Study guide

8.1 Chemical Equations, Types of Reactions & Net Ionic Equations

CLEP Chemistry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Strategy

1.1 CLEP Chemistry Exam Structure, Calculator & Periodic Table 1.2 Quantitative Foundations: Units, Dimensional Analysis & Significant Figures 1.3 Effective Study Strategies & Recommended Course Pathway

2 Chapter 2: Atomic Theory, Isotopes & Nuclear Chemistry

2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry 2.2 Quantum Numbers, Atomic Spectra & Electron Configurations 2.3 Nuclear Chemistry: Radiation, Decay Kinetics & Nuclear Reactions

3 Chapter 3: Periodic Relationships & Periodicity

3.1 Periodic Law & Periodic Table Organization 3.2 Periodic Trends: Atomic/Ionic Radii, Ionization Energy, Electron Affinity & Electronegativity 3.3 Oxidation States & Valence Electron Trends

4 Chapter 4: Chemical Bonding & Molecular Structure

4.1 Ionic, Covalent, Polar Covalent & Metallic Bonding 4.2 Lewis Structures, Formal Charges & Resonance 4.3 VSEPR Theory, Molecular Geometries & Polarity 4.4 Valence Bond Theory, Hybridization & Sigma/Pi Bonding

5 Chapter 5: Gases & Kinetic Molecular Theory

5.1 Gas Laws & the Ideal Gas Equation (PV = nRT) 5.2 Gas Mixtures: Dalton's Law of Partial Pressures & Graham's Law 5.3 Kinetic Molecular Theory & Maxwell-Boltzmann Distribution 5.4 Real Gases & Deviations from Ideal Behavior (van der Waals Equation)

6 Chapter 6: Condensed Phases & Phase Changes

6.1 Intermolecular Forces in Liquids & Solids 6.2 Phase Changes, Heating Curves & Vapor Pressure 6.3 Phase Diagrams & Critical Phenomena

7 Chapter 7: Solutions & Colligative Properties

7.1 Solution Formation, Solubility Factors & Henry's Law 7.2 Concentration Units: Molarity, Molality, Mole Fraction & Mass Percent 7.3 Colligative Properties & Raoult's Law 7.4 Electrolytes, Interionic Attractions & the van 't Hoff Factor

8 Chapter 8: Chemical Equations & Stoichiometry

8.1 Chemical Equations, Types of Reactions & Net Ionic Equations 8.2 The Mole Concept, Molar Mass & Empirical/Molecular Formulas 8.3 Reaction Stoichiometry, Limiting Reactants & Percent Yield

9 Chapter 9: Aqueous Reaction Types

9.1 Precipitation Reactions & Solubility Rules 9.2 Acid-Base Reactions & Neutralization 9.3 Coordination Compounds & Complex Ion Formation

10 Chapter 10: Oxidation-Reduction Reactions & Electrochemistry

10.1 Oxidation States & Balancing Redox Reactions by Half-Reaction Method 10.2 Voltaic (Galvanic) Cells & Standard Reduction Potentials 10.3 Cell Potential, Gibbs Free Energy & Equilibrium (Nernst Equation) 10.4 Electrolytic Cells & Faraday's Laws of Electrolysis

11 Chapter 11: Chemical Equilibrium & Dynamic Systems

11.1 Nature of Dynamic Equilibrium & Equilibrium Expressions (Kc, Kp) 11.2 Le Chatelier's Principle & Perturbations to Systems at Equilibrium 11.3 Equilibrium Calculations & the Reaction Quotient (Q vs K)

12 Chapter 12: Aqueous Equilibria: Acids, Bases & Solubility

12.1 Autoionization of Water, pH Scale & Strong vs Weak Acids/Bases 12.2 Acid-Base Equilibria (Ka, Kb), Polyprotic Acids & Salt Hydrolysis 12.3 Buffer Systems, Henderson-Hasselbalch Equation & Solubility Product (Ksp)

13 Chapter 13: Reaction Kinetics & Rate Laws

13.1 Reaction Rates, Rate Laws & Determination of Reaction Order 13.2 Integrated Rate Laws, Graphical Methods & Half-Lives 13.3 Collision Theory, Activation Energy & the Arrhenius Equation 13.4 Reaction Mechanisms, Elementary Steps & Catalysis

14 Chapter 14: Thermochemistry & Thermodynamics

14.1 Energy, Heat, Work & the First Law of Thermodynamics 14.2 Calorimetry, Specific Heat & Enthalpy (ΔH) 14.3 Hess's Law & Standard Enthalpies of Formation 14.4 Entropy (ΔS), Gibbs Free Energy (ΔG) & Spontaneity

