Study guide

12.3 Hygiene, Soaps, Cosmetics & Storage Containers

NCLE CLRE Contact Lens Registry Exam Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 About the CLRE Exam 0.2 How to Use This Study Guide

2 Ocular Anatomy: Adnexa

Tear Film: Layers, Glands & Break-Up Time Conjunctiva, Lids, Lashes, Fornix & Canthi Blink Rate, Lid Function & Contact Lens Wear Effects

3 Ocular Anatomy: Anterior & Posterior Segment

Corneal Layers, Curvature, Topography & Metabolism Iris, Pupil, Sclera & Anterior Chamber Crystalline Lens, Retina, Choroid & Posterior Chamber

4 Refractive Errors & Contact Lens Optics

Myopia, Hyperopia, Astigmatism, Presbyopia & Anisometropia Refraction, Prism, Lacrimal Lens, Accommodation & Transposition Vertex Distance, Sagittal Depth & Spherical Equivalent

5 Measurement Instrumentation

Keratometer/Ophthalmometer: Calibration, Readings & Interpretation Corneal Topography & OCT for Contact Lens Fitting Schirmer Tests & Tear Break-Up Time

6 Observation & Verification Instrumentation

Slit Lamp (Biomicroscope) Operation & Illumination Slit Lamp Evaluation With & Without Contact Lenses Radiuscope, Lensometer, Thickness Gauge & ANSI Z80

7 Prefitting Patient Evaluation

6.1 Lifestyle, Occupation, Environment & Motivation 6.2 Medical History, Diseases, Medications & Allergies 6.3 Contraindications & Factors for Successful Wear 6.4 Relating Corneal Measurements, Rx & Lens Parameters

8 Lens Materials, Design & Parameter Selection

Dk, Dk/t, Thermal Conductivity & Holden-Mertz Water Content, Wetting Angle, Modulus, Silicone Hydrogel & Surface Treatments Toric, Multifocal, Aspheric, Hybrid, Scleral, Orthokeratology & Quadrant-Specific Base Curve, Peripheral Curves, Diameter, Thickness, Power & Edge Design

9 Diagnostic Fitting Procedures

8.1 Lens Selection & Application Procedures 8.2 Fluorescein Pattern Evaluation for RGP Lenses 8.3 Soft Lens Movement, Centration & Coverage

10 Fit Evaluation & Over-Refraction

Toric Lens Axis Rotation, LARS Rule & Stabilization Patient Comfort, Visual Acuity & Over-Refraction Modifying Base Curve, Diameter, Sag & Power from Findings

11 Dispensing: Wearing Schedules & Replacement

Daily, Flexible & Extended/Continuous Wear Schedules Daily, Biweekly, Monthly & Conventional Replacement Adaptation Protocols & Patient Compliance Counseling

12 Dispensing: Lens Care Systems

Solution Compatibility with Lens Types Chemical, Heat/UV, Hydrogen Peroxide & Neutralization Surfactant Cleaners, Protein Removers & Weekly Cleaning Solution Sensitivities, Incompatibilities & Adverse Reactions

13 Dispensing: Handling & Hygiene

12.1 Soft Lens Insertion & Removal Techniques 12.2 RGP Insertion, Removal & Emergency Responses 12.3 Hygiene, Soaps, Cosmetics & Storage Containers 12.4 Verifying Lens Parameters Against the Order at Dispensing

14 Follow-Up: Subjective & Objective Findings

13.1 Subjective Complaints: Dryness, Awareness, Blurry Vision, Pain & Photophobia 13.2 Steep vs Flat Lens Fit (Rigid & Soft) & Everted Lens 13.3 Injection, Edema, Discharge, Vision Loss & Lid Problems 13.4 Visual Acuity, Over-Refraction & Gross Evaluation Techniques

15 Follow-Up: Staining Patterns & Complications

14.1 Staining Patterns: 3 & 9 O'Clock, Foreign Body, SPK, Arcuate, Smile & Dimple Veiling 14.2 SEAL, CLARE, VLK, SLK & CLPU 14.3 Microbial Keratitis, Acanthamoeba, Dendritic Ulcer & Infiltrates 14.4 Corneal Molding/Warpage, Dellen & Mucin Balls

16 Follow-Up: Management Protocols

GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols Changing Lens Parameters at Follow-Up & Documenting Records

17 Regulatory & Administrative

FCLCA, FDA, FTC, Contact Lens Rule & Prescriber Verification HIPAA, PHI, OSHA, CDC, ANSI & Universal Precautions Record Retention, Inventory, Ordering & Documentation Methodology

12.3 Hygiene, Soaps, Cosmetics & Storage Containers

Key Takeaways Explain This Topic AI

Wash hands with non-cream soap and dry with a lint-free towel before handling lenses; lotions and creams transfer to the lens and cause deposits and fogging

Insert lenses BEFORE applying makeup and remove lenses BEFORE removing makeup; use hypoallergenic, water-based cosmetics and avoid waterproof mascara

Avoid antibacterial, deodorant, heavily fragranced, and lotion-based soaps; residues adhere to hydrogel and silicone hydrogel materials

Replace the lens case every 3 months, air-dry it open, and never top off or reuse solution

Apply eye makeup outside the lash line only — inner-rim application risks contamination and meibomian gland damage

Last updated: July 2026

Hygiene, Soaps, Cosmetics & Storage Containers

Quick Answer: Wash hands with non-cream soap and a lint-free towel; insert lenses before makeup and remove them before makeup removal; use hypoallergenic water-based cosmetics and avoid waterproof mascara; replace the lens case every 3 months, air-dry it open, and never top off solution.

