Study guide
8.4 Separable Differential Equations & Growth/Decay Models
CLEP Calculus Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 About the CLEP Calculus Exam
2 Chapter 2: Limits and Continuity
2.1 Limit Concepts and Limit Laws 2.2 Algebraic Evaluation of Limits & Indeterminate Forms 2.3 Limits Involving Infinity and Asymptotes 2.4 Continuity and the Intermediate Value Theorem
3 Chapter 3: Foundations of Derivatives
3.1 The Derivative Definition and Rates of Change 3.2 Basic Differentiation Rules & Rectilinear Motion 3.3 The Product and Quotient Rules 3.4 Derivatives of Trigonometric Functions
4 Chapter 4: Advanced Differentiation Techniques
4.1 The Chain Rule 4.2 Derivatives of Exponential & Logarithmic Functions 4.3 Derivatives of Inverse Trigonometric Functions 4.4 Derivatives of Inverse Functions 4.5 Implicit Differentiation 4.6 L'Hôpital's Rule and Indeterminate Forms
5 Chapter 5: Applications of Differential Calculus
5.1 Tangent Lines, Normal Lines & Linear Approximation 5.2 Rolle's Theorem & The Mean Value Theorem 5.3 Curve Analysis & The First Derivative Test 5.4 Concavity and the Second Derivative Test 5.5 Applied Optimization Problems 5.6 Related Rates of Change
6 Chapter 6: Foundations of Integral Calculus
6.1 Antiderivatives and Indefinite Integrals 6.2 Integration by Substitution (Indefinite) 6.3 Riemann Sums and the Definite Integral 6.4 Properties of the Definite Integral
7 Chapter 7: Fundamental Theorem of Calculus & Net Change
7.1 The Fundamental Theorem of Calculus 7.2 Definite Integrals via Substitution 7.3 The Net Change Theorem & Rectilinear Particle Motion
8 Chapter 8: Applications of Integrals & Differential Equations
8.1 Area Between Curves 8.2 Volumes of Solids of Revolution 8.3 Average Value of a Function & The Mean Value Theorem for Integrals 8.4 Separable Differential Equations & Growth/Decay Models
8.4 Separable Differential Equations & Growth/Decay Models
Key Takeaways Explain This Topic AI
A first-order differential equation is separable if it can be factored algebraically into a product of a function of x and a function of y: dy/dx = g(x) * h(y), enabling separation into (1 / h(y)) dy = g(x) dx.
The 4-step separation protocol requires: (1) algebraically separating variables with differentials in numerators, (2) integrating both sides directly, (3) substituting the initial condition immediately to evaluate the constant C, and (4) isolating the dependent variable y explicitly.
The Law of Natural Growth and Decay (dy/dt = ky) models systems where the rate of change is directly proportional to the current quantity, producing the universal solution y(t) = y_0 * e^(kt).
Exponential growth models (k > 0) have a constant doubling time t_d = (ln 2) / k; exponential decay models (k < 0) have a constant half-life t_h = (ln 2) / |k|, both independent of the initial amount y_0.
Newton's Law of Cooling (dT/dt = -k(T - T_env)) yields the solution T(t) = T_env + (T_0 - T_env) * e^(-kt), while slope fields provide graphical tangent direction maps for visualizing solution families without integrating.
Last updated: August 2026
8.4 Separable Differential Equations & Growth/Decay Models
Core CLEP Concept: A differential equation is an equation relating an unknown function to one or more of its derivatives. On the CLEP Calculus exam, differential equation questions focus on first-order separable equations , initial value problems (IVPs) , the universal exponential growth and decay model ( d y d t = k y \frac{dy}{dt} = ky d t d y = k y ), Newton's Law of Cooling , and graphical interpretation of slope fields . Mastering separation of variables and logarithmic/exponential manipulations ensures maximum points on both calculator and non-calculator sections.
- 1. Foundations: Terminology & Solution Types
- Definitions & Terminology
Differential Equation (DE): An equation containing derivatives of an unknown function (e.g., d y d x = 2 x y \frac{dy}{dx} = 2xy d x d y = 2 x y ).
Order of a DE: The order of the highest derivative present. On the CLEP exam, all tested differential equations are first-order (involving only first derivatives d y d x \frac{dy}{dx} d x d y or d y d t \frac{dy}{dt} d t d y ).
General Solution: A family of functions containing an arbitrary constant of integration C C C that satisfies the differential equation across its domain.
