Study guide
15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds
CLEP Chemistry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Strategy
1.1 CLEP Chemistry Exam Structure, Calculator & Periodic Table 1.2 Quantitative Foundations: Units, Dimensional Analysis & Significant Figures 1.3 Effective Study Strategies & Recommended Course Pathway
2 Chapter 2: Atomic Theory, Isotopes & Nuclear Chemistry
2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry 2.2 Quantum Numbers, Atomic Spectra & Electron Configurations 2.3 Nuclear Chemistry: Radiation, Decay Kinetics & Nuclear Reactions
3 Chapter 3: Periodic Relationships & Periodicity
3.1 Periodic Law & Periodic Table Organization 3.2 Periodic Trends: Atomic/Ionic Radii, Ionization Energy, Electron Affinity & Electronegativity 3.3 Oxidation States & Valence Electron Trends
4 Chapter 4: Chemical Bonding & Molecular Structure
4.1 Ionic, Covalent, Polar Covalent & Metallic Bonding 4.2 Lewis Structures, Formal Charges & Resonance 4.3 VSEPR Theory, Molecular Geometries & Polarity 4.4 Valence Bond Theory, Hybridization & Sigma/Pi Bonding
5 Chapter 5: Gases & Kinetic Molecular Theory
5.1 Gas Laws & the Ideal Gas Equation (PV = nRT) 5.2 Gas Mixtures: Dalton's Law of Partial Pressures & Graham's Law 5.3 Kinetic Molecular Theory & Maxwell-Boltzmann Distribution 5.4 Real Gases & Deviations from Ideal Behavior (van der Waals Equation)
6 Chapter 6: Condensed Phases & Phase Changes
6.1 Intermolecular Forces in Liquids & Solids 6.2 Phase Changes, Heating Curves & Vapor Pressure 6.3 Phase Diagrams & Critical Phenomena
7 Chapter 7: Solutions & Colligative Properties
7.1 Solution Formation, Solubility Factors & Henry's Law 7.2 Concentration Units: Molarity, Molality, Mole Fraction & Mass Percent 7.3 Colligative Properties & Raoult's Law 7.4 Electrolytes, Interionic Attractions & the van 't Hoff Factor
8 Chapter 8: Chemical Equations & Stoichiometry
8.1 Chemical Equations, Types of Reactions & Net Ionic Equations 8.2 The Mole Concept, Molar Mass & Empirical/Molecular Formulas 8.3 Reaction Stoichiometry, Limiting Reactants & Percent Yield
9 Chapter 9: Aqueous Reaction Types
9.1 Precipitation Reactions & Solubility Rules 9.2 Acid-Base Reactions & Neutralization 9.3 Coordination Compounds & Complex Ion Formation
10 Chapter 10: Oxidation-Reduction Reactions & Electrochemistry
10.1 Oxidation States & Balancing Redox Reactions by Half-Reaction Method 10.2 Voltaic (Galvanic) Cells & Standard Reduction Potentials 10.3 Cell Potential, Gibbs Free Energy & Equilibrium (Nernst Equation) 10.4 Electrolytic Cells & Faraday's Laws of Electrolysis
11 Chapter 11: Chemical Equilibrium & Dynamic Systems
11.1 Nature of Dynamic Equilibrium & Equilibrium Expressions (Kc, Kp) 11.2 Le Chatelier's Principle & Perturbations to Systems at Equilibrium 11.3 Equilibrium Calculations & the Reaction Quotient (Q vs K)
12 Chapter 12: Aqueous Equilibria: Acids, Bases & Solubility
12.1 Autoionization of Water, pH Scale & Strong vs Weak Acids/Bases 12.2 Acid-Base Equilibria (Ka, Kb), Polyprotic Acids & Salt Hydrolysis 12.3 Buffer Systems, Henderson-Hasselbalch Equation & Solubility Product (Ksp)
13 Chapter 13: Reaction Kinetics & Rate Laws
13.1 Reaction Rates, Rate Laws & Determination of Reaction Order 13.2 Integrated Rate Laws, Graphical Methods & Half-Lives 13.3 Collision Theory, Activation Energy & the Arrhenius Equation 13.4 Reaction Mechanisms, Elementary Steps & Catalysis
14 Chapter 14: Thermochemistry & Thermodynamics
14.1 Energy, Heat, Work & the First Law of Thermodynamics 14.2 Calorimetry, Specific Heat & Enthalpy (ΔH) 14.3 Hess's Law & Standard Enthalpies of Formation 14.4 Entropy (ΔS), Gibbs Free Energy (ΔG) & Spontaneity
15 Chapter 15: Descriptive Chemistry of the Elements
15.1 Horizontal, Vertical & Diagonal Periodic Relationships 15.2 Representative Main-Group Chemistry: Alkali, Alkaline Earth & Halogens 15.3 Transition Metals: Configurations, Colors & Common Reactivity 15.4 Main Groups 13–16 & Hydrogen: Characteristic Compounds and Reaction Products 15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds
16 Chapter 16: Fundamentals of Organic Chemistry
16.1 Hydrocarbons: Alkanes, Alkenes, Alkynes & Aromatic Systems 16.2 Major Functional Groups & IUPAC Nomenclature 16.3 Structural & Geometric Isomerism in Organic Compounds
17 Chapter 17: Laboratory Techniques & Analytical Methods
17.1 Essential Laboratory Apparatus & Measurement Uncertainty 17.2 Quantitative Analytical Methods: Titration & Gravimetric Analysis 17.3 Spectrophotometry, Beer's Law & Chromatography
18 Chapter 18: Laboratory Safety, Error Analysis & Scientific Deduction
18.1 Chemical Hazards, SDS/GHS Standards & Safety Protocols 18.2 Error Analysis: Systematic vs Random Errors & Percent Error 18.3 Data Interpretation, Graphical Analysis & Scientific Deduction
15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds
Key Takeaways Explain This Topic AI
Ionic compounds are named cation first, then anion, with no Greek prefixes; metals with more than one common charge take a Roman numeral, as in iron(III) sulfate for Fe2(SO4)3.
