Study guide
7.3 The Net Change Theorem & Rectilinear Particle Motion
CLEP Calculus Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 About the CLEP Calculus Exam
2 Chapter 2: Limits and Continuity
2.1 Limit Concepts and Limit Laws 2.2 Algebraic Evaluation of Limits & Indeterminate Forms 2.3 Limits Involving Infinity and Asymptotes 2.4 Continuity and the Intermediate Value Theorem
3 Chapter 3: Foundations of Derivatives
3.1 The Derivative Definition and Rates of Change 3.2 Basic Differentiation Rules & Rectilinear Motion 3.3 The Product and Quotient Rules 3.4 Derivatives of Trigonometric Functions
4 Chapter 4: Advanced Differentiation Techniques
4.1 The Chain Rule 4.2 Derivatives of Exponential & Logarithmic Functions 4.3 Derivatives of Inverse Trigonometric Functions 4.4 Derivatives of Inverse Functions 4.5 Implicit Differentiation 4.6 L'Hôpital's Rule and Indeterminate Forms
5 Chapter 5: Applications of Differential Calculus
5.1 Tangent Lines, Normal Lines & Linear Approximation 5.2 Rolle's Theorem & The Mean Value Theorem 5.3 Curve Analysis & The First Derivative Test 5.4 Concavity and the Second Derivative Test 5.5 Applied Optimization Problems 5.6 Related Rates of Change
6 Chapter 6: Foundations of Integral Calculus
6.1 Antiderivatives and Indefinite Integrals 6.2 Integration by Substitution (Indefinite) 6.3 Riemann Sums and the Definite Integral 6.4 Properties of the Definite Integral
7 Chapter 7: Fundamental Theorem of Calculus & Net Change
7.1 The Fundamental Theorem of Calculus 7.2 Definite Integrals via Substitution 7.3 The Net Change Theorem & Rectilinear Particle Motion
8 Chapter 8: Applications of Integrals & Differential Equations
8.1 Area Between Curves 8.2 Volumes of Solids of Revolution 8.3 Average Value of a Function & The Mean Value Theorem for Integrals 8.4 Separable Differential Equations & Growth/Decay Models
7.3 The Net Change Theorem & Rectilinear Particle Motion
Key Takeaways Explain This Topic AI
The Net Change Theorem establishes that the definite integral of a rate of change equals the total net change: int_a^b F'(t) dt = F(b) - F(a), yielding the future state formula F(b) = F(a) + int_a^b F'(t) dt.
In rectilinear kinematics, integrating acceleration produces velocity v(t) = v(t_0) + int_{t_0}^t a(u) du, and integrating velocity produces position s(t) = s(t_0) + int_{t_0}^t v(u) du.
Displacement measures signed net position change (Delta s = int_{t_1}^{t_2} v(t) dt), whereas Total Distance Traveled measures cumulative physical path length (int_{t_1}^{t_2} |v(t)| dt >= 0).
To calculate total distance without a calculator, solve v(t) = 0 for turning points in (t_1, t_2), partition the interval into unidirectional segments, and sum the absolute values of the sub-displacements: Total Distance = sum |Delta s_k|.
On Section 2 (calculator-active), displacement is computed via fnInt(Y1, X, t1, t2) while total distance requires the absolute value function fnInt(abs(Y1), X, t1, t2).
Last updated: August 2026
7.3 The Net Change Theorem & Rectilinear Particle Motion
Core CLEP Concept: The Net Change Theorem is the direct physical interpretation of the Fundamental Theorem of Calculus. It asserts that integrating the rate of change of any quantity computes the net change in that quantity . In physics, engineering, and economics, this theorem enables us to compute final state values from initial conditions and rate functions. On the CLEP Calculus exam, Net Change is most frequently tested through rectilinear particle kinematics —distinguishing between signed displacement and non-negative total distance traveled across both non-calculator and graphing calculator sections.
1. The Net Change Theorem & Future State Modeling
The formal statement of the Net Change Theorem reformulates FTC Part 2 in terms of rates of change.
