Study guide
5.6 Related Rates of Change
CLEP Calculus Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 About the CLEP Calculus Exam
2 Chapter 2: Limits and Continuity
2.1 Limit Concepts and Limit Laws 2.2 Algebraic Evaluation of Limits & Indeterminate Forms 2.3 Limits Involving Infinity and Asymptotes 2.4 Continuity and the Intermediate Value Theorem
3 Chapter 3: Foundations of Derivatives
3.1 The Derivative Definition and Rates of Change 3.2 Basic Differentiation Rules & Rectilinear Motion 3.3 The Product and Quotient Rules 3.4 Derivatives of Trigonometric Functions
4 Chapter 4: Advanced Differentiation Techniques
4.1 The Chain Rule 4.2 Derivatives of Exponential & Logarithmic Functions 4.3 Derivatives of Inverse Trigonometric Functions 4.4 Derivatives of Inverse Functions 4.5 Implicit Differentiation 4.6 L'Hôpital's Rule and Indeterminate Forms
5 Chapter 5: Applications of Differential Calculus
5.1 Tangent Lines, Normal Lines & Linear Approximation 5.2 Rolle's Theorem & The Mean Value Theorem 5.3 Curve Analysis & The First Derivative Test 5.4 Concavity and the Second Derivative Test 5.5 Applied Optimization Problems 5.6 Related Rates of Change
6 Chapter 6: Foundations of Integral Calculus
6.1 Antiderivatives and Indefinite Integrals 6.2 Integration by Substitution (Indefinite) 6.3 Riemann Sums and the Definite Integral 6.4 Properties of the Definite Integral
7 Chapter 7: Fundamental Theorem of Calculus & Net Change
7.1 The Fundamental Theorem of Calculus 7.2 Definite Integrals via Substitution 7.3 The Net Change Theorem & Rectilinear Particle Motion
8 Chapter 8: Applications of Integrals & Differential Equations
8.1 Area Between Curves 8.2 Volumes of Solids of Revolution 8.3 Average Value of a Function & The Mean Value Theorem for Integrals 8.4 Separable Differential Equations & Growth/Decay Models
5.6 Related Rates of Change
Key Takeaways Explain This Topic AI
Related rates problems calculate the unknown rate of change of one variable with respect to time (d/dt) by differentiating an underlying geometric relationship connecting multiple time-dependent variables.
The Chain Rule with respect to time dictates that every time-varying variable x(t) generates a derivative term dx/dt upon differentiation (e.g. d/dt[x^2] = 2x dx/dt).
The Golden Rule of Related Rates is: NEVER substitute numerical snapshot values for time-varying quantities before differentiating; variables must remain symbolic until d/dt is computed.
Secondary geometric relations (such as similar triangles r/h = R/H in conical tanks or shadow problems) are used to eliminate extraneous variables prior to differentiation.
Sign conventions must be rigorously maintained: quantities that grow with time have positive rates (dx/dt > 0), whereas quantities that shrink have negative rates (dy/dt < 0).
Last updated: August 2026
5.6 Related Rates of Change
Core CLEP Concept: In related rates problems, two or more geometric quantities change simultaneously over time t t t . By establishing an algebraic equation that connects these variables at all times and differentiating implicitly with respect to time using the Chain Rule , we create a dynamic rate equation relating their derivatives ( d x d t , d y d t , d r d t , d h d t , d V d t , d θ d t \frac{dx}{dt}, \frac{dy}{dt}, \frac{dr}{dt}, \frac{dh}{dt}, \frac{dV}{dt}, \frac{d\theta}{dt} d t d x , d t d y , d t d r , d t d h , d t d V , d t d θ ).