Chlorine oxoanions follow the per-ate, -ate, -ite, hypo-ite pattern: ClO4- perchlorate, ClO3- chlorate, ClO2- chlorite, and ClO- hypochlorite.
Binary molecular compounds use Greek prefixes to show atom counts, dropping mono- on the first element, as in dinitrogen tetroxide for N2O4.
Acid names follow the anion: -ide anions give hydro-ic acids (HCl(aq) hydrochloric), -ate anions give -ic acids (HNO3 nitric), and -ite anions give -ous acids (HNO2 nitrous).
Last updated: September 2026
15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds
Quick Summary: The CLEP outline says descriptive chemistry should "develop an understanding of systematic nomenclature that facilitates communication." Nearly every question names substances, so a naming error can cost points even when the chemistry is understood. This section covers the naming rules for ionic compounds (including Stock-system Roman numerals), the common polyatomic ions, acids, hydrates, and binary molecular compounds. Coordination compounds are named in Section 9.3 and organic compounds in Section 16.2.
1. Monatomic Ions and Binary Ionic Compounds
Cations keep the element name: Na + \text{Na}^+ Na + is sodium ion, Al 3 + \text{Al}^{3+} Al 3 + is aluminum ion.
Anions take the suffix -ide : chloride ( Cl − \text{Cl}^- Cl − ), oxide ( O 2 − \text{O}^{2-} O 2 − ), sulfide ( S 2 − \text{S}^{2-} S 2 − ), nitride ( N 3 − \text{N}^{3-} N 3 − ), phosphide ( P 3 − \text{P}^{3-} P 3 − ), hydride ( H − \text{H}^- H − ).
Binary ionic compound: cation name + anion name, with no prefixes: MgCl 2 \text{MgCl}_2 MgCl 2 is magnesium chloride and Al 2 O 3 \text{Al}_2\text{O}_3 Al 2 O 3 is aluminum oxide. The charges already fix the formula, so prefixes are never used for ionic compounds.
Metals with More Than One Common Charge (Stock System)
Transition and post-transition metals that form more than one ion show the charge as a Roman numeral:
- Formula Stock name Older (-ous/-ic) name
- FeCl 2 \text{FeCl}_2 FeCl 2 iron(II) chloride ferrous chloride
- Fe 2 O 3 \text{Fe}_2\text{O}_3 Fe 2 O 3 iron(III) oxide ferric oxide
- Cu 2 O \text{Cu}_2\text{O} Cu 2 O copper(I) oxide cuprous oxide
- CuSO 4 \text{CuSO}_4 CuSO 4 copper(II) sulfate cupric sulfate
- SnCl 4 \text{SnCl}_4 SnCl 4 tin(IV) chloride stannic chloride
- PbO \text{PbO} PbO lead(II) oxide plumbous oxide
- Hg 2 Cl 2 \text{Hg}_2\text{Cl}_2 Hg 2 Cl 2 mercury(I) chloride mercurous chloride
The older system uses -ous for the lower charge and -ic for the higher charge. Metals with only one common ion (Group 1, Group 2, Al, and usually Zn 2 + \text{Zn}^{2+} Zn 2 + and Ag + \text{Ag}^+ Ag + ) do not take a Roman numeral. Mercury(I) is the diatomic ion Hg 2 2 + \text{Hg}_2^{2+} Hg 2 2 + , so its chloride is Hg 2 Cl 2 \text{Hg}_2\text{Cl}_2 Hg 2 Cl 2 , not HgCl.
