Study guide
3.2 Basic Differentiation Rules & Rectilinear Motion
CLEP Calculus Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 About the CLEP Calculus Exam
2 Chapter 2: Limits and Continuity
2.1 Limit Concepts and Limit Laws 2.2 Algebraic Evaluation of Limits & Indeterminate Forms 2.3 Limits Involving Infinity and Asymptotes 2.4 Continuity and the Intermediate Value Theorem
3 Chapter 3: Foundations of Derivatives
3.1 The Derivative Definition and Rates of Change 3.2 Basic Differentiation Rules & Rectilinear Motion 3.3 The Product and Quotient Rules 3.4 Derivatives of Trigonometric Functions
4 Chapter 4: Advanced Differentiation Techniques
4.1 The Chain Rule 4.2 Derivatives of Exponential & Logarithmic Functions 4.3 Derivatives of Inverse Trigonometric Functions 4.4 Derivatives of Inverse Functions 4.5 Implicit Differentiation 4.6 L'Hôpital's Rule and Indeterminate Forms
5 Chapter 5: Applications of Differential Calculus
5.1 Tangent Lines, Normal Lines & Linear Approximation 5.2 Rolle's Theorem & The Mean Value Theorem 5.3 Curve Analysis & The First Derivative Test 5.4 Concavity and the Second Derivative Test 5.5 Applied Optimization Problems 5.6 Related Rates of Change
6 Chapter 6: Foundations of Integral Calculus
6.1 Antiderivatives and Indefinite Integrals 6.2 Integration by Substitution (Indefinite) 6.3 Riemann Sums and the Definite Integral 6.4 Properties of the Definite Integral
7 Chapter 7: Fundamental Theorem of Calculus & Net Change
7.1 The Fundamental Theorem of Calculus 7.2 Definite Integrals via Substitution 7.3 The Net Change Theorem & Rectilinear Particle Motion
8 Chapter 8: Applications of Integrals & Differential Equations
8.1 Area Between Curves 8.2 Volumes of Solids of Revolution 8.3 Average Value of a Function & The Mean Value Theorem for Integrals 8.4 Separable Differential Equations & Growth/Decay Models
3.2 Basic Differentiation Rules & Rectilinear Motion
Key Takeaways Explain This Topic AI
The Power Rule states d/dx[x^n] = n*x^(n-1) for all real powers n, including negative, fractional, and irrational exponents.
Differentiation is a linear operator: d/dx[c f(x)] = c f'(x) and d/dx[f(x) ± g(x)] = f'(x) ± g'(x).
Higher-order derivatives are found by repeated differentiation; the (n+1)-th derivative of an n-th degree polynomial is identically zero.
In rectilinear particle motion, position is s(t), velocity is v(t) = s'(t), speed is |v(t)|, and acceleration is a(t) = v'(t) = s''(t).
A particle speeds up when velocity and acceleration have the SAME sign (v a > 0), and slows down when they have OPPOSITE signs (v a < 0).
Last updated: August 2026
3.2 Basic Differentiation Rules & Rectilinear Motion
Quick Answer: The fundamental differentiation rules eliminate the need for computing limits directly on algebraic functions. The Power Rule d d x [ x n ] = n x n − 1 \frac{d}{dx}[x^n] = n x^{n-1} d x d [ x n ] = n x n − 1 applies to all real exponents. In physics and particle kinematics, differentiating position s ( t ) s(t) s ( t ) yields velocity v ( t ) = s ′ ( t ) v(t) = s'(t) v ( t ) = s ′ ( t ) , speed is ∣ v ( t ) ∣ |v(t)| ∣ v ( t ) ∣ , and differentiating velocity yields acceleration a ( t ) = v ′ ( t ) = s ′ ′ ( t ) a(t) = v'(t) = s''(t) a ( t ) = v ′ ( t ) = s ′′ ( t ) . A particle is speeding up when v ( t ) v(t) v ( t ) and a ( t ) a(t) a ( t ) share the same sign, and slowing down when they have opposite signs.
1. Fundamental Differentiation Rules
Applying the limit definition to standard algebraic structures yields five primary operational rules.
The Constant Rule
The derivative of any constant value c ∈ R c \in \mathbb{R} c ∈ R is zero: d d x [ c ] = 0 \frac{d}{dx}[c] = 0 d x d [ c ] = 0
Geometric intuition: The graph of y = c y = c y = c is a horizontal line with slope m = 0 m = 0 m = 0 everywhere.