Theorem (The Net Change Theorem): The definite integral of a rate of change F ′ ( t ) F'(t) F ′ ( t ) over a time interval [ a , b ] [a, b] [ a , b ] equals the net change in the original quantity F ( t ) F(t) F ( t ) : ∫ a b F ′ ( t ) d t = F ( b ) − F ( a ) \int_a^b F'(t) \, dt = F(b) - F(a) ∫ a b F ′ ( t ) d t = F ( b ) − F ( a )
The Accumulation / Future State Formula
Rearranging the theorem isolates the final quantity F ( b ) F(b) F ( b ) : F ( b ) = F ( a ) + ∫ a b F ′ ( t ) d t F(b) = F(a) + \int_a^b F'(t) \, dt F ( b ) = F ( a ) + ∫ a b F ′ ( t ) d t Final State at time b = Initial State at time a + Net Accumulated Change on [ a , b ] \text{Final State at time } b = \text{Initial State at time } a + \text{Net Accumulated Change on } [a, b] Final State at time b = Initial State at time a + Net Accumulated Change on [ a , b ] [ Current Quantity F(b) ] = [ Starting Value F(a) ] + / b [ Rate of Change F'(t) ] dt
- / a
- Real-World Applications of Net Change
Fluid Dynamics / Reservoir Storage: If water enters a tank at rate R in ( t ) R_{\text{in}}(t) R in ( t ) and drains at rate R out ( t ) R_{\text{out}}(t) R out ( t ) , the net rate of change is V ′ ( t ) = R in ( t ) − R out ( t ) V'(t) = R_{\text{in}}(t) - R_{\text{out}}(t) V ′ ( t ) = R in ( t ) − R out ( t ) . The volume at time t 2 t_2 t 2 is: V ( t 2 ) = V ( t 1 ) + ∫ t 1 t 2 [ R in ( t ) − R out ( t ) ] d t V(t_2) = V(t_1) + \int_{t_1}^{t_2} \left[ R_{\text{in}}(t) - R_{\text{out}}(t) \right] dt V ( t 2 ) = V ( t 1 ) + ∫ t 1 t 2 [ R in ( t ) − R out ( t ) ] d t
Population Dynamics: If a population changes at rate P ′ ( t ) = Births ( t ) − Deaths ( t ) P'(t) = \text{Births}(t) - \text{Deaths}(t) P ′ ( t ) = Births ( t ) − Deaths ( t ) , the population at time t t t is: P ( t ) = P ( 0 ) + ∫ 0 t P ′ ( u ) d u P(t) = P(0) + \int_0^t P'(u) \, du P ( t ) = P ( 0 ) + ∫ 0 t P ′ ( u ) d u
Thermal Energy / Temperature: If an object heats or cools at rate T ′ ( t ) T'(t) T ′ ( t ) , its temperature at time t t t is: T ( t ) = T ( 0 ) + ∫ 0 t T ′ ( u ) d u T(t) = T(0) + \int_0^t T'(u) \, du T ( t ) = T ( 0 ) + ∫ 0 t T ′ ( u ) d u
Economic Total Cost from Marginal Cost: If C ′ ( x ) C'(x) C ′ ( x ) represents marginal cost, the cost of increasing production from x 1 x_1 x 1 to x 2 x_2 x 2 units is: Δ C = ∫ x 1 x 2 C ′ ( x ) d x = C ( x 2 ) − C ( x 1 ) \Delta C = \int_{x_1}^{x_2} C'(x) \, dx = C(x_2) - C(x_1) Δ C = ∫ x 1 x 2 C ′ ( x ) d x = C ( x 2 ) − C ( x 1 )
2. Rectilinear Kinematics Hierarchy: Position, Velocity, Acceleration
In one-dimensional (rectilinear) particle motion along a coordinate axis, the relationship between position s ( t ) s(t) s ( t ) , velocity v ( t ) v(t) v ( t ) , speed ∣ v ( t ) ∣ |v(t)| ∣ v ( t ) ∣ , and acceleration a ( t ) a(t) a ( t ) forms a two-way calculus hierarchy: DIFFERENTIATION (d/dt) INTEGRATION (int ... dt)
- Position s(t) ------------------> Velocity v(t) ------------------> Acceleration a(t)
- <----------------- <-----------------
- Position s(t) = Velocity v(t) =
- s(t_0) + int v dt v(t_0) + int a dt
- Reconstructing Velocity and Position Initial Value Problems
Given acceleration a ( t ) a(t) a ( t ) and initial velocity v ( t 0 ) v(t_0) v ( t 0 ) : v ( t ) = v ( t 0 ) + ∫ t 0 t a ( u ) d u v(t) = v(t_0) + \int_{t_0}^t a(u) \, du v ( t ) = v ( t 0 ) + ∫ t 0 t a ( u ) d u
