Study guide
2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry
CLEP Chemistry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 CLEP Chemistry Exam Structure, Calculator & Periodic Table 1.2 Quantitative Foundations: Units, Dimensional Analysis & Significant Figures 1.3 Effective Study Strategies & Recommended Course Pathway
2 Chapter 2: Atomic Theory, Isotopes & Nuclear Chemistry
2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry 2.2 Quantum Numbers, Atomic Spectra & Electron Configurations 2.3 Nuclear Chemistry: Radiation, Decay Kinetics & Nuclear Reactions
3 Chapter 3: Periodic Relationships & Periodicity
3.1 Periodic Law & Periodic Table Organization 3.2 Periodic Trends: Atomic/Ionic Radii, Ionization Energy, Electron Affinity & Electronegativity 3.3 Oxidation States & Valence Electron Trends
4 Chapter 4: Chemical Bonding & Molecular Structure
4.1 Ionic, Covalent, Polar Covalent & Metallic Bonding 4.2 Lewis Structures, Formal Charges & Resonance 4.3 VSEPR Theory, Molecular Geometries & Polarity 4.4 Valence Bond Theory, Hybridization & Sigma/Pi Bonding
5 Chapter 5: Gases & Kinetic Molecular Theory
5.1 Gas Laws & the Ideal Gas Equation (PV = nRT) 5.2 Gas Mixtures: Dalton's Law of Partial Pressures & Graham's Law 5.3 Kinetic Molecular Theory & Maxwell-Boltzmann Distribution 5.4 Real Gases & Deviations from Ideal Behavior (van der Waals Equation)
6 Chapter 6: Condensed Phases & Phase Changes
6.1 Intermolecular Forces in Liquids & Solids 6.2 Phase Changes, Heating Curves & Vapor Pressure 6.3 Phase Diagrams & Critical Phenomena
7 Chapter 7: Solutions & Colligative Properties
7.1 Solution Formation, Solubility Factors & Henry's Law 7.2 Concentration Units: Molarity, Molality, Mole Fraction & Mass Percent 7.3 Colligative Properties & Raoult's Law 7.4 Electrolytes, Interionic Attractions & the van 't Hoff Factor
8 Chapter 8: Chemical Equations & Stoichiometry
8.1 Chemical Equations, Types of Reactions & Net Ionic Equations 8.2 The Mole Concept, Molar Mass & Empirical/Molecular Formulas 8.3 Reaction Stoichiometry, Limiting Reactants & Percent Yield
9 Chapter 9: Aqueous Reaction Types
9.1 Precipitation Reactions & Solubility Rules 9.2 Acid-Base Reactions & Neutralization 9.3 Coordination Compounds & Complex Ion Formation
10 Chapter 10: Oxidation-Reduction Reactions & Electrochemistry
10.1 Oxidation States & Balancing Redox Reactions by Half-Reaction Method 10.2 Voltaic (Galvanic) Cells & Standard Reduction Potentials 10.3 Cell Potential, Gibbs Free Energy & Equilibrium (Nernst Equation) 10.4 Electrolytic Cells & Faraday's Laws of Electrolysis
11 Chapter 11: Chemical Equilibrium & Dynamic Systems
11.1 Nature of Dynamic Equilibrium & Equilibrium Expressions (Kc, Kp) 11.2 Le Chatelier's Principle & Perturbations to Systems at Equilibrium 11.3 Equilibrium Calculations & the Reaction Quotient (Q vs K)
12 Chapter 12: Aqueous Equilibria: Acids, Bases & Solubility
12.1 Autoionization of Water, pH Scale & Strong vs Weak Acids/Bases 12.2 Acid-Base Equilibria (Ka, Kb), Polyprotic Acids & Salt Hydrolysis 12.3 Buffer Systems, Henderson-Hasselbalch Equation & Solubility Product (Ksp)
13 Chapter 13: Reaction Kinetics & Rate Laws
13.1 Reaction Rates, Rate Laws & Determination of Reaction Order 13.2 Integrated Rate Laws, Graphical Methods & Half-Lives 13.3 Collision Theory, Activation Energy & the Arrhenius Equation 13.4 Reaction Mechanisms, Elementary Steps & Catalysis
14 Chapter 14: Thermochemistry & Thermodynamics
14.1 Energy, Heat, Work & the First Law of Thermodynamics 14.2 Calorimetry, Specific Heat & Enthalpy (ΔH) 14.3 Hess's Law & Standard Enthalpies of Formation 14.4 Entropy (ΔS), Gibbs Free Energy (ΔG) & Spontaneity
