Study guide
1.2 Eligibility, Training, Retakes & Certification Maintenance
CMMC Certified CMMC Professional CCP
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Logistics
1.1 Exam Structure, Current Logistics & Official Blueprint 1.2 Eligibility, Training, Retakes & Certification Maintenance 1.3 Study Strategy, Blueprint Mapping & Authoritative Sources
2 Chapter 2: The CMMC Ecosystem & Stakeholder Roles
2.1 Governance & Oversight: DoD, DIBCAC, Cyber AB & ISACA 2.2 Industry Roles: C3PAOs, OSCs, Consultants, ATPs & APPs 2.3 Assessor Roles: CCP, CCA, Lead CCA, QA & Certifying Official
3 Chapter 3: Code of Professional Conduct & Ethics
3.1 Applying the CMMC Code of Professional Conduct 3.2 Conflicts of Interest, Independence & Consulting vs Assessment Boundaries 3.3 Confidentiality, Incident Escalation & Misconduct Reporting
4 Chapter 4: Legal Authorities, Federal Rules & Standards
4.1 FCI vs CUI: Statutory Foundations, E.O. 13556 & 32 CFR Part 2002 4.2 FAR, DFARS & 32 CFR Part 170 4.3 NIST Standards Hierarchy: SP 800-171, SP 800-171A & SP 800-172
5 Chapter 5: CMMC Model Architecture & Maturity Levels
5.1 CMMC Three-Level Architecture, Assessment Types & Affirmation 5.2 Level 1: 15 FAR Safeguarding Requirements & Annual Self-Assessment 5.3 Level 2 & Level 3: CUI Protection and Assessment Authority
6 Chapter 6: CMMC Domains: Access Control, Identity & Boundary Defense
6.1 Access Control (AC) Domain: 22 Practices & Core Implementation 6.2 Identification & Authentication (IA) Domain: MFA & Credential Management 6.3 System & Communications Protection (SC) Domain: Boundary Defense & Cryptography
7 Chapter 7: CMMC Domains: Audit, Configuration, Maintenance & Media
7.1 Audit & Accountability (AU) Domain: Logging, Review & Non-Repudiation 7.2 Configuration Management (CM) Domain: Baselines, Changes & Least Functionality 7.3 Maintenance (MA) & Media Protection (MP) Domains: Sanitization & Tool Control
8 Chapter 8: CMMC Domains: People, Physical, Incident Response & Integrity
8.1 Awareness & Training (AT) & Personnel Security (PS) Domains: Screening & Training 8.2 Physical Protection (PE): Level 1 FAR Requirements & Level 2 Mapping 8.3 Incident Response (IR), System Integrity (SI) & Risk Assessment (RA/CA) Domains
9 Chapter 9: CMMC Scoping Methodology & Boundary Definition
9.1 Scoping Fundamentals: Organizational Scope, Level 1 & Level 2 9.2 The 5 Asset Categories: CUI, SPA, CRMA, Specialized & Out-of-Scope 9.3 Boundary Definition, Data Flow Diagrams & Secure Enclave Isolation
10 Chapter 10: Cloud Service Providers, ESPs & Supply Chain Flowdown
10.1 Cloud Service Providers (CSPs): FedRAMP Moderate Equivalency & DFARS 7012 10.2 External Service Providers (ESPs/MSPs/MSSPs) & Shared Responsibility Matrices 10.3 Subcontractor Flow-Down, Supply Chain Governance & SPRS Scoring
11 Chapter 11: CMMC Assessment Process (CAP): Planning & Evidence Gathering
11.1 CAP Preliminary Proceedings & Phase 1 Pre-Assessment 11.2 CAP Phase 2: Assess Conformity to Security Requirements 11.3 Assessment Objectives, Evidence Sufficiency & Limited Correction
12 Chapter 12: CMMC Assessment Process (CAP): Reporting, POA&M & Closeout
12.1 CAP Phase 3: Complete and Report Assessment Results 12.2 Level 2 POA&M Rules, Exclusions & 180-Day Closeout 12.3 CAP Phase 4: Certificate Issuance & POA&M Closeout
1.2 Eligibility, Training, Retakes & Certification Maintenance
Key Takeaways Explain This Topic AI
Candidates must complete the mandatory CCP course through an ISACA Approved Training Provider before testing.
