Study guide

Tear Film: Layers, Glands & Break-Up Time

NCLE CLRE Contact Lens Registry Exam Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 About the CLRE Exam 0.2 How to Use This Study Guide

2 Ocular Anatomy: Adnexa

Tear Film: Layers, Glands & Break-Up Time Conjunctiva, Lids, Lashes, Fornix & Canthi Blink Rate, Lid Function & Contact Lens Wear Effects

3 Ocular Anatomy: Anterior & Posterior Segment

Corneal Layers, Curvature, Topography & Metabolism Iris, Pupil, Sclera & Anterior Chamber Crystalline Lens, Retina, Choroid & Posterior Chamber

4 Refractive Errors & Contact Lens Optics

Myopia, Hyperopia, Astigmatism, Presbyopia & Anisometropia Refraction, Prism, Lacrimal Lens, Accommodation & Transposition Vertex Distance, Sagittal Depth & Spherical Equivalent

5 Measurement Instrumentation

Keratometer/Ophthalmometer: Calibration, Readings & Interpretation Corneal Topography & OCT for Contact Lens Fitting Schirmer Tests & Tear Break-Up Time

6 Observation & Verification Instrumentation

Slit Lamp (Biomicroscope) Operation & Illumination Slit Lamp Evaluation With & Without Contact Lenses Radiuscope, Lensometer, Thickness Gauge & ANSI Z80

7 Prefitting Patient Evaluation

6.1 Lifestyle, Occupation, Environment & Motivation 6.2 Medical History, Diseases, Medications & Allergies 6.3 Contraindications & Factors for Successful Wear 6.4 Relating Corneal Measurements, Rx & Lens Parameters

8 Lens Materials, Design & Parameter Selection

Dk, Dk/t, Thermal Conductivity & Holden-Mertz Water Content, Wetting Angle, Modulus, Silicone Hydrogel & Surface Treatments Toric, Multifocal, Aspheric, Hybrid, Scleral, Orthokeratology & Quadrant-Specific Base Curve, Peripheral Curves, Diameter, Thickness, Power & Edge Design

9 Diagnostic Fitting Procedures

8.1 Lens Selection & Application Procedures 8.2 Fluorescein Pattern Evaluation for RGP Lenses 8.3 Soft Lens Movement, Centration & Coverage

10 Fit Evaluation & Over-Refraction

Toric Lens Axis Rotation, LARS Rule & Stabilization Patient Comfort, Visual Acuity & Over-Refraction Modifying Base Curve, Diameter, Sag & Power from Findings

11 Dispensing: Wearing Schedules & Replacement

Daily, Flexible & Extended/Continuous Wear Schedules Daily, Biweekly, Monthly & Conventional Replacement Adaptation Protocols & Patient Compliance Counseling

12 Dispensing: Lens Care Systems

Solution Compatibility with Lens Types Chemical, Heat/UV, Hydrogen Peroxide & Neutralization Surfactant Cleaners, Protein Removers & Weekly Cleaning Solution Sensitivities, Incompatibilities & Adverse Reactions

13 Dispensing: Handling & Hygiene

12.1 Soft Lens Insertion & Removal Techniques 12.2 RGP Insertion, Removal & Emergency Responses 12.3 Hygiene, Soaps, Cosmetics & Storage Containers 12.4 Verifying Lens Parameters Against the Order at Dispensing

14 Follow-Up: Subjective & Objective Findings

13.1 Subjective Complaints: Dryness, Awareness, Blurry Vision, Pain & Photophobia 13.2 Steep vs Flat Lens Fit (Rigid & Soft) & Everted Lens 13.3 Injection, Edema, Discharge, Vision Loss & Lid Problems 13.4 Visual Acuity, Over-Refraction & Gross Evaluation Techniques

15 Follow-Up: Staining Patterns & Complications

14.1 Staining Patterns: 3 & 9 O'Clock, Foreign Body, SPK, Arcuate, Smile & Dimple Veiling 14.2 SEAL, CLARE, VLK, SLK & CLPU 14.3 Microbial Keratitis, Acanthamoeba, Dendritic Ulcer & Infiltrates 14.4 Corneal Molding/Warpage, Dellen & Mucin Balls

16 Follow-Up: Management Protocols

GPC, Blepharitis, Ptosis & Tarsal Plate Evaluation Daily Wear, Extended, Therapeutic, Postsurgical & Pathology Protocols Changing Lens Parameters at Follow-Up & Documenting Records

17 Regulatory & Administrative

FCLCA, FDA, FTC, Contact Lens Rule & Prescriber Verification HIPAA, PHI, OSHA, CDC, ANSI & Universal Precautions Record Retention, Inventory, Ordering & Documentation Methodology

Tear Film: Layers, Glands & Break-Up Time

Key Takeaways Explain This Topic AI

The tear film is a three-layered structure (lipid, aqueous, mucin) approximately 7-9 micrometers thick that lubricates, nourishes, and optically smooths the corneal surface

Tear film break-up time (TBUT) of 10 seconds or longer is considered stable; values under 10 seconds indicate tear film instability and dry eye