15 Chapter 15: Descriptive Chemistry of the Elements

15.1 Horizontal, Vertical & Diagonal Periodic Relationships 15.2 Representative Main-Group Chemistry: Alkali, Alkaline Earth & Halogens 15.3 Transition Metals: Configurations, Colors & Common Reactivity 15.4 Main Groups 13–16 & Hydrogen: Characteristic Compounds and Reaction Products 15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds

16 Chapter 16: Fundamentals of Organic Chemistry

16.1 Hydrocarbons: Alkanes, Alkenes, Alkynes & Aromatic Systems 16.2 Major Functional Groups & IUPAC Nomenclature 16.3 Structural & Geometric Isomerism in Organic Compounds

17 Chapter 17: Laboratory Techniques & Analytical Methods

17.1 Essential Laboratory Apparatus & Measurement Uncertainty 17.2 Quantitative Analytical Methods: Titration & Gravimetric Analysis 17.3 Spectrophotometry, Beer's Law & Chromatography

18 Chapter 18: Laboratory Safety, Error Analysis & Scientific Deduction

18.1 Chemical Hazards, SDS/GHS Standards & Safety Protocols 18.2 Error Analysis: Systematic vs Random Errors & Percent Error 18.3 Data Interpretation, Graphical Analysis & Scientific Deduction

8.1 Chemical Equations, Types of Reactions & Net Ionic Equations

Key Takeaways Explain This Topic AI

A balanced chemical equation reflects the Law of Conservation of Mass; stoichiometric coefficients adjust particle proportions without altering invariant chemical identities established by subscripts.

Inorganic reactions encompass combination, decomposition, single displacement (governed by metal and halogen activity series), double displacement (precipitation, neutralization, gas-evolution), and hydrocarbon combustion.

Aqueous ionic reactions are formally represented as molecular equations, complete ionic equations (dissociating soluble strong electrolytes), and net ionic equations (eliminating non-participating spectator ions).

Gas-evolution double-displacement reactions frequently proceed through unstable intermediates—including carbonic acid (H2CO3 -> H2O + CO2), sulfurous acid (H2SO3 -> H2O + SO2), and ammonium hydroxide (NH4OH -> NH3 + H2O)—that spontaneously decompose into gas and water.

Last updated: September 2026

8.1 Chemical Equations, Types of Reactions & Net Ionic Equations

Quick Summary: Chemical equations symbolize chemical transformations, conserving atoms and electrical charge according to the Law of Conservation of Mass. Inorganic reactions are classified into combination, decomposition, single displacement (governed by the activity series), double displacement (driven by precipitate, water, or gas formation), and combustion. In aqueous solutions, reactions between electrolytes are represented by net ionic equations, which eliminate spectator ions to isolate the fundamental chemical transformation.

1. Anatomy of Chemical Equations & Conservation of Mass

A chemical equation symbolizes the rearrangement of atoms during a chemical change. Reactants appear on the left of the reaction arrow, and products appear on the right. Physical state designations denote phase under ambient reaction conditions: solid ( s ) (s) ( s ) , liquid ( l ) (l) ( l ) , gas ( g ) (g) ( g ) , and aqueous solution ( a q ) (aq) ( a q ) . Reaction conditions, such as thermal input ( Δ \Delta Δ ) or specific catalysts, appear above or below the arrow.

Coefficients versus Subscripts

Subscripts define the fixed, invariant stoichiometric ratio of atoms within a molecule or crystal lattice (e.g., in H 2 O \text{H}_2\text{O} H 2 ​ O , the subscript 2 2 2 indicates two hydrogen atoms bonded to one oxygen). Altering subscripts changes the fundamental chemical substance.

Stoichiometric Coefficients are whole numbers placed before formulas to balance the total quantity of each atom between reactants and products.

The Law of Conservation of Mass

Established by Antoine Lavoisier in 1789, the Law of Conservation of Mass mandates that matter is neither created nor destroyed during chemical transformations. Every atom entering a reaction must exit in the product mixture. Consequently, balanced equations satisfy two criteria:

Mass Balance: The total number of atoms of each element is identical on both sides.

Charge Balance: The net electrical charge of reactants equals the net charge of products.

Balancing Equations by Inspection

Most non-redox equations on the exam can be balanced by inspection:

Write correct formulas for every reactant and product; never change a subscript.

Balance the element that appears in the fewest formulas first, usually a metal or carbon.

Balance polyatomic ions that survive unchanged as single units (for example, keep SO 4 2 − \text{SO}_4^{2-} SO 4 2 − ​ together).

Balance hydrogen and then oxygen last, because they usually appear in several formulas.