Current exam fees are US$575 for ISACA members and US$760 for nonmembers; the certification application fee after passing is US$200.
Exam eligibility lasts six months, and each failed attempt requires a new full-fee registration after the applicable 30-, 90-, or 90-day wait.
Certification requires an accepted education-or-experience pathway, a favorable Tier 3 determination, the ethics commitment, and an approved application.
Maintenance requires at least 20 CPE hours each year and 120 total CPE hours during the three-year cycle.
Last updated: August 2026
1.2 Eligibility, Training, Retakes & Certification Maintenance
The CCP pathway has two distinct gates: exam eligibility and certification eligibility . Completing training authorizes a candidate to register and test; passing the exam does not by itself create an active credential. The candidate must then satisfy the application, experience or education, background, ethics, and maintenance requirements published by ISACA.
Before the exam
The current program requires completion of the official CCP course through an ISACA Approved Training Provider (ATP) . The ATP uses approved courseware and reports completion through the credentialing process. Self-study can reinforce the course but does not substitute for the mandatory training prerequisite.
After the prerequisite is accepted, exam registration eligibility is valid for six months . The candidate should schedule early enough to allow for PSI availability, identification issues, and possible rescheduling. Current delivery is through PSI, either at a test center or by remote proctoring. Use the current candidate guide for appointment changes and exam-day rules rather than relying on a provider's old instructions.
Current fees and score result
- Item Current published fee
- CCP exam, ISACA member US$575 per attempt
- CCP exam, nonmember US$760 per attempt
- Certification application after passing US$200
- ATP course Set by the provider; not included in the exam fee
Every retake is a new full-fee exam registration at the candidate's then-current member status. The 200–800 scaled score uses 450 as the passing point. A failed result does not create partial certification, and an exam fee does not include the separate certification application.
Retake timing
ISACA permits up to four attempts in a rolling twelve-month period , including the first attempt. After the first failure, the candidate waits 30 days . After a second failure, the wait is 90 days . After a third failure, the wait is another 90 days . A candidate does not have to repeat the ATP course merely because of the first or second failure unless ISACA separately changes the prerequisite policy. The prudent response to a failed attempt is to use the score report to identify weak domains, rebuild the source-document map, and practice scenarios during the mandatory wait.
Applying for certification
Passing establishes the exam component. The current application also requires:
The qualifying education-or-experience basis: a cybersecurity or information-technology college degree, or at least two years of related education, or at least two years of related work experience, including qualifying military experience.
A completed certification application and the US$200 application fee.
A favorable Tier 3 background investigation or determination as required by the program. Do not assume that any commercial background check or any clearance automatically substitutes; ISACA and the responsible government process determine acceptability.
Agreement to the applicable professional ethics and continuing-certification requirements.
The role may expose a professional to proprietary security information and assessment records. That explains the screening requirement, but it does not make a CCP a cleared government employee and does not authorize access to classified or export-controlled information. Access remains governed by the data, contract, facility, citizenship or export rules, need to know, and the person's actual authorization.
Maintaining the credential
The CCP certification cycle is three years . A holder must earn at least 20 continuing professional education hours in each year and 120 total hours over the three-year cycle . The annual minimum is a floor, not the total requirement: three years at only 20 hours produces 60 and therefore does not satisfy 120. Plan approximately 40 hours per year while preserving the 20-hour yearly minimum.
CPE activities must be relevant and documented under ISACA's current policy. Examples may include approved training, professional education, teaching, research, or service when the policy recognizes the activity. Keep certificates, agendas, dates, providers, subject matter, and claimed hours because reported CPE may be audited. The holder must also maintain required fees and ethics attestations under the current policy; confirm fee amounts at renewal because they can change.
A practical pathway
A sound sequence is: select an ATP; complete the required course; confirm the six-month eligibility window; register with the correct ISACA member status; review PSI rules; pass at 450 or higher; collect education or experience documentation; submit the certification application; complete Tier 3 processing; then establish a three-year CPE calendar. Do not advertise an active CCP solely on the basis of course completion or a passing exam. Use the exact status reflected by ISACA.
Finally, separate individual certification from organizational qualification. A CCP certification does not turn an employer into a C3PAO, authorize the employer to issue certificates, or eliminate conflicts from consulting work. Those questions are governed by 32 CFR part 170, Cyber AB accreditation, CAP, and the Code of Professional Conduct.