The General Power Rule
For any real exponent n ∈ R n \in \mathbb{R} n ∈ R : d d x [ x n ] = n x n − 1 \frac{d}{dx}[x^n] = n x^{n-1} d x d [ x n ] = n x n − 1
To apply the Power Rule effectively on the CLEP exam, first rewrite radical and rational expressions into standard power forms x n x^n x n :
Radical expressions: x = x 1 / 2 \sqrt{x} = x^{1/2} x = x 1/2 , x 3 = x 1 / 3 \sqrt[3]{x} = x^{1/3} 3 x = x 1/3 , x p q = x p / q \sqrt[q]{x^p} = x^{p/q} q x p = x p / q
Reciprocal expressions: 1 x = x − 1 \frac{1}{x} = x^{-1} x 1 = x − 1 , 1 x 4 = x − 4 \frac{1}{x^4} = x^{-4} x 4 1 = x − 4 , 1 x = x − 1 / 2 \frac{1}{\sqrt{x}} = x^{-1/2} x 1 = x − 1/2
- Combined rational radicals: 7 x 2 3 = 7 x − 2 / 3 \frac{7}{\sqrt[3]{x^2}} = 7x^{-2/3} 3 x 2 7 = 7 x − 2/3
- The Constant Multiple Rule
A multiplicative constant factors out of the derivative: d d x [ c ⋅ f ( x ) ] = c ⋅ d d x [ f ( x ) ] = c ⋅ f ′ ( x ) \frac{d}{dx}[c \cdot f(x)] = c \cdot \frac{d}{dx}[f(x)] = c \cdot f'(x) d x d [ c ⋅ f ( x )] = c ⋅ d x d [ f ( x )] = c ⋅ f ′ ( x )
The Sum and Difference Rules
The derivative of a sum or difference of differentiable functions is the sum or difference of their individual derivatives: d d x [ f ( x ) + g ( x ) ] = f ′ ( x ) + g ′ ( x ) \frac{d}{dx}[f(x) + g(x)] = f'(x) + g'(x) d x d [ f ( x ) + g ( x )] = f ′ ( x ) + g ′ ( x ) d d x [ f ( x ) − g ( x ) ] = f ′ ( x ) − g ′ ( x ) \frac{d}{dx}[f(x) - g(x)] = f'(x) - g'(x) d x d [ f ( x ) − g ( x )] = f ′ ( x ) − g ′ ( x )
Combining these rules demonstrates that differentiation is a linear operator : d d x [ a f ( x ) + b g ( x ) ] = a f ′ ( x ) + b g ′ ( x ) \frac{d}{dx}[a f(x) + b g(x)] = a f'(x) + b g'(x) d x d [ a f ( x ) + b g ( x )] = a f ′ ( x ) + b g ′ ( x )
2. Higher-Order Derivatives
Differentiating a function y = f ( x ) y = f(x) y = f ( x ) produces the first derivative f ′ ( x ) f'(x) f ′ ( x ) . Differentiating f ′ ( x ) f'(x) f ′ ( x ) yields the second derivative , and repeated differentiation yields higher-order derivatives .
- Order Lagrange Notation Leibniz Notation Prime / Dot Notation Physical Meaning
- 0th f ( x ) f(x) f ( x ) y y y y y y Position s ( t ) s(t) s ( t )
1st f ′ ( x ) f'(x) f ′ ( x ) d y d x \frac{dy}{dx} d x d y or d d x [ y ] \frac{d}{dx}[y] d x d [ y ] y ′ y' y ′ Velocity v ( t ) v(t) v ( t )
2nd f ′ ′ ( x ) f''(x) f ′′ ( x ) d 2 y d x 2 \frac{d^2 y}{dx^2} d x 2 d 2 y or d 2 d x 2 [ y ] \frac{d^2}{dx^2}[y] d x 2 d 2 [ y ] y ′ ′ y'' y ′′ Acceleration a ( t ) a(t) a ( t )
3rd f ′ ′ ′ ( x ) f'''(x) f ′′′ ( x ) d 3 y d x 3 \frac{d^3 y}{dx^3} d x 3 d 3 y y ′ ′ ′ y''' y ′′′ Jerk j ( t ) j(t) j ( t )
n n n -th f ( n ) ( x ) f^{(n)}(x) f ( n ) ( x ) d n y d x n \frac{d^n y}{dx^n} d x n d n y y ( n ) y^{(n)} y ( n ) n n n -th rate of change
Key Property (Polynomial Termination): If P ( x ) P(x) P ( x ) is a polynomial of degree n n n , then its n n n -th derivative P ( n ) ( x ) P^{(n)}(x) P ( n ) ( x ) is a constant ( n ! ⋅ a n n! \cdot a_n n ! ⋅ a n ), and every derivative of order higher than n n n is identically zero: P ( k ) ( x ) = 0 for all k > n P^{(k)}(x) = 0 \quad \text{for all } k > n P ( k ) ( x ) = 0 for all k > n
3. Rectilinear Particle Motion Along a Line
Rectilinear motion describes the one-dimensional movement of an object along a coordinate axis (typically the s s s -axis or x x x -axis) as a function of time t ≥ 0 t \ge 0 t ≥ 0 . Rectilinear Motion Kinematics
- │
- Position: s(t) ──────────────────────────┼───> Location along the axis
- │ (d/dt)
- ▼
- Velocity: v(t) = s'(t) ──────────────────┼───> Directed rate of change
- │ (d/dt) • v > 0: Moving right / forward
- ▼ • v < 0: Moving left / backward
- Acceleration: a(t) = v'(t) = s''(t) ─────┼───> • v = 0: Stopped / changing direction
- Speed: |v(t)| = |s'(t)| ─────────────────┴───> Magnitude of velocity (scalar ≥ 0)
- Kinematic Definitions
Position s ( t ) s(t) s ( t ) : The directed coordinate location of the particle relative to the origin at time t t t .