15 Chapter 15: Descriptive Chemistry of the Elements
15.1 Horizontal, Vertical & Diagonal Periodic Relationships 15.2 Representative Main-Group Chemistry: Alkali, Alkaline Earth & Halogens 15.3 Transition Metals: Configurations, Colors & Common Reactivity 15.4 Main Groups 13–16 & Hydrogen: Characteristic Compounds and Reaction Products 15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds
16 Chapter 16: Fundamentals of Organic Chemistry
16.1 Hydrocarbons: Alkanes, Alkenes, Alkynes & Aromatic Systems 16.2 Major Functional Groups & IUPAC Nomenclature 16.3 Structural & Geometric Isomerism in Organic Compounds
17 Chapter 17: Laboratory Techniques & Analytical Methods
17.1 Essential Laboratory Apparatus & Measurement Uncertainty 17.2 Quantitative Analytical Methods: Titration & Gravimetric Analysis 17.3 Spectrophotometry, Beer's Law & Chromatography
18 Chapter 18: Laboratory Safety, Error Analysis & Scientific Deduction
18.1 Chemical Hazards, SDS/GHS Standards & Safety Protocols 18.2 Error Analysis: Systematic vs Random Errors & Percent Error 18.3 Data Interpretation, Graphical Analysis & Scientific Deduction
2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry
Key Takeaways Explain This Topic AI
Dalton's atomic theory established discrete atoms and mass conservation, but was revised following the discovery of subatomic particles and isotopes.
Thomson identified electrons via cathode ray deflection, Millikan quantified the fundamental unit of charge (-1.602 × 10⁻¹⁹ C), and Rutherford revealed the dense, positively charged nucleus through alpha-particle scattering.
Nuclides are uniquely designated by atomic number Z (protons) and mass number A (protons + neutrons); standard atomic weight is the abundance-weighted average of all natural isotopic masses.
Mass spectrometry separates ionized atoms and molecules according to their mass-to-charge (m/z) ratio, providing empirical isotopic mass data and characteristic molecular fragmentation peaks.
Before mass spectrometry, atomic masses came from chemical combining masses (equivalent masses) checked against the Dulong–Petit rule, which puts the molar heat capacity of many solid metals near 25 J/(mol·K).
Last updated: September 2026
2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry
Modern atomic theory evolved through experiments that dismantled the concept of indivisible atoms, establishing subatomic structure, quantized charge, and isotopic variations.
- Historical Progression of Atomic Models
- Dalton's Model and Limitations
In 1808, John Dalton formulated the first modern atomic theory:
Matter consists of indivisible atoms.
All atoms of a given element share identical mass and properties.
Compounds form when atoms combine in fixed whole-number ratios.
Chemical reactions rearrange atoms without creating or destroying them.
Subsequent discoveries modified Dalton's postulates: subatomic particles proved atoms are divisible; isotopes demonstrated that atoms of the same element differ in mass; and nuclear reactions can transmute elements.
Cathode Rays and the Electron
In 1897, J.J. Thomson investigated electrical discharges in evacuated cathode ray tubes. High voltage generated a ray traveling from the negative cathode to the positive anode. The ray was deflected toward positive electric plates and deflected by magnetic fields, confirming it consisted of negatively charged particles—electrons. Thomson measured their charge-to-mass ratio:
e/m_e = -1.759 × 10¹¹ C/kg
Because this ratio far exceeded that of hydrogen ions, Thomson concluded electrons are universal subatomic constituents, proposing the plum pudding model of electrons embedded in a positive sphere.