Initial Condition: A specified coordinate pair ( x 0 , y 0 ) (x_0, y_0) ( x 0 , y 0 ) or ( t 0 , y 0 ) (t_0, y_0) ( t 0 , y 0 ) defining the state of the system at a known instant.
Particular Solution: The single, unique curve from the general solution family that passes through the given initial condition point.
Verifying Candidate Solutions
To verify whether a candidate function y = f ( x ) y = f(x) y = f ( x ) solves a given differential equation:
Compute the derivative d y d x = f ′ ( x ) \frac{dy}{dx} = f'(x) d x d y = f ′ ( x ) .
Substitute y y y and d y d x \frac{dy}{dx} d x d y into both sides of the differential equation.
Confirm that the equation simplifies to a mathematical identity ( 0 = 0 0 = 0 0 = 0 or LHS ≡ \equiv ≡ RHS).
2. The Method of Separation of Variables
A first-order differential equation is separable if it can be written in the form: d y d x = g ( x ) ⋅ h ( y ) or d y d x = g ( x ) p ( y ) \frac{dy}{dx} = g(x) \cdot h(y) \quad \text{or} \quad \frac{dy}{dx} = \frac{g(x)}{p(y)} d x d y = g ( x ) ⋅ h ( y ) or d x d y = p ( y ) g ( x )
- The 4-Step Separation Protocol +-------------------------------------------------------------------------+
- | SEPARATION OF VARIABLES 4-STEP PROTOCOL |
- +-------------------------------------------------------------------------+
- | 1. SEPARATE: Move all y terms and dy to LHS; all x terms and dx to RHS. |
- | (1 / h(y)) dy = g(x) dx [Differentials MUST be in tops!] |
- | 2. INTEGRATE: Integrate both sides: int (1 / h(y)) dy = int g(x) dx + C |
- | 3. SOLVE FOR C: Apply initial condition (x_0, y_0) IMMEDIATELY. |
- | 4. ISOLATE y: Use algebra/exponentials to write y explicitly as f(x). |
- +-------------------------------------------------------------------------+
- Step-by-Step Worked Example 1: Initial Value Problem
Problem: Solve the initial value problem d y d x = 2 x y \frac{dy}{dx} = \frac{2x}{y} d x d y = y 2 x with initial condition y ( 0 ) = − 3 y(0) = -3 y ( 0 ) = − 3 .
Step 1: Separate variables. Multiply both sides by y d x y \, dx y d x : y d y = 2 x d x y \, dy = 2x \, dx y d y = 2 x d x
Step 2: Integrate both sides. ∫ y d y = ∫ 2 x d x ⟹ 1 2 y 2 = x 2 + C \int y \, dy = \int 2x \, dx \implies \frac{1}{2}y^2 = x^2 + C ∫ y d y = ∫ 2 x d x ⟹ 2 1 y 2 = x 2 + C
Step 3: Solve for C C C immediately using y ( 0 ) = − 3 y(0) = -3 y ( 0 ) = − 3 . 1 2 ( − 3 ) 2 = ( 0 ) 2 + C ⟹ 9 2 = C \frac{1}{2}(-3)^2 = (0)^2 + C \implies \frac{9}{2} = C 2 1 ( − 3 ) 2 = ( 0 ) 2 + C ⟹ 2 9 = C 1 2 y 2 = x 2 + 9 2 \frac{1}{2}y^2 = x^2 + \frac{9}{2} 2 1 y 2 = x 2 + 2 9
Step 4: Isolate y y y explicitly. Multiply by 2 2 2 : y 2 = 2 x 2 + 9 ⟹ y = ± 2 x 2 + 9 y^2 = 2x^2 + 9 \implies y = \pm \sqrt{2x^2 + 9} y 2 = 2 x 2 + 9 ⟹ y = ± 2 x 2 + 9
Selecting the correct sign: Because the initial condition requires y ( 0 ) = − 3 < 0 y(0) = -3 < 0 y ( 0 ) = − 3 < 0 , we must select the negative square root : y ( x ) = − 2 x 2 + 9 y(x) = -\sqrt{2x^2 + 9} y ( x ) = − 2 x 2 + 9
(Warning: Selecting + 2 x 2 + 9 +\sqrt{2x^2 + 9} + 2 x 2 + 9 yields y ( 0 ) = + 3 ≠ − 3 y(0) = +3 \neq -3 y ( 0 ) = + 3 = − 3 , violating the initial condition!)
