Study guide

11.1 Training Needs Analysis & Competency Modeling

ASQ Certified Manager of Quality/Organizational Excellence CMQ/OE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 0: Introduction & Exam Overview

0.1 Current CMQ/OE Exam Facts 0.2 Study Strategy by BoK Weight

2 Chapter 1: Leadership Principles & Organizational Structures

1.1 Leadership Theories & Styles 1.2 Organizational Structures & Matrix Management 1.3 Change Management Models & Strategies 1.4 Organizational Culture & Quality Governance

3 Chapter 2: Teams, Facilitation & Ethics

2.1 Team Formation & Development Stages 2.2 Facilitation Techniques & Team Empowerment 2.3 Conflict Resolution & Negotiation Strategies 2.4 ASQ Code of Ethics & Legal Compliance

4 Chapter 3: Strategic Planning & Environmental Analysis

3.1 Strategic Planning Models & Environmental Scans 3.2 Strategic Risk Management & Scenario Planning 3.3 Portfolio Management & Strategic Project Alignment

5 Chapter 4: Policy Deployment & Performance Alignment

4.1 Hoshin Kanri & Catchball Process 4.2 Benchmarking & Competitive Analysis 4.3 Knowledge Management & Best Practice Transfer

6 Chapter 5: Quality Management Systems & Cost of Quality

5.1 Quality Management System (QMS) Frameworks 5.2 Cost of Quality (COQ) Models 5.3 Process Management & Business Process Reengineering 5.4 Management Theories, Styles & Emotional Intelligence 5.5 Communication Skills for Quality Managers 5.6 Project Management for Quality Leaders

7 Chapter 6: Quality Improvement Frameworks & Auditing

6.1 Continuous Improvement Frameworks 6.2 Quality Auditing & Compliance Management 6.3 Measurement Systems & Key Performance Indicators

8 Chapter 7: Seven Basic & Management Quality Tools

7.1 The Seven Basic Quality Tools 7.2 The Seven Management & Planning Tools

9 Chapter 8: Advanced Problem Solving & Risk Analysis

8.1 Failure Mode and Effects Analysis (FMEA) 8.2 Quality Function Deployment (QFD) & House of Quality 8.3 Statistical Process Control & Process Capability 8.4 Lean Tools & Theory of Constraints 8.5 Sampling, MSA & Reliability Terminology

10 Chapter 9: Customer-Focused Organizations & VOC

9.1 Voice of the Customer & Kano Model 9.2 Customer Satisfaction, Loyalty & NPS Metrics 9.3 Customer Relationship Management & Complaint Resolution 9.4 Internal Customers, Segmentation & Multi-Customer Management

11 Chapter 10: Supply Chain Quality Management

10.1 Supplier Qualification, Selection & Evaluation 10.2 Supply Chain Risk Management & Logistics Alignment 10.3 Supplier Audits & Scorecard Systems 10.4 Supplier Risk Management & Communications

12 Chapter 11: Training and Workforce Development

11.1 Training Needs Analysis & Competency Modeling 11.2 Adult Learning Principles & Instructional Design 11.3 Training Program Evaluation & Effectiveness Tracking

11.1 Training Needs Analysis & Competency Modeling

Key Takeaways Explain This Topic AI

McGehee and Thayer's Three-Level TNA Model evaluates training needs systematically across Organizational, Task/Job, and Individual performance levels.

Quantitative skill gap identification uses the formula: Skill Gap = Required Competency Level - Current Competency Level, typically rated on a 1-to-5 ordinal proficiency scale.

Competency matrices map job roles against required Knowledge, Skills, and Abilities (KSAs), providing a baseline for compliance, cross-training, and risk management.

Effective TNA triangulates data from quantitative quality metrics (scrap rates, audit non-conformances) and qualitative assessments (interviews, direct observation).

ISO 9001:2015 Clause 7.2 requires organizations to determine necessary competence, ensure personnel are competent, take actions to acquire competence, and retain documented evidence.

