Study guide

3.2 Linear Functions, Slope & Graphs of Lines

CLEP College Algebra Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Overview

1.1 About the CLEP College Algebra Exam 1.2 Study Strategy & TI-30XS Calculator Mastery

2 Chapter 2: Algebraic Operations

2.1 Algebraic Expressions & Operations 2.2 Exponents & Scientific Notation 2.3 Factoring & Expanding Polynomials 2.4 Rational Expressions & Complex Fractions 2.5 Absolute Value & Radicals 2.6 Logarithmic Properties & Simplification

3 Chapter 3: Equations and Inequalities

3.1 Linear Equations & Linear Inequalities 3.2 Linear Functions, Slope & Graphs of Lines 3.3 Quadratic Equations & Quadratic Inequalities 3.4 Absolute Value Equations & Absolute Value Inequalities 3.5 Systems of Linear & Nonlinear Equations and Inequalities 3.6 Exponential & Logarithmic Equations

4 Chapter 4: Functions and Their Properties

4.1 Concept of a Function, Evaluation, Domain & Range 4.2 Representing & Modeling Functions: Verbal, Numerical, Graphical, Symbolic 4.3 Graphs of Functions, Intercepts, & Symmetry 4.4 Transformations of Functions 4.5 Algebra of Functions & Function Composition 4.6 Inverse Functions & Their Properties 4.7 Special Function Types: Polynomial, Rational, Piecewise & Power

5 Chapter 5: Number Systems and Operations

5.1 Real Number System & Order of Operations 5.2 Complex Numbers & Complex Arithmetic 5.3 Sequences, Series, & Factorials 5.4 The Binomial Theorem & Expansions

3.2 Linear Functions, Slope & Graphs of Lines

Key Takeaways Explain This Topic AI

Slope m = (y2 - y1)/(x2 - x1) is the constant rate of change of a linear function; it is undefined when x1 = x2, which is a vertical line.

Slope-intercept form y = mx + b reads the slope and y-intercept straight off the equation, while point-slope form y - y1 = m(x - x1) is the fastest way to build a line from a point and a slope.

Two distinct lines are parallel when m1 = m2 and perpendicular when m1 * m2 = -1, meaning their slopes are negative reciprocals.

A horizontal line y = k has slope 0 and is a function; a vertical line x = h has undefined slope and is not a function.

In an applied linear model f(x) = mx + b, the slope is the amount of change per unit of input and b is the starting or fixed value at x = 0.

Last updated: August 2026

3.2 Linear Functions, Slope & Graphs of Lines

The College Board's description of the CLEP College Algebra examination states that the test includes questions on linear and quadratic equations, inequalities, and graphs . Section 3.1 solved linear equations algebraically; this section handles the geometric half — the linear function f ( x ) = m x + b f(x) = mx + b f ( x ) = m x + b and the straight line that represents it. Lines also underpin systems of equations (Section 3.5), the feasible regions of linear inequality systems, transformations of the parent function f ( x ) = x f(x) = x f ( x ) = x , and every "rate of change" word problem on the exam.

Slope: The Constant Rate of Change

For any two distinct points ( x 1 , y 1 ) (x_1, y_1) ( x 1 ​ , y 1 ​ ) and ( x 2 , y 2 ) (x_2, y_2) ( x 2 ​ , y 2 ​ ) on a line, the slope is m = y 2 − y 1 x 2 − x 1 = rise run = Δ y Δ x , x 1 ≠ x 2 m = \frac{y_2 - y_1}{x_2 - x_1} = \frac{\text{rise}}{\text{run}} = \frac{\Delta y}{\Delta x}, \quad x_1 \neq x_2 m = x 2 ​ − x 1 ​ y 2 ​ − y 1 ​ ​ = run rise ​ = Δ x Δ y ​ , x 1 ​  = x 2 ​

What makes a function linear is that this ratio is the same for every pair of points you pick. That is the defining test: if a table of values shows equal changes in y y y for equal changes in x x x , the relationship is linear.

  • Slope Value Direction of the Line Reading It on a Graph
  • m > 0 m > 0 m > 0 Increasing Rises from left to right
  • m < 0 m < 0 m < 0 Decreasing Falls from left to right
  • m = 0 m = 0 m = 0 Constant Horizontal line y = k y = k y = k

m m m undefined Not a function Vertical line x = h x = h x = h ; the run is 0 0 0 , so the quotient is undefined

Sign Trap: Subtract the coordinates in the same order top and bottom. Using y 2 − y 1 x 1 − x 2 \frac{y_2 - y_1}{x_1 - x_2} x 1 ​ − x 2 ​ y 2 ​ − y 1 ​ ​ flips the sign of the slope, and the sign-flipped line is reliably offered as a distractor.

