Study guide
6.3 Phase Diagrams & Critical Phenomena
CLEP Chemistry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 CLEP Chemistry Exam Structure, Calculator & Periodic Table 1.2 Quantitative Foundations: Units, Dimensional Analysis & Significant Figures 1.3 Effective Study Strategies & Recommended Course Pathway
2 Chapter 2: Atomic Theory, Isotopes & Nuclear Chemistry
2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry 2.2 Quantum Numbers, Atomic Spectra & Electron Configurations 2.3 Nuclear Chemistry: Radiation, Decay Kinetics & Nuclear Reactions
3 Chapter 3: Periodic Relationships & Periodicity
3.1 Periodic Law & Periodic Table Organization 3.2 Periodic Trends: Atomic/Ionic Radii, Ionization Energy, Electron Affinity & Electronegativity 3.3 Oxidation States & Valence Electron Trends
4 Chapter 4: Chemical Bonding & Molecular Structure
4.1 Ionic, Covalent, Polar Covalent & Metallic Bonding 4.2 Lewis Structures, Formal Charges & Resonance 4.3 VSEPR Theory, Molecular Geometries & Polarity 4.4 Valence Bond Theory, Hybridization & Sigma/Pi Bonding
5 Chapter 5: Gases & Kinetic Molecular Theory
5.1 Gas Laws & the Ideal Gas Equation (PV = nRT) 5.2 Gas Mixtures: Dalton's Law of Partial Pressures & Graham's Law 5.3 Kinetic Molecular Theory & Maxwell-Boltzmann Distribution 5.4 Real Gases & Deviations from Ideal Behavior (van der Waals Equation)
6 Chapter 6: Condensed Phases & Phase Changes
6.1 Intermolecular Forces in Liquids & Solids 6.2 Phase Changes, Heating Curves & Vapor Pressure 6.3 Phase Diagrams & Critical Phenomena
7 Chapter 7: Solutions & Colligative Properties
7.1 Solution Formation, Solubility Factors & Henry's Law 7.2 Concentration Units: Molarity, Molality, Mole Fraction & Mass Percent 7.3 Colligative Properties & Raoult's Law 7.4 Electrolytes, Interionic Attractions & the van 't Hoff Factor
8 Chapter 8: Chemical Equations & Stoichiometry
8.1 Chemical Equations, Types of Reactions & Net Ionic Equations 8.2 The Mole Concept, Molar Mass & Empirical/Molecular Formulas 8.3 Reaction Stoichiometry, Limiting Reactants & Percent Yield
9 Chapter 9: Aqueous Reaction Types
9.1 Precipitation Reactions & Solubility Rules 9.2 Acid-Base Reactions & Neutralization 9.3 Coordination Compounds & Complex Ion Formation
10 Chapter 10: Oxidation-Reduction Reactions & Electrochemistry
10.1 Oxidation States & Balancing Redox Reactions by Half-Reaction Method 10.2 Voltaic (Galvanic) Cells & Standard Reduction Potentials 10.3 Cell Potential, Gibbs Free Energy & Equilibrium (Nernst Equation) 10.4 Electrolytic Cells & Faraday's Laws of Electrolysis
11 Chapter 11: Chemical Equilibrium & Dynamic Systems
11.1 Nature of Dynamic Equilibrium & Equilibrium Expressions (Kc, Kp) 11.2 Le Chatelier's Principle & Perturbations to Systems at Equilibrium 11.3 Equilibrium Calculations & the Reaction Quotient (Q vs K)
12 Chapter 12: Aqueous Equilibria: Acids, Bases & Solubility
12.1 Autoionization of Water, pH Scale & Strong vs Weak Acids/Bases 12.2 Acid-Base Equilibria (Ka, Kb), Polyprotic Acids & Salt Hydrolysis 12.3 Buffer Systems, Henderson-Hasselbalch Equation & Solubility Product (Ksp)
13 Chapter 13: Reaction Kinetics & Rate Laws
13.1 Reaction Rates, Rate Laws & Determination of Reaction Order 13.2 Integrated Rate Laws, Graphical Methods & Half-Lives 13.3 Collision Theory, Activation Energy & the Arrhenius Equation 13.4 Reaction Mechanisms, Elementary Steps & Catalysis
14 Chapter 14: Thermochemistry & Thermodynamics