Meibomian glands in the tarsal plate produce the lipid layer; Meibomian gland dysfunction (MGD) is the leading cause of evaporative dry eye

The Schirmer test measures aqueous tear production; less than 10 mm of wetting in 5 minutes (with anesthesia) suggests aqueous-deficient dry eye

For contact lens wearers, the tear film is the interface between the lens and cornea; inadequate tears cause discomfort, deposits, corneal staining, and infection risk

Last updated: July 2026

Tear Film: Layers, Glands & Break-Up Time

Quick Answer: The precorneal tear film is a three-layered structure (lipid, aqueous, mucin) approximately 7-9 micrometers thick that lubricates, nourishes, and optically smooths the corneal surface. Tear film break-up time (TBUT) of 10 seconds or longer is considered stable; values under 10 seconds indicate instability and dry eye. For contact lens wearers, the tear film is the interface between the lens and cornea, and its quality determines comfort, vision, and safety.

The Three Tear Film Layers

The tear film is classically described as a trilaminar structure . Although modern research suggests it behaves more like a gradient, the three-layer model remains the NCLE-relevant framework for exam questions.

  • Layer Source Thickness Primary Function
  • Lipid (outer) Meibomian glands (tarsal plate) ~0.1 micrometers Retards evaporation, smooths optical surface

Aqueous (middle) Main & accessory lacrimal glands ~7 micrometers Supplies oxygen, nutrients, antibacterial proteins

  • Mucin (inner) Goblet cells of conjunctiva ~1-2 micrometers Anchors tear film to corneal epithelium
  • Lipid Layer

The lipid layer is the outermost film, secreted by the Meibomian glands (also called tarsal glands) embedded in the tarsal plate of the upper and lower lids. There are roughly 30-40 Meibomian glands in the upper lid and 20-30 in the lower lid. The lipid layer has polar and non-polar phases that together reduce aqueous evaporation by up to 90 percent. Meibomian gland dysfunction (MGD) is the leading cause of evaporative dry eye and is highly relevant in CL candidates.

Aqueous Layer

The aqueous layer is the thickest component (~7 micrometers) and is produced by the main lacrimal gland (orbital and palpebral lobes) plus the accessory lacrimal glands of Krause and Wolfring . It carries electrolytes, glucose, oxygen, lysozyme, lactoferrin, IgA, and growth factors. The aqueous layer is what the Schirmer test quantifies.

Mucin Layer

The mucin layer is secreted by goblet cells (densely packed in the inferonasal conjunctiva) and by corneal and conjunctival epithelial cells. Mucins are glycoproteins that convert the hydrophobic corneal surface into a wettable, hydrophilic one. Without mucin, the tear film beads up and breaks apart regardless of aqueous volume.

Tear Film Geometry: Meniscus and Lacrimal Lake

At the lid margins, the tear film forms the tear meniscus (lacrimal lake), a small reservoir 0.2-0.5 mm in height along the lower lid margin. A reduced meniscus height (under 0.2 mm) is a clinical sign of aqueous deficiency. Tears drain through the puncta at the medial canthus into the canaliculi, lacrimal sac, and nasolacrimal duct.

Tear Film Break-Up Time (TBUT)

TBUT is the time, in seconds, between a complete blink and the first appearance of a dry spot (dark area) on the cornea under fluorescein and cobalt blue light.

  • Normal: 10 seconds or longer
  • Suspect instability: under 10 seconds
  • Frank dry eye: under 5 seconds

A reduced TBUT indicates that one or more layers are failing, most commonly the lipid layer (evaporative) or mucin layer (wettability). For CL candidates, a low pre-fitting TBUT predicts lens intolerance, deposit formation, and corneal staining.

Schirmer Test

The Schirmer test uses a 5 x 35 mm filter paper strip hooked over the lower lid margin (typically the lateral third, away from the punctum). After 5 minutes, the wetting length is measured.

  • Schirmer I (with anesthesia) Interpretation
  • Greater than 10 mm Normal aqueous production
  • 5-10 mm Borderline / mild deficiency
  • Under 5 mm Aqueous-deficient dry eye

Schirmer I without anesthesia measures both basal and reflex tearing; with anesthesia it isolates basal secretion. Schirmer II (nasal stimulation) tests reflex tearing.

Contact Lens Relevance

The tear film is the single interface between a contact lens and the cornea. A soft lens sits on the post-lens tear film; a rigid lens rides on the tear film that acts as the true optical element.

Clinical consequences of inadequate tears in CL wearers:

  • Comfort: dryness, burning, foreign body sensation, end-of-day intolerance
  • Vision: fluctuating vision, especially with rigid gas permeable (RGP) lenses
  • Deposits: protein and lipid deposits accelerate when tears stagnate
  • Corneal staining: punctate epithelial erosions, especially inferiorly or 3-9 o'clock staining with RGPs
  • Infection risk: reduced lysozyme and lactoferrin delivery raises microbial risk

A contact lens itself thins the lipid layer and disrupts mucin distribution at the lens edge. Even a normal tear film may be marginally adequate once a lens is added. Pre-fitting TBUT and Schirmer values are therefore part of the NCLE-recommended fitting workup.