The Three Standard Forms of a Line

Form Equation Use It When

Slope-Intercept y = m x + b y = mx + b y = m x + b You want to read m m m and the y y y -intercept ( 0 , b ) (0, b) ( 0 , b ) directly, or graph quickly

Point-Slope y − y 1 = m ( x − x 1 ) y - y_1 = m(x - x_1) y − y 1 ​ = m ( x − x 1 ​ ) You know one point and the slope; this is the fastest construction form

Standard A x + B y = C Ax + By = C A x + B y = C You want intercepts fast, or you are setting up a system of equations

Converting is routine algebra: solve for y y y to reach slope-intercept form, or clear fractions and move the variable terms to the left to reach standard form. From A x + B y = C Ax + By = C A x + B y = C with B ≠ 0 B \neq 0 B  = 0 , the slope is m = − A B m = -\frac{A}{B} m = − B A ​ — a shortcut worth memorising because it avoids a full rearrangement when a question asks only for the slope.

Intercepts of a Line

y y y -intercept: set x = 0 x = 0 x = 0 and solve for y y y . In slope-intercept form it is simply ( 0 , b ) (0, b) ( 0 , b ) .

x x x -intercept: set y = 0 y = 0 y = 0 and solve for x x x . For y = m x + b y = mx + b y = m x + b with m ≠ 0 m \neq 0 m  = 0 , it is ( − b m , 0 ) \left(-\frac{b}{m}, 0\right) ( − m b ​ , 0 ) .

Worked Example 1: Building a Line From Two Points

Problem: Find the equation of the line through ( − 2 , 7 ) (-2, 7) ( − 2 , 7 ) and ( 4 , − 5 ) (4, -5) ( 4 , − 5 ) in slope-intercept form, then give both intercepts.

Compute the slope: m = − 5 − 7 4 − ( − 2 ) = − 12 6 = − 2 m = \frac{-5 - 7}{4 - (-2)} = \frac{-12}{6} = -2 m = 4 − ( − 2 ) − 5 − 7 ​ = 6 − 12 ​ = − 2

Apply point-slope form using ( − 2 , 7 ) (-2, 7) ( − 2 , 7 ) : y − 7 = − 2 ( x − ( − 2 ) ) = − 2 ( x + 2 ) y - 7 = -2(x - (-2)) = -2(x + 2) y − 7 = − 2 ( x − ( − 2 )) = − 2 ( x + 2 )

Solve for y y y : y − 7 = − 2 x − 4 ⟹ y = − 2 x + 3 y - 7 = -2x - 4 \implies y = -2x + 3 y − 7 = − 2 x − 4 ⟹ y = − 2 x + 3

Check with the other point: − 2 ( 4 ) + 3 = − 8 + 3 = − 5 -2(4) + 3 = -8 + 3 = -5 − 2 ( 4 ) + 3 = − 8 + 3 = − 5 ✓.

Intercepts: the y y y -intercept is ( 0 , 3 ) (0, 3) ( 0 , 3 ) . Setting y = 0 y = 0 y = 0 gives 0 = − 2 x + 3 ⟹ x = 3 2 0 = -2x + 3 \implies x = \frac{3}{2} 0 = − 2 x + 3 ⟹ x = 2 3 ​ , so the x x x -intercept is ( 3 2 , 0 ) \left(\frac{3}{2}, 0\right) ( 2 3 ​ , 0 ) .

Parallel and Perpendicular Lines

Parallel: two distinct lines are parallel exactly when m 1 = m 2 m_1 = m_2 m 1 ​ = m 2 ​ (and their y y y -intercepts differ). Same slope, same y y y -intercept means the lines coincide, not that they are parallel.

Perpendicular: m 1 ⋅ m 2 = − 1 m_1 \cdot m_2 = -1 m 1 ​ ⋅ m 2 ​ = − 1 , so each slope is the negative reciprocal of the other. A slope of 3 5 \frac{3}{5} 5 3 ​ pairs with − 5 3 -\frac{5}{3} − 3 5 ​ .

The exception: a horizontal line ( m = 0 m = 0 m = 0 ) and a vertical line (undefined slope) are perpendicular, but their slopes cannot be multiplied. Handle this pair by inspection rather than by formula.

Worked Example 2: Perpendicular Line Through a Point

Problem: Find the equation of the line perpendicular to 3 x − 4 y = 12 3x - 4y = 12 3 x − 4 y = 12 that passes through ( 6 , − 1 ) (6, -1) ( 6 , − 1 ) .

Find the given line's slope using m = − A B m = -\frac{A}{B} m = − B A ​ : m = − 3 − 4 = 3 4 m = -\frac{3}{-4} = \frac{3}{4} m = − − 4 3 ​ = 4 3 ​ .

