Study guide
Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols
NCLE CLRE Contact Lens Registry Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 About the CLRE Exam 0.2 How to Use This Study Guide
2 Ocular Anatomy: Adnexa
Tear Film: Layers, Glands & Break-Up Time Conjunctiva, Lids, Lashes, Fornix & Canthi Blink Rate, Lid Function & Contact Lens Wear Effects
3 Ocular Anatomy: Anterior & Posterior Segment
Corneal Layers, Curvature, Topography & Metabolism Iris, Pupil, Sclera & Anterior Chamber Crystalline Lens, Retina, Choroid & Posterior Chamber
4 Refractive Errors & Contact Lens Optics
Myopia, Hyperopia, Astigmatism, Presbyopia & Anisometropia Refraction, Prism, Lacrimal Lens, Accommodation & Transposition Vertex Distance, Sagittal Depth & Spherical Equivalent
5 Measurement Instrumentation
Keratometer/Ophthalmometer: Calibration, Readings & Interpretation Corneal Topography & OCT for Contact Lens Fitting Schirmer Tests & Tear Break-Up Time
6 Observation & Verification Instrumentation
Slit Lamp (Biomicroscope) Operation & Illumination Slit Lamp Evaluation With & Without Contact Lenses Radiuscope, Lensometer, Thickness Gauge & ANSI Z80
7 Prefitting Patient Evaluation
6.1 Lifestyle, Occupation, Environment & Motivation 6.2 Medical History, Diseases, Medications & Allergies 6.3 Contraindications & Factors for Successful Wear 6.4 Relating Corneal Measurements, Rx & Lens Parameters
8 Lens Materials, Design & Parameter Selection
Dk, Dk/t, Thermal Conductivity & Holden-Mertz Water Content, Wetting Angle, Modulus, Silicone Hydrogel & Surface Treatments Toric, Multifocal, Aspheric, Hybrid, Scleral, Orthokeratology & Quadrant-Specific Base Curve, Peripheral Curves, Diameter, Thickness, Power & Edge Design
9 Diagnostic Fitting Procedures
8.1 Lens Selection & Application Procedures 8.2 Fluorescein Pattern Evaluation for RGP Lenses 8.3 Soft Lens Movement, Centration & Coverage
10 Fit Evaluation & Over-Refraction
Toric Lens Axis Rotation, LARS Rule & Stabilization Patient Comfort, Visual Acuity & Over-Refraction Modifying Base Curve, Diameter, Sag & Power from Findings
11 Dispensing: Wearing Schedules & Replacement
Daily, Flexible & Extended/Continuous Wear Schedules Daily, Biweekly, Monthly & Conventional Replacement Adaptation Protocols & Patient Compliance Counseling
12 Dispensing: Lens Care Systems
Solution Compatibility with Lens Types Chemical, Heat/UV, Hydrogen Peroxide & Neutralization Surfactant Cleaners, Protein Removers & Weekly Cleaning Solution Sensitivities, Incompatibilities & Adverse Reactions
13 Dispensing: Handling & Hygiene
12.1 Soft Lens Insertion & Removal Techniques 12.2 RGP Insertion, Removal & Emergency Responses 12.3 Hygiene, Soaps, Cosmetics & Storage Containers 12.4 Verifying Lens Parameters Against the Order at Dispensing
14 Follow-Up: Subjective & Objective Findings
13.1 Subjective Complaints: Dryness, Awareness, Blurry Vision, Pain & Photophobia 13.2 Steep vs Flat Lens Fit (Rigid & Soft) & Everted Lens 13.3 Injection, Edema, Discharge, Vision Loss & Lid Problems 13.4 Visual Acuity, Over-Refraction & Gross Evaluation Techniques
15 Follow-Up: Staining Patterns & Complications
14.1 Staining Patterns: 3 & 9 O'Clock, Foreign Body, SPK, Arcuate, Smile & Dimple Veiling 14.2 SEAL, CLARE, VLK, SLK & CLPU 14.3 Microbial Keratitis, Acanthamoeba, Dendritic Ulcer & Infiltrates 14.4 Corneal Molding/Warpage, Dellen & Mucin Balls
16 Follow-Up: Management Protocols
GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols Changing Lens Parameters at Follow-Up & Documenting Records
17 Regulatory & Administrative
FCLCA, FDA, FTC, Contact Lens Rule & Prescriber Verification HIPAA, PHI, OSHA, CDC, ANSI & Universal Precautions Record Retention, Inventory, Ordering & Documentation Methodology
Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols
Key Takeaways Explain This Topic AI
Standard daily wear follow-up schedule is 1 week, 1 month, 3 months, then every 6 months; the first follow-up after dispensing is typically at 1 week.