Given velocity v ( t ) v(t) v ( t ) and initial position s ( t 0 ) s(t_0) s ( t 0 ) : s ( t ) = s ( t 0 ) + ∫ t 0 t v ( u ) d u s(t) = s(t_0) + \int_{t_0}^t v(u) \, du s ( t ) = s ( t 0 ) + ∫ t 0 t v ( u ) d u
3. Displacement vs. Total Distance Traveled
The distinction between displacement and total distance traveled is one of the most heavily tested concepts on the CLEP Calculus exam. Motion of Particle:
Starts at s(0)=5 ---> moves right to s(1)=9 ---> reverses left to s(3)=5 ---> moves right to s(4)=9
- <--------------------------- (Moves Left: Delta s_2 = -4)
- ---+------+------+------+------+------+------+------+------+------+----> Coordinate Line s
- 0 1 2 3 4 5 6 7 8 9
- s(0),s(3) s(1),s(4)
- ---------------------------------> ---------->
- (Moves Right: Delta s_1 = +4) (Moves Right: Delta s_3 = +4)
- Displacement = s(4) - s(0) = 9 - 5 = +4 (Net shift from start to end)
- Total Distance = |+4| + |-4| + |+4| = 4 + 4 + 4 = 12 (Total odometer mileage)
- Comparative Summary Table
Parameter Mathematical Definition Geometric Meaning on v ( t ) v(t) v ( t ) Graph Sign Properties
Displacement ( Δ s \Delta s Δ s ) Δ s = ∫ t 1 t 2 v ( t ) d t = s ( t 2 ) − s ( t 1 ) \Delta s = \int_{t_1}^{t_2} v(t) \, dt = s(t_2) - s(t_1) Δ s = ∫ t 1 t 2 v ( t ) d t = s ( t 2 ) − s ( t 1 ) Net signed area (Area above t t t -axis minus Area below t t t -axis) Can be positive, negative, or zero
Total Distance Distance = ∫ t 1 t 2 ∣ v ( t ) ∣ d t = ∫ t 1 t 2 Speed ( t ) d t \text{Distance} = \int_{t_1}^{t_2} \vert v(t)\vert\, dt = \int_{t_1}^{t_2} \text{Speed}(t) \, dt Distance = ∫ t 1 t 2 ∣ v ( t ) ∣ d t = ∫ t 1 t 2 Speed ( t ) d t Total geometric area (All regions treated as positive area) Always non-negative ( ≥ 0 \ge 0 ≥ 0 )
Fundamental Kinematic Inequality
For any motion over [ t 1 , t 2 ] [t_1, t_2] [ t 1 , t 2 ] : Total Distance Traveled ≥ ∣ Displacement ∣ \text{Total Distance Traveled} \ge |\text{Displacement}| Total Distance Traveled ≥ ∣ Displacement ∣
Equality holds ( Total Distance = ∣ Displacement ∣ \text{Total Distance} = |\text{Displacement}| Total Distance = ∣ Displacement ∣ ) if and only if the particle moves in a single direction without reversing—meaning v ( t ) v(t) v ( t ) never changes sign on [ t 1 , t 2 ] [t_1, t_2] [ t 1 , t 2 ] .
4. The 4-Step Analytical Algorithm for Total Distance (Non-Calculator)
When evaluating total distance without a graphing calculator, follow this systematic protocol:
Step 1: Find All Turning Points
Set v ( t ) = 0 v(t) = 0 v ( t ) = 0 and solve for all critical roots t c t_c t c strictly inside the open interval ( t 1 , t 2 ) (t_1, t_2) ( t 1 , t 2 ) . These roots represent potential points where the particle changes direction.
Step 2: Partition the Domain into Subintervals
Subdivide [ t 1 , t 2 ] [t_1, t_2] [ t 1 , t 2 ] at each real turning point: [ t 1 , t c 1 ] , [ t c 1 , t c 2 ] , … , [ t c n , t 2 ] [t_1, t_{c1}], \quad [t_{c1}, t_{c2}], \quad \dots, \quad [t_{cn}, t_2] [ t 1 , t c 1 ] , [ t c 1 , t c 2 ] , … , [ t c n , t 2 ]
On each subinterval, the velocity maintains a constant sign (the particle travels purely forward or purely backward).