Last updated: July 2026

11.1 Training Needs Analysis & Competency Modeling

Quick Summary: Training Needs Analysis (TNA) is a systematic, data-driven approach to identifying performance gaps and determining whether training is the correct intervention. Using McGehee and Thayer's three-level model—Organizational, Task, and Individual—quality managers establish competency matrices, quantify skill gaps, and ensure compliance with quality management standards like ISO 9001:2015 Clause 7.2.

In quality management and organizational excellence, training is an investment intended to build capability, ensure process capability, and reduce operational risk. However, delivering training without a rigorous Training Needs Analysis (TNA) often leads to wasted resources, misaligned instruction, and unaddressed root causes. TNA serves as the essential diagnostic phase that determines who needs training, what skills or knowledge are lacking, and whether training is even the appropriate remedy for a performance defect.

The Three Levels of Training Needs Analysis

First conceptualized by McGehee and Thayer, comprehensive TNA evaluates organizational needs across three distinct, interconnected levels. Skipping any level compromises the alignment between human performance and organizational strategy.

1. Organizational Level Analysis

Organizational analysis examines the macro environment to determine where training is needed and under what conditions it will occur. It aligns training initiatives with strategic business objectives, organizational goals, and resource constraints.

Strategic Alignment: Does the training support corporate imperatives, such as launching a new product line, achieving ISO 9001 certification, or reducing Cost of Poor Quality (COPQ)?

Resource Availability: Are budget, equipment, facilities, and leadership support available to sustain the program?

Organizational Climate: Does the culture support learning transfer, or do systemic barriers (e.g., lack of manager support, time pressures) impede performance?

Quality & Operational Metrics: Analysis of macro metrics such as first-pass yield (FPY), customer satisfaction indices, scrap rates, and regulatory compliance audit trends.

2. Task / Job Level Analysis

Task analysis (also known as role or job analysis) determines the specific knowledge, skills, abilities, and behavioral traits required to perform a job effectively to standard operating procedure (SOP) specifications.

Duties and Task Breakdown: Identifying critical job responsibilities and step-by-step tasks.

KSA Requirements:

Knowledge: Theoretical understanding (e.g., statistical principles behind Control Charts).

Skills: Practical psychomotor or technical execution (e.g., operating a Coordinate Measuring Machine).

Abilities: Enduring capacity to perform a function (e.g., visual inspection acuity, spatial reasoning).

Performance Standards: Defining benchmark criteria for speed, error thresholds, and safety compliance.

3. Individual Level Analysis

Individual analysis identifies which specific employees require training and what specific competencies they must acquire. It compares an individual's current performance against established job standards.

Performance Gap Identification: Diagnostic evaluations, proficiency tests, and supervisor appraisals.

Root Cause Determination: Assessing whether a performance deficiency stems from a lack of skill/knowledge, or non-training factors like broken tooling, ambiguous SOPs, or poor motivation.

Learner Readiness: Evaluating prerequisites, prior experience, and learning preferences.

Summary of TNA Levels

Level of Analysis Primary Focus Key Data Sources Typical Outcome

Organizational Strategic goals, quality culture, macro performance Strategic plans, COPQ reports, audit results, yield metrics Identification of priority operational areas for workforce investment

Task / Job SOP compliance, KSA requirements, task standards Job descriptions, process maps, FMEAs, task observations Detailed competency profiles and task specification catalogs

Individual Employee performance gaps, individual proficiency Skill assessments, 360-degree reviews, scrap logs Personalized training plans and skill gap scores

Competency Modeling & Matrix Architecture

A Competency Model is a structured framework defining the combination of knowledge, skills, abilities, and behaviors necessary for superior performance within an organization. In quality management, competency models are operationalized using a Competency Matrix (also called a Skill Matrix).

