Study guide

12.2 Three-Dimensional Views and Cross-Sections

Gaokao Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Sets, Logic, and Algebraic Foundations

1.1 Sets and Set Operations 1.2 Propositional Logic and Quantifiers 1.3 Inequalities and Absolute Value Equations

2 Chapter 2: Functions and Fundamental Properties

2.1 Concept, Domain, Range, and Mapping of Functions 2.2 Monotonicity, Parity, and Periodicity of Functions 2.3 Function Graphs, Transformations, and Zeros

3 Chapter 3: Exponential, Logarithmic, and Power Functions

3.1 Exponents and Exponential Functions 3.2 Logarithms and Logarithmic Functions 3.3 Power Functions and Comparative Growth Rates

4 Chapter 4: Complex Numbers and Quadratic Function Views

4.1 Algebraic and Geometric Representations of Complex Numbers 4.2 Complex Number Operations and Equations 4.3 Quadratic Equations and Inequalities from a Function Viewpoint

5 Chapter 5: Trigonometric Functions and Identities

5.1 Angles, Radians, and Unit Circle Definitions 5.2 Trigonometric Identities and Reduction Formulas 5.3 Addition, Subtraction, and Double-Angle Formulas 5.4 Graphs and Properties of Sine, Cosine, and Tangent Functions

6 Chapter 6: Triangles and Trigonometric Applications

6.1 Sine Theorem, Cosine Theorem, and Triangle Area Formulas 6.2 Solving Triangles and Comprehensive Geometric Applications 6.3 Practical Measurement, Optimization, and Trigonometric Modeling

7 Chapter 7: Sequences and Series

7.1 Arithmetic Sequences and Sums 7.2 Geometric Sequences and Sums 7.3 Recurrence Relations and General Term Determination 7.4 Advanced Summation Techniques and Sequence Applications

8 Chapter 8: Plane Vectors

8.1 Vector Concepts, Addition, Subtraction, and Scalar Multiplication 8.2 Coordinate Operations of Vectors 8.3 Dot Products, Angles, Vector Projections, and Geometric Applications

9 Chapter 9: Lines and Circles in Cartesian Coordinates

9.1 Equations of Straight Lines and Positional Relationships 9.2 Standard and General Equations of Circles 9.3 Positional Relationships Between Lines and Circles

10 Chapter 10: Conic Sections: Ellipses

10.1 Standard Equations and Definitions of Ellipses 10.2 Geometric Properties of Ellipses (Vertices, Foci, Eccentricity) 10.3 Intersection of Lines and Ellipses and Chord Problems

11 Chapter 11: Conic Sections: Hyperbolas and Parabolas

11.1 Hyperbola Definitions, Standard Equations, and Asymptotes 11.2 Parabola Definitions, Standard Equations, and Focal Properties 11.3 Unified Properties of Conic Sections and Trajectory Problems

12 Chapter 12: Solid Geometry: Three-Dimensional Figures

12.1 Prisms, Pyramids, Cylinders, Cones, and Spheres 12.2 Three-Dimensional Views and Cross-Sections 12.3 Surface Area and Volume Calculations

13 Chapter 13: Spatial Lines, Planes, and Spatial Vectors

13.1 Positional Relationships of Lines and Planes in Space 13.2 Parallelism and Perpendicularity Proofs in Solid Geometry 13.3 Spatial Coordinates and Spatial Vector Operations 13.4 Using Spatial Vectors to Compute Angles and Distances

14 Chapter 14: Permutations, Combinations, and Binomial Theorem

14.1 Fundamental Counting Principles (Addition and Multiplication Rules) 14.2 Permutations and Combinations 14.3 Binomial Theorem, Expansion Terms, and Coefficients

15 Chapter 15: Probability and Statistics

15.1 Classical Probability and Conditional Probability 15.2 Independent Events and Repeated Bernoulli Trials 15.3 Discrete Random Variables, Probability Distributions, Expectation, and Variance 15.4 Normal Distribution, Statistical Sampling, Correlation, and Regression

16 Chapter 16: Derivatives and Mathematical Modeling

16.1 Limit Concepts and Derivatives of Elementary Functions 16.2 Tangent Lines, Derivatives, Monotonicity, and Extremum Analysis 16.3 Optimization Problems and Curve Sketching with Derivatives 16.4 Real-World Mathematical Modeling and Problem Solving

12.2 Three-Dimensional Views and Cross-Sections

Key Takeaways Explain This Topic AI

Orthographic projections (三视图) consist of the Front View (正视图), Side View (侧视图), and Top View (俯视图), adhering strictly to the alignment principle: 'Length aligned vertically, height aligned horizontally, width equal between top and side views' (长对正,高平齐,宽相等).

Visible edges in orthographic projections must be drawn as solid lines (实线), while hidden interior edges must be rendered as dashed lines (虚线).

Reconstructing 3D solids from three-dimensional views relies on the Bounding Cuboid Method (正方体/长方体切割法) and Grid Vertex Identification (网格顶点定点法).

Planar cross-sections (截面) of a cube can form triangles, quadrilaterals, pentagons, or hexagons (up to 6 sides), but never a heptagon (7 sides) or octagon, because a cube has only 6 faces.