To find the Roman numeral, work backward from the anion charges: in Fe 2 ( SO 4 ) 3 \text{Fe}_2(\text{SO}_4)_3 Fe 2 ( SO 4 ) 3 , three sulfates give − 6 -6 − 6 , so each of the two irons is + 3 +3 + 3 , and the name is iron(III) sulfate.
2. Common Polyatomic Ions
- Ion Name Ion Name
- NH 4 + \text{NH}_4^+ NH 4 + ammonium OH − \text{OH}^- OH − hydroxide
- H 3 O + \text{H}_3\text{O}^+ H 3 O + hydronium CN − \text{CN}^- CN − cyanide
- NO 3 − \text{NO}_3^- NO 3 − nitrate NO 2 − \text{NO}_2^- NO 2 − nitrite
- SO 4 2 − \text{SO}_4^{2-} SO 4 2 − sulfate SO 3 2 − \text{SO}_3^{2-} SO 3 2 − sulfite
HSO 4 − \text{HSO}_4^- HSO 4 − hydrogen sulfate (bisulfate) S 2 O 3 2 − \text{S}_2\text{O}_3^{2-} S 2 O 3 2 − thiosulfate
CO 3 2 − \text{CO}_3^{2-} CO 3 2 − carbonate HCO 3 − \text{HCO}_3^- HCO 3 − hydrogen carbonate (bicarbonate)
PO 4 3 − \text{PO}_4^{3-} PO 4 3 − phosphate HPO 4 2 − \text{HPO}_4^{2-} HPO 4 2 − hydrogen phosphate
H 2 PO 4 − \text{H}_2\text{PO}_4^- H 2 PO 4 − dihydrogen phosphate C 2 H 3 O 2 − \text{C}_2\text{H}_3\text{O}_2^- C 2 H 3 O 2 − acetate
MnO 4 − \text{MnO}_4^- MnO 4 − permanganate C 2 O 4 2 − \text{C}_2\text{O}_4^{2-} C 2 O 4 2 − oxalate
CrO 4 2 − \text{CrO}_4^{2-} CrO 4 2 − chromate Cr 2 O 7 2 − \text{Cr}_2\text{O}_7^{2-} Cr 2 O 7 2 − dichromate
- SCN − \text{SCN}^- SCN − thiocyanate O 2 2 − \text{O}_2^{2-} O 2 2 − peroxide
- The Oxoanion Pattern
For a family of oxoanions of the same element, the endings and prefixes track the number of oxygens:
- Chlorine oxoanion Name Oxidation state of Cl
- ClO 4 − \text{ClO}_4^- ClO 4 − per chlor ate +7
- ClO 3 − \text{ClO}_3^- ClO 3 − chlor ate +5
- ClO 2 − \text{ClO}_2^- ClO 2 − chlor ite +3
- ClO − \text{ClO}^- ClO − hypo chlor ite +1
The same pattern names the bromine and iodine oxoanions (bromate BrO 3 − \text{BrO}_3^- BrO 3 − , periodate IO 4 − \text{IO}_4^- IO 4 − ). The -ate ion is the reference form; -ite has one fewer oxygen with the same charge.
Writing Formulas from Names
Balance the total positive and negative charge with the smallest whole-number ratio, and put parentheses around a polyatomic ion that appears more than once: calcium phosphate is Ca 3 ( PO 4 ) 2 \text{Ca}_3(\text{PO}_4)_2 Ca 3 ( PO 4 ) 2 ( 3 × ( + 2 ) = + 6 3 \times (+2) = +6 3 × ( + 2 ) = + 6 and 2 × ( − 3 ) = − 6 2 \times (-3) = -6 2 × ( − 3 ) = − 6 ), and ammonium sulfate is ( NH 4 ) 2 SO 4 (\text{NH}_4)_2\text{SO}_4 ( NH 4 ) 2 SO 4 .
Hydrates
A hydrate's name gives the number of water molecules per formula unit with a Greek prefix: CuSO 4 ⋅ 5 H 2 O \text{CuSO}_4 \cdot 5\,\text{H}_2\text{O} CuSO 4 ⋅ 5 H 2 O is copper(II) sulfate pentahydrate, and MgSO 4 ⋅ 7 H 2 O \text{MgSO}_4 \cdot 7\,\text{H}_2\text{O} MgSO 4 ⋅ 7 H 2 O is magnesium sulfate heptahydrate.