Step 3: Compute Sub-Displacements
Calculate the signed displacement on each subinterval using the position function: Δ s k = s ( t end ) − s ( t start ) = ∫ t start t end v ( t ) d t \Delta s_k = s(t_{\text{end}}) - s(t_{\text{start}}) = \int_{t_{\text{start}}}^{t_{\text{end}}} v(t) \, dt Δ s k = s ( t end ) − s ( t start ) = ∫ t start t end v ( t ) d t
Step 4: Sum the Absolute Values of All Sub-Displacements
Add the absolute values of the individual segments: Total Distance = ∣ Δ s 1 ∣ + ∣ Δ s 2 ∣ + ⋯ + ∣ Δ s n ∣ \text{Total Distance} = |\Delta s_1| + |\Delta s_2| + \dots + |\Delta s_n| Total Distance = ∣Δ s 1 ∣ + ∣Δ s 2 ∣ + ⋯ + ∣Δ s n ∣
- 5. Comprehensive Step-by-Step Kinematic Case Studies
- Case Study 1: Complete Non-Calculator Kinematics Analysis
Problem: A particle moves along a horizontal axis with velocity v ( t ) = 6 t 2 − 18 t + 12 v(t) = 6t^2 - 18t + 12 v ( t ) = 6 t 2 − 18 t + 12 meters per second for 0 ≤ t ≤ 3 0 \le t \le 3 0 ≤ t ≤ 3 . The particle's initial position at t = 0 t = 0 t = 0 is s ( 0 ) = 4 s(0) = 4 s ( 0 ) = 4 meters.
Find the position function s ( t ) s(t) s ( t ) .
Determine the displacement of the particle over [ 0 , 3 ] [0, 3] [ 0 , 3 ] .
Compute the total distance traveled by the particle over [ 0 , 3 ] [0, 3] [ 0 , 3 ] .
Determine the time intervals when the particle is speeding up and slowing down.
Part 1: Position Function s ( t ) s(t) s ( t ) s ( t ) = s ( 0 ) + ∫ 0 t ( 6 u 2 − 18 u + 12 ) d u = 4 + [ 2 u 3 − 9 u 2 + 12 u ] 0 t = 2 t 3 − 9 t 2 + 12 t + 4 s(t) = s(0) + \int_0^t (6u^2 - 18u + 12) \, du = 4 + [2u^3 - 9u^2 + 12u]_0^t = 2t^3 - 9t^2 + 12t + 4 s ( t ) = s ( 0 ) + ∫ 0 t ( 6 u 2 − 18 u + 12 ) d u = 4 + [ 2 u 3 − 9 u 2 + 12 u ] 0 t = 2 t 3 − 9 t 2 + 12 t + 4
Part 2: Displacement on [ 0 , 3 ] [0, 3] [ 0 , 3 ] Displacement = ∫ 0 3 v ( t ) d t = s ( 3 ) − s ( 0 ) \text{Displacement} = \int_0^3 v(t) \, dt = s(3) - s(0) Displacement = ∫ 0 3 v ( t ) d t = s ( 3 ) − s ( 0 ) s ( 3 ) = 2 ( 3 ) 3 − 9 ( 3 ) 2 + 12 ( 3 ) + 4 = 2 ( 27 ) − 9 ( 9 ) + 36 + 4 = 54 − 81 + 40 = 13 s(3) = 2(3)^3 - 9(3)^2 + 12(3) + 4 = 2(27) - 9(9) + 36 + 4 = 54 - 81 + 40 = 13 s ( 3 ) = 2 ( 3 ) 3 − 9 ( 3 ) 2 + 12 ( 3 ) + 4 = 2 ( 27 ) − 9 ( 9 ) + 36 + 4 = 54 − 81 + 40 = 13 Displacement = 13 − 4 = + 9 meters \text{Displacement} = 13 - 4 = +9 \text{ meters} Displacement = 13 − 4 = + 9 meters
Part 3: Total Distance Traveled on [ 0 , 3 ] [0, 3] [ 0 , 3 ]
Step 1 (Find turning points): Set v ( t ) = 6 ( t 2 − 3 t + 2 ) = 6 ( t − 1 ) ( t − 2 ) = 0 ⟹ t = 1 , t = 2 v(t) = 6(t^2 - 3t + 2) = 6(t - 1)(t - 2) = 0 \implies t = 1, t = 2 v ( t ) = 6 ( t 2 − 3 t + 2 ) = 6 ( t − 1 ) ( t − 2 ) = 0 ⟹ t = 1 , t = 2 . Both lie in ( 0 , 3 ) (0, 3) ( 0 , 3 ) .
Step 2 (Partition intervals): [ 0 , 1 ] [0, 1] [ 0 , 1 ] , [ 1 , 2 ] [1, 2] [ 1 , 2 ] , and [ 2 , 3 ] [2, 3] [ 2 , 3 ] .