1. Foundational Theory & Implicit Time Differentiation
When quantities vary with time, each variable is an implicit function of t t t : x = x ( t ) , y = y ( t ) , r = r ( t ) , V = V ( t ) x = x(t), y = y(t), r = r(t), V = V(t) x = x ( t ) , y = y ( t ) , r = r ( t ) , V = V ( t ) . Applying the operator d d t \frac{d}{dt} d t d requires using the Chain Rule on every variable term: d d t [ x 2 ] = 2 x d x d t d d t [ r 3 ] = 3 r 2 d r d t d d t [ x ⋅ y ] = x d y d t + y d x d t (Product Rule) d d t [ x y ] = y d x d t − x d y d t y 2 (Quotient Rule) d d t [ sin θ ] = cos θ d θ d t d d t [ 1 h ] = − 1 h 2 d h d t \begin{aligned}
- \frac{d}{dt}[x^2] &= 2x\frac{dx}{dt} \\[4pt]
- \frac{d}{dt}[r^3] &= 3r^2\frac{dr}{dt} \\[4pt]
- \frac{d}{dt}[x\cdot y] &= x\frac{dy}{dt} + y\frac{dx}{dt} \quad \text{(Product Rule)} \\[4pt]
\frac{d}{dt}\left[\frac{x}{y}\right] &= \frac{y\frac{dx}{dt} - x\frac{dy}{dt}}{y^2} \quad \text{(Quotient Rule)} \\[4pt]
- \frac{d}{dt}[\sin\theta] &= \cos\theta \frac{d\theta}{dt} \\[4pt]
- \frac{d}{dt}\left[\frac{1}{h}\right] &= -\frac{1}{h^2}\frac{dh}{dt}
\end{aligned} d t d [ x 2 ] d t d [ r 3 ] d t d [ x ⋅ y ] d t d [ y x ] d t d [ sin θ ] d t d [ h 1 ] = 2 x d t d x = 3 r 2 d t d r = x d t d y + y d t d x (Product Rule) = y 2 y d t d x − x d t d y (Quotient Rule) = cos θ d t d θ = − h 2 1 d t d h
- 2. The 6-Step Master Related Rates Protocol 6-Step Related Rates Protocol
- │
- 1. Draw Diagram & Identify Variables ┼───> Distinguish CONSTANTS from VARIABLES
- 2. Record Rates & Snapshot Values ──┼───> Given: dx/dt = k; Target: dy/dt at t = t0
- 3. Formulate Primary Equation ──────┼───> Geometric link: Pythagorean, Volume, Trig
- 4. Eliminate Unwanted Variables ────┼───> Use secondary constraints (similar triangles)
- 5. Differentiate Implicitly (d/dt) ─┼───> Apply Chain Rule to every variable term
- 6. Substitute Snapshot & Solve ─────┴───> Plug in numbers AFTER differentiating & attach units
Important
The Cardinal Rule of Related Rates: NEVER substitute a numerical value for a changing quantity BEFORE differentiating! If a ladder is sliding down a wall, its height y ( t ) y(t) y ( t ) is changing. If you plug in y = 12 y = 12 y = 12 before differentiating, d d t [ 12 ] = 0 \frac{d}{dt}[12] = 0 d t d [ 12 ] = 0 , which falsely destroys the rate d y d t \frac{dy}{dt} d t d y . Constants that NEVER change (such as the length of a rigid ladder L = 13 L = 13 L = 13 ) may be substituted before differentiating; all changing variables must remain symbolic until after differentiation.
- 3. Classic Problem Archetypes
- Archetype 1: The Sliding Ladder
Problem: A 13 -foot 13\text{-foot} 13 -foot ladder leans against a vertical wall. The bottom of the ladder slides away from the wall at a constant rate of 0.5 ft/s 0.5\text{ ft/s} 0.5 ft/s . How fast is the top of the ladder sliding down the wall at the instant when the bottom is 5 feet 5\text{ feet} 5 feet from the wall? |\
- | \
- | \ Ladder of fixed length L = 13 ft
- | \
- y | \
- | \
- | \
- +-------+-----> x
- x
Variables & Constants: Let x x x be the distance from wall to ladder base, y y y be height on wall. Fixed length L = 13 ft L = 13\text{ ft} L = 13 ft (constant).
Given & Target Rates: d x d t = + 0.5 ft/s \frac{dx}{dt} = +0.5\text{ ft/s} d t d x = + 0.5 ft/s . Find d y d t \frac{dy}{dt} d t d y when x = 5 ft x = 5\text{ ft} x = 5 ft .
Primary Equation (Pythagorean Theorem): x 2 + y 2 = 13 2 = 169 x^2 + y^2 = 13^2 = 169 x 2 + y 2 = 1 3 2 = 169
Snapshot Height: When x = 5 x = 5 x = 5 , y = 169 − 5 2 = 169 − 25 = 144 = 12 ft y = \sqrt{169 - 5^2} = \sqrt{169 - 25} = \sqrt{144} = 12\text{ ft} y = 169 − 5 2 = 169 − 25 = 144 = 12 ft .