Displacement over [ t 1 , t 2 ] [t_1, t_2] [ t 1 , t 2 ] : The net change in position: Δ s = s ( t 2 ) − s ( t 1 ) \Delta s = s(t_2) - s(t_1) Δ s = s ( t 2 ) − s ( t 1 )
Velocity v ( t ) v(t) v ( t ) : The instantaneous rate of change of position with respect to time: v ( t ) = d s d t = s ′ ( t ) v(t) = \frac{ds}{dt} = s'(t) v ( t ) = d t d s = s ′ ( t )
- Moving Forward / Right: v ( t ) > 0 v(t) > 0 v ( t ) > 0
- Moving Backward / Left: v ( t ) < 0 v(t) < 0 v ( t ) < 0
- At Rest / Stopped: v ( t ) = 0 v(t) = 0 v ( t ) = 0
Changes Direction: v ( t ) v(t) v ( t ) changes sign (crosses zero from positive to negative or vice versa).
Speed: The absolute magnitude of velocity (always non-negative): Speed = ∣ v ( t ) ∣ = ∣ s ′ ( t ) ∣ \text{Speed} = |v(t)| = |s'(t)| Speed = ∣ v ( t ) ∣ = ∣ s ′ ( t ) ∣
Acceleration a ( t ) a(t) a ( t ) : The instantaneous rate of change of velocity with respect to time: a ( t ) = d v d t = v ′ ( t ) = d 2 s d t 2 = s ′ ′ ( t ) a(t) = \frac{dv}{dt} = v'(t) = \frac{d^2 s}{dt^2} = s''(t) a ( t ) = d t d v = v ′ ( t ) = d t 2 d 2 s = s ′′ ( t )
4. Speeding Up vs. Slowing Down: The Golden Rule
A critical concept on the CLEP Calculus exam is analyzing when a moving object is speeding up or slowing down.
The Sign Rule for Speed:
A particle is SPEEDING UP if and only if velocity v ( t ) v(t) v ( t ) and acceleration a ( t ) a(t) a ( t ) have the SAME SIGN ( v ( t ) ⋅ a ( t ) > 0 v(t) \cdot a(t) > 0 v ( t ) ⋅ a ( t ) > 0 ).
A particle is SLOWING DOWN if and only if velocity v ( t ) v(t) v ( t ) and acceleration a ( t ) a(t) a ( t ) have OPPOSITE SIGNS ( v ( t ) ⋅ a ( t ) < 0 v(t) \cdot a(t) < 0 v ( t ) ⋅ a ( t ) < 0 ).