If a fractional coefficient appears, multiply every coefficient by the denominator, then confirm that the coefficients are the smallest whole numbers.

Worked Example 1: Fe ( s ) + O 2 ( g ) → Fe 2 O 3 ( s ) \text{Fe}(s) + \text{O}_2(g) \to \text{Fe}_2\text{O}_3(s) Fe ( s ) + O 2 ​ ( g ) → Fe 2 ​ O 3 ​ ( s ) . Two Fe are needed on the left for each Fe 2 O 3 \text{Fe}_2\text{O}_3 Fe 2 ​ O 3 ​ , and oxygen requires 3 2 O 2 \tfrac{3}{2}\,\text{O}_2 2 3 ​ O 2 ​ : 2 Fe + 3 2 O 2 → Fe 2 O 3 2\,\text{Fe} + \tfrac{3}{2}\,\text{O}_2 \to \text{Fe}_2\text{O}_3 2 Fe + 2 3 ​ O 2 ​ → Fe 2 ​ O 3 ​ . Doubling clears the fraction: 4 Fe + 3 O 2 → 2 Fe 2 O 3 4\,\text{Fe} + 3\,\text{O}_2 \to 2\,\text{Fe}_2\text{O}_3 4 Fe + 3 O 2 ​ → 2 Fe 2 ​ O 3 ​ .

Worked Example 2 (combustion): C 2 H 6 + O 2 → CO 2 + H 2 O \text{C}_2\text{H}_6 + \text{O}_2 \to \text{CO}_2 + \text{H}_2\text{O} C 2 ​ H 6 ​ + O 2 ​ → CO 2 ​ + H 2 ​ O . Carbon gives 2 CO 2 2\,\text{CO}_2 2 CO 2 ​ ; hydrogen gives 3 H 2 O 3\,\text{H}_2\text{O} 3 H 2 ​ O ; the products now hold 4 + 3 = 7 4 + 3 = 7 4 + 3 = 7 O atoms, so 7 2 O 2 \tfrac{7}{2}\,\text{O}_2 2 7 ​ O 2 ​ is needed. Doubling gives 2 C 2 H 6 + 7 O 2 → 4 CO 2 + 6 H 2 O 2\,\text{C}_2\text{H}_6 + 7\,\text{O}_2 \to 4\,\text{CO}_2 + 6\,\text{H}_2\text{O} 2 C 2 ​ H 6 ​ + 7 O 2 ​ → 4 CO 2 ​ + 6 H 2 ​ O (check: 4 C, 12 H, and 14 O on each side).

Redox equations whose electrons do not balance by inspection are handled with the half-reaction method in Section 10.1.

2. Five Major Reaction Classifications

Reaction Type General Schematic Driving Force / Key Feature Representative Example

Combination A + B → A B A + B \to AB A + B → A B Formation of more stable bonds 2 Mg ( s ) + O 2 ( g ) → 2 MgO ( s ) 2\,\text{Mg}(s) + \text{O}_2(g) \to 2\,\text{MgO}(s) 2 Mg ( s ) + O 2 ​ ( g ) → 2 MgO ( s )

Decomposition A B → A + B AB \to A + B A B → A + B Thermal, electrical, or catalytic energy input CaCO 3 ( s ) → Δ CaO ( s ) + CO 2 ( g ) \text{CaCO}_3(s) \xrightarrow{\Delta} \text{CaO}(s) + \text{CO}_2(g) CaCO 3 ​ ( s ) Δ ​ CaO ( s ) + CO 2 ​ ( g )

Single Displacement A + B C → A C + B A + BC \to AC + B A + BC → A C + B Thermodynamic oxidation potential difference Zn ( s ) + 2 HCl ( a q ) → ZnCl 2 ( a q ) + H 2 ( g ) \text{Zn}(s) + 2\,\text{HCl}(aq) \to \text{ZnCl}_2(aq) + \text{H}_2(g) Zn ( s ) + 2 HCl ( a q ) → ZnCl 2 ​ ( a q ) + H 2 ​ ( g )

Double Displacement A B + C D → A D + C B AB + CD \to AD + CB A B + C D → A D + CB Removal of ions via precipitate, weak electrolyte, or gas AgNO 3 ( a q ) + NaCl ( a q ) → AgCl ( s ) + NaNO 3 ( a q ) \text{AgNO}_3(aq) + \text{NaCl}(aq) \to \text{AgCl}(s) + \text{NaNO}_3(aq) AgNO 3 ​ ( a q ) + NaCl ( a q ) → AgCl ( s ) + NaNO 3 ​ ( a q )