3. Binary Molecular (Covalent) Compounds
Two nonmetals combine in more than one ratio, so the name must state the counts with Greek prefixes: mono- (1), di- (2), tri- (3), tetra- (4), penta- (5), hexa- (6), hepta- (7), octa- (8), nona- (9), deca- (10).
Name the less electronegative element first (it is usually written first).
Give the second element an -ide ending.
Omit mono- on the first element, and drop the final a or o of a prefix before "oxide."
- Formula Name
- CO \text{CO} CO carbon monoxide
- CO 2 \text{CO}_2 CO 2 carbon dioxide
- N 2 O 4 \text{N}_2\text{O}_4 N 2 O 4 dinitrogen tetroxide
- N 2 O 5 \text{N}_2\text{O}_5 N 2 O 5 dinitrogen pentoxide
- P 4 O 10 \text{P}_4\text{O}_{10} P 4 O 10 tetraphosphorus decoxide
- SF 6 \text{SF}_6 SF 6 sulfur hexafluoride
- CCl 4 \text{CCl}_4 CCl 4 carbon tetrachloride
Some molecular compounds keep common names that you should recognize: water, ammonia ( NH 3 \text{NH}_3 NH 3 ), methane ( CH 4 \text{CH}_4 CH 4 ), hydrazine ( N 2 H 4 \text{N}_2\text{H}_4 N 2 H 4 ), and nitrous oxide ( N 2 O \text{N}_2\text{O} N 2 O , systematically dinitrogen monoxide).
4. Naming Acids
Anion ending Acid name pattern Examples
-ide (no oxygen) hydro ___ ic acid (aqueous only) HCl ( a q ) \text{HCl}(aq) HCl ( a q ) hydrochloric acid; HF ( a q ) \text{HF}(aq) HF ( a q ) hydrofluoric acid; H 2 S ( a q ) \text{H}_2\text{S}(aq) H 2 S ( a q ) hydrosulfuric acid; HCN ( a q ) \text{HCN}(aq) HCN ( a q ) hydrocyanic acid
-ate ___ ic acid HNO 3 \text{HNO}_3 HNO 3 nitric; H 2 SO 4 \text{H}_2\text{SO}_4 H 2 SO 4 sulfuric; H 3 PO 4 \text{H}_3\text{PO}_4 H 3 PO 4 phosphoric; HClO 3 \text{HClO}_3 HClO 3 chloric; HClO 4 \text{HClO}_4 HClO 4 perchloric; HC 2 H 3 O 2 \text{HC}_2\text{H}_3\text{O}_2 HC 2 H 3 O 2 acetic
-ite ___ ous acid HNO 2 \text{HNO}_2 HNO 2 nitrous; H 2 SO 3 \text{H}_2\text{SO}_3 H 2 SO 3 sulfurous; HClO 2 \text{HClO}_2 HClO 2 chlorous; HClO \text{HClO} HClO hypochlorous
The hydro- prefix applies only to binary acids in water: pure HCl ( g ) \text{HCl}(g) HCl ( g ) is hydrogen chloride, and it becomes hydrochloric acid when dissolved. A quick memory aid is "ate becomes -ic, ite becomes -ous."
5. Worked Examples
Name Fe 2 ( SO 4 ) 3 \text{Fe}_2(\text{SO}_4)_3 Fe 2 ( SO 4 ) 3 : sulfate is 2 − 2- 2 − ; three sulfates total − 6 -6 − 6 , so each Fe is + 3 +3 + 3 . The name is iron(III) sulfate .
Write the formula for ammonium dichromate: NH 4 + \text{NH}_4^+ NH 4 + and Cr 2 O 7 2 − \text{Cr}_2\text{O}_7^{2-} Cr 2 O 7 2 − combine 2 : 1, giving ( NH 4 ) 2 Cr 2 O 7 (\text{NH}_4)_2\text{Cr}_2\text{O}_7 ( NH 4 ) 2 Cr 2 O 7 .
Name KClO: ClO − \text{ClO}^- ClO − has one fewer oxygen than chlorite, so it is hypochlorite. The name is potassium hypochlorite , the active ingredient of bleach.
Name HNO 2 ( a q ) \text{HNO}_2(aq) HNO 2 ( a q ) : it comes from nitrite, so the acid is nitrous acid .
Name N 2 O 5 \text{N}_2\text{O}_5 N 2 O 5 : two nonmetals, so prefixes are needed. The name is dinitrogen pentoxide , the acid anhydride of nitric acid.
Spot the error in "copper oxide" for Cu 2 O \text{Cu}_2\text{O} Cu 2 O : copper forms + 1 +1 + 1 and + 2 +2 + 2 ions, so the Roman numeral is required. Two Cu + \text{Cu}^+ Cu + balance one O 2 − \text{O}^{2-} O 2 − , and the correct name is copper(I) oxide .