Hygiene failures are the leading cause of contact lens-induced complications including microbial keratitis, giant papillary conjunctivitis, and deposit-driven discomfort. The CLRE expects you to know the specific rules, not generic advice.

  • Hand Hygiene
  • Proper Hand Washing Steps

Wet hands with warm water.

Apply non-cream soap — work into a lather up to the wrists.

Rinse thoroughly — soap residue on the finger pad transfers directly onto the lens surface.

Dry with a lint-free towel — paper towels and terrycloth shed fibers.

Avoid touching non-clean surfaces (faucets, door handles) before handling the lens.

Soaps to Avoid

  • Soap Type Why It Is a Problem
  • Antibacterial Triclosan and similar agents bind to lens materials
  • Deodorant Adds fragrances and antimicrobials that deposit on lenses
  • Heavily fragranced Oils and fixatives cause fogging and deposits
  • Lotion-based / cream Emollients coat the lens, smearing optics

Acceptable options: plain bar soap, mild liquid dish soap diluted, or ophthalmic-grade hand washes.

  • Cosmetics Rules
  • Insertion/Removal Sequencing

Step Order Rule Rationale

Insert lenses BEFORE makeup Apply lenses first, then cosmetics Prevents makeup transfer to the lens from fingers

Remove lenses BEFORE makeup removal Take lenses out, then remove makeup Avoids contaminating the lens with makeup remover oils

Cosmetics Selection

Hypoallergenic, water-based cosmetics are preferred.

Avoid waterproof mascara — typically oil-based, difficult to remove, and splashes during removal can stain or deposit on lenses.

Avoid fiber or lengthening mascaras — fibers shed into the tear film and adhere to the lens.

Powdered eye shadow is preferable to cream — fewer migrating particles.

Eye pencils should be sharpened regularly.

Application Boundaries

Eye makeup must be applied outside the lash line , never on the inner rim (waterline) :

Inner-rim application risks contamination of the tear film and lens.

It can obstruct or infect the meibomian gland orifices , worsening dry eye — a common lens-wear complicator.

For the same reason, eyeliner should not be applied at the lid margin — keep it on the skin above the lash roots.

Hairspray and Aerosols

Apply hairspray before inserting lenses , or have the patient close their eyes and leave the room during application.

Aerosol droplets adhere strongly to lens surfaces and cause coating that no cleaning solution fully removes.

  • Lens Case Hygiene
  • Replacement Schedule

Replace the lens case every 3 months — sooner if visibly soiled or cracked.

Cases develop biofilm within weeks; routine cleaning does not fully remove established biofilm.

Manufacturer-provided cases often include a replacement reminder sticker.

Daily Case Care

Empty the old solution from both wells (never top off).

Rub the inside of each well with a clean finger.

Rinse with fresh multipurpose solution (never water).

Air-dry open — capping a wet case traps moisture and accelerates biofilm growth.

Store the dry case open or with the caps off between uses.

Critical Prohibitions

  • Never Do This Why
  • Top off solution Reused solution is contaminated with biofilm and tear debris
  • Use tap water Contains Acanthamoeba and other pathogens; risk of microbial keratitis
  • Cap a wet case Biofilm proliferation
  • Share cases Cross-contamination
  • Use a case past 3 months Biofilm and cracks harbor bacteria
  • Storage Environment and Travel

Where the case lives matters as much as how it is cleaned. The case should be stored in a clean, dry, well-ventilated location — never in a humid bathroom where airborne moisture feeds biofilm, and never in a sealed bag or container that traps humidity. Travel kits should include a small bottle of fresh solution (never decanted into an unlabeled bottle), a spare case, and non-cream soap wipes; patients should never transfer solution into contact-lens-unapproved containers because preservative concentration and sterility cannot be guaranteed. Heat exposure (a car glove compartment in summer) warps soft lenses and degrades solution preservatives, so advise patients to carry lenses in an insulated bag. Finally, diagnostic lenses kept in the office must be stored in dedicated disinfecting solution and rotated per the manufacturer's expiration date — never used past expiration even if the lens looks clear.

Patient Education Summary

A helpful patient-facing checklist:

Wash hands with plain soap , dry with lint-free towel .

Insert lenses before makeup.

Use hypoallergenic, water-based cosmetics.

Apply makeup outside the lash line .

Apply hairspray before lenses, or close eyes.

Remove lenses before makeup removal.

Empty, rub, rinse, air-dry the case daily.

Replace the case every 3 months .

Never top off solution; never use water .

Key Takeaways

Plain, non-cream soap and lint-free towels are mandatory.

Insert before makeup; remove before makeup removal.

Use hypoallergenic water-based cosmetics; avoid waterproof mascara .

Apply eye makeup outside the lash line to protect meibomian glands.

Replace the lens case every 3 months ; air-dry open; never top off solution.