Study guide

7.1 Solution Formation, Solubility Factors & Henry's Law

CLEP Chemistry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Strategy

1.1 CLEP Chemistry Exam Structure, Calculator & Periodic Table 1.2 Quantitative Foundations: Units, Dimensional Analysis & Significant Figures 1.3 Effective Study Strategies & Recommended Course Pathway

2 Chapter 2: Atomic Theory, Isotopes & Nuclear Chemistry

2.1 Evolution of Atomic Theory, Subatomic Particles & Mass Spectrometry 2.2 Quantum Numbers, Atomic Spectra & Electron Configurations 2.3 Nuclear Chemistry: Radiation, Decay Kinetics & Nuclear Reactions

3 Chapter 3: Periodic Relationships & Periodicity

3.1 Periodic Law & Periodic Table Organization 3.2 Periodic Trends: Atomic/Ionic Radii, Ionization Energy, Electron Affinity & Electronegativity 3.3 Oxidation States & Valence Electron Trends

4 Chapter 4: Chemical Bonding & Molecular Structure

4.1 Ionic, Covalent, Polar Covalent & Metallic Bonding 4.2 Lewis Structures, Formal Charges & Resonance 4.3 VSEPR Theory, Molecular Geometries & Polarity 4.4 Valence Bond Theory, Hybridization & Sigma/Pi Bonding

5 Chapter 5: Gases & Kinetic Molecular Theory

5.1 Gas Laws & the Ideal Gas Equation (PV = nRT) 5.2 Gas Mixtures: Dalton's Law of Partial Pressures & Graham's Law 5.3 Kinetic Molecular Theory & Maxwell-Boltzmann Distribution 5.4 Real Gases & Deviations from Ideal Behavior (van der Waals Equation)

6 Chapter 6: Condensed Phases & Phase Changes

6.1 Intermolecular Forces in Liquids & Solids 6.2 Phase Changes, Heating Curves & Vapor Pressure 6.3 Phase Diagrams & Critical Phenomena

7 Chapter 7: Solutions & Colligative Properties

7.1 Solution Formation, Solubility Factors & Henry's Law 7.2 Concentration Units: Molarity, Molality, Mole Fraction & Mass Percent 7.3 Colligative Properties & Raoult's Law 7.4 Electrolytes, Interionic Attractions & the van 't Hoff Factor

8 Chapter 8: Chemical Equations & Stoichiometry

8.1 Chemical Equations, Types of Reactions & Net Ionic Equations 8.2 The Mole Concept, Molar Mass & Empirical/Molecular Formulas 8.3 Reaction Stoichiometry, Limiting Reactants & Percent Yield

9 Chapter 9: Aqueous Reaction Types

9.1 Precipitation Reactions & Solubility Rules 9.2 Acid-Base Reactions & Neutralization 9.3 Coordination Compounds & Complex Ion Formation

10 Chapter 10: Oxidation-Reduction Reactions & Electrochemistry

10.1 Oxidation States & Balancing Redox Reactions by Half-Reaction Method 10.2 Voltaic (Galvanic) Cells & Standard Reduction Potentials 10.3 Cell Potential, Gibbs Free Energy & Equilibrium (Nernst Equation) 10.4 Electrolytic Cells & Faraday's Laws of Electrolysis

11 Chapter 11: Chemical Equilibrium & Dynamic Systems

11.1 Nature of Dynamic Equilibrium & Equilibrium Expressions (Kc, Kp) 11.2 Le Chatelier's Principle & Perturbations to Systems at Equilibrium 11.3 Equilibrium Calculations & the Reaction Quotient (Q vs K)

12 Chapter 12: Aqueous Equilibria: Acids, Bases & Solubility

12.1 Autoionization of Water, pH Scale & Strong vs Weak Acids/Bases 12.2 Acid-Base Equilibria (Ka, Kb), Polyprotic Acids & Salt Hydrolysis 12.3 Buffer Systems, Henderson-Hasselbalch Equation & Solubility Product (Ksp)

