Study guide

3.2 Clinical Procedures & Specimen Collection

CMA Certified Medical Assistant Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: CMA (AAMA) Exam Overview

CMA (AAMA) Certification Exam Overview CMA Certification Process & Eligibility Study Strategies & Test-Taking Tips

2 Chapter 1: General Knowledge (21%)

1.1 Anatomy, Physiology & Medical Terminology 1.2 Pharmacology & Nutrition 1.3 Psychology, Human Behavior & Lifespan Development 1.4 Immunizations, CDC Schedules & Vaccine Safety

3 Chapter 1B: Safety, Infection Control & Emergency Preparedness

Safety, Infection Control & Medical Asepsis Emergency Management, First Aid & Office Preparedness

4 Chapter 2: Administrative Knowledge (20%)

2.1 Medical Business Practices & Insurance 2.2 Scheduling & Records Management

5 Chapter 3: Clinical Knowledge — Patient Care

3.1 Vital Signs & Patient Assessment 3.2 Clinical Procedures & Specimen Collection

6 Chapter 4: Clinical Knowledge — Diagnostic & Lab

4.1 Laboratory Procedures 4.2 Diagnostic Testing

7 Chapter 5: Professional Practice & Communication

5.1 Professional Communication & Patient Education 5.2 Legal & Ethical Practice

3.2 Clinical Procedures & Specimen Collection

Key Takeaways Explain This Topic AI

The three types of injections commonly administered by medical assistants are intramuscular (IM), subcutaneous (SubQ), and intradermal (ID)

IM injection sites include the deltoid (adults), vastus lateralis (infants/toddlers), ventrogluteal (large volumes), and dorsogluteal (less preferred due to sciatic nerve)

Standard precautions (universal precautions) apply to ALL patients regardless of known or suspected infection status

The chain of infection has 6 links: infectious agent, reservoir, portal of exit, mode of transmission, portal of entry, susceptible host

Phlebotomy order of draw (from first to last): blood cultures (yellow), light blue (coagulation), red (serum), gold/SST (serum separator), green (heparin), lavender/purple (EDTA), gray (glucose)

Sterile technique requires maintaining a sterile field with a 1-inch border margin, never reaching over the field, and using sterile gloves

OSHA Bloodborne Pathogen Standard requires employers to provide PPE, hepatitis B vaccination, sharps containers, and an exposure control plan

Wound care principles include cleaning from the center outward, applying appropriate dressings, and monitoring for signs of infection (redness, warmth, swelling, drainage, fever)

Last updated: February 2026

Clinical procedures are hands-on skills that medical assistants perform daily. The CMA exam tests your knowledge of injection techniques, phlebotomy, wound care, sterile technique, infection control, and specimen handling.

  • Injection Administration
  • Types of Injections
  • Type Needle Angle Needle Gauge Volume Common Sites
  • Intradermal (ID) 10-15 degrees 25-27 gauge, 3/8-5/8 inch 0.01-0.1 mL Inner forearm (TB test, allergy testing)

Subcutaneous (SubQ) 45 degrees (or 90 if pinching skin fold) 25-27 gauge, 5/8 inch 0.5-1.0 mL Upper arm, abdomen, anterior thigh

Intramuscular (IM) 90 degrees 20-23 gauge, 1-1.5 inch Up to 3 mL (deltoid max 1 mL) Deltoid, vastus lateralis, ventrogluteal

IM Injection Sites

  • Site Location Use
  • Deltoid Upper arm, 2-3 finger widths below acromion process Adults, vaccines, max 1 mL
  • Vastus lateralis Outer middle third of the thigh Infants and toddlers (preferred), larger volumes
  • Ventrogluteal Hip area (gluteus medius) Adults, large volumes (up to 3 mL), safest IM site
  • Dorsogluteal Upper outer quadrant of buttock Less preferred — risk of sciatic nerve injury
  • Injection Safety
  • Always verify the seven rights before administration
  • Never recap needles — activate the safety device immediately after injection
  • Dispose of needles in a sharps container immediately

Aspirate before injecting IM (to ensure not in a blood vessel) — though CDC/ACIP no longer requires aspiration for vaccine administration

  • Document: medication name, dose, route, site, lot number, expiration date, and your initials
  • Phlebotomy (Blood Collection)
  • Order of Draw (Tube Color)

The correct order of draw prevents cross-contamination of additives between tubes:

  • Order Tube Color Additive Use
  • 1 Yellow (SPS) Sodium polyanethol sulfonate Blood cultures
  • 2 Light blue Sodium citrate Coagulation studies (PT, PTT, INR)
  • 3 Red None (no additive) Serum tests, serology
  • 4 Gold/SST Clot activator + gel separator Chemistry, thyroid, immunology
  • 5 Green Heparin (sodium/lithium) STAT chemistry, arterial blood gas
  • 6 Lavender/Purple EDTA CBC, blood typing, hemoglobin A1C
  • 7 Gray Potassium oxalate + sodium fluoride Glucose, alcohol levels

Memory aid: " Y ou L ove R eally G reat G reen L avender G ardens" (Yellow, Light blue, Red, Gold, Green, Lavender, Gray)

  • Phlebotomy Procedure
  • Verify patient identity (two identifiers)
  • Verify order and prepare supplies
  • Apply tourniquet 3-4 inches above the venipuncture site (max 1 minute)
  • Select vein by palpation (median cubital vein is preferred — large, well-anchored, less painful)
  • Cleanse site with 70% isopropyl alcohol in a circular motion from center outward; allow to air dry
  • Insert needle at 15-30 degree angle, bevel up
  • Fill tubes in correct order of draw
  • Remove tourniquet before removing needle
  • Apply gauze with pressure, then adhesive bandage
  • Label all tubes at the bedside with patient name, DOB, date/time of collection, and your initials
  • Infection Control
  • Standard Precautions