Step 3 (Evaluate position at all boundary points):
s ( 0 ) = 4 s(0) = 4 s ( 0 ) = 4
s ( 1 ) = 2 ( 1 ) 3 − 9 ( 1 ) 2 + 12 ( 1 ) + 4 = 2 − 9 + 12 + 4 = 9 ⟹ Δ s 1 = 9 − 4 = + 5 s(1) = 2(1)^3 - 9(1)^2 + 12(1) + 4 = 2 - 9 + 12 + 4 = 9 \implies \Delta s_1 = 9 - 4 = +5 s ( 1 ) = 2 ( 1 ) 3 − 9 ( 1 ) 2 + 12 ( 1 ) + 4 = 2 − 9 + 12 + 4 = 9 ⟹ Δ s 1 = 9 − 4 = + 5
s ( 2 ) = 2 ( 2 ) 3 − 9 ( 2 ) 2 + 12 ( 2 ) + 4 = 16 − 36 + 24 + 4 = 8 ⟹ Δ s 2 = 8 − 9 = − 1 s(2) = 2(2)^3 - 9(2)^2 + 12(2) + 4 = 16 - 36 + 24 + 4 = 8 \implies \Delta s_2 = 8 - 9 = -1 s ( 2 ) = 2 ( 2 ) 3 − 9 ( 2 ) 2 + 12 ( 2 ) + 4 = 16 − 36 + 24 + 4 = 8 ⟹ Δ s 2 = 8 − 9 = − 1
s ( 3 ) = 13 ⟹ Δ s 3 = 13 − 8 = + 5 s(3) = 13 \implies \Delta s_3 = 13 - 8 = +5 s ( 3 ) = 13 ⟹ Δ s 3 = 13 − 8 = + 5
Step 4 (Sum absolute sub-displacements): Total Distance = ∣ + 5 ∣ + ∣ − 1 ∣ + ∣ + 5 ∣ = 5 + 1 + 5 = 11 meters \text{Total Distance} = |+5| + |-1| + |+5| = 5 + 1 + 5 = 11 \text{ meters} Total Distance = ∣ + 5∣ + ∣ − 1∣ + ∣ + 5∣ = 5 + 1 + 5 = 11 meters
Part 4: Speeding Up vs. Slowing Down Analysis
Speeding Up: v ( t ) v(t) v ( t ) and a ( t ) a(t) a ( t ) have the SAME sign (both positive or both negative).
Slowing Down: v ( t ) v(t) v ( t ) and a ( t ) a(t) a ( t ) have OPPOSITE signs .
Velocity signs: v ( t ) = 6 ( t − 1 ) ( t − 2 ) v(t) = 6(t - 1)(t - 2) v ( t ) = 6 ( t − 1 ) ( t − 2 )
Positive ( v > 0 v > 0 v > 0 ) on [ 0 , 1 ) ∪ ( 2 , 3 ] [0, 1) \cup (2, 3] [ 0 , 1 ) ∪ ( 2 , 3 ] .
Negative ( v < 0 v < 0 v < 0 ) on ( 1 , 2 ) (1, 2) ( 1 , 2 ) .
Acceleration: a ( t ) = v ′ ( t ) = 12 t − 18 = 6 ( 2 t − 3 ) = 0 ⟹ t = 1.5 a(t) = v'(t) = 12t - 18 = 6(2t - 3) = 0 \implies t = 1.5 a ( t ) = v ′ ( t ) = 12 t − 18 = 6 ( 2 t − 3 ) = 0 ⟹ t = 1.5 .
Negative ( a < 0 a < 0 a < 0 ) on [ 0 , 1.5 ) [0, 1.5) [ 0 , 1.5 ) .
Positive ( a > 0 a > 0 a > 0 ) on ( 1.5 , 3 ] (1.5, 3] ( 1.5 , 3 ] .