13 Chapter 13: Reaction Kinetics & Rate Laws

13.1 Reaction Rates, Rate Laws & Determination of Reaction Order 13.2 Integrated Rate Laws, Graphical Methods & Half-Lives 13.3 Collision Theory, Activation Energy & the Arrhenius Equation 13.4 Reaction Mechanisms, Elementary Steps & Catalysis

14 Chapter 14: Thermochemistry & Thermodynamics

14.1 Energy, Heat, Work & the First Law of Thermodynamics 14.2 Calorimetry, Specific Heat & Enthalpy (ΔH) 14.3 Hess's Law & Standard Enthalpies of Formation 14.4 Entropy (ΔS), Gibbs Free Energy (ΔG) & Spontaneity

15 Chapter 15: Descriptive Chemistry of the Elements

15.1 Horizontal, Vertical & Diagonal Periodic Relationships 15.2 Representative Main-Group Chemistry: Alkali, Alkaline Earth & Halogens 15.3 Transition Metals: Configurations, Colors & Common Reactivity 15.4 Main Groups 13–16 & Hydrogen: Characteristic Compounds and Reaction Products 15.5 Systematic Inorganic Nomenclature: Ionic Compounds, Polyatomic Ions, Acids & Molecular Compounds

16 Chapter 16: Fundamentals of Organic Chemistry

16.1 Hydrocarbons: Alkanes, Alkenes, Alkynes & Aromatic Systems 16.2 Major Functional Groups & IUPAC Nomenclature 16.3 Structural & Geometric Isomerism in Organic Compounds

17 Chapter 17: Laboratory Techniques & Analytical Methods

17.1 Essential Laboratory Apparatus & Measurement Uncertainty 17.2 Quantitative Analytical Methods: Titration & Gravimetric Analysis 17.3 Spectrophotometry, Beer's Law & Chromatography

18 Chapter 18: Laboratory Safety, Error Analysis & Scientific Deduction

18.1 Chemical Hazards, SDS/GHS Standards & Safety Protocols 18.2 Error Analysis: Systematic vs Random Errors & Percent Error 18.3 Data Interpretation, Graphical Analysis & Scientific Deduction

7.1 Solution Formation, Solubility Factors & Henry's Law

Key Takeaways Explain This Topic AI

A solution is a homogeneous mixture comprising a solute dispersed in a solvent; dynamic equilibrium at saturation balances dissolution and crystallization rates.

The enthalpy of solution depends on three components: ΔH_soln = ΔH_solute + ΔH_solvent + ΔH_mix, where endothermic lattice separation competes with exothermic hydration.

The 'like dissolves like' principle governs solubility: polar/ionic substances dissolve in polar solvents, while nonpolar substances dissolve in nonpolar solvents driven by entropy of mixing and avoidance of the hydrophobic effect.

Temperature affects solubility based on dissolution thermochemistry: endothermic dissolutions increase solubility with heat, while gas dissolution in water is typically exothermic, so gas solubility generally decreases with rising temperature.

Henry's law (C = k_H · P_gas) dictates that gas solubility is directly proportional to partial pressure, explaining carbonation effervescence and decompression sickness in diving.

Last updated: September 2026

7.1 Solution Formation, Solubility Factors & Henry's Law

Quick Summary: A solution forms when solute particles disperse homogeneously within a solvent. The overall enthalpy of solution ( Δ H soln \Delta H_{\text{soln}} Δ H soln ​ ) represents a balance between endothermic solute separation, endothermic solvent cavity formation, and exothermic solute-solvent attraction (hydration). Dissolution is driven by a favorable increase in entropy of mixing ( Δ S mix > 0 \Delta S_{\text{mix}} > 0 Δ S mix ​ > 0 ). While most solid solutes dissolve more readily at elevated temperatures, gas dissolution in water is typically exothermic, so gas solubility generally decreases as temperature climbs. Henry's law ( C = k H P gas C = k_{\text{H}} P_{\text{gas}} C = k H ​ P gas ​ ) quantitatively relates gas solubility to partial pressure above the solution.