14.1 Energy, Heat, Work & the First Law of Thermodynamics 14.2 Calorimetry, Specific Heat & Enthalpy (ΔH) 14.3 Hess's Law & Standard Enthalpies of Formation 14.4 Entropy (ΔS), Gibbs Free Energy (ΔG) & Spontaneity
15 Chapter 15: Descriptive Chemistry of the Elements
15.1 Horizontal, Vertical & Diagonal Periodic Relationships 15.2 Representative Main-Group Chemistry: Alkali, Alkaline Earth & Halogens 15.3 Transition Metals: Configurations, Colors & Common Reactivity 15.4 Main Groups 13–16 & Hydrogen: Characteristic Compounds and Reaction Products 15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds
16 Chapter 16: Fundamentals of Organic Chemistry
16.1 Hydrocarbons: Alkanes, Alkenes, Alkynes & Aromatic Systems 16.2 Major Functional Groups & IUPAC Nomenclature 16.3 Structural & Geometric Isomerism in Organic Compounds
17 Chapter 17: Laboratory Techniques & Analytical Methods
17.1 Essential Laboratory Apparatus & Measurement Uncertainty 17.2 Quantitative Analytical Methods: Titration & Gravimetric Analysis 17.3 Spectrophotometry, Beer's Law & Chromatography
18 Chapter 18: Laboratory Safety, Error Analysis & Scientific Deduction
18.1 Chemical Hazards, SDS/GHS Standards & Safety Protocols 18.2 Error Analysis: Systematic vs Random Errors & Percent Error 18.3 Data Interpretation, Graphical Analysis & Scientific Deduction
6.3 Phase Diagrams & Critical Phenomena
Key Takeaways Explain This Topic AI
A pressure-temperature (P-T) phase diagram maps thermodynamically stable states of matter across solid, liquid, and gas regions bounded by sublimation, fusion, and vaporization equilibrium curves.
The triple point represents the invariant condition where solid, liquid, and gas phases coexist simultaneously in dynamic equilibrium with zero degrees of freedom (F = 0).
The vaporization curve terminates at the critical point (T_c, P_c); beyond this point, liquid and gas phases merge into a single, homogeneous supercritical fluid.
Supercritical fluids exhibit hybrid properties: liquid-like densities that confer powerful solvent dissolution capabilities, coupled with gas-like viscosities, high diffusivities, and zero surface tension.
Typical substances (CO2) display a positive solid-liquid slope (dP/dT > 0) because the solid is denser than the liquid; water displays an anomalous negative slope (dP/dT < 0) because hydrogen-bonded ice expansion makes solid ice less dense than liquid water.
Last updated: September 2026
6.3 Phase Diagrams & Critical Phenomena
Quick Summary: A pressure-temperature ( P − T P-T P − T ) phase diagram maps the thermodynamically stable phases of a pure substance. Regions (solid, liquid, gas) are delineated by coexistence curves representing two-phase equilibria. These curves meet at the invariant triple point , where three phases coexist. The vaporization curve ends at the critical point , beyond which liquid and gas merge into a supercritical fluid . While typical substances display a positive solid-liquid slope ( d P / d T > 0 dP/dT > 0 d P / d T > 0 ), water displays an anomalous negative slope ( d P / d T < 0 dP/dT < 0 d P / d T < 0 ) due to the open hexagonal hydrogen-bonded structure of ice.
1. Topography of a Pressure-Temperature ( P − T P-T P − T ) Phase Diagram
A unary phase diagram displays the favored state of a pure substance across pressure ( P P P ) and temperature ( T T T ):
Solid Region: Favored at low T T T and high P P P where IMFs dominate over thermal motion.
Liquid Region: Occupies intermediate temperatures and moderate-to-high pressures.
Gas Region: Favored at high T T T and low P P P where kinetic energy disperses molecules.