Sign Comparison Table:
- On ( 0 , 1 ) (0, 1) ( 0 , 1 ) : v > 0 , a < 0 ⟹ v > 0, a < 0 \implies v > 0 , a < 0 ⟹ Slowing down
- On ( 1 , 1.5 ) (1, 1.5) ( 1 , 1.5 ) : v < 0 , a < 0 ⟹ v < 0, a < 0 \implies v < 0 , a < 0 ⟹ Speeding up
- On ( 1.5 , 2 ) (1.5, 2) ( 1.5 , 2 ) : v < 0 , a > 0 ⟹ v < 0, a > 0 \implies v < 0 , a > 0 ⟹ Slowing down
On ( 2 , 3 ) (2, 3) ( 2 , 3 ) : v > 0 , a > 0 ⟹ v > 0, a > 0 \implies v > 0 , a > 0 ⟹ Speeding up Speeding Up on ( 1 , 1.5 ) ∪ ( 2 , 3 ) Slowing Down on ( 0 , 1 ) ∪ ( 1.5 , 2 ) \text{Speeding Up on } (1, 1.5) \cup (2, 3) \qquad \text{Slowing Down on } (0, 1) \cup (1.5, 2) Speeding Up on ( 1 , 1.5 ) ∪ ( 2 , 3 ) Slowing Down on ( 0 , 1 ) ∪ ( 1.5 , 2 )
6. Graphing Calculator Protocol for CLEP Section 2
On Section 2 of the CLEP exam, you have access to the online scientific/graphing calculator (TI-84 Plus CE emulator). Use the numerical integration command fnInt :
Calculator Commands
Enter the Velocity Function: Press Y= and input Y 1 = v ( X ) Y_1 = v(X) Y 1 = v ( X ) .
Compute Displacement: Displacement = ∫ t 1 t 2 v ( t ) d t ⟹ MATH → 9:fnInt → fnInt ( Y 1 , X , t 1 , t 2 ) \text{Displacement} = \int_{t_1}^{t_2} v(t) \, dt \implies \text{MATH} \to \text{9:fnInt} \to \text{fnInt}(Y_1, X, t_1, t_2) Displacement = ∫ t 1 t 2 v ( t ) d t ⟹ MATH → 9:fnInt → fnInt ( Y 1 , X , t 1 , t 2 )
Compute Total Distance Traveled: Total Distance = ∫ t 1 t 2 ∣ v ( t ) ∣ d t ⟹ fnInt ( abs ( Y 1 ) , X , t 1 , t 2 ) \text{Total Distance} = \int_{t_1}^{t_2} |v(t)| \, dt \implies \text{fnInt}(\text{abs}(Y_1), X, t_1, t_2) Total Distance = ∫ t 1 t 2 ∣ v ( t ) ∣ d t ⟹ fnInt ( abs ( Y 1 ) , X , t 1 , t 2 ) (To access abs() , press MATH → \to → NUM → \to → 1:abs( ).
Compute Future Position s ( t 2 ) s(t_2) s ( t 2 ) : s ( t 2 ) = s ( t 1 ) + fnInt ( Y 1 , X , t 1 , t 2 ) s(t_2) = s(t_1) + \text{fnInt}(Y_1, X, t_1, t_2) s ( t 2 ) = s ( t 1 ) + fnInt ( Y 1 , X , t 1 , t 2 )
7. Common CLEP Pitfalls & Traps
Evaluating Displacement When Asked for Total Distance: Displacement ( ∫ v d t \int v \, dt ∫ v d t ) allows negative motion to cancel positive motion. Total distance ( ∫ ∣ v ∣ d t \int |v| \, dt ∫ ∣ v ∣ d t ) requires summing all path lengths as positive numbers. Always check which quantity the question requests.
Omitting Initial Conditions in Accumulation Problems: When asked for the particle's position s ( t ) s(t) s ( t ) or tank volume V ( t ) V(t) V ( t ) at a given time, adding the net change integral ∫ 0 t v ( u ) d u \int_0^t v(u) \, du ∫ 0 t v ( u ) d u to 0 0 0 instead of the initial value s ( 0 ) s(0) s ( 0 ) or V ( 0 ) V(0) V ( 0 ) is a standard distractor choice.
Equating "Speeding Up" with Positive Acceleration: A particle speeds up when its speed ∣ v ( t ) ∣ |v(t)| ∣ v ( t ) ∣ increases. If v ( t ) = − 10 v(t) = -10 v ( t ) = − 10 and a ( t ) = − 5 a(t) = -5 a ( t ) = − 5 , the particle is moving to the left faster and faster (speed is increasing from 10 to 15), even though acceleration is negative. Speeding up requires v ( t ) v(t) v ( t ) and a ( t ) a(t) a ( t ) to share the same sign .
Searching for Turning Points where a ( t ) = 0 a(t) = 0 a ( t ) = 0 : Turning points (reversals of motion) occur where velocity changes sign ( v ( t ) = 0 v(t) = 0 v ( t ) = 0 ), NOT where acceleration is zero.