Study guide

Surfactant Cleaners, Protein Removers & Weekly Cleaning

NCLE CLRE Contact Lens Registry Exam Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 About the CLRE Exam 0.2 How to Use This Study Guide

2 Ocular Anatomy: Adnexa

Tear Film: Layers, Glands & Break-Up Time Conjunctiva, Lids, Lashes, Fornix & Canthi Blink Rate, Lid Function & Contact Lens Wear Effects

3 Ocular Anatomy: Anterior & Posterior Segment

Corneal Layers, Curvature, Topography & Metabolism Iris, Pupil, Sclera & Anterior Chamber Crystalline Lens, Retina, Choroid & Posterior Chamber

4 Refractive Errors & Contact Lens Optics

Myopia, Hyperopia, Astigmatism, Presbyopia & Anisometropia Refraction, Prism, Lacrimal Lens, Accommodation & Transposition Vertex Distance, Sagittal Depth & Spherical Equivalent

5 Measurement Instrumentation

Keratometer/Ophthalmometer: Calibration, Readings & Interpretation Corneal Topography & OCT for Contact Lens Fitting Schirmer Tests & Tear Break-Up Time

6 Observation & Verification Instrumentation

Slit Lamp (Biomicroscope) Operation & Illumination Slit Lamp Evaluation With & Without Contact Lenses Radiuscope, Lensometer, Thickness Gauge & ANSI Z80

7 Prefitting Patient Evaluation

6.1 Lifestyle, Occupation, Environment & Motivation 6.2 Medical History, Diseases, Medications & Allergies 6.3 Contraindications & Factors for Successful Wear 6.4 Relating Corneal Measurements, Rx & Lens Parameters

8 Lens Materials, Design & Parameter Selection

Dk, Dk/t, Thermal Conductivity & Holden-Mertz Water Content, Wetting Angle, Modulus, Silicone Hydrogel & Surface Treatments Toric, Multifocal, Aspheric, Hybrid, Scleral, Orthokeratology & Quadrant-Specific Base Curve, Peripheral Curves, Diameter, Thickness, Power & Edge Design

9 Diagnostic Fitting Procedures

8.1 Lens Selection & Application Procedures 8.2 Fluorescein Pattern Evaluation for RGP Lenses 8.3 Soft Lens Movement, Centration & Coverage

10 Fit Evaluation & Over-Refraction

Toric Lens Axis Rotation, LARS Rule & Stabilization Patient Comfort, Visual Acuity & Over-Refraction Modifying Base Curve, Diameter, Sag & Power from Findings

11 Dispensing: Wearing Schedules & Replacement

Daily, Flexible & Extended/Continuous Wear Schedules Daily, Biweekly, Monthly & Conventional Replacement Adaptation Protocols & Patient Compliance Counseling

12 Dispensing: Lens Care Systems

Solution Compatibility with Lens Types Chemical, Heat/UV, Hydrogen Peroxide & Neutralization Surfactant Cleaners, Protein Removers & Weekly Cleaning Solution Sensitivities, Incompatibilities & Adverse Reactions

13 Dispensing: Handling & Hygiene

12.1 Soft Lens Insertion & Removal Techniques 12.2 RGP Insertion, Removal & Emergency Responses 12.3 Hygiene, Soaps, Cosmetics & Storage Containers 12.4 Verifying Lens Parameters Against the Order at Dispensing

14 Follow-Up: Subjective & Objective Findings

13.1 Subjective Complaints: Dryness, Awareness, Blurry Vision, Pain & Photophobia 13.2 Steep vs Flat Lens Fit (Rigid & Soft) & Everted Lens 13.3 Injection, Edema, Discharge, Vision Loss & Lid Problems 13.4 Visual Acuity, Over-Refraction & Gross Evaluation Techniques

15 Follow-Up: Staining Patterns & Complications

14.1 Staining Patterns: 3 & 9 O'Clock, Foreign Body, SPK, Arcuate, Smile & Dimple Veiling 14.2 SEAL, CLARE, VLK, SLK & CLPU 14.3 Microbial Keratitis, Acanthamoeba, Dendritic Ulcer & Infiltrates 14.4 Corneal Molding/Warpage, Dellen & Mucin Balls