Coexistence Boundary Curves
Lines separating regions represent conditions where two phases coexist in dynamic equilibrium:
Sublimation Curve: Solid ⇌ \rightleftharpoons ⇌ Gas equilibrium. Originates near absolute zero and terminates at the triple point.
Fusion Curve: Solid ⇌ \rightleftharpoons ⇌ Liquid equilibrium. Extends upward from the triple point.
Vaporization Curve: Liquid ⇌ \rightleftharpoons ⇌ Gas equilibrium (the liquid vapor pressure curve). Extends from the triple point to the critical point.
Gibbs Phase Rule
Equilibrium constraints are governed by the Gibbs Phase Rule : F = C − P p h a s e s + 2 F = C - P_{phases} + 2 F = C − P p ha ses + 2
For a pure substance ( C = 1 C = 1 C = 1 ):
Single-Phase Area ( P p h a s e s = 1 P_{phases} = 1 P p ha ses = 1 ): F = 1 − 1 + 2 = 2 F = 1 - 1 + 2 = 2 F = 1 − 1 + 2 = 2 ( bivariant ). Both T T T and P P P can vary independently.
Coexistence Curve ( P p h a s e s = 2 P_{phases} = 2 P p ha ses = 2 ): F = 1 − 2 + 2 = 1 F = 1 - 2 + 2 = 1 F = 1 − 2 + 2 = 1 ( univariant ). Choosing T T T automatically fixes P P P .
Triple Point ( P p h a s e s = 3 P_{phases} = 3 P p ha ses = 3 ): F = 1 − 3 + 2 = 0 F = 1 - 3 + 2 = 0 F = 1 − 3 + 2 = 0 ( invariant ). Three phases coexist at a single fixed condition.
- 2. Singular Thermodynamic Points: Triple Point and Critical Point
- The Invariant Triple Point
The triple point ( T t p , P t p T_{tp}, P_{tp} T tp , P tp ) is the intersection where sublimation, fusion, and vaporization curves meet. At this invariant point, solid, liquid, and vapor coexist in simultaneous equilibrium:
Water: T t p = 0.01 ∘ C T_{tp} = 0.01^\circ\text{C} T tp = 0.0 1 ∘ C ( 273.16 K 273.16\text{ K} 273.16 K ) and P t p = 0.00603 atm P_{tp} = 0.00603\text{ atm} P tp = 0.00603 atm ( 4.58 torr = 611.65 Pa 4.58\text{ torr} = 611.65\text{ Pa} 4.58 torr = 611.65 Pa ).
Carbon Dioxide: T t p = − 56.6 ∘ C T_{tp} = -56.6^\circ\text{C} T tp = − 56. 6 ∘ C ( 216.6 K 216.6\text{ K} 216.6 K ) and P t p = 5.11 atm P_{tp} = 5.11\text{ atm} P tp = 5.11 atm ( 518 kPa 518\text{ kPa} 518 kPa ).
The Critical Point
The vaporization curve terminates at the critical point ( T c , P c T_c, P_c T c , P c ):
Critical Temperature ( T c T_c T c ): Maximum temperature at which a liquid can exist, regardless of applied pressure. Beyond T c T_c T c , kinetic energy exceeds all intermolecular attractions.
Critical Pressure ( P c P_c P c ): Minimum pressure required to liquefy a gas at its critical temperature.
As liquid and vapor approach ( T c , P c ) (T_c, P_c) ( T c , P c ) in a sealed cell, thermal expansion decreases liquid density while compression increases vapor density. At the critical point, both densities equalize, surface tension drops to zero, the meniscus vanishes, and the phases merge into a single fluid.
3. Supercritical Fluids: Nature, Properties & Industrial Applications
A substance beyond its critical point ( T > T c T > T_c T > T c and P > P c P > P_c P > P c ) is a supercritical fluid (SCF) , exhibiting hybrid properties:
Density: Liquid-like ( 0.2 − 0.9 g/cm 3 0.2 - 0.9\text{ g/cm}^3 0.2 − 0.9 g/cm 3 ), providing high solvent power for nonvolatile solutes.