Differentiate implicitly with respect to t t t : d d t [ x 2 + y 2 ] = d d t [ 169 ] ⟹ 2 x d x d t + 2 y d y d t = 0 ⟹ x d x d t + y d y d t = 0 \frac{d}{dt}[x^2 + y^2] = \frac{d}{dt}[169] \implies 2x\frac{dx}{dt} + 2y\frac{dy}{dt} = 0 \implies x\frac{dx}{dt} + y\frac{dy}{dt} = 0 d t d [ x 2 + y 2 ] = d t d [ 169 ] ⟹ 2 x d t d x + 2 y d t d y = 0 ⟹ x d t d x + y d t d y = 0
Substitute snapshot values and solve: ( 5 ) ( 0.5 ) + ( 12 ) d y d t = 0 ⟹ 2.5 + 12 d y d t = 0 ⟹ d y d t = − 2.5 12 = − 5 24 ft/s (5)(0.5) + (12)\frac{dy}{dt} = 0 \implies 2.5 + 12\frac{dy}{dt} = 0 \implies \frac{dy}{dt} = -\frac{2.5}{12} = -\frac{5}{24}\text{ ft/s} ( 5 ) ( 0.5 ) + ( 12 ) d t d y = 0 ⟹ 2.5 + 12 d t d y = 0 ⟹ d t d y = − 12 2.5 = − 24 5 ft/s Conclusion: The top of the ladder is sliding down at 5 24 ft/s ≈ 0.208 ft/s . \text{Conclusion: The top of the ladder is sliding down at } \frac{5}{24}\text{ ft/s} \approx 0.208\text{ ft/s}. Conclusion: The top of the ladder is sliding down at 24 5 ft/s ≈ 0.208 ft/s .
Extended Ladder Questions:
Rate of change of enclosed triangle area ( A = 1 2 x y A = \frac{1}{2}xy A = 2 1 x y ): d A d t = 1 2 ( x d y d t + y d x d t ) = 1 2 ( 5 ( − 5 24 ) + 12 ( 0.5 ) ) = 1 2 ( − 25 24 + 6 ) = 119 48 ft 2 /s \frac{dA}{dt} = \frac{1}{2}\left(x\frac{dy}{dt} + y\frac{dx}{dt}\right) = \frac{1}{2}\left(5\left(-\frac{5}{24}\right) + 12(0.5)\right) = \frac{1}{2}\left(-\frac{25}{24} + 6\right) = \frac{119}{48}\text{ ft}^2\text{/s} d t d A = 2 1 ( x d t d y + y d t d x ) = 2 1 ( 5 ( − 24 5 ) + 12 ( 0.5 ) ) = 2 1 ( − 24 25 + 6 ) = 48 119 ft 2 /s
Rate of change of angle with ground ( cos θ = x / 13 \cos\theta = x/13 cos θ = x /13 ): − sin θ d θ d t = 1 13 d x d t ⟹ − ( 12 13 ) d θ d t = 1 13 ( 0.5 ) ⟹ d θ d t = − 0.5 12 = − 1 24 rad/s -\sin\theta \frac{d\theta}{dt} = \frac{1}{13}\frac{dx}{dt} \implies -\left(\frac{12}{13}\right)\frac{d\theta}{dt} = \frac{1}{13}(0.5) \implies \frac{d\theta}{dt} = -\frac{0.5}{12} = -\frac{1}{24}\text{ rad/s} − sin θ d t d θ = 13 1 d t d x ⟹ − ( 13 12 ) d t d θ = 13 1 ( 0.5 ) ⟹ d t d θ = − 12 0.5 = − 24 1 rad/s
Archetype 2: The Draining / Filling Inverted Conical Tank
Conical tank problems require using similar triangles to eliminate the radius r r r before differentiating.
Problem: An inverted conical water tank has a height of H = 12 meters H = 12\text{ meters} H = 12 meters and a base radius at the top of R = 4 meters R = 4\text{ meters} R = 4 meters . Water is pumped into the tank at a constant rate of d V d t = 2 m 3 /min \frac{dV}{dt} = 2\text{ m}^3\text{/min} d t d V = 2 m 3 /min . How fast is the water level rising when the water is 6 meters 6\text{ meters} 6 meters deep? |<--- 2R = 8m --->|
- +-----------------+
- \ r /
- \ +-----+ /
- \ | | /
- h \ | | / H = 12m
- \| |/
- \ * /
- \ /
- \ /
- V
Primary Volume Equation: V = 1 3 π r 2 h V = \frac{1}{3}\pi r^2 h V = 3 1 π r 2 h .