Extended/continuous wear requires closer monitoring — 1 week with lens on, 1 month, 3 months, then every 6 months — because of elevated infection and hypoxia risk.
Therapeutic (bandage) lens patients follow the prescribing doctor's schedule with close monitoring for healing and infection risk.
Postsurgical fitting is deferred to the surgeon's timeline: PK 3-12 months of stability, LASIK 3-6 months, PRK 3 months — never fit before clearance.
Pathology patients (keratoconus, dry eye) and psychologically apprehensive patients require more frequent follow-up, written instructions, and gradual adaptation.
Last updated: July 2026
Follow-Up Protocols by Modality
Quick Answer: Follow-up intervals are dictated by the modality and the patient's ocular status , not by a universal calendar. Daily wear follows 1 week, 1 month, 3 months, and 6 months. Extended wear, therapeutic, postsurgical, and pathology patients require closer monitoring. The first follow-up after dispensing is typically at 1 week to confirm adaptation and rule out silent complications.
Standard Daily Wear Protocol
The standard daily wear follow-up schedule balances adaptation monitoring with early detection of complications.
- Interval Purpose
- 1 week Confirm adaptation, fit, and ocular health; verify compliance with care system
- 1 month Confirm sustained adaptation and comfort; address minor parameter adjustments
- 3 months Confirm long-term adaptation; detect early GPC or deposit issues
6 months (then every 6 months) Routine health check; tarsal plate evaluation; parameter and prescription review
- What to Check at Every Follow-Up
- History — wearing time, comfort, vision, care system compliance
- Visual acuity — with and without over-refraction
- Lens fit — centration, movement, coverage (Keratometer mire distortion on lens = poor fit or warpage)
Ocular health — cornea (staining, infiltrates, neovascularization), conjunctiva, tarsal plate (evert lid) , lid margins
Lens condition — deposits, scratches, chips, warpage
Exam point: The first follow-up after dispensing is typically 1 week . This is short enough to catch adaptation problems and silent complications but long enough for the patient to demonstrate real-world wearing patterns.
Extended Wear / Continuous Wear Protocol
Extended wear (sleeping in lenses) carries a 5-10x higher risk of bacterial keratitis than daily wear. The follow-up schedule is intentionally tighter and includes a visit with the lens on to assess the closed-eye physiology.
- Interval With Lens On? Purpose
- 1 week Yes Assess closed-eye physiology; check for staining, infiltrates
- 1 month Yes Confirm sustained tolerance; detect early GPC
- 3 months Yes Monitor for neovascularization and limbal injection
- Every 6 months Yes Routine extended-wear health surveillance
- Extended Wear Red Flags
- Corneal staining > grade 2
- Infiltrates > 1 mm or increasing in number
- Limbal injection or neovascularization > 0.5 mm
- GPC grade 2 or higher
- Patient non-compliance with replacement schedule
Exam point: Any of these red flags warrant discontinuation of extended wear and refitting to daily wear, or referral to the prescribing doctor if pathology is present.
Therapeutic (Bandage) Lens Protocol
A therapeutic lens is a bandage lens prescribed by a doctor to protect the cornea — typically for epithelial defects, recurrent erosions, or after corneal surgery. The fitter is often co-managing with an ophthalmologist.