Last updated: July 2026

Section 12.2: Three-Dimensional Views and Cross-Sections

Spatial representation and planar cuts of 3D figures are core testing points in Gaokao Mathematics. Mastering the relationship between three-dimensional solids and their two-dimensional orthographic projections or planar cross-sections requires systematic geometric rules and precise visualization techniques.

  • 1. Principles of Orthographic Projections (三视图)
  • 1.1 The Three Projection Planes and View Alignment

An orthographic projection projects a 3D figure orthogonally onto three mutually perpendicular planes:

Front View (正视图/主视图) : Projected onto the vertical plane V V V . Reflects the solid's width (length) and height .

Side View (侧视图/左视图) : Projected onto the profile plane W W W from the left. Reflects the solid's depth (width) and height .

Top View (俯视图) : Projected onto the horizontal plane H H H from above. Reflects the solid's width (length) and depth (width) .

1.2 Core Rules of Projection Alignment ("九字真言")

长对正 (Length Aligned) : The length in the Front View and Top View must align vertically.

高平齐 (Height Level) : The height in the Front View and Side View must match horizontally.

宽相等 (Width Equal) : The width (depth) in the Top View and Side View must be identical.

1.3 Solid vs. Dashed Line Representation

Solid Line (实线) : Represents boundary edges or intersections that are directly visible from the line of sight.

Dashed Line (虚线) : Represents hidden boundary edges or internal structural lines blocked by opaque front features.

2. Reconstructing 3D Solids from Three Views (三视图还原几何体)

To compute volumes, surface areas, or edge lengths from orthographic views, use the Bounding Cuboid Grid Method (长方体网格法) :

Step 1: Construct the Bounding Box : Draw a standard rectangular cuboid A B C D − A 1 B 1 C 1 D 1 ABCD-A_1B_1C_1D_1 A BC D − A 1 ​ B 1 ​ C 1 ​ D 1 ​ whose dimensions ( L , W , H ) (L, W, H) ( L , W , H ) match the maximum dimensions given in the three views.

Step 2: Plot View Features on Faces :

Overlay the Front View onto the front face A B B 1 A 1 ABB_1A_1 A B B 1 ​ A 1 ​ .

Overlay the Side View onto the left face A D D 1 A 1 ADD_1A_1 A D D 1 ​ A 1 ​ .

Overlay the Top View onto the top face A 1 B 1 C 1 D 1 A_1B_1C_1D_1 A 1 ​ B 1 ​ C 1 ​ D 1 ​ or base A B C D ABCD A BC D .

Step 3: Connect Vertices and Prune :

Identify candidate 3D vertices by finding intersection points of projecting lines.

Eliminate vertices and edges that produce extra projection lines not present in the given views.

Verify solid vs. dashed lines for all three projections.

  • 3. Planar Cross-Sections of 3D Solids (截面问题)
  • 3.1 Definition and Core Principles

A cross-section (截面) is the planar polygon formed by the intersection of a cutting plane α \alpha α with the faces of a polyhedron.

Intersection Theorem for Parallel Planes : If a cutting plane α \alpha α intersects two parallel planes β 1 \beta_1 β 1 ​ and β 2 \beta_2 β 2 ​ along lines l 1 l_1 l 1 ​ and l 2 l_2 l 2 ​ , then l 1 ∥ l 2 l_1 \parallel l_2 l 1 ​ ∥ l 2 ​ .

Maximum Polygon Sides : A cutting plane intersecting a polyhedron with F F F faces can yield a cross-sectional polygon with at most F F F sides. For a cube ( F = 6 F = 6 F = 6 ), cross-sections can be triangles, quadrilaterals, pentagons, or hexagons, but never heptagons ( 7 7 7 ) or octagons ( 8 8 8 ) .

3.2 Sphere and Cone Cross-Sections

Cross-Section of a Sphere : Any planar cut of a sphere with radius R R R at distance d d d ( 0 ≤ d < R 0 \le d < R 0 ≤ d < R ) from the center O O O is a circle with radius: r section = R 2 − d 2 r_{\text{section}} = \sqrt{R^2 - d^2} r section ​ = R 2 − d 2 ​ Area of Section: S section = π ( R 2 − d 2 ) \text{Area of Section: } S_{\text{section}} = \pi (R^2 - d^2) Area of Section: S section ​ = π ( R 2 − d 2 )

Cross-Sections of a Cone :

Plane ⊥ \perp ⊥ axis ⟹ \implies ⟹ Circle.

Plane passing through apex ⟹ \implies ⟹ Isosceles Triangle.

Plane parallel to one generator ⟹ \implies ⟹ Parabola segment.

Plane inclined to axis (not passing through apex) ⟹ \implies ⟹ Ellipse or Hyperbola branch.

  • 4. Worked Gaokao Exam Examples
  • Example 1: Volume and Edge Analysis from Three Views

Problem : The three views of a geometric solid built inside a unit cube of edge length 1 1 1 are shown:

Front View: A right isosceles triangle with legs 1 , 1 1, 1 1 , 1 .

Side View: A right isosceles triangle with legs 1 , 1 1, 1 1 , 1 .

Top View: A square of side length 1 1 1 .

Determine the shape of the solid, compute its volume V V V