1. Solution Terminology & Saturation Equilibria

A solution is a homogeneous mixture existing as a single phase. The component present in the largest molar amount is the solvent , while the dispersed species is the solute :

Unsaturated Solution: Contains less dissolved solute than the thermodynamic equilibrium limit at a given temperature; added solute dissolves readily.

Saturated Solution: Solute and dissolved particles exist in dynamic equilibrium: Undissolved Solute ⇌ Dissolved Solute \text{Undissolved Solute} \rightleftharpoons \text{Dissolved Solute} Undissolved Solute ⇌ Dissolved Solute The rate of dissolution equals the rate of crystallization. The concentration of dissolved solute at this equilibrium is the substance's solubility .

Supersaturated Solution: Contains more dissolved solute than the equilibrium saturation limit, prepared by cooling a saturated solution slowly in a pristine vessel. Supersaturated solutions are metastable; introducing a microscopic seed crystal or mechanical agitation triggers rapid crystallization of excess solute until equilibrium is restored.

2. Thermodynamics of Solution Formation

Dissolution involves three energetic steps modeled in a thermodynamic cycle:

Solute Separation ( Δ H solute > 0 \Delta H_{\text{solute}} > 0 Δ H solute ​ > 0 ): Energy consumed to overcome attractive forces holding solute particles together. For crystalline ionic salts, this endothermic quantity equals the crystal lattice energy ( Δ H solute = − Δ H lattice > 0 \Delta H_{\text{solute}} = -\Delta H_{\text{lattice}} > 0 Δ H solute ​ = − Δ H lattice ​ > 0 ).

Solvent Expansion ( Δ H solvent > 0 \Delta H_{\text{solvent}} > 0 Δ H solvent ​ > 0 ): Energy consumed to disrupt solvent-solvent interactions (e.g., hydrogen bonds in water) to create cavities for solute species.

Solvation / Mixing ( Δ H mix < 0 \Delta H_{\text{mix}} < 0 Δ H mix ​ < 0 ): Energy released as attractive forces form between solute and solvent molecules. In water, combining steps 2 and 3 defines the hydration enthalpy ( Δ H hyd = Δ H solvent + Δ H mix < 0 \Delta H_{\text{hyd}} = \Delta H_{\text{solvent}} + \Delta H_{\text{mix}} < 0 Δ H hyd ​ = Δ H solvent ​ + Δ H mix ​ < 0 ).

By Hess's law: Δ H soln = Δ H solute + Δ H solvent + Δ H mix \Delta H_{\text{soln}} = \Delta H_{\text{solute}} + \Delta H_{\text{solvent}} + \Delta H_{\text{mix}} Δ H soln ​ = Δ H solute ​ + Δ H solvent ​ + Δ H mix ​

Exothermic Dissolution ( Δ H soln < 0 \Delta H_{\text{soln}} < 0 Δ H soln ​ < 0 ): Occurs when hydration energy exceeds component separation energies ( ∣ Δ H mix ∣ > Δ H solute + Δ H solvent |\Delta H_{\text{mix}}| > \Delta H_{\text{solute}} + \Delta H_{\text{solvent}} ∣Δ H mix ​ ∣ > Δ H solute ​ + Δ H solvent ​ ), as seen with CaCl 2 \text{CaCl}_2 CaCl 2 ​ (used in some instant hot packs) and NaOH \text{NaOH} NaOH .

Endothermic Dissolution ( Δ H soln > 0 \Delta H_{\text{soln}} > 0 Δ H soln ​ > 0 ): Occurs when separation energies exceed hydration release, as seen with NH 4 NO 3 \text{NH}_4\text{NO}_3 NH 4 ​ NO 3 ​ (used in instant cold packs) and KCl \text{KCl} KCl .

