Study guide
GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation
NCLE CLRE Contact Lens Registry Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 About the CLRE Exam 0.2 How to Use This Study Guide
2 Ocular Anatomy: Adnexa
Tear Film: Layers, Glands & Break-Up Time Conjunctiva, Lids, Lashes, Fornix & Canthi Blink Rate, Lid Function & Contact Lens Wear Effects
3 Ocular Anatomy: Anterior & Posterior Segment
Corneal Layers, Curvature, Topography & Metabolism Iris, Pupil, Sclera & Anterior Chamber Crystalline Lens, Retina, Choroid & Posterior Chamber
4 Refractive Errors & Contact Lens Optics
Myopia, Hyperopia, Astigmatism, Presbyopia & Anisometropia Refraction, Prism, Lacrimal Lens, Accommodation & Transposition Vertex Distance, Sagittal Depth & Spherical Equivalent
5 Measurement Instrumentation
Keratometer/Ophthalmometer: Calibration, Readings & Interpretation Corneal Topography & OCT for Contact Lens Fitting Schirmer Tests & Tear Break-Up Time
6 Observation & Verification Instrumentation
Slit Lamp (Biomicroscope) Operation & Illumination Slit Lamp Evaluation With & Without Contact Lenses Radiuscope, Lensometer, Thickness Gauge & ANSI Z80
7 Prefitting Patient Evaluation
6.1 Lifestyle, Occupation, Environment & Motivation 6.2 Medical History, Diseases, Medications & Allergies 6.3 Contraindications & Factors for Successful Wear 6.4 Relating Corneal Measurements, Rx & Lens Parameters
8 Lens Materials, Design & Parameter Selection
Dk, Dk/t, Thermal Conductivity & Holden-Mertz Water Content, Wetting Angle, Modulus, Silicone Hydrogel & Surface Treatments Toric, Multifocal, Aspheric, Hybrid, Scleral, Orthokeratology & Quadrant-Specific Base Curve, Peripheral Curves, Diameter, Thickness, Power & Edge Design
9 Diagnostic Fitting Procedures
8.1 Lens Selection & Application Procedures 8.2 Fluorescein Pattern Evaluation for RGP Lenses 8.3 Soft Lens Movement, Centration & Coverage
10 Fit Evaluation & Over-Refraction
Toric Lens Axis Rotation, LARS Rule & Stabilization Patient Comfort, Visual Acuity & Over-Refraction Modifying Base Curve, Diameter, Sag & Power from Findings
11 Dispensing: Wearing Schedules & Replacement
Daily, Flexible & Extended/Continuous Wear Schedules Daily, Biweekly, Monthly & Conventional Replacement Adaptation Protocols & Patient Compliance Counseling
12 Dispensing: Lens Care Systems
Solution Compatibility with Lens Types Chemical, Heat/UV, Hydrogen Peroxide & Neutralization Surfactant Cleaners, Protein Removers & Weekly Cleaning Solution Sensitivities, Incompatibilities & Adverse Reactions
13 Dispensing: Handling & Hygiene
12.1 Soft Lens Insertion & Removal Techniques 12.2 RGP Insertion, Removal & Emergency Responses 12.3 Hygiene, Soaps, Cosmetics & Storage Containers 12.4 Verifying Lens Parameters Against the Order at Dispensing
14 Follow-Up: Subjective & Objective Findings
13.1 Subjective Complaints: Dryness, Awareness, Blurry Vision, Pain & Photophobia 13.2 Steep vs Flat Lens Fit (Rigid & Soft) & Everted Lens 13.3 Injection, Edema, Discharge, Vision Loss & Lid Problems 13.4 Visual Acuity, Over-Refraction & Gross Evaluation Techniques
15 Follow-Up: Staining Patterns & Complications
14.1 Staining Patterns: 3 & 9 O'Clock, Foreign Body, SPK, Arcuate, Smile & Dimple Veiling 14.2 SEAL, CLARE, VLK, SLK & CLPU 14.3 Microbial Keratitis, Acanthamoeba, Dendritic Ulcer & Infiltrates 14.4 Corneal Molding/Warpage, Dellen & Mucin Balls
16 Follow-Up: Management Protocols
GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols Changing Lens Parameters at Follow-Up & Documenting Records
17 Regulatory & Administrative
FCLCA, FDA, FTC, Contact Lens Rule & Prescriber Verification HIPAA, PHI, OSHA, CDC, ANSI & Universal Precautions Record Retention, Inventory, Ordering & Documentation Methodology
GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation
Key Takeaways Explain This Topic AI
Giant Papillary Conjunctivitis (GPC) is an immunologic reaction to lens deposits and proteins, characterized by papillae on the superior tarsal conjunctiva that must be evaluated by everting the upper lid at every follow-up visit.