- Follow-Up Principles
- Follow the prescribing doctor's schedule — typically every 1-3 days initially, then weekly
- Monitor healing of the underlying condition (epithelial defect size, erosion recurrence)
Monitor infection risk — therapeutic lenses are used on compromised corneas; watch for infiltrates, discharge, anterior chamber reaction
- Lens change — per doctor's order; commonly replaced every 1-2 weeks for soft bandage lenses
- Pain change — sudden increase in pain may indicate infection or poor fit; refer immediately
Exam point: Therapeutic lens follow-up is never routine — it is dictated by the underlying pathology and the prescribing doctor's orders. Suspect infection in any therapeutic lens patient with new pain, redness, or discharge.
Postsurgical Fitting Protocol
Patients who have had ocular surgery require deferred fitting per the surgeon's timeline. Fitting before clearance risks damaging the healing tissue.
Surgery-Specific Timelines
Surgery Stable Before Fitting Special Considerations
Penetrating Keratoplasty (PK) 3-12 months, often >12 months All sutures out; stable topography; avoid pressure on graft
- LASIK 3-6 months Wait for refractive and topographic stability; avoid suction
- PRK 3 months Epithelium healed; refraction stable
- Cataract 1-3 months Stable keratometry; rule out cystoid macular edema
- Radial Keratotomy (RK) 6 months Avoid rigid lens on RK incisions; consider scleral
- Postsurgical Fitting Considerations
- Corneal shape change — surgery alters curvature; pre-surgery base curve and sagittal depth are useless
- Avoid suction on any postsurgical cornea; use scleral or corneoscleral designs when possible
- GPC risk — higher in postsurgical patients due to altered lid-cornea relationship
Co-manage with surgeon — report findings; never change fit without surgeon clearance in the early post-op period
Pathology Patient Protocol
Patients with keratoconus , dry eye , exposed sutures , corneal dystrophies , or other pathology require more frequent follow-up than standard schedules.
- Keratoconus
- Follow-up every 3-6 months once stable
- Watch for apical scarring , cone progression , 3 and 9 o'clock staining with RGP
- Scleral lenses reduce mechanical stress but require monitoring for midday fogging
- Dry Eye
- Follow-up every 3 months initially
- Monitor tear film, staining, lid wiper epitheliopathy
- Adjust lens material and care system based on tear quality
- Consider punctual plugs or prescription dry-eye therapy in conjunction with the managing doctor
- Psychologically Unstable / Apprehensive Patient Protocol
Patients who are anxious, apprehensive, or have difficulty with insertion and removal require extra education and a gradual adaptation schedule .
- Adaptation Schedule
- Begin with short wearing time — 2-3 hours per day, increasing by 1-2 hours daily
- Provide written instructions — step-by-step insertion, removal, and care guide
- Schedule a 1-week check — to assess adaptation and address concerns early
- Hand-on training — observe the patient performing insertion and removal before sending them home
- Phone availability — give the patient a number to call for early problems
- What to Document
- Time spent on training
- Wearing time progression
- Patient's confidence with insertion and removal
- Any signs of anxiety affecting compliance
Exam point: The first follow-up after dispensing is typically 1 week for all modalities, but apprehensive patients may benefit from a 1-2 day phone check in addition to the 1-week visit.
Summary Table of Follow-Up Intervals
- Modality 1st F/U Then Long-Term
- Daily wear 1 week 1 month, 3 months Every 6 months
- Extended wear 1 week (lens on) 1 month, 3 months (lens on) Every 6 months (lens on)
- Therapeutic Per MD (often 1-3 days) Per MD Per MD
- Postsurgical Per surgeon clearance Per surgeon Standard after stable
- Pathology (KCN, dry eye) 1 week 1 month, 3 months Every 3-6 months
- Apprehensive patient 1 week + phone check 1 month Standard once stable
- Key Takeaways
Daily wear follows 1 week, 1 month, 3 months, then every 6 months.
Extended wear requires visits with the lens on to assess closed-eye physiology.
Therapeutic lens follow-up is dictated by the prescribing doctor; suspect infection with any new pain.
Postsurgical fitting is deferred per surgeon's timeline (PK 3-12 months, LASIK 3-6, PRK 3).
Pathology and apprehensive patients need more frequent follow-up and written instructions.