Entropy of Mixing & Gibbs Free Energy

Endothermic salts dissolve spontaneously because dissolution disperses matter and energy: Δ G soln = Δ H soln − T Δ S soln \Delta G_{\text{soln}} = \Delta H_{\text{soln}} - T\Delta S_{\text{soln}} Δ G soln ​ = Δ H soln ​ − T Δ S soln ​

Transitioning a rigid ionic lattice into mobile hydrated ions creates a large positive entropy of mixing ( Δ S soln > 0 \Delta S_{\text{soln}} > 0 Δ S soln ​ > 0 ). At room temperature, − T Δ S soln -T\Delta S_{\text{soln}} − T Δ S soln ​ outweighs positive Δ H soln \Delta H_{\text{soln}} Δ H soln ​ , yielding Δ G soln < 0 \Delta G_{\text{soln}} < 0 Δ G soln ​ < 0 .

3. "Like Dissolves Like" & the Hydrophobic Effect

Polar/Ionic Solutes in Polar Solvents: Water dissolves salts and small alcohols because ion-dipole and dipole-dipole attractions provide sufficient hydration energy to offset separation enthalpies.

Nonpolar Solutes in Nonpolar Solvents: Hydrocarbons mix freely in nonpolar solvents (e.g., heptane in hexane) because dispersion forces in solution are comparable to those in pure components ( Δ H soln ≈ 0 \Delta H_{\text{soln}} \approx 0 Δ H soln ​ ≈ 0 ), making positive entropy the driving force.

The Hydrophobic Effect: Nonpolar molecules cannot form dipole interactions with water. To accommodate them, water molecules must organize into ordered, hydrogen-bonded clathrate cages. This rigid ordering produces an unfavorable decrease in water entropy ( Δ S < 0 \Delta S < 0 Δ S < 0 ), causing Δ G soln > 0 \Delta G_{\text{soln}} > 0 Δ G soln ​ > 0 and driving phase separation (immiscibility).

  • 4. Factors Affecting Solubility
  • Temperature Dependence

Solids in Liquids: By Le Chatelier's principle:

Endothermic dissolution ( Δ H soln > 0 \Delta H_{\text{soln}} > 0 Δ H soln ​ > 0 ): solubility increases with temperature ( KNO 3 \text{KNO}_3 KNO 3 ​ , glucose).

Exothermic dissolution ( Δ H soln < 0 \Delta H_{\text{soln}} < 0 Δ H soln ​ < 0 ): solubility decreases with temperature ( Ce 2 ( SO 4 ) 3 \text{Ce}_2(\text{SO}_4)_3 Ce 2 ​ ( SO 4 ​ ) 3 ​ , Na 2 SO 4 \text{Na}_2\text{SO}_4 Na 2 ​ SO 4 ​ above 32 °C).

Gases in Liquids: Gas molecules already possess translational independence ( Δ H solute ≈ 0 \Delta H_{\text{solute}} \approx 0 Δ H solute ​ ≈ 0 ). Dissolution in water is typically exothermic ( Δ H soln < 0 \Delta H_{\text{soln}} < 0 Δ H soln ​ < 0 ) and decreases entropy ( Δ S < 0 \Delta S < 0 Δ S < 0 ). Added thermal energy allows dissolved gases to overcome solvent attractions and escape; thus, gas solubility in water generally decreases as temperature increases .

Thermal Pollution: Industrial power plants returning heated water to lakes deplete dissolved O 2 O_2 O 2 ​ , suffocating aquatic fauna.

Pressure Dependence: Henry's Law

Pressure negligibly affects solids and liquids but dictates gas solubility. Henry's Law states that gas solubility ( C C C ) is directly proportional to its partial pressure ( P gas P_{\text{gas}} P gas ​ ) above the liquid: C = k H P gas or S 1 P 1 = S 2 P 2 C = k_{\text{H}} P_{\text{gas}} \quad \text{or} \quad \frac{S_1}{P_1} = \frac{S_2}{P_2} C = k H ​ P gas ​ or P 1 ​ S 1 ​ ​ = P 2 ​ S 2 ​ ​

Higher partial pressure increases gas-liquid surface collision frequency, establishing equilibrium at higher dissolved concentration.

