: The Ongoing Split
In the 1993 edition, ISO replaced "arising out of 'your work'" with "arising out of 'your ongoing operations'" in CG 20 10, and the 1997 edition added an express exclusion for injury or damage occurring after the work is completed. In 2001, ISO officially introduced the CG 20 37 to allow underwriters to write completed operations coverage as a separate, individually priced endorsement.
The 2004 Revision: Eliminating Sole Negligence
In July 2004, ISO reworded both endorsements, in part because anti-indemnity statutes were restricting broad-form risk shifting. In CG 20 10, ISO replaced "arising out of your ongoing operations" with liability:
"...caused, in whole or in part, by:
- 1. Your acts or omissions; or
- 2. The acts or omissions of those acting on your behalf..."
(In CG 20 37, the parallel change made coverage apply to injury or damage "caused, in whole or in part, by 'your work'" performed for the additional insured and included in the products-completed operations hazard.)
This "caused, in whole or in part" standard fundamentally altered additional insured coverage:
Requires Contributory Fault: Coverage for the additional insured is activated only if the named insured (or someone acting on its behalf) was at least partially at fault for the occurrence.
Excludes Sole Negligence of the Additional Insured: If the additional insured is 100% solely at fault for the accident, zero coverage exists for that additional insured under the named insured's policy.
The 2013 and 2019 Revisions: Contractual & Statutory Caps
In the April 2013 edition (retained in 2019), ISO introduced further restrictions to prevent coverage from exceeding contractual intent or violating state law:
Statutory Anti-Indemnity Compliance: Language was added stating that the insurance afforded to the additional insured will not be broader than what is permitted by law.
Contractual Cap on Coverage Scope: Coverage will not be broader than what the named insured is required by the written contract to provide.
Contractual Cap on Limits of Insurance: The limits of insurance available to the additional insured are capped at the lesser of the amount required by the contract or the applicable limits of the policy.
The 12 19 editions keep these provisions; the limits clause now refers to the "applicable limits of insurance" rather than limits "shown in the Declarations."