Secondary Relationship (Similar Triangles): The cross-sectional triangle of the water cone is similar to the full tank cone: r h = R H = 4 12 = 1 3 ⟹ r = h 3 \frac{r}{h} = \frac{R}{H} = \frac{4}{12} = \frac{1}{3} \implies r = \frac{h}{3} h r = H R = 12 4 = 3 1 ⟹ r = 3 h
Substitute r r r into volume formula to eliminate r r r : V = 1 3 π ( h 3 ) 2 h = 1 3 π ( h 2 9 ) h = π 27 h 3 V = \frac{1}{3}\pi \left(\frac{h}{3}\right)^2 h = \frac{1}{3}\pi \left(\frac{h^2}{9}\right) h = \frac{\pi}{27} h^3 V = 3 1 π ( 3 h ) 2 h = 3 1 π ( 9 h 2 ) h = 27 π h 3
Differentiate implicitly with respect to t t t : d V d t = π 27 ( 3 h 2 d h d t ) = π 9 h 2 d h d t \frac{dV}{dt} = \frac{\pi}{27} \left(3h^2\frac{dh}{dt}\right) = \frac{\pi}{9} h^2 \frac{dh}{dt} d t d V = 27 π ( 3 h 2 d t d h ) = 9 π h 2 d t d h
Substitute snapshot values ( h = 6 , d V d t = 2 h = 6, \frac{dV}{dt} = 2 h = 6 , d t d V = 2 ) and solve: 2 = π 9 ( 6 ) 2 d h d t ⟹ 2 = π 9 ( 36 ) d h d t ⟹ 2 = 4 π d h d t ⟹ d h d t = 2 4 π = 1 2 π m/min 2 = \frac{\pi}{9} (6)^2 \frac{dh}{dt} \implies 2 = \frac{\pi}{9}(36) \frac{dh}{dt} \implies 2 = 4\pi \frac{dh}{dt} \implies \frac{dh}{dt} = \frac{2}{4\pi} = \frac{1}{2\pi}\text{ m/min} 2 = 9 π ( 6 ) 2 d t d h ⟹ 2 = 9 π ( 36 ) d t d h ⟹ 2 = 4 π d t d h ⟹ d t d h = 4 π 2 = 2 π 1 m/min
Archetype 3: The Moving Shadow (Streetlight Problem)
Problem: A person 6 feet 6\text{ feet} 6 feet tall walks away from a 15 -foot 15\text{-foot} 15 -foot lamppost at a speed of 5 ft/s 5\text{ ft/s} 5 ft/s .
At what rate is the length of the person's shadow increasing?
- At what speed is the tip of the shadow moving? |
- 15m |\
- | \
- | \
- | |\
- | |6\
- +---+--+-------->
- x s
- |<-- x+s ------>|
Variables: Let x x x be distance from pole to person, s s s be length of shadow. Tip of shadow distance from pole is ( x + s ) (x + s) ( x + s ) .
Given Rate: d x d t = 5 ft/s \frac{dx}{dt} = 5\text{ ft/s} d t d x = 5 ft/s .
Similar Triangles Equation: 15 x + s = 6 s ⟹ 15 s = 6 ( x + s ) = 6 x + 6 s ⟹ 9 s = 6 x ⟹ s = 2 3 x \frac{15}{x + s} = \frac{6}{s} \implies 15s = 6(x + s) = 6x + 6s \implies 9s = 6x \implies s = \frac{2}{3}x x + s 15 = s 6 ⟹ 15 s = 6 ( x + s ) = 6 x + 6 s ⟹ 9 s = 6 x ⟹ s = 3 2 x
Rate shadow is lengthening: d s d t = 2 3 d x d t = 2 3 ( 5 ) = 10 3 ft/s \frac{ds}{dt} = \frac{2}{3}\frac{dx}{dt} = \frac{2}{3}(5) = \frac{10}{3}\text{ ft/s} d t d s = 3 2 d t d x = 3 2 ( 5 ) = 3 10 ft/s
Speed of the tip of the shadow: d d t [ x + s ] = d x d t + d s d t = 5 + 10 3 = 25 3 ft/s \frac{d}{dt}[x + s] = \frac{dx}{dt} + \frac{ds}{dt} = 5 + \frac{10}{3} = \frac{25}{3}\text{ ft/s} d t d [ x + s ] = d t d x + d t d s = 5 + 3 10 = 3 25 ft/s
- (Note: Both shadow rates are completely constant and independent of the person's position x x x !)