Velocity v ( t ) v(t) v ( t ) Acceleration a ( t ) a(t) a ( t ) Product v ( t ) ⋅ a ( t ) v(t) \cdot a(t) v ( t ) ⋅ a ( t ) Motion State Intuitive Physical Meaning
Positive ( > 0 >0 > 0 ) Positive ( > 0 >0 > 0 ) Positive ( > 0 >0 > 0 ) Speeding up Moving forward and being pushed forward
Positive ( > 0 >0 > 0 ) Negative ( < 0 <0 < 0 ) Negative ( < 0 <0 < 0 ) Slowing down Moving forward while brakes are applied
Negative ( < 0 <0 < 0 ) Negative ( < 0 <0 < 0 ) Positive ( > 0 >0 > 0 ) Speeding up Moving backward and accelerating backward
Negative ( < 0 <0 < 0 ) Positive ( > 0 >0 > 0 ) Negative ( < 0 <0 < 0 ) Slowing down Moving backward while force pulls forward
Common Student Trap: Acceleration being negative does not automatically mean the particle is slowing down! If v ( t ) = − 8 m/s v(t) = -8\text{ m/s} v ( t ) = − 8 m/s and a ( t ) = − 4 m/s 2 a(t) = -4\text{ m/s}^2 a ( t ) = − 4 m/s 2 , the speed ∣ v ( t ) ∣ |v(t)| ∣ v ( t ) ∣ is increasing from 8 m/s 8\text{ m/s} 8 m/s to 12 m/s 12\text{ m/s} 12 m/s in the negative direction.
5. Step-by-Step Worked Kinematic Example
Problem: A particle moves along a horizontal axis with position function s ( t ) = t 3 − 6 t 2 + 9 t + 2 , t ≥ 0 s(t) = t^3 - 6t^2 + 9t + 2, \quad t \ge 0 s ( t ) = t 3 − 6 t 2 + 9 t + 2 , t ≥ 0
Step 1: Find Velocity and Acceleration Functions
v ( t ) = s ′ ( t ) = 3 t 2 − 12 t + 9 = 3 ( t 2 − 4 t + 3 ) = 3 ( t − 1 ) ( t − 3 ) v(t) = s'(t) = 3t^2 - 12t + 9 = 3(t^2 - 4t + 3) = 3(t - 1)(t - 3) v ( t ) = s ′ ( t ) = 3 t 2 − 12 t + 9 = 3 ( t 2 − 4 t + 3 ) = 3 ( t − 1 ) ( t − 3 )
a ( t ) = v ′ ( t ) = 6 t − 12 = 6 ( t − 2 ) a(t) = v'(t) = 6t - 12 = 6(t - 2) a ( t ) = v ′ ( t ) = 6 t − 12 = 6 ( t − 2 )
Step 2: Determine When the Particle is at Rest and Direction Intervals
Set v ( t ) = 0 ⟹ 3 ( t − 1 ) ( t − 3 ) = 0 ⟹ t = 1 v(t) = 0 \implies 3(t-1)(t-3) = 0 \implies t = 1 v ( t ) = 0 ⟹ 3 ( t − 1 ) ( t − 3 ) = 0 ⟹ t = 1 and t = 3 t = 3 t = 3 .
Interval [ 0 , 1 ) [0, 1) [ 0 , 1 ) : v ( 0.5 ) = 3 ( − 0.5 ) ( − 2.5 ) > 0 ⟹ v(0.5) = 3(-0.5)(-2.5) > 0 \implies v ( 0.5 ) = 3 ( − 0.5 ) ( − 2.5 ) > 0 ⟹ Particle moves right .
Interval ( 1 , 3 ) (1, 3) ( 1 , 3 ) : v ( 2 ) = 3 ( 1 ) ( − 1 ) < 0 ⟹ v(2) = 3(1)(-1) < 0 \implies v ( 2 ) = 3 ( 1 ) ( − 1 ) < 0 ⟹ Particle moves left .
Interval ( 3 , ∞ ) (3, \infty) ( 3 , ∞ ) : v ( 4 ) = 3 ( 3 ) ( 1 ) > 0 ⟹ v(4) = 3(3)(1) > 0 \implies v ( 4 ) = 3 ( 3 ) ( 1 ) > 0 ⟹ Particle moves right .
Direction changes occur at t = 1 t = 1 t = 1 and t = 3 t = 3 t = 3 .