- 3. The Law of Natural Growth and Decay ( d y d t = k y \frac{dy}{dt} = ky d t d y = k y )
- The Fundamental Principle
In many natural phenomena, the rate of growth or decay of a quantity y y y is directly proportional to the current amount present: d y d t = k y \frac{dy}{dt} = k y d t d y = k y
If k > 0 k > 0 k > 0 : Exponential Growth (population growth, continuously compounded interest).
If k < 0 k < 0 k < 0 : Exponential Decay (radioactive decay, chemical decomposition).
- Full Derivation of the Universal Solution
- Step 1: Separate variables. 1 y d y = k d t \frac{1}{y} \, dy = k \, dt y 1 d y = k d t
Step 2: Integrate both sides. ∫ 1 y d y = ∫ k d t ⟹ ln ∣ y ∣ = k t + C 1 \int \frac{1}{y} \, dy = \int k \, dt \implies \ln|y| = kt + C_1 ∫ y 1 d y = ∫ k d t ⟹ ln ∣ y ∣ = k t + C 1
Step 3: Exponentiate both sides. ∣ y ∣ = e k t + C 1 = e C 1 ⋅ e k t ⟹ y ( t ) = A e k t ( where A = ± e C 1 ) |y| = e^{kt + C_1} = e^{C_1} \cdot e^{kt} \implies y(t) = A e^{kt} \quad (\text{where } A = \pm e^{C_1}) ∣ y ∣ = e k t + C 1 = e C 1 ⋅ e k t ⟹ y ( t ) = A e k t ( where A = ± e C 1 )
Step 4: Apply initial condition y ( 0 ) = y 0 y(0) = y_0 y ( 0 ) = y 0 . y ( 0 ) = A e k ( 0 ) = A ( 1 ) = y 0 ⟹ A = y 0 y(0) = A e^{k(0)} = A(1) = y_0 \implies A = y_0 y ( 0 ) = A e k ( 0 ) = A ( 1 ) = y 0 ⟹ A = y 0 y ( t ) = y 0 e k t \mathbf{y(t) = y_0 e^{kt}} y ( t ) = y 0 e kt Exponential Growth (k > 0) Exponential Decay (k < 0)
- y ^ y ^
- | .-' | y_0
| .' | *--.
| / | | `.
| .' | | `.
| .' | | `-.
y0| -* | | `--.
| | | `--.
- -+-------------------> t --+--+-------------------> t
- 0 0 t_half
- Doubling Time ( k > 0 k > 0 k > 0 )
The time t d t_d t d required for an initial population y 0 y_0 y 0 to double ( y = 2 y 0 y = 2y_0 y = 2 y 0 ): 2 y 0 = y 0 e k t d ⟹ 2 = e k t d ⟹ ln ( 2 ) = k t d ⟹ t d = ln 2 k 2y_0 = y_0 e^{k t_d} \implies 2 = e^{k t_d} \implies \ln(2) = k t_d \implies \mathbf{t_d = \frac{\ln 2}{k}} 2 y 0 = y 0 e k t d ⟹ 2 = e k t d ⟹ ln ( 2 ) = k t d ⟹ t d = k ln 2
Half-Life ( k < 0 k < 0 k < 0 or d y d t = − k y \frac{dy}{dt} = -ky d t d y = − k y )
The time t h t_h t h required for half of a radioactive substance to decay ( y = 1 2 y 0 y = \frac{1}{2}y_0 y = 2 1 y 0 ): 1 2 y 0 = y 0 e − k t h ⟹ 1 2 = e − k t h ⟹ ln ( 1 / 2 ) = − k t h ⟹ − ln 2 = − k t h ⟹ t h = ln 2 k \frac{1}{2}y_0 = y_0 e^{-k t_h} \implies \frac{1}{2} = e^{-k t_h} \implies \ln(1/2) = -k t_h \implies -\ln 2 = -k t_h \implies \mathbf{t_h = \frac{\ln 2}{k}} 2 1 y 0 = y 0 e − k t h ⟹ 2 1 = e − k t h ⟹ ln ( 1/2 ) = − k t h ⟹ − ln 2 = − k t h ⟹ t h = k ln 2
Key Constant Property: Doubling time and half-life depend strictly on the rate constant k k k and are completely independent of the initial amount y 0 y_0 y 0 .