Practical Applications

Carbonated Beverages: Bottled under 3–5 atm CO 2 \text{CO}_2 CO 2 ​ . Opening lowers CO 2 \text{CO}_2 CO 2 ​ partial pressure to atmospheric levels ( 0.0004 atm 0.0004\text{ atm} 0.0004 atm ), driving CO 2 \text{CO}_2 CO 2 ​ out of solution as effervescent bubbles.

Decompression Sickness ("The Bends"): Divers breathing compressed air at depth dissolve excess N 2 \text{N}_2 N 2 ​ into blood and tissues. Rapid ascent depressurizes blood faster than gas can be exhaled, forming debilitating N 2 \text{N}_2 N 2 ​ gas bubbles in joints and capillaries. Prevented by slow staged ascent or heliox mixtures.

5. Solubility Factors Summary

Parameter Solid Solute in Liquid Gas Solute in Liquid

Temperature Rise Increases if Δ H > 0 \Delta H > 0 Δ H > 0 ; decreases if Δ H < 0 \Delta H < 0 Δ H < 0 Generally decreases in water ( Δ H soln < 0 \Delta H_{\text{soln}} < 0 Δ H soln ​ < 0 )

Pressure Rise Negligible impact Increases proportionally ( C = k H P C = k_{\text{H}} P C = k H ​ P )

Surface Area / Stirring Increases dissolution rate , not equilibrium solubility Increases rate of equilibration with headspace

6. Worked Example: Henry's Law Calculation

Problem: At 20.0 °C, the Henry's law constant for N 2 \text{N}_2 N 2 ​ in water is 6.8 × 10 − 4 mol/(L ⋅ atm) 6.8 \times 10^{-4}\text{ mol/(L}\cdot\text{atm)} 6.8 × 1 0 − 4 mol/(L ⋅ atm) . Air is 78.0% N 2 \text{N}_2 N 2 ​ by volume.

Find the solubility of N 2 \text{N}_2 N 2 ​ in water at 1.00 atm 1.00\text{ atm} 1.00 atm air pressure.

Find the solubility at an underwater depth where total pressure is 3.50 atm 3.50\text{ atm} 3.50 atm .

Step 1: Calculate partial pressures of N 2 \text{N}_2 N 2 ​ P N 2 , 1 = 0.780 × 1.00 atm = 0.780 atm P_{\text{N}_2, 1} = 0.780 \times 1.00\text{ atm} = 0.780\text{ atm} P N 2 ​ , 1 ​ = 0.780 × 1.00 atm = 0.780 atm P N 2 , 2 = 0.780 × 3.50 atm = 2.73 atm P_{\text{N}_2, 2} = 0.780 \times 3.50\text{ atm} = 2.73\text{ atm} P N 2 ​ , 2 ​ = 0.780 × 3.50 atm = 2.73 atm

Step 2: Apply Henry's Law C 1 = ( 6.8 × 10 − 4 mol/(L ⋅ atm) ) × 0.780 atm = 5.3 × 10 − 4 mol/L C_1 = (6.8 \times 10^{-4}\text{ mol/(L}\cdot\text{atm)}) \times 0.780\text{ atm} = 5.3 \times 10^{-4}\text{ mol/L} C 1 ​ = ( 6.8 × 1 0 − 4 mol/(L ⋅ atm) ) × 0.780 atm = 5.3 × 1 0 − 4 mol/L C 2 = ( 6.8 × 10 − 4 mol/(L ⋅ atm) ) × 2.73 atm = 1.9 × 10 − 3 mol/L C_2 = (6.8 \times 10^{-4}\text{ mol/(L}\cdot\text{atm)}) \times 2.73\text{ atm} = 1.9 \times 10^{-3}\text{ mol/L} C 2 ​ = ( 6.8 × 1 0 − 4 mol/(L ⋅ atm) ) × 2.73 atm = 1.9 × 1 0 − 3 mol/L

Dissolved N 2 \text{N}_2 N 2 ​ concentration increases 3.5-fold at depth, quantifying the risk of rapid ascent.