Millikan's Oil Drop Experiment
In 1909, Robert Millikan determined the electron's charge by suspending X-ray ionized oil droplets between charged plates. Balancing electrostatic force with gravity (qE = mg) showed each droplet's charge was an integer multiple of a fundamental unit:
e = -1.602 × 10⁻¹⁹ C
Combining e with Thomson's ratio yielded the electron's rest mass:
- m_e = (-1.602 × 10⁻¹⁹ C) / (-1.759 × 10¹¹ C/kg) = 9.109 × 10⁻³¹ kg (5.486 × 10⁻⁴ amu)
- Rutherford's Nuclear Atom
In 1911, Ernest Rutherford bombarded ~400 nm gold foil with alpha particles (⁴₂He²⁺). While >99.9% passed straight through, ~1 in 8,000 scattered at angles >90°, some bouncing backward. Rutherford concluded the atom is mostly empty space with all positive charge and nearly all mass concentrated in a tiny, dense central nucleus (~10⁻¹⁵ m vs. ~10⁻¹⁰ m for the atom).
Discovery of the Neutron
Because nuclear charge accounted for only half of atomic mass, James Chadwick in 1932 bombarded beryllium-9 with alpha particles:
⁹₄Be + ⁴₂He --> ¹²₆C + ¹₀n
The resulting neutral radiation ejected protons from paraffin wax, confirming the neutron (mass 1.00866 amu).
Subatomic Particles and Nuclide Notation
- Particle Symbol Location Absolute Charge (C) Relative Charge Mass (amu)
- Proton p⁺ or ¹₁p Nucleus +1.602 × 10⁻¹⁹ +1 1.00728
- Neutron n⁰ or ¹₀n Nucleus 0 0 1.00866
- Electron e⁻ or ⁰₋₁e Extranuclear -1.602 × 10⁻¹⁹ -1 0.00055
Atomic Number (Z): Number of protons; defines the element.
Mass Number (A): Total nucleons (protons + neutrons): A = Z + N.
Isotopes: Atoms of the same element (identical Z) with different neutron numbers (different A). They have essentially identical chemical reactivity but differ in mass and nuclear stability.
Nuclide Symbol: ᴬ_Z X^(±q), where X is the elemental symbol and q is net charge.
Quantitative Isotopic Abundances & Average Atomic Mass
Standard atomic weight is the abundance-weighted average of all natural stable isotopes:
A_avg = Σ (f_i × m_i) = (f₁ × m₁) + (f₂ × m₂) + ...
Worked Example 1: Chlorine
Chlorine consists of ³⁵Cl (34.969 amu, 75.78%) and ³⁷Cl (36.966 amu, 24.22%):
- A_avg = (0.7578 × 34.969) + (0.2422 × 36.966) = 26.499 + 8.953 = 35.45 amu
- Worked Example 2: Copper Abundances
Copper (63.546 amu) contains ⁶³Cu (62.930 amu) and ⁶⁵Cu (64.928 amu). Letting x equal the fraction of ⁶³Cu:
- 63.546 = 62.930x + 64.928(1 - x) = 64.928 - 1.998x
- 1.998x = 1.382 ==> x = 0.6917 (69.17% ⁶³Cu, 30.83% ⁶⁵Cu)
- Determining Atomic Masses: Chemical and Physical Means
The CLEP outline asks how atomic masses were determined "by chemical and physical means." The two routes answer different questions.
Chemical means (nineteenth-century methods)
Combining masses (equivalent mass): Weigh how much of an element combines with a fixed mass of a reference element. The equivalent mass is the mass of an element that combines with 8.00 g 8.00\text{ g} 8.00 g of oxygen. Atomic mass = equivalent mass × valence, so the valence (combining capacity) must be known or deduced.