Step-by-Step Worked Example 2: Radioactive Decay & Radiocarbon Dating
Problem: Carbon-14 has a half-life of 5,730 5{,}730 5 , 730 years. An ancient wooden artifact found at an archaeological site contains 25 % 25\% 25% of the Carbon-14 found in living trees. Determine the age of the artifact.
Step 1: Compute decay constant k k k . k = ln 2 t h = ln 2 5730 k = \frac{\ln 2}{t_h} = \frac{\ln 2}{5730} k = t h ln 2 = 5730 ln 2
Step 2: Set up decay equation with y ( t ) = 0.25 y 0 y(t) = 0.25 y_0 y ( t ) = 0.25 y 0 . 0.25 y 0 = y 0 e − k t ⟹ 0.25 = e − k t 0.25 y_0 = y_0 e^{-kt} \implies 0.25 = e^{-kt} 0.25 y 0 = y 0 e − k t ⟹ 0.25 = e − k t
Step 3: Solve for time t t t . ln ( 0.25 ) = − k t ⟹ ln ( 1 4 ) = − k t ⟹ − ln ( 4 ) = − k t \ln(0.25) = -kt \implies \ln\left(\frac{1}{4}\right) = -kt \implies -\ln(4) = -kt ln ( 0.25 ) = − k t ⟹ ln ( 4 1 ) = − k t ⟹ − ln ( 4 ) = − k t t = ln 4 k = 2 ln 2 ln 2 5730 = 2 ⋅ 5730 = 11,460 years t = \frac{\ln 4}{k} = \frac{2\ln 2}{\frac{\ln 2}{5730}} = 2 \cdot 5730 = 11{,}460 \text{ years} t = k ln 4 = 5730 l n 2 2 ln 2 = 2 ⋅ 5730 = 11 , 460 years
(Inspection shortcut: 25 % = ( 1 2 ) 2 25\% = \left(\frac{1}{2}\right)^2 25% = ( 2 1 ) 2 , meaning exactly 2 2 2 half-lives have elapsed: 2 × 5,730 = 11,460 2 \times 5{,}730 = 11{,}460 2 × 5 , 730 = 11 , 460 years.)
4. Newton's Law of Cooling
Newton's Law of Cooling states that the rate of change of the temperature T ( t ) T(t) T ( t ) of an object is directly proportional to the difference between its temperature and the ambient temperature of the surrounding medium T env T_{\text{env}} T env : d T d t = − k ( T − T env ) ( k > 0 ) \frac{dT}{dt} = -k (T - T_{\text{env}}) \quad (k > 0) d t d T = − k ( T − T env ) ( k > 0 )
Derivation of Explicit Solution
Separate variables: 1 T − T env d T = − k d t \frac{1}{T - T_{\text{env}}} \, dT = -k \, dt T − T env 1 d T = − k d t
Integrate: ln ∣ T − T env ∣ = − k t + C 1 \ln|T - T_{\text{env}}| = -kt + C_1 ln ∣ T − T env ∣ = − k t + C 1
Exponentiate: T − T env = A e − k t T - T_{\text{env}} = A e^{-kt} T − T env = A e − k t
Apply initial condition T ( 0 ) = T 0 T(0) = T_0 T ( 0 ) = T 0 : T 0 − T env = A T_0 - T_{\text{env}} = A T 0 − T env = A T ( t ) = T env + ( T 0 − T env ) e − k t \mathbf{T(t) = T_{\text{env}} + (T_0 - T_{\text{env}}) e^{-kt}} T ( t ) = T env + ( T 0 − T env ) e − kt
Step-by-Step Worked Example 3: Cooling Coffee
Problem: A freshly brewed cup of coffee at temperature 90 ∘ C 90^\circ\text{C} 9 0 ∘ C is placed in a room maintained at a constant temperature of 20 ∘ C 20^\circ\text{C} 2 0 ∘ C . After 10 10 10 minutes, the coffee has cooled to 60 ∘ C 60^\circ\text{C} 6 0 ∘ C . How many total minutes will it take for the coffee to reach 30 ∘ C 30^\circ\text{C} 3 0 ∘ C ?
Step 1: Set up the model parameters.