Designing a Competency Matrix

A Competency Matrix is a visual management tool that maps specific job roles (rows) against required technical and quality competencies (columns). Proficiency is measured using a standardized ordinal scale, typically from Level 1 to Level 5:

Level 1 (Novice / Trainee): Basic awareness; requires direct supervision and step-by-step guidance.

Level 2 (Supervised Practitioner): Understands fundamentals; can perform routine tasks with minimal supervision.

Level 3 (Autonomous / Competent): Fully capable; executes tasks independently to standard quality requirements.

Level 4 (Proficient / Coach): Deep expertise; capable of troubleshooting exceptions and coaching/training others.

Level 5 (Master / Expert): Recognized domain authority; leads process design, standard creation, and continuous improvement.

Quantifying Skill Gaps

The skill gap is calculated using a simple quantitative formula: Skill Gap = Required Competency Level − Current Competency Level \text{Skill Gap} = \text{Required Competency Level} - \text{Current Competency Level} Skill Gap = Required Competency Level − Current Competency Level

If the required competency level for an Autonomous Quality Technician operating an Optical Comparator is Level 3 , and the current employee evaluates at Level 1 , the resulting skill gap score is +2 . Any positive integer represents a target for training intervention. Skill Gap Risk Matrix:

  • High Risk: Gap >= 2 in Critical Control Point (CCP) task
  • Med Risk: Gap == 1 in Critical Control Point task
  • Low Risk: Gap <= 1 in non-critical supporting task
  • TNA Data Collection Methodologies

To ensure objectivity, quality managers must triangulate data from multiple quantitative and qualitative sources:

Quantitative Quality Data: Reviewing internal audit non-conformances, scrap/rework tracking software, customer return data, and Statistical Process Control (SPC) out-of-control signals.

Structured Skill Assessments: Written examinations, hands-on practical skill demonstrations, and standardized work observations.

Surveys & Focus Groups: Gathering structured feedback from department heads, supervisors, and front-line operators regarding perceived operational bottlenecks.

Direct Observation: Conducting Gemba walks to observe operators executing standardized work in their actual work environment.

ISO 9001:2015 Requirements for Competence (Clause 7.2)

Under international quality management standards, training is explicitly framed around competence . ISO 9001:2015 Clause 7.2 mandates that the organization shall:

Determine the necessary competence of person(s) doing work under its control that affects the performance and effectiveness of the quality management system.

Ensure that these persons are competent on the basis of appropriate education, training, or experience.

Where applicable, take actions to acquire the necessary competence, and evaluate the effectiveness of the actions taken.

Retain appropriate documented information as evidence of competence.

CMQ/OE Exam Tip: The exam frequently tests your ability to distinguish between a training problem and a system/process problem . Training can only fix deficiencies in knowledge, skill, or attitude. If poor performance is caused by defective raw materials, ambiguous written procedures, inadequate lighting, or outdated machinery, training the operator will fail. Always verify root cause before prescribing training!

Practical Example: Precision CNC Machining Line TNA

A medical device component manufacturer noticed a 4.2% scrap rate on a high-precision titanium implant line. The Quality Manager conducted a three-level TNA:

Organizational Level: Identified that scrap contributed to a $180,000 annual COPQ, threatening client delivery SLAs.

Task Level: Analyzed the CMM (Coordinate Measuring Machine) inspection routine and found that feature measurement required advanced GD&T (Geometric Dimensioning and Tolerancing) interpretation.

Individual Level: Assessed 8 quality inspectors. While 3 inspectors scored Level 4 (Proficient), 5 newer inspectors scored Level 2 (Supervised), creating a +2 skill gap in GD&T feature control interpretation.

Intervention: Rather than re-training the entire plant, targeted classroom and hands-on GD&T training was delivered exclusively to the 5 inspectors, dropping the line scrap rate from 4.2% to 0.6% within 30 days.

Loading diagram... Three-Level Training Needs Analysis & Competency Workflow