Combustion Fuel + O 2 → CO 2 + H 2 O + \text{O}_2 \to \text{CO}_2 + \text{H}_2\text{O} + O 2 ​ → CO 2 ​ + H 2 ​ O Highly exothermic oxidation releasing heat/light C 3 H 8 ( g ) + 5 O 2 ( g ) → 3 CO 2 ( g ) + 4 H 2 O ( g ) \text{C}_3\text{H}_8(g) + 5\,\text{O}_2(g) \to 3\,\text{CO}_2(g) + 4\,\text{H}_2\text{O}(g) C 3 ​ H 8 ​ ( g ) + 5 O 2 ​ ( g ) → 3 CO 2 ​ ( g ) + 4 H 2 ​ O ( g )

Single Displacement & The Activity Series

In a single displacement reaction, an elemental metal or halogen displaces a less active counterpart from an aqueous compound. The Activity Series ranks elements by their relative tendency to undergo oxidation (lose electrons): Li > K > Ba > Ca > Na > Mg > Al > Mn > Zn > Cr > Fe > Ni > Sn > Pb > H 2 > Cu > Ag > Pt > Au \text{Li} > \text{K} > \text{Ba} > \text{Ca} > \text{Na} > \text{Mg} > \text{Al} > \text{Mn} > \text{Zn} > \text{Cr} > \text{Fe} > \text{Ni} > \text{Sn} > \text{Pb} > \mathbf{H_2} > \text{Cu} > \text{Ag} > \text{Pt} > \text{Au} Li > K > Ba > Ca > Na > Mg > Al > Mn > Zn > Cr > Fe > Ni > Sn > Pb > H 2 ​ > Cu > Ag > Pt > Au

Active metals ( Li \text{Li} Li – Na \text{Na} Na ) reduce cold water to yield H 2 ( g ) \text{H}_2(g) H 2 ​ ( g ) and aqueous metal hydroxides.

Moderately active metals ( Mg \text{Mg} Mg – Pb \text{Pb} Pb ) reduce aqueous hydronium in dilute acids ( HCl , H 2 SO 4 \text{HCl}, \text{H}_2\text{SO}_4 HCl , H 2 ​ SO 4 ​ ) to liberate H 2 ( g ) \text{H}_2(g) H 2 ​ ( g ) , but do not react with cold water.

Metals below hydrogen ( Cu , Ag , Pt , Au \text{Cu}, \text{Ag}, \text{Pt}, \text{Au} Cu , Ag , Pt , Au ) lie below hydrogen and cannot displace H 2 ( g ) \text{H}_2(g) H 2 ​ ( g ) from non-oxidizing acids.

Halogen activity parallels electronegativity and reduction potentials: F 2 > Cl 2 > Br 2 > I 2 \text{F}_2 > \text{Cl}_2 > \text{Br}_2 > \text{I}_2 F 2 ​ > Cl 2 ​ > Br 2 ​ > I 2 ​ . Chlorine displaces bromide and iodide ions from solution, but cannot displace fluoride.

3. Aqueous Solutions: Molecular, Complete & Net Ionic Equations

When soluble ionic compounds dissolve in water, solvent dipoles dissociate them into independent hydrated ions. Aqueous reactions are formulated through three distinct representations:

Molecular Equation: Written with all reactants and products depicted as intact neutral compounds: Pb(NO 3 ) 2 ( a q ) + 2 KI ( a q ) ⟶ PbI 2 ( s ) + 2 KNO 3 ( a q ) \text{Pb(NO}_3)_2(aq) + 2\,\text{KI}(aq) \longrightarrow \text{PbI}_2(s) + 2\,\text{KNO}_3(aq) Pb(NO 3 ​ ) 2 ​ ( a q ) + 2 KI ( a q ) ⟶ PbI 2 ​ ( s ) + 2 KNO 3 ​ ( a q )

Complete (Total) Ionic Equation: Dissociates all dissolved strong electrolytes into separated aqueous ions. Weak electrolytes, precipitates, pure liquids, and gases remain undissociated: Pb 2 + ( a q ) + 2 NO 3 − ( a q ) + 2 K + ( a q ) + 2 I − ( a q ) ⟶ PbI 2 ( s ) + 2 K + ( a q ) + 2 NO 3 − ( a q ) \text{Pb}^{2+}(aq) + 2\,\text{NO}_3^-(aq) + 2\,\text{K}^+(aq) + 2\,\text{I}^-(aq) \longrightarrow \text{PbI}_2(s) + 2\,\text{K}^+(aq) + 2\,\text{NO}_3^-(aq) Pb 2 + ( a q ) + 2 NO 3 − ​ ( a q ) + 2 K + ( a q ) + 2 I − ( a q ) ⟶ PbI 2 ​ ( s ) + 2 K + ( a q ) + 2 NO 3 − ​ ( a q )