T env = 20 T_{\text{env}} = 20 T env = 20
T 0 = 90 ⟹ T 0 − T env = 90 − 20 = 70 T_0 = 90 \implies T_0 - T_{\text{env}} = 90 - 20 = 70 T 0 = 90 ⟹ T 0 − T env = 90 − 20 = 70
T ( t ) = 20 + 70 e − k t T(t) = 20 + 70 e^{-kt} T ( t ) = 20 + 70 e − k t
Step 2: Find constant k k k using T ( 10 ) = 60 T(10) = 60 T ( 10 ) = 60 . 60 = 20 + 70 e − 10 k ⟹ 40 = 70 e − 10 k ⟹ e − 10 k = 4 7 60 = 20 + 70 e^{-10k} \implies 40 = 70 e^{-10k} \implies e^{-10k} = \frac{4}{7} 60 = 20 + 70 e − 10 k ⟹ 40 = 70 e − 10 k ⟹ e − 10 k = 7 4 − 10 k = ln ( 4 7 ) ⟹ k = − 1 10 ln ( 4 7 ) = 1 10 ln ( 7 4 ) ≈ 0.05596 -10k = \ln\left(\frac{4}{7}\right) \implies k = -\frac{1}{10}\ln\left(\frac{4}{7}\right) = \frac{1}{10}\ln\left(\frac{7}{4}\right) \approx 0.05596 − 10 k = ln ( 7 4 ) ⟹ k = − 10 1 ln ( 7 4 ) = 10 1 ln ( 4 7 ) ≈ 0.05596
Step 3: Solve for t t t when T ( t ) = 30 T(t) = 30 T ( t ) = 30 . 30 = 20 + 70 e − k t ⟹ 10 = 70 e − k t ⟹ e − k t = 1 7 30 = 20 + 70 e^{-kt} \implies 10 = 70 e^{-kt} \implies e^{-kt} = \frac{1}{7} 30 = 20 + 70 e − k t ⟹ 10 = 70 e − k t ⟹ e − k t = 7 1 − k t = ln ( 1 7 ) = − ln ( 7 ) ⟹ t = ln 7 k -kt = \ln\left(\frac{1}{7}\right) = -\ln(7) \implies t = \frac{\ln 7}{k} − k t = ln ( 7 1 ) = − ln ( 7 ) ⟹ t = k ln 7 t = ln 7 1 10 ln ( 7 / 4 ) = 10 ⋅ ln 7 ln ( 1.75 ) ≈ 10 ⋅ 1.9459 0.5596 ≈ 34.77 minutes t = \frac{\ln 7}{\frac{1}{10}\ln(7/4)} = 10 \cdot \frac{\ln 7}{\ln(1.75)} \approx 10 \cdot \frac{1.9459}{0.5596} \approx 34.77 \text{ minutes} t = 10 1 ln ( 7/4 ) ln 7 = 10 ⋅ ln ( 1.75 ) ln 7 ≈ 10 ⋅ 0.5596 1.9459 ≈ 34.77 minutes
5. Slope Fields (Direction Fields)
A slope field (or direction field) is a graphical tool used to visualize the family of solutions to a first-order differential equation d y d x = f ( x , y ) \frac{dy}{dx} = f(x, y) d x d y = f ( x , y ) without finding an explicit analytical antiderivative. Slope Field for dy/dx = y - 1
- y ^
- 3 | \ \ \ \ \ \ \ (slope m = 3 - 1 = +2)
- 2 | / / / / / / / (slope m = 2 - 1 = +1)
- 1 | - - - - - - - (slope m = 1 - 1 = 0) <--- Equilibrium Solution y = 1
- 0 | \ \ \ \ \ \ \ (slope m = 0 - 1 = -1)
- 1 | / / / / / / / (slope m = -1 - 1 = -2)
- -+-----------------------> x
- Rules for Reading & Matching Slope Fields on the CLEP
Slopes depending ONLY on x x x ( d y d x = g ( x ) \frac{dy}{dx} = g(x) d x d y = g ( x ) ):
Tangent segments are identical along any vertical column (same x x x ).
Example: d y d x = 2 x \frac{dy}{dx} = 2x d x d y = 2 x . At x = 0 x = 0 x = 0 , all slopes are horizontal ( m = 0 m=0 m = 0 ). At x = 1 x = 1 x = 1 , all slopes are m = 2 m=2 m = 2 .
Slopes depending ONLY on y y y ( d y d x = h ( y ) \frac{dy}{dx} = h(y) d x d y = h ( y ) ):
Tangent segments are identical along any horizontal row (same y y y ).
Example: d y d x = y − 1 \frac{dy}{dx} = y - 1 d x d y = y − 1 . Along the horizontal line y = 1 y = 1 y = 1 , all slopes are 0 0 0 ( equilibrium solution ).