Viscosity & Diffusivity: Gas-like viscosity ( 10 − 4 − 10 − 5 Pa ⋅ s 10^{-4} - 10^{-5}\text{ Pa}\cdot\text{s} 1 0 − 4 − 1 0 − 5 Pa ⋅ s ) and high diffusivity ( 10 − 4 cm 2 / s 10^{-4}\text{ cm}^2/\text{s} 1 0 − 4 cm 2 / s ), enabling rapid mass transfer.
Zero Surface Tension: Eliminates phase interfaces, permitting rapid penetration through microporous matrices.
Technological Applications
Supercritical CO₂ ( scCO 2 \text{scCO}_2 scCO 2 ): Accessible critical coordinates ( T c = 31.0 ∘ C T_c = 31.0^\circ\text{C} T c = 31. 0 ∘ C , P c = 72.8 atm P_c = 72.8\text{ atm} P c = 72.8 atm ). Non-toxic, non-flammable, and leaves zero hazardous residues upon depressurization. Used to decaffeinate green coffee beans, extract botanical oils, and perform green dry cleaning.
Supercritical Water ( scH 2 O \text{scH}_2\text{O} scH 2 O ): Critical coordinates ( T c = 374 ∘ C T_c = 374^\circ\text{C} T c = 37 4 ∘ C , P c = 218 atm P_c = 218\text{ atm} P c = 218 atm ). Collapsed hydrogen bonding lowers its dielectric constant, making it act as a nonpolar solvent. Used in Supercritical Water Oxidation (SCWO) to combust toxic organic wastes into CO₂, H₂O, and salts.
4. Comparative Phase Topography: Normal CO 2 \text{CO}_2 CO 2 versus Anomalous H 2 O \text{H}_2\text{O} H 2 O
The slope of the fusion boundary is governed by the Clapeyron equation : d P d T = Δ H f u s T ( V l i q u i d − V s o l i d ) \frac{dP}{dT} = \frac{\Delta H_{fus}}{T (V_{liquid} - V_{solid})} d T d P = T ( V l i q u i d − V so l i d ) Δ H f u s
Because melting is endothermic ( Δ H f u s > 0 \Delta H_{fus} > 0 Δ H f u s > 0 ), the sign of d P / d T dP/dT d P / d T depends entirely on Δ V f u s = V l i q u i d − V s o l i d \Delta V_{fus} = V_{liquid} - V_{solid} Δ V f u s = V l i q u i d − V so l i d .
Carbon Dioxide (Typical Behavior)
Solids are denser than liquids ( V l i q u i d > V s o l i d ⟹ Δ V f u s > 0 V_{liquid} > V_{solid} \implies \Delta V_{fus} > 0 V l i q u i d > V so l i d ⟹ Δ V f u s > 0 ).
The fusion curve has a positive slope ( d P / d T > 0 dP/dT > 0 d P / d T > 0 , tilts right). Compressing liquid CO₂ causes it to freeze.
Sublimation at 1 atm: The triple point is 5.11 atm 5.11\text{ atm} 5.11 atm . Standard pressure ( 1.00 atm 1.00\text{ atm} 1.00 atm ) lies far below the triple point. Therefore, liquid CO₂ cannot exist at 1 atm 1\text{ atm} 1 atm . Solid dry ice sublimes directly to vapor at − 78.5 ∘ C -78.5^\circ\text{C} − 78. 5 ∘ C . Liquid CO₂ requires pressures ≥ 5.11 atm \ge 5.11\text{ atm} ≥ 5.11 atm .
Water (Anomalous Behavior)
Solid ice Ih has an open hexagonal hydrogen-bonded lattice with substantial void space. Upon melting, the framework partially collapses, packing molecules closer together. Liquid water is denser than solid ice at 0 °C ( ρ l i q = 1.000 g/cm 3 \rho_{liq} = 1.000\text{ g/cm}^3 ρ l i q = 1.000 g/cm 3 vs ρ i c e = 0.917 g/cm 3 \rho_{ice} = 0.917\text{ g/cm}^3 ρ i ce = 0.917 g/cm 3 ).