Standard precautions apply to ALL patients and include:

  • Hand hygiene — most important infection control measure
  • PPE (gloves, gowns, masks, eye protection) based on anticipated exposure
  • Sharps safety — use safety-engineered devices, never recap needles
  • Respiratory hygiene/cough etiquette
  • Safe injection practices — one needle, one syringe, one patient
  • Environmental cleaning — regular disinfection of surfaces and equipment
  • Chain of Infection

The chain of infection has 6 links — breaking any link prevents transmission:

  • Infectious agent — the pathogen (bacteria, virus, fungus, parasite)
  • Reservoir — where the pathogen lives and multiplies (humans, animals, environment)
  • Portal of exit — how the pathogen leaves the reservoir (respiratory, GI, blood, skin)
  • Mode of transmission — how the pathogen travels (direct contact, droplet, airborne, vehicle, vector)
  • Portal of entry — how the pathogen enters the new host (mucous membranes, breaks in skin, respiratory tract)
  • Susceptible host — someone vulnerable to infection (immunocompromised, elderly, infants)
  • OSHA Bloodborne Pathogen Standard

OSHA requires employers to:

  • Provide free hepatitis B vaccination to all at-risk employees
  • Maintain an Exposure Control Plan (updated annually)
  • Provide appropriate PPE at no cost to employees
  • Provide sharps containers and safety-engineered devices
  • Provide post-exposure evaluation and follow-up after needlestick injuries
  • Train employees on bloodborne pathogen safety annually
  • Maintain exposure incident records for 30 years
  • Wound Care & Sterile Technique
  • Sterile Field Rules
  • The 1-inch border around a sterile field is considered contaminated
  • Never turn your back on a sterile field or reach across it
  • Keep sterile items above waist level
  • If sterility is questioned, it is contaminated — start over
  • Use sterile transfer forceps to add items to the sterile field
  • Open sterile packages: open the flap away from you first, then the sides, then the nearest flap
  • Wound Care Principles
  • Clean wounds from the center outward (least contaminated to most contaminated)
  • Use sterile technique for surgical wounds and any wound requiring sutures
  • Change dressings per provider orders and PRN (as needed)
  • Document wound appearance: size, color, drainage (amount, type, odor), surrounding skin condition
  • Signs of Wound Infection
  • Increased redness and warmth
  • Swelling and tenderness
  • Purulent drainage (pus)
  • Fever
  • Red streaking away from the wound (lymphangitis)
  • Urine Specimen Collection
  • Type Method Purpose
  • Random Any time, no prep Routine urinalysis

Clean-catch midstream Cleanse, void a small amount into toilet, collect midstream Culture and sensitivity (C&S), reduces contamination

  • First morning Collected upon waking Most concentrated; pregnancy tests, protein
  • 24-hour All urine collected over 24 hours in a special container Creatinine clearance, protein quantification
  • Catheterized Collected via urinary catheter Sterile specimen when C&C is not possible
  • Surgical Asepsis & Autoclave Operation
  • Levels of Infection Control
  • Level Method Kills Used For
  • Sanitization Cleaning with soap and water Reduces microorganisms Initial cleaning of instruments
  • Disinfection Chemical agents (bleach, glutaraldehyde) Most pathogens, NOT spores Surfaces, non-critical items

Sterilization Autoclave (steam), dry heat, chemical sterilant ALL microorganisms including spores Surgical instruments, critical items

  • Autoclave (Steam Sterilization)
  • Temperature : 250-254F (121-123C)
  • Pressure : 15-20 pounds per square inch (psi)
  • Time : 20-30 minutes (varies by load type and wrapping)
  • Wrapped instruments : 30 minutes at 250F
  • Unwrapped instruments : 20 minutes at 250F
  • Liquids : 30 minutes at 250F (vent exhaust slowly to prevent boilover)
  • Autoclave Quality Assurance

Chemical indicators (autoclave tape, strips): Change color when exposed to proper temperature — indicates exposure, NOT sterility

Biological indicators (spore tests): Gold standard for verifying sterilization — uses Geobacillus stearothermophilus spores

  • Run biological indicators weekly (or per manufacturer guidelines)
  • Load monitoring : Document each autoclave cycle (date, time, temperature, items, operator initials)
  • Sterile Package Handling
  • Check expiration date before using any sterile package
  • Check for tears, moisture, or damage — if compromised, the package is no longer sterile

Event-related sterility : Items remain sterile until the integrity of the packaging is compromised (replaced time-related sterility in most settings)

  • Store sterile items in a clean, dry, dust-free area away from sinks and floors
  • Medication Administration Documentation

After administering any medication, document:

  • Date and time of administration
  • Medication name (generic and/or brand)
  • Dose administered
  • Route of administration
  • Site of injection (if applicable)
  • Lot number and expiration date (especially for vaccines)
  • Patient response or adverse reactions
  • Initials and credentials of the person administering
  • Vaccine Administration

Check the Vaccine Information Statement (VIS) — must be provided to the patient (or guardian) before administration

Record in the patient's chart AND the immunization registry

Store vaccines per manufacturer guidelines (refrigerator 35-46F or freezer 5F and below, depending on the vaccine)

  • Monitor storage temperature with a data logger and document twice daily
  • Never reuse needles or syringes — one needle, one syringe, one patient