Take the negative reciprocal: the perpendicular slope is − 4 3 -\frac{4}{3} − 3 4 ​ .

Apply point-slope form: y − ( − 1 ) = − 4 3 ( x − 6 ) ⟹ y + 1 = − 4 3 x + 8 y - (-1) = -\frac{4}{3}(x - 6) \implies y + 1 = -\frac{4}{3}x + 8 y − ( − 1 ) = − 3 4 ​ ( x − 6 ) ⟹ y + 1 = − 3 4 ​ x + 8

Solve for y y y : y = − 4 3 x + 7 y = -\frac{4}{3}x + 7 y = − 3 4 ​ x + 7

Verify perpendicularity: 3 4 ⋅ ( − 4 3 ) = − 1 \frac{3}{4} \cdot \left(-\frac{4}{3}\right) = -1 4 3 ​ ⋅ ( − 3 4 ​ ) = − 1 ✓.

Horizontal and Vertical Lines

Line Equation Slope Is It a Function?

Horizontal through ( a , k ) (a, k) ( a , k ) y = k y = k y = k 0 0 0 Yes — every input maps to the single output k k k

Vertical through ( h , b ) (h, b) ( h , b ) x = h x = h x = h Undefined No — it fails the Vertical Line Test

Students routinely swap these. Anchor them by remembering that y = k y = k y = k states what y y y always equals , which is a flat line, while x = h x = h x = h states what x x x always equals , which is an upright line.

Linear Models: Interpreting m m m and b b b in Context

When a linear function models a real situation, both parameters carry meaning: f ( x ) = m ⏟ change per unit of x ⋅ x + b ⏟ value when x = 0 f(x) = \underbrace{m}_{\text{change per unit of } x} \cdot\, x + \underbrace{b}_{\text{value when } x = 0} f ( x ) = change per unit of x m ​ ​ ⋅ x + value when x = 0 b ​ ​

CLEP asks these as verbal-to-symbolic translation items, so practise reading the two numbers out of the sentence.

Worked Example 3: Building and Interpreting a Linear Model

Problem: A rental company charges a flat fee of 45 dollars plus 28 cents per mile driven. Write the cost C C C as a function of miles m m m , state what each parameter means, find the cost of a 150-mile trip, and determine how many miles produce a charge of 115 dollars.

Identify the fixed amount: the 45-dollar deposit is charged regardless of distance, so it is the value at m = 0 m = 0 m = 0 — the intercept.

Identify the rate: 28 cents per mile is the change per unit of input — the slope.

Write the model: C ( m ) = 0.28 m + 45 C(m) = 0.28m + 45 C ( m ) = 0.28 m + 45

Evaluate at 150 miles: C ( 150 ) = 0.28 ( 150 ) + 45 = 42 + 45 C(150) = 0.28(150) + 45 = 42 + 45 C ( 150 ) = 0.28 ( 150 ) + 45 = 42 + 45 The cost is 87 dollars.

Solve backwards for C = 115 C = 115 C = 115 : 115 = 0.28 m + 45 ⟹ 70 = 0.28 m ⟹ m = 250 miles 115 = 0.28m + 45 \implies 70 = 0.28m \implies m = 250 \text{ miles} 115 = 0.28 m + 45 ⟹ 70 = 0.28 m ⟹ m = 250 miles

Exam Trap: "Flat fee plus a rate" always gives an intercept plus a slope. Answer choices frequently multiply the flat fee by the variable as well — C ( m ) = 45 m + 0.28 C(m) = 45m + 0.28 C ( m ) = 45 m + 0.28 or C ( m ) = 45 ( m + 0.28 ) C(m) = 45(m + 0.28) C ( m ) = 45 ( m + 0.28 ) — so check which quantity is genuinely fixed before choosing.

Recognising a Linear Relationship in a Table

  • x x x 1 3 5 7
  • y y y 11 5 − 1 -1 − 1 − 7 -7 − 7

Each step of + 2 +2 + 2 in x x x produces − 6 -6 − 6 in y y y , so the ratio − 6 2 = − 3 \frac{-6}{2} = -3 2 − 6 ​ = − 3 is constant and the relationship is linear with m = − 3 m = -3 m = − 3 . Back-solve for b b b using ( 1 , 11 ) (1, 11) ( 1 , 11 ) : 11 = − 3 ( 1 ) + b ⟹ b = 14 11 = -3(1) + b \implies b = 14 11 = − 3 ( 1 ) + b ⟹ b = 14 , giving y = − 3 x + 14 y = -3x + 14 y = − 3 x + 14 . A table whose y y y -differences are not constant for constant x x x -steps is not linear — check it before assuming.