Study guide
7.2 Unit Circle and Trigonometric Function Graphs
CLEP Precalculus Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 About the CLEP Precalculus Exam
2 Chapter 2: Algebraic Expressions, Equations, and Inequalities
2.1 Linear Equations, Inequalities, and Systems 2.2 Polynomial Expressions, Factoring, and Higher-Degree Equations 2.3 Rational and Radical Equations and Inequalities 2.4 Non-Linear Systems and Absolute Value Equations
3 Chapter 3: Functions: Concept, Properties, and Operations
3.1 Function Definition, Domain, Range, and Piecewise Functions 3.2 Function Symmetry, Extrema, and Operations 3.3 Inverse Functions and Function Transformations 3.4 Graphical and Tabular Representations of Functions 3.5 Absolute Value and Square Root Function Families
4 Chapter 4: Polynomial and Rational Functions
4.1 Linear and Quadratic Functions 4.2 Polynomial Functions of Higher Degree 4.3 Rational Functions and Asymptotes
5 Chapter 5: Exponential and Logarithmic Functions
5.1 Exponential Functions and Their Graphs 5.2 Logarithmic Functions and Properties 5.3 Exponential and Logarithmic Equations
6 Chapter 6: Analytic Geometry and Conic Sections
6.1 Coordinate Geometry: Lines, Distance, Midpoint, and Circles 6.2 Conic Sections: Parabolas, Ellipses, and Hyperbolas 6.3 Polar Coordinates and Parametric Equations
7 Chapter 7: Trigonometry and Its Applications
7.1 Angles, Radian Measure, and Right Triangle Trigonometry 7.2 Unit Circle and Trigonometric Function Graphs 7.3 Trigonometric Identities 7.4 Trigonometric Equations 7.5 Inverse Trigonometric Functions 7.6 Law of Sines, Law of Cosines, and Triangle Applications
8 Chapter 8: Functions as Mathematical Models
8.1 Linear and Polynomial Modeling 8.2 Exponential and Logarithmic Modeling 8.3 Periodic and Harmonic Motion Modeling
7.2 Unit Circle and Trigonometric Function Graphs
Key Takeaways Explain This Topic AI
On the unit circle ( x 2 + y 2 = 1 x^2 + y^2 = 1 x 2 + y 2 = 1 ), any real angle t t t defines coordinates ( x , y ) = ( cos t , sin t ) (x, y) = (\cos t, \sin t) ( x , y ) = ( cos t , sin t ) and ratio tan t = y / x \tan t = y/x tan t = y / x ( x ≠ 0 x \neq 0 x = 0 ).
Reference angles θ R \theta_R θ R map angle values from Quadrants II, III, and IV back to Quadrant I, with signs determined by the ASTC rule.
Sine and cosine functions are periodic with period 2 π 2\pi 2 π , while tangent and cotangent have a fundamental period of π \pi π .
For transformed sine/cosine functions y = A sin ( B x − C ) + D y = A\sin(Bx - C) + D y = A sin ( B x − C ) + D , the amplitude is ∣ A ∣ |A| ∣ A ∣ , period is 2 π ∣ B ∣ \frac{2\pi}{|B|} ∣ B ∣ 2 π , phase shift is C B \frac{C}{B} B C , and vertical shift is D D D .
Vertical asymptotes occur where trigonometric functions are undefined, such as x = π 2 + k π x = \frac{\pi}{2} + k\pi x = 2 π + kπ for tan x \tan x tan x and sec x \sec x sec x , and x = k π x = k\pi x = kπ for cot x \cot x cot x and csc x \csc x csc x .
Last updated: August 2026
7.2 Unit Circle and Trigonometric Function Graphs
Extending trigonometric functions beyond acute right-triangle angles requires the concept of the unit circle . By defining trigonometric ratios as coordinates on a circle of radius 1 1 1 , trigonometry expands to all real numbers, giving rise to continuous, periodic functions.