Dulong–Petit rule: For many solid metallic elements, the molar heat capacity is roughly 25 J/(mol ⋅ K) 25\text{ J/(mol}\cdot\text{K)} 25 J/(mol ⋅ K) . Dividing 25 25 25 by the measured specific heat gives an approximate atomic mass, which fixes the valence needed to turn an exact equivalent mass into an exact atomic mass.
Gas densities and Avogadro's hypothesis (Cannizzaro's method): Equal volumes of gases contain equal numbers of molecules, so gas densities give molar masses of volatile compounds. The smallest mass of an element found in one mole of any of its compounds approximates that element's atomic mass.
Worked Example: Combining Masses + Dulong–Petit
A metal oxide is 79.89 % 79.89\% 79.89% metal by mass, and the metal's specific heat is 0.39 J/(g ⋅ ∘ C) 0.39\text{ J/(g}\cdot^\circ\text{C)} 0.39 J/(g ⋅ ∘ C) .
Approximate atomic mass (Dulong–Petit): 25 / 0.39 ≈ 64 g/mol 25 / 0.39 \approx 64\text{ g/mol} 25/0.39 ≈ 64 g/mol .
Equivalent mass: ( 79.89 / 20.11 ) × 8.00 = 31.78 g (79.89 / 20.11) \times 8.00 = 31.78\text{ g} ( 79.89/20.11 ) × 8.00 = 31.78 g of metal per 8.00 g 8.00\text{ g} 8.00 g of O.
Valence: 64 / 31.78 ≈ 2 64 / 31.78 \approx 2 64/31.78 ≈ 2 , so atomic mass = 2 × 31.78 = 63.56 g/mol = 2 \times 31.78 = 63.56\text{ g/mol} = 2 × 31.78 = 63.56 g/mol (copper, in CuO).
Physical means (modern method)
Mass spectrometry (below) measures the mass of each isotope and its relative abundance directly; the weighted average of those isotope masses is the standard atomic weight printed on the periodic table.
Mass Spectrometry
Mass spectrometry (MS) measures isotopic masses and abundances through five stages:
Vaporization: Sample is converted into low-pressure gas.
Ionization: Electron bombardment knocks out electrons, forming cations: M(g) + e⁻ --> M⁺(g) + 2e⁻.
Acceleration: Electric potential V accelerates ions to uniform kinetic energy: KE = qV = (1/2)mv².
Deflection: Magnetic field B exerts Lorentz force (qvB = mv²/r), yielding radius r = (1/B)√(2Vm/q). Lighter ions deflect more (smaller r).
Detection: Ion currents generate peak intensities proportional to relative abundances.
Halogen Mass Spectra Patterns
Chlorine (Cl₂): Monatomic peaks appear at m/z 35 and 37 (3:1 ratio). Diatomic Cl₂⁺ ions yield three peaks from binomial expansion (3/4 + 1/4)²: m/z 70 (³⁵Cl₂⁺), 72 (³⁵Cl³⁷Cl⁺), and 74 (³⁷Cl₂⁺) in a 9 : 6 : 1 ratio.
Bromine (Br₂): Monatomic ⁷⁹Br and ⁸¹Br appear in a 1:1 ratio. Diatomic Br₂⁺ ions yield peaks at m/z 158, 160, and 162 in a 1 : 2 : 1 ratio ((1/2 + 1/2)²).
- Diatomic Molecule Peak m/z Ion Composition Peak Ratio
- Cl₂ 70 ³⁵Cl³⁵Cl⁺ 9 (56.25%)
- Cl₂ 72 ³⁵Cl³⁷Cl⁺ 6 (37.50%)
- Cl₂ 74 ³⁷Cl³⁷Cl⁺ 1 (6.25%)
- Br₂ 158 ⁷⁹Br⁷⁹Br⁺ 1 (25.0%)
- Br₂ 160 ⁷⁹Br⁸¹Br⁺ 2 (50.0%)
- Br₂ 162 ⁸¹Br⁸¹Br⁺ 1 (25.0%)