GPC is graded 0 through 4 based on papillae size, injection, mucus, and lens tolerance; management ranges from enhanced cleaning and daily disposables to mast-cell stabilizers and discontinuation until resolution.
Blepharitis (anterior staph/seborrheic and posterior MGD) drives deposits, discomfort, and reduced wearing time; managed with warm compresses, lid hygiene, and lid scrubs rather than lens parameter changes alone.
Contact lens-induced ptosis may be aponeurotic (from RGP insertion or suction) or mechanical (from a heavy lens); document marginal reflex distance and monitor progression before refitting.
Tarsal plate assessment — papillae, injection, scarring — is a required element of every follow-up, not only when symptoms are present.
Last updated: July 2026
GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation
Quick Answer: At every contact lens follow-up, evert the upper lid and inspect the superior tarsal conjunctiva. Papillae, injection, and scarring on the tarsal plate drive the diagnosis of Giant Papillary Conjunctivitis (GPC) , the most significant lens-related complication you will manage. Lid margin disease ( blepharitis ) and drooping lids ( ptosis ) are coexisting conditions that shorten wearing time and change fitting strategy.
Giant Papillary Conjunctivitis (GPC)
GPC is an immunologic, mechanically amplified inflammatory reaction to lens deposits, proteins, and the mechanical trauma of the lens edge against the tarsal conjunctiva. It is not an infection. The hallmark finding is papillae on the superior tarsal conjunctiva — you will miss it 100% of the time if you do not evert the upper lid.
- Symptoms and Signs
- Itching — the most characteristic symptom; often worse after lens removal
- Mucus discharge — stringy, clear-to-white
- Lens intolerance — patient reports the lens "just doesn't feel right anymore"
- Lens rides up — excessive movement and superior displacement under the upper lid
- Blurred vision — from mucus coating the lens surface
- Papillae on the superior tarsal conjunctiva, ranging from 0.1 mm to >1 mm
- GPC Grading (0-4)
- Grade Papillae Size Redness Mucus Lens Tolerance
- 0 Normal, smooth None None Full wearing time
- 1 <0.3 mm, mild Mild Trace Mild reduction
- 2 0.3-0.5 mm Moderate Small Reduced wearing time
- 3 0.5-0.8 mm, elevated Marked Moderate Significant intolerance
- 4 >0.8 mm, giant papillae Severe Heavy Lens intolerance, cannot wear
- GPC Management (Escalating Steps)
- Improve cleaning — enforce rub-and-rinse; switch to peroxide systems
- Switch to daily disposable — eliminates deposit buildup entirely; first-line for moderate GPC
- Shorten wearing time — reduce daily hours and total replacement frequency
Switch lens material — RGP lenses deposit less protein and often resolve GPC; low-water ionic materials deposit more
Pharmacologic — mast-cell stabilizer/antihistamine combination drops (e.g., olopatadine, alcaftadine) for moderate-to-severe cases
Discontinue lens wear — required for grade 3-4 until the tarsal plate normalizes; resume with a new lens type and aggressive regimen
Exam point: RGP lenses are often better tolerated in GPC because they deposit less protein and have less mechanical interaction with the tarsal conjunctiva.