1. The Unit Circle and Quadrant Signs
The unit circle is centered at the origin ( 0 , 0 ) (0,0) ( 0 , 0 ) in the Cartesian plane with a radius of r = 1 r = 1 r = 1 . Its algebraic equation is: x 2 + y 2 = 1 x^2 + y^2 = 1 x 2 + y 2 = 1
If a real number t t t represents the directed arc length along the unit circle from ( 1 , 0 ) (1,0) ( 1 , 0 ) (which corresponds to a central angle of t t t radians), the terminal point P ( x , y ) P(x,y) P ( x , y ) on the unit circle defines all six trigonometric functions: cos t = x sec t = 1 x ( x ≠ 0 ) sin t = y csc t = 1 y ( y ≠ 0 ) tan t = y x ( x ≠ 0 ) cot t = x y ( y ≠ 0 ) \begin{aligned}
- \cos t &= x \quad & \sec t &= \frac{1}{x} \quad (x \neq 0) \\
- \sin t &= y \quad & \csc t &= \frac{1}{y} \quad (y \neq 0) \\
- \tan t &= \frac{y}{x} \quad (x \neq 0) \quad & \cot t &= \frac{x}{y} \quad (y \neq 0)
\end{aligned} cos t sin t tan t = x = y = x y ( x = 0 ) sec t csc t cot t = x 1 ( x = 0 ) = y 1 ( y = 0 ) = y x ( y = 0 )
Quadrant Signs (ASTC Rule)
The algebraic sign ( + + + or − - − ) of each function depends entirely on the quadrant in which the terminal point P ( x , y ) P(x,y) P ( x , y ) lies. The acronym ASTC ("All Students Take Calculus") summarizes positive functions:
Quadrant I ( 0 < t < π 2 0 < t < \frac{\pi}{2} 0 < t < 2 π ): A ll functions are positive ( x > 0 , y > 0 x > 0, y > 0 x > 0 , y > 0 ).
Quadrant II ( π 2 < t < π \frac{\pi}{2} < t < \pi 2 π < t < π ): S ine and cosecant are positive ( x < 0 , y > 0 x < 0, y > 0 x < 0 , y > 0 ).
Quadrant III ( π < t < 3 π 2 \pi < t < \frac{3\pi}{2} π < t < 2 3 π ): T angent and cotangent are positive ( x < 0 , y < 0 x < 0, y < 0 x < 0 , y < 0 ).
Quadrant IV ( 3 π 2 < t < 2 π \frac{3\pi}{2} < t < 2\pi 2 3 π < t < 2 π ): C osine and secant are positive ( x > 0 , y < 0 x > 0, y < 0 x > 0 , y < 0 ).
Reference Angles
For any non-quadrantal angle θ \theta θ , its reference angle θ R \theta_R θ R (or θ ′ \theta' θ ′ ) is the acute angle formed between the terminal side of θ \theta θ and the x-axis :
Quadrant II : θ R = π − θ ( 180 ∘ − θ ) \theta_R = \pi - \theta \quad (180^\circ - \theta) θ R = π − θ ( 18 0 ∘ − θ )
Quadrant III : θ R = θ − π ( θ − 180 ∘ ) \theta_R = \theta - \pi \quad (\theta - 180^\circ) θ R = θ − π ( θ − 18 0 ∘ )
Quadrant IV : θ R = 2 π − θ ( 360 ∘ − θ ) \theta_R = 2\pi - \theta \quad (360^\circ - \theta) θ R = 2 π − θ ( 36 0 ∘ − θ )
To evaluate Trig ( θ ) \text{Trig}(\theta) Trig ( θ ) , determine the sign using the ASTC rule for θ \theta θ 's quadrant and evaluate Trig ( θ R ) \text{Trig}(\theta_R) Trig ( θ R ) .
Worked Example 1: Evaluating Unit Circle Angles
Evaluate the exact value of sin ( 7 π 6 ) + cos ( 4 π 3 ) \sin\left(\frac{7\pi}{6}\right) + \cos\left(\frac{4\pi}{3}\right) sin ( 6 7 π ) + cos ( 3 4 π ) .
Solution :
For 7 π 6 \frac{7\pi}{6} 6 7 π :
Lies in Quadrant III ( π < 7 π 6 < 3 π 2 \pi < \frac{7\pi}{6} < \frac{3\pi}{2} π < 6 7 π < 2 3 π ). Sine is negative in QIII.
Reference angle: θ R = 7 π 6 − π = π 6 \theta_R = \frac{7\pi}{6} - \pi = \frac{\pi}{6} θ R = 6 7 π − π = 6 π .
Value: sin ( 7 π 6 ) = − sin ( π 6 ) = − 1 2 \sin\left(\frac{7\pi}{6}\right) = -\sin\left(\frac{\pi}{6}\right) = -\frac{1}{2} sin ( 6 7 π ) = − sin ( 6 π ) = − 2 1 .
For 4 π 3 \frac{4\pi}{3} 3 4 π :
Lies in Quadrant III ( π < 4 π 3 < 3 π 2 \pi < \frac{4\pi}{3} < \frac{3\pi}{2} π < 3 4 π < 2 3 π ). Cosine is negative in QIII.
Reference angle: θ R = 4 π 3 − π = π 3 \theta_R = \frac{4\pi}{3} - \pi = \frac{\pi}{3} θ R = 3 4 π − π = 3 π .
Value: cos ( 4 π 3 ) = − cos ( π 3 ) = − 1 2 \cos\left(\frac{4\pi}{3}\right) = -\cos\left(\frac{\pi}{3}\right) = -\frac{1}{2} cos ( 3 4 π ) = − cos ( 3 π ) = − 2 1 .
Combine results: sin ( 7 π 6 ) + cos ( 4 π 3 ) = − 1 2 + ( − 1 2 ) = − 1 \sin\left(\frac{7\pi}{6}\right) + \cos\left(\frac{4\pi}{3}\right) = -\frac{1}{2} + \left(-\frac{1}{2}\right) = -1 sin ( 6 7 π ) + cos ( 3 4 π ) = − 2 1 + ( − 2 1 ) = − 1
2. Domain, Range, Periodicity, and Symmetry
The structural properties of the trigonometric functions are summarized below:
Function Domain Range Fundamental Period Symmetry (Even/Odd)
y = sin x y = \sin x y = sin x ( − ∞ , ∞ ) (-\infty, \infty) ( − ∞ , ∞ ) [ − 1 , 1 ] [-1, 1] [ − 1 , 1 ] 2 π 2\pi 2 π Odd: sin ( − x ) = − sin x \sin(-x) = -\sin x sin ( − x ) = − sin x
y = cos x y = \cos x y = cos x ( − ∞ , ∞ ) (-\infty, \infty) ( − ∞ , ∞ ) [ − 1 , 1 ] [-1, 1] [ − 1 , 1 ] 2 π 2\pi 2 π Even: cos ( − x ) = cos x \cos(-x) = \cos x cos ( − x ) = cos x
y = tan x y = \tan x y = tan x x ≠ π 2 + k π x \neq \frac{\pi}{2} + k\pi x = 2 π + kπ ( − ∞ , ∞ ) (-\infty, \infty) ( − ∞ , ∞ ) π \pi π Odd: tan ( − x ) = − tan x \tan(-x) = -\tan x tan ( − x ) = − tan x
y = csc x y = \csc x y = csc x x ≠ k π x \neq k\pi x = kπ ( − ∞ , − 1 ] ∪ [ 1 , ∞ ) (-\infty, -1] \cup [1, \infty) ( − ∞ , − 1 ] ∪ [ 1 , ∞ ) 2 π 2\pi 2 π Odd: csc ( − x ) = − csc x \csc(-x) = -\csc x csc ( − x ) = − csc x
y = sec x y = \sec x y = sec x x ≠ π 2 + k π x \neq \frac{\pi}{2} + k\pi x = 2 π + kπ ( − ∞ , − 1 ] ∪ [ 1 , ∞ ) (-\infty, -1] \cup [1, \infty) ( − ∞ , − 1 ] ∪ [ 1 , ∞ ) 2 π 2\pi 2 π Even: sec ( − x ) = sec x \sec(-x) = \sec x sec ( − x ) = sec x
y = cot x y = \cot x y = cot x x ≠ k π x \neq k\pi x = kπ ( − ∞ , ∞ ) (-\infty, \infty) ( − ∞ , ∞ ) π \pi π Odd: cot ( − x ) = − cot x \cot(-x) = -\cot x cot ( − x ) = − cot x
3. Transformations of Sine and Cosine Graphs
General sinusoidal functions are modeled by: y = A sin ( B x − C ) + D or y = A cos ( B x − C ) + D y = A \sin(Bx - C) + D \quad \text{or} \quad y = A \cos(Bx - C) + D y = A sin ( B x − C ) + D or y = A cos ( B x − C ) + D
To analyze graph parameters, rewrite in factored standard form: y = A sin [ B ( x − C B ) ] + D y = A \sin\left[B\left(x - \frac{C}{B}\right)\right] + D y = A sin [ B ( x − B C ) ] + D .
Amplitude : ∣ A ∣ |A| ∣ A ∣ — Half the vertical distance between maximum and minimum values.
Period : P = 2 π ∣ B ∣ P = \frac{2\pi}{|B|} P = ∣ B ∣ 2 π — Length of one complete cycle along the x-axis.
Phase Shift : C B \frac{C}{B} B C — Horizontal shift (right if C B > 0 \frac{C}{B} > 0 B C > 0 , left if C B < 0 \frac{C}{B} < 0 B C < 0 ).
Vertical Shift : D D D — Shifts the midline to y = D y = D y = D .
Range : [ D − ∣ A ∣ , D + ∣ A ∣ ] [D - |A|, D + |A|] [ D − ∣ A ∣ , D + ∣ A ∣ ] .