Net Ionic Equation: Eliminates spectator ions —species that appear identically on both sides without chemical alteration—revealing the fundamental chemical process: Pb 2 + ( a q ) + 2 I − ( a q ) ⟶ PbI 2 ( s ) \text{Pb}^{2+}(aq) + 2\,\text{I}^-(aq) \longrightarrow \text{PbI}_2(s) Pb 2 + ( a q ) + 2 I − ( a q ) ⟶ PbI 2 ​ ( s )

Systematic Protocol for Net Ionic Equations

Identify Strong Electrolytes: Fully dissociate soluble salts, the six strong acids ( HCl , HBr , HI , HNO 3 , HClO 4 , H 2 SO 4 \text{HCl}, \text{HBr}, \text{HI}, \text{HNO}_3, \text{HClO}_4, \text{H}_2\text{SO}_4 HCl , HBr , HI , HNO 3 ​ , HClO 4 ​ , H 2 ​ SO 4 ​ ), and strong bases (Group 1 hydroxides, Ca(OH) 2 , Sr(OH) 2 , Ba(OH) 2 \text{Ca(OH)}_2, \text{Sr(OH)}_2, \text{Ba(OH)}_2 Ca(OH) 2 ​ , Sr(OH) 2 ​ , Ba(OH) 2 ​ ).

Retain Intact Formulas: Keep weak acids (e.g., HF , CH 3 COOH \text{HF}, \text{CH}_3\text{COOH} HF , CH 3 ​ COOH ), weak bases ( NH 3 \text{NH}_3 NH 3 ​ ), insoluble solids ( ( s ) (s) ( s ) ), pure liquids ( ( l ) (l) ( l ) , notably H 2 O \text{H}_2\text{O} H 2 ​ O ), and gases ( ( g ) (g) ( g ) ) in molecular form.

Cancel Spectator Ions: Eliminate identical ions in equal numbers from both sides.

4. Gas-Evolution Reactions via Unstable Intermediates

Certain double displacement reactions produce intermediate acids or bases that are thermodynamically unstable in water, decomposing spontaneously into volatile gases and liquid water:

Carbonates and Bicarbonates: React with acid to produce carbonic acid ( H 2 CO 3 \text{H}_2\text{CO}_3 H 2 ​ CO 3 ​ ), which spontaneously decomposes: NaHCO 3 ( s ) + H + ( a q ) ⟶ Na + ( a q ) + H 2 O ( l ) + CO 2 ( g ) \text{NaHCO}_3(s) + \text{H}^+(aq) \longrightarrow \text{Na}^+(aq) + \text{H}_2\text{O}(l) + \text{CO}_2(g) NaHCO 3 ​ ( s ) + H + ( a q ) ⟶ Na + ( a q ) + H 2 ​ O ( l ) + CO 2 ​ ( g )

Sulfites and Bisulfites: React with acid to yield sulfurous acid ( H 2 SO 3 \text{H}_2\text{SO}_3 H 2 ​ SO 3 ​ ), decomposing into sulfur dioxide gas: SO 3 2 − ( a q ) + 2 H + ( a q ) ⟶ H 2 O ( l ) + SO 2 ( g ) \text{SO}_3^{2-}(aq) + 2\,\text{H}^+(aq) \longrightarrow \text{H}_2\text{O}(l) + \text{SO}_2(g) SO 3 2 − ​ ( a q ) + 2 H + ( a q ) ⟶ H 2 ​ O ( l ) + SO 2 ​ ( g )

Ammonium Salts: React with strong bases to form ammonium hydroxide, which decomposes into ammonia gas: NH 4 + ( a q ) + OH − ( a q ) ⟶ NH 3 ( g ) + H 2 O ( l ) \text{NH}_4^+(aq) + \text{OH}^-(aq) \longrightarrow \text{NH}_3(g) + \text{H}_2\text{O}(l) NH 4 + ​ ( a q ) + OH − ( a q ) ⟶ NH 3 ​ ( g ) + H 2 ​ O ( l )

Metal Sulfides: React directly with acids to generate toxic hydrogen sulfide gas without forming an intermediate: FeS ( s ) + 2 H + ( a q ) ⟶ Fe 2 + ( a q ) + H 2 S ( g ) \text{FeS}(s) + 2\,\text{H}^+(aq) \longrightarrow \text{Fe}^{2+}(aq) + \text{H}_2\text{S}(g) FeS ( s ) + 2 H + ( a q ) ⟶ Fe 2 + ( a q ) + H 2 ​ S ( g )