Thus, molar volume contracts: Δ V f u s = V l i q u i d − V s o l i d < 0 \Delta V_{fus} = V_{liquid} - V_{solid} < 0 Δ V f u s = V l i q u i d − V so l i d < 0 .
By the Clapeyron equation, the fusion curve has an anomalous negative slope ( d P / d T < 0 dP/dT < 0 d P / d T < 0 , tilts left).
Pressure-Induced Melting: Increasing pressure on ice slightly below 0 °C forces it to melt into the denser liquid phase without added heat. By Le Chatelier's principle, pressure favors the denser, lower-volume state.
Phase Sequence at 1 atm: Water's triple point ( 0.00603 atm 0.00603\text{ atm} 0.00603 atm ) lies far below 1.000 atm 1.000\text{ atm} 1.000 atm . Heating ice at 1 atm 1\text{ atm} 1 atm cleanly traverses solid → \to → liquid ( 0.00 ∘ C 0.00^\circ\text{C} 0.0 0 ∘ C ) → \to → gas ( 100.00 ∘ C 100.00^\circ\text{C} 100.0 0 ∘ C ).
5. Comparison Table of H 2 O \text{H}_2\text{O} H 2 O and CO 2 \text{CO}_2 CO 2 Phase Boundaries
Property Water ( H 2 O \text{H}_2\text{O} H 2 O ) Carbon Dioxide ( CO 2 \text{CO}_2 CO 2 )
Fusion Boundary Slope ( d P / d T dP/dT d P / d T ) Negative (tilts left, d P / d T < 0 dP/dT < 0 d P / d T < 0 ) Positive (tilts right, d P / d T > 0 dP/dT > 0 d P / d T > 0 )
Relative Density of Phases Liquid denser than solid ( ρ l i q > ρ s o l \rho_{liq} > \rho_{sol} ρ l i q > ρ so l ) Solid denser than liquid ( ρ s o l > ρ l i q \rho_{sol} > \rho_{liq} ρ so l > ρ l i q )
Molar Volume Change on Melting Negative ( Δ V f u s < 0 \Delta V_{fus} < 0 Δ V f u s < 0 ) Positive ( Δ V f u s > 0 \Delta V_{fus} > 0 Δ V f u s > 0 )
Effect of Pressure on Solid near T m T_m T m Induces melting into liquid Solidifies / preserves solid
Triple Point Coordinates 0.01 ∘ C 0.01^\circ\text{C} 0.0 1 ∘ C ( 273.16 K 273.16\text{ K} 273.16 K ), 0.00603 atm 0.00603\text{ atm} 0.00603 atm − 56.6 ∘ C -56.6^\circ\text{C} − 56. 6 ∘ C ( 216.6 K 216.6\text{ K} 216.6 K ), 5.11 atm 5.11\text{ atm} 5.11 atm
Critical Point Coordinates 374 ∘ C 374^\circ\text{C} 37 4 ∘ C ( 647 K 647\text{ K} 647 K ), 218 atm 218\text{ atm} 218 atm 31.0 ∘ C 31.0^\circ\text{C} 31. 0 ∘ C ( 304 K 304\text{ K} 304 K ), 72.8 atm 72.8\text{ atm} 72.8 atm
Phase Transition at 1.00 atm 1.00\text{ atm} 1.00 atm Solid → \to → Liquid ( 0 ∘ C 0^\circ\text{C} 0 ∘ C ) → \to → Gas ( 100 ∘ C 100^\circ\text{C} 10 0 ∘ C ) Solid → \to → Gas (Sublimes at − 78.5 ∘ C -78.5^\circ\text{C} − 78. 5 ∘ C )
Liquid Existence at 1.00 atm 1.00\text{ atm} 1.00 atm Stable between 0 ∘ C 0^\circ\text{C} 0 ∘ C and 100 ∘ C 100^\circ\text{C} 10 0 ∘ C Impossible; requires P ≥ 5.11 atm P \ge 5.11\text{ atm} P ≥ 5.11 atm
Underlying Molecular Basis Open hexagonal hydrogen-bonded ice network Close-packed nonpolar crystalline lattice