Blepharitis
Blepharitis is inflammation of the eyelids. It is not caused by the contact lens , but it directly impacts lens success through deposits, discomfort, and reduced wearing time. The two forms affect different anatomy:
- Anterior Blepharitis
- Staphylococcal — collarettes around lashes, chronic lid inflammation
- Seborrheic — greasy scales at lash base, associated with seborrheic dermatitis
- Posterior Blepharitis (Meibomian Gland Dysfunction, MGD)
- Plugged meibomian glands — express poorly; abnormal lipid layer
- Telangiectasia of lid margin
- Foamy tears — disrupted tear film causes rapid lens surface deposition
- Impact on Contact Lens Wear
- Finding Effect on Lens Wear
- Deposits Shortens lens life; reduces wettability
- Discomfort Reduces wearing time
- Foam/lipid layer Blurred vision, filmy lens surface
- Redness Mimics GPC; must differentiate
- Blepharitis Management
- Warm compresses — 5-10 minutes, twice daily, to melt meibomian lipids
- Lid hygiene — lid scrubs along the lash margin (commercial pads or dilute baby shampoo)
- Lid massage — express meibomian glands after warming
- Antibiotic — topical azithromycin or oral doxycycline for MGD with inflammation
- Tear supplementation — preservative-free artificial tears
- Hold lens wear in acute exacerbations until lid margins quiet
Exam point: Treat blepharitis before refitting the lens. A lens parameter change alone will not fix deposit-driven discomfort when the lid margin is the source.
Ptosis (Contact Lens-Induced)
Ptosis is drooping of the upper lid. Contact lens wear can cause or exacerbate ptosis through two mechanisms:
- Aponeurotic Ptosis
- Cause — repeated stretching or trauma to the levator aponeurosis
- Risk factors — RGP insertion with suction, forceful lid pulling, hard lens removal
- Finding — elevated lid crease, thinning of the upper lid
- Mechanical Ptosis
- Cause — weight of a heavy lens (e.g., high-plus scleral or a thick RGP) on the upper lid
- Risk factors — large-diameter, thick designs; long-term wear
- Finding — reduced marginal reflex distance (MRD) measured in primary gaze
- Documentation and Action
- Measure marginal reflex distance (MRD1) and document at baseline and follow-up
- Compare to pre-fit photos if available
- Switch technique — eliminate suction use, teach two-hand insertion
- Reduce lens mass — thinner design or smaller diameter
- Refer — progressive ptosis or MRD <2 mm warrants ophthalmology referral
- Tarsal Plate Evaluation (Mandatory at Every Follow-Up)
The tarsal plate is the dense connective tissue core of the upper lid. The overlying tarsal conjunctiva is the primary site of contact lens complications. Every follow-up visit requires lid eversion — even asymptomatic patients. Early GPC is silent.
- Technique
- Instruct the patient to look down
- Grasp lashes and lid margin with a cotton swab or forceps
- Push down on the tarsal plate while folding the lid up over the swab
- Inspect the superior tarsal conjunctiva under good illumination
Grade papillae , note injection , and check for scarring (trantas dots, conjunctival scarring suggest chronic disease)
What You Are Looking For
- Finding Suggests
- Smooth, pale conjunctiva Healthy tarsal plate (grade 0)
- Small papillae (<0.3 mm) Early GPC (grade 1)
- Large papillae (>0.5 mm) Established GPC (grade 2-4)
- Injection and mucus Active GPC or allergic conjunctivitis
- Scarring, white lines Chronic GPC, vernal, or prior infection
Exam point: The superior tarsal conjunctiva is the only location where GPC papillae appear. The inferior tarsal conjunctiva and bulbar conjunctiva are not involved in classic GPC.
Key Takeaways
GPC requires lid eversion to diagnose; grade 0-4 and escalate care from cleaning to discontinuation.
Blepharitis (anterior and posterior) drives deposits and discomfort; treat the lid margin before changing the lens.
Ptosis from contact lens wear may be aponeurotic or mechanical; document MRD and modify insertion technique.
Tarsal plate evaluation is mandatory at every follow-up — asymptomatic patients can have grade 1-2 GPC.