Slopes depending on BOTH x x x and y y y ( d y d x = f ( x , y ) \frac{dy}{dx} = f(x, y) d x d y = f ( x , y ) ):
Check coordinate axes: What happens when x = 0 x = 0 x = 0 ( y y y -axis) or y = 0 y = 0 y = 0 ( x x x -axis)?
Check sign quadrants: Where is d y d x > 0 \frac{dy}{dx} > 0 d x d y > 0 (slanted up) vs d y d x < 0 \frac{dy}{dx} < 0 d x d y < 0 (slanted down)?
Example: d y d x = − x y \frac{dy}{dx} = -\frac{x}{y} d x d y = − y x . Slopes are 0 0 0 when x = 0 x = 0 x = 0 (along y y y -axis) and vertical/undefined when y = 0 y = 0 y = 0 (along x x x -axis). The solution curves form concentric circles x 2 + y 2 = C x^2 + y^2 = C x 2 + y 2 = C .
6. Comprehensive Differential Equations Comparison Table
Model / Equation Differential Form General Solution Key Characteristic
Direct Separation d y d x = g ( x ) h ( y ) \frac{dy}{dx} = \frac{g(x)}{h(y)} d x d y = h ( y ) g ( x ) ∫ h ( y ) d y = ∫ g ( x ) d x + C \int h(y) \, dy = \int g(x) \, dx + C ∫ h ( y ) d y = ∫ g ( x ) d x + C Algebraic integration on both sides
Natural Growth d y d t = k y ( k > 0 ) \frac{dy}{dt} = ky \; (k > 0) d t d y = k y ( k > 0 ) y ( t ) = y 0 e k t y(t) = y_0 e^{kt} y ( t ) = y 0 e k t Constant doubling time t d = ln 2 k t_d = \frac{\ln 2}{k} t d = k l n 2
Natural Decay d y d t = − k y ( k > 0 ) \frac{dy}{dt} = -ky \; (k > 0) d t d y = − k y ( k > 0 ) y ( t ) = y 0 e − k t y(t) = y_0 e^{-kt} y ( t ) = y 0 e − k t Constant half-life t h = ln 2 k t_h = \frac{\ln 2}{k} t h = k l n 2
Newton's Cooling d T d t = − k ( T − T env ) \frac{dT}{dt} = -k(T - T_{\text{env}}) d t d T = − k ( T − T env ) T ( t ) = T env + ( T 0 − T env ) e − k t T(t) = T_{\text{env}} + (T_0 - T_{\text{env}})e^{-kt} T ( t ) = T env + ( T 0 − T env ) e − k t Asymptotically approaches T env T_{\text{env}} T env
7. Common CLEP Pitfalls & Traps
The Denominator Differential Error: Never leave d x dx d x or d y dy d y in the denominator (e.g., writing 1 d x = … \frac{1}{dx} = \dots d x 1 = … ). Differentials must always appear in the numerators of both sides before integrating.
The Constant Exponentiation Trap: When integrating 1 y d y = k d t \frac{1}{y} \, dy = k \, dt y 1 d y = k d t , the integration yields ln ∣ y ∣ = k t + C \ln|y| = kt + C ln ∣ y ∣ = k t + C . Exponentiating gives y = e k t + C = e C e k t = A e k t y = e^{kt + C} = e^C e^{kt} = A e^{kt} y = e k t + C = e C e k t = A e k t . Writing y = e k t + C y = e^{kt} + C y = e k t + C is a critical algebraic error.
Ignoring Initial Condition Signs on Square Roots: When solving y 2 = 2 x 2 + C y^2 = 2x^2 + C y 2 = 2 x 2 + C , the explicit solution is y = ± 2 x 2 + C y = \pm \sqrt{2x^2 + C} y = ± 2 x 2 + C . You must explicitly choose + + + or − - − to match the sign of y ( x 0 ) y(x_0) y ( x 0 ) .
Confusing Natural Logarithm with Common Logarithm: Doubling time and half-life formulas require the natural logarithm ln ( 2 ) ≈ 0.693 \ln(2) \approx 0.693 ln ( 2 ) ≈ 0.693 , never the base-10 logarithm log 10 ( 2 ) ≈ 0.301 \log_{10}(2) \approx 0.301 lo g 10 ( 2 ) ≈ 0.301 .
Postponing Constant Evaluation: Always evaluate C C C immediately after performing integration. Delaying C C C until after isolating y y y frequently introduces sign and power errors.