Step 3: Determine Speeding Up and Slowing Down Intervals
Construct a simultaneous sign chart for v ( t ) v(t) v ( t ) and a ( t ) a(t) a ( t ) with key partition points t = 1 , 2 , 3 t = 1, 2, 3 t = 1 , 2 , 3 :
Interval Sign of v ( t ) v(t) v ( t ) Sign of a ( t ) = 6 ( t − 2 ) a(t) = 6(t-2) a ( t ) = 6 ( t − 2 ) Sign of v ( t ) ⋅ a ( t ) v(t) \cdot a(t) v ( t ) ⋅ a ( t ) Motion Behavior
- ( 0 , 1 ) (0, 1) ( 0 , 1 ) + + + − - − ( 6 ( 0.5 − 2 ) < 0 6(0.5-2) < 0 6 ( 0.5 − 2 ) < 0 ) − - − Slowing down
- ( 1 , 2 ) (1, 2) ( 1 , 2 ) − - − − - − ( 6 ( 1.5 − 2 ) < 0 6(1.5-2) < 0 6 ( 1.5 − 2 ) < 0 ) + + + Speeding up
- ( 2 , 3 ) (2, 3) ( 2 , 3 ) − - − + + + ( 6 ( 2.5 − 2 ) > 0 6(2.5-2) > 0 6 ( 2.5 − 2 ) > 0 ) − - − Slowing down
- ( 3 , ∞ ) (3, \infty) ( 3 , ∞ ) + + + + + + ( 6 ( 4 − 2 ) > 0 6(4-2) > 0 6 ( 4 − 2 ) > 0 ) + + + Speeding up
Conclusion: The particle is speeding up on ( 1 , 2 ) ∪ ( 3 , ∞ ) (1, 2) \cup (3, \infty) ( 1 , 2 ) ∪ ( 3 , ∞ ) and slowing down on ( 0 , 1 ) ∪ ( 2 , 3 ) (0, 1) \cup (2, 3) ( 0 , 1 ) ∪ ( 2 , 3 ) .
Step 4: Total Distance Traveled vs. Displacement on [ 0 , 4 ] [0, 4] [ 0 , 4 ]
Displacement: Δ s = s ( 4 ) − s ( 0 ) = [ ( 4 ) 3 − 6 ( 4 ) 2 + 9 ( 4 ) + 2 ] − [ 2 ] = [ 64 − 96 + 36 + 2 ] − 2 = 6 − 2 = 4 \Delta s = s(4) - s(0) = [(4)^3 - 6(4)^2 + 9(4) + 2] - [2] = [64 - 96 + 36 + 2] - 2 = 6 - 2 = 4 Δ s = s ( 4 ) − s ( 0 ) = [( 4 ) 3 − 6 ( 4 ) 2 + 9 ( 4 ) + 2 ] − [ 2 ] = [ 64 − 96 + 36 + 2 ] − 2 = 6 − 2 = 4 .
Total Distance Traveled: Must split the path at turning points t = 1 t = 1 t = 1 and t = 3 t = 3 t = 3 :
s ( 0 ) = 2 s(0) = 2 s ( 0 ) = 2
s ( 1 ) = ( 1 ) 3 − 6 ( 1 ) 2 + 9 ( 1 ) + 2 = 6 s(1) = (1)^3 - 6(1)^2 + 9(1) + 2 = 6 s ( 1 ) = ( 1 ) 3 − 6 ( 1 ) 2 + 9 ( 1 ) + 2 = 6
s ( 3 ) = ( 3 ) 3 − 6 ( 3 ) 2 + 9 ( 3 ) + 2 = 2 s(3) = (3)^3 - 6(3)^2 + 9(3) + 2 = 2 s ( 3 ) = ( 3 ) 3 − 6 ( 3 ) 2 + 9 ( 3 ) + 2 = 2
s ( 4 ) = 6 s(4) = 6 s ( 4 ) = 6 Total Distance = ∣ s ( 1 ) − s ( 0 ) ∣ + ∣ s ( 3 ) − s ( 1 ) ∣ + ∣ s ( 4 ) − s ( 3 ) ∣ = ∣ 6 − 2 ∣ + ∣ 2 − 6 ∣ + ∣ 6 − 2 ∣ = 4 + 4 + 4 = 12 \text{Total Distance} = |s(1) - s(0)| + |s(3) - s(1)| + |s(4) - s(3)| = |6 - 2| + |2 - 6| + |6 - 2| = 4 + 4 + 4 = 12 Total Distance = ∣ s ( 1 ) − s ( 0 ) ∣ + ∣ s ( 3 ) − s ( 1 ) ∣ + ∣ s ( 4 ) − s ( 3 ) ∣ = ∣6 − 2∣ + ∣2 − 6∣ + ∣6 − 2∣ = 4 + 4 + 4 = 12
6. CLEP Exam Tips
Tip 1: Always rewrite negative and fractional powers before applying the Power Rule.
Tip 2: When asked for "speed at t = c t = c t = c ", remember speed is ∣ v ( c ) ∣ |v(c)| ∣ v ( c ) ∣ and can never be negative.
Tip 3: For total distance, always find where v ( t ) = 0 v(t) = 0 v ( t ) = 0 in the interval and sum the absolute values of the separate segment displacements.