- Archetype 4: Expanding Spheres & Geometric Shapes
Problem: A spherical balloon is being inflated with gas such that its volume increases at a constant rate of 100 π cm 3 /s 100\pi\text{ cm}^3\text{/s} 100 π cm 3 /s . How fast is the surface area of the balloon increasing at the instant when the radius is 5 cm 5\text{ cm} 5 cm ?
Equations: V = 4 3 π r 3 V = \frac{4}{3}\pi r^3 V = 3 4 π r 3 and S = 4 π r 2 S = 4\pi r^2 S = 4 π r 2 .
Differentiate Volume: d V d t = 4 π r 2 d r d t ⟹ 100 π = 4 π ( 5 ) 2 d r d t ⟹ 100 π = 100 π d r d t ⟹ d r d t = 1 cm/s \frac{dV}{dt} = 4\pi r^2 \frac{dr}{dt} \implies 100\pi = 4\pi (5)^2 \frac{dr}{dt} \implies 100\pi = 100\pi \frac{dr}{dt} \implies \frac{dr}{dt} = 1\text{ cm/s} d t d V = 4 π r 2 d t d r ⟹ 100 π = 4 π ( 5 ) 2 d t d r ⟹ 100 π = 100 π d t d r ⟹ d t d r = 1 cm/s
Differentiate Surface Area: d S d t = 8 π r d r d t = 8 π ( 5 ) ( 1 ) = 40 π cm 2 /s \frac{dS}{dt} = 8\pi r \frac{dr}{dt} = 8\pi (5) (1) = 40\pi\text{ cm}^2\text{/s} d t d S = 8 π r d t d r = 8 π ( 5 ) ( 1 ) = 40 π cm 2 /s
4. Master Reference Guide to Common Related Rates Relations
Geometric Shape Primary Equation Differentiated Rate Equation
Right Triangle (Ladder) x 2 + y 2 = L 2 x^2 + y^2 = L^2 x 2 + y 2 = L 2 2 x d x d t + 2 y d y d t = 0 2x\frac{dx}{dt} + 2y\frac{dy}{dt} = 0 2 x d t d x + 2 y d t d y = 0
Circle Area A = π r 2 A = \pi r^2 A = π r 2 d A d t = 2 π r d r d t \frac{dA}{dt} = 2\pi r \frac{dr}{dt} d t d A = 2 π r d t d r
Sphere Volume V = 4 3 π r 3 V = \frac{4}{3}\pi r^3 V = 3 4 π r 3 d V d t = 4 π r 2 d r d t \frac{dV}{dt} = 4\pi r^2 \frac{dr}{dt} d t d V = 4 π r 2 d t d r
Sphere Surface Area S = 4 π r 2 S = 4\pi r^2 S = 4 π r 2 d S d t = 8 π r d r d t \frac{dS}{dt} = 8\pi r \frac{dr}{dt} d t d S = 8 π r d t d r
Inverted Cone Tank V = π R 2 3 H 2 h 3 V = \frac{\pi R^2}{3H^2}h^3 V = 3 H 2 π R 2 h 3 d V d t = π R 2 H 2 h 2 d h d t \frac{dV}{dt} = \frac{\pi R^2}{H^2}h^2 \frac{dh}{dt} d t d V = H 2 π R 2 h 2 d t d h
Cylinder Volume V = π r 2 h V = \pi r^2 h V = π r 2 h d V d t = π r 2 d h d t + 2 π r h d r d t \frac{dV}{dt} = \pi r^2 \frac{dh}{dt} + 2\pi r h \frac{dr}{dt} d t d V = π r 2 d t d h + 2 π r h d t d r
Elevation Angle tan θ = y x \tan\theta = \frac{y}{x} tan θ = x y sec 2 θ d θ d t = x d y d t − y d x d t x 2 \sec^2\theta \frac{d\theta}{dt} = \frac{x\frac{dy}{dt} - y\frac{dx}{dt}}{x^2} sec 2 θ d t d θ = x 2 x d t d y − y d t d x