Worked Example 2: Analyzing a Transformed Cosine Function
For the function f ( x ) = − 3 cos ( 4 x − π ) + 2 f(x) = -3\cos(4x - \pi) + 2 f ( x ) = − 3 cos ( 4 x − π ) + 2 :
State the amplitude, period, phase shift, and vertical shift.
Determine the maximum and minimum values and the range.
Solution :
Factor out B = 4 B = 4 B = 4 : f ( x ) = − 3 cos [ 4 ( x − π 4 ) ] + 2 f(x) = -3\cos\left[4\left(x - \frac{\pi}{4}\right)\right] + 2 f ( x ) = − 3 cos [ 4 ( x − 4 π ) ] + 2
Amplitude : ∣ A ∣ = ∣ − 3 ∣ = 3 |A| = |-3| = 3 ∣ A ∣ = ∣ − 3∣ = 3 .
Period : P = 2 π B = 2 π 4 = π 2 P = \frac{2\pi}{B} = \frac{2\pi}{4} = \frac{\pi}{2} P = B 2 π = 4 2 π = 2 π .
Phase Shift : C B = π 4 \frac{C}{B} = \frac{\pi}{4} B C = 4 π units to the right.
Vertical Shift : D = 2 D = 2 D = 2 (midline at y = 2 y = 2 y = 2 ).
Range calculations:
Maximum value: D + ∣ A ∣ = 2 + 3 = 5 D + |A| = 2 + 3 = 5 D + ∣ A ∣ = 2 + 3 = 5 .
Minimum value: D − ∣ A ∣ = 2 − 3 = − 1 D - |A| = 2 - 3 = -1 D − ∣ A ∣ = 2 − 3 = − 1 .
Range : [ − 1 , 5 ] [-1, 5] [ − 1 , 5 ] .
4. Graphs of Tangent, Secant, Cosecant, and Cotangent
Unlike sine and cosine, the remaining four trigonometric functions contain division by variables that periodically equal zero, creating vertical asymptotes.
Tangent and Cotangent Graphs
y = tan x y = \tan x y = tan x : Period is π \pi π . Vertical asymptotes occur at x = π 2 + k π x = \frac{\pi}{2} + k\pi x = 2 π + kπ . Has x-intercepts at x = k π x = k\pi x = kπ . Increases continuously between adjacent asymptotes.
y = cot x y = \cot x y = cot x : Period is π \pi π . Vertical asymptotes occur at x = k π x = k\pi x = kπ . Has x-intercepts at x = π 2 + k π x = \frac{\pi}{2} + k\pi x = 2 π + kπ . Decreases continuously between adjacent asymptotes.
Secant and Cosecant Graphs
Secant and cosecant graphs are constructed using their reciprocal guide curves ( y = cos x y = \cos x y = cos x and y = sin x y = \sin x y = sin x ):
Local maxima of cosine/sine become local minima for secant/cosecant.
Zero-crossings of cosine/sine become vertical asymptotes for secant/cosecant.
Worked Example 3: Finding Vertical Asymptotes
Find all vertical asymptotes of g ( x ) = tan ( 2 x ) g(x) = \tan(2x) g ( x ) = tan ( 2 x ) .
Solution :
The standard tangent function tan ( θ ) \tan(\theta) tan ( θ ) has vertical asymptotes where its argument θ = π 2 + k π \theta = \frac{\pi}{2} + k\pi θ = 2 π + kπ for k ∈ Z k \in \mathbb{Z} k ∈ Z .
Set the inner argument 2 x 2x 2 x equal to π 2 + k π \frac{\pi}{2} + k\pi 2 π + kπ : 2 x = π 2 + k π 2x = \frac{\pi}{2} + k\pi 2 x = 2 π + kπ
Divide by 2 2 2 : x = π 4 + k π 2 ( k ∈ Z ) x = \frac{\pi}{4} + \frac{k\pi}{2} \quad (k \in \mathbb{Z}) x = 4 π + 2 kπ ( k ∈ Z )
- 5. CLEP Exam Traps & Common Errors
- Trap 1: Period Calculation for Tangent and Cotangent
Applying 2 π B \frac{2\pi}{B} B 2 π to tangent or cotangent functions instead of π B \frac{\pi}{B} B π is a frequent error. Sine, cosine, secant, and cosecant have base period 2 π 2\pi 2 π , whereas tangent and cotangent have base period π \pi π .
Trap 2: Unfactored Phase Shift
Reading the phase shift from y = A sin ( B x − C ) y = A\sin(Bx - C) y = A sin ( B x − C ) directly as C C C instead of C B \frac{C}{B} B C . You must factor out B B B first!
Trap 3: Reference Angle to the Y-Axis
Reference angles MUST be measured relative to the horizontal x-axis , never the vertical y-axis.