16 Follow-Up: Management Protocols

GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols Changing Lens Parameters at Follow-Up & Documenting Records

17 Regulatory & Administrative

FCLCA, FDA, FTC, Contact Lens Rule & Prescriber Verification HIPAA, PHI, OSHA, CDC, ANSI & Universal Precautions Record Retention, Inventory, Ordering & Documentation Methodology

Surfactant Cleaners, Protein Removers & Weekly Cleaning

Key Takeaways Explain This Topic AI

Surfactant daily cleaners remove lipid, mucus, and debris by rubbing the lens 20–30 seconds on each side followed by a saline rinse

Enzymatic protein removers (subtilisin, papain) are typically weekly tablets dissolved in saline, used for conventional and quarterly replacement soft lenses

Daily disposable lenses require no cleaners, no disinfection, and no storage solutions—this is the lowest-infection-risk modality

The FDA and CDC recommend a rub-and-rinse step for all contact lenses regardless of "no-rub" labeling, following the 2006 Fusarium outbreak linked to ReNu with MoistureLoc

Deposit formation (protein, lipid, calcium) accelerates with tear film quality, environmental exposure, and lens replacement schedule; weekly enzymatic cleaning is most relevant for conventional and quarterly soft lens wearers

Last updated: July 2026

Surfactant Cleaners, Protein Removers & Weekly Cleaning

Quick Answer: Surfactant daily cleaners remove lipid, mucus, and debris by rubbing the lens 20–30 seconds on each side and rinsing with saline. Enzymatic protein removers (subtilisin, papain) are weekly tablets dissolved in saline, used primarily for conventional and quarterly replacement soft lenses. Daily disposable lenses need no cleaners at all. After the 2006 Fusarium outbreak, the FDA recommends rub-and-rinse for all lenses , even those labeled "no-rub."

Surfactant Daily Cleaners

Surfactant cleaners lower the surface tension of the tear film contaminants on the lens, allowing lipid, mucus, and environmental debris to be lifted off the surface and rinsed away. They are applied by placing a few drops on the lens and rubbing with a clean finger.

  • Rub Technique
  • Wash and dry hands thoroughly
  • Place lens in palm of hand
  • Apply 2–3 drops of daily cleaner
  • Rub lens 20–30 seconds on each side using a back-and-forth motion (not circular, which can tear soft lenses)
  • Rinse thoroughly with sterile saline
  • Soak overnight in disinfecting solution

Surfactant cleaners do not disinfect—they clean only. A separate disinfection step is mandatory. Modern MPS formulations combine cleaning and disinfection in one bottle, but the rub step remains the gold standard for mechanical cleaning.

Protein Removers (Enzymatic Cleaners)

Tear film proteins (lysozyme, lactoferrin, albumin) deposit on contact lens surfaces over time. Soft hydrogel lenses, particularly ionic high-water materials, attract protein heavily. Enzymatic cleaners break down protein deposits that surfactant cleaning cannot remove.

  • Active Agents
  • Subtilisin — bacterial protease, the most common enzymatic cleaner in tablet form
  • Papain — plant-derived protease (papaya), used in some older formulations
  • Weekly Regimen

For conventional (annual) and quarterly replacement soft lenses:

After routine cleaning and disinfection, drop one enzymatic tablet into the lens case with each lens

Soak for the period specified by the manufacturer (typically 15 minutes to 2 hours, or overnight depending on formulation)

  • Rinse thoroughly with saline
  • Disinfect again before insertion (peroxide-based enzymatic cleaners may require a fresh disinfection cycle)

Enzymatic cleaning is typically not needed for:

  • Daily disposable lenses (discard daily)
  • Two-week and monthly silicone hydrogel lenses (deposits are removed at disposal)
  • Most frequent-replacement regimens unless heavy depositors

For RGP lenses, protein deposits are less common but still occur; RGP-specific enzymatic tablets are available.

Daily Disposable Lenses: No Cleaners Needed

Daily disposable lenses represent the lowest infection risk of any soft lens modality because they eliminate the care system entirely. The patient discards the lens at the end of the day and inserts a fresh sterile lens the next morning. There is no need for:

  • Daily cleaner
  • MPS
  • Hydrogen peroxide
  • Enzymatic tablets
  • Lens cases

For patients with recurrent solution sensitivity, heavy depositors, or compliance concerns, switching to daily disposable lenses is often the most clinically effective solution —eliminating the care system eliminates care-system complications.

Rub & Rinse: Why It Still Matters

In the early 2000s, several MPS products were marketed as "no-rub" solutions, promising disinfection without a mechanical cleaning step. After the 2006 Fusarium outbreak linked to ReNu with MoistureLoc (Bausch & Lomb), the FDA, CDC, and American Optometric Association revised their guidance:

  • The FDA now recommends rub-and-rinse for all contact lenses regardless of no-rub labeling
  • The mechanical rubbing step removes biofilm and deposits that no-rub soaking alone cannot
  • "No-rub" labels were removed from most U.S. MPS products after 2006

Patients who skip the rub step are at higher risk of:

  • Microbial keratitis (bacterial and fungal)
  • Heavy deposit buildup
  • Reduced lens surface wettability
  • Shorter comfortable wearing time
  • Deposit Formation and Removal

Three main deposit types form on CL surfaces:

  • Deposit Type Source Removal Method
  • Protein Tear film lysozyme, lactoferrin Enzymatic cleaner (subtilisin/papain)
  • Lipid Meibomian secretions, cosmetics Surfactant daily cleaner
  • Inorganic (calcium, phosphate) Tears, environmental Acid-based cleaners (RGP); lens replacement for soft

Signs of deposit buildup at follow-up:

  • Reduced visual acuity with the lens on
  • Increased awareness, dryness, discomfort
  • Visible film or spots on slit-lamp inspection
  • fluorescein staining in deposit distribution patterns
  • Infiltrates or immune reactions to deposits
  • Weekly Cleaning Schedule

For conventional and quarterly soft lens wearers, the recommended weekly schedule is:

  • Daily: surfactant clean (rub 20–30 sec) → rinse → disinfect overnight
  • Weekly: enzymatic cleaner tablet added to overnight soak → rinse → disinfect before insertion

For frequent replacement (2-week, monthly) patients, enzymatic cleaning is rarely required if the daily rub-and-rinse is performed consistently. The lens is replaced before deposits accumulate to a clinically significant level.

For daily disposable wearers, no cleaning is required—dispose and replace.

Special Considerations for RGP Lenses

RGP lenses accumulate deposits differently than soft lenses. Because RGP materials are rigid and non-hydrophilic (with the exception of surface wetting treatments), protein binds less aggressively but lipid and inorganic deposits still form. Weekly enzymatic cleaning is generally not required for RGP lenses unless the patient is a heavy depositor. The daily regimen for RGP emphasizes:

  • Surfactant cleaning with an RGP-specific daily cleaner (rub 20–30 seconds)
  • Rinsing with saline or RGP rinsing solution
  • Wetting before insertion with RGP wetting solution to improve surface wettability and cushioning
  • Soaking in RGP soaking solution overnight to maintain parameter stability

RGP lenses should never be cleaned with soft-lens daily cleaner or allowed to dry out, because surface crazing and parameter shift can occur.

Counseling Points for Compliance

Patient non-compliance with cleaning regimens is the leading driver of deposit-related complications. Key counseling messages at dispensing include:

  • Rub-and-rinse is not optional , even when the bottle says "no-rub"
  • Replace the lens case every 3 months at minimum; sooner if it appears cloudy or cracked
  • Never top off solution — discard and refill the case completely each day

Use only the recommended solution — switching solutions without consulting the fitter can cause SICS, sensitivity, or parameter changes

Daily disposable wearers should never reuse a lens — reinsertion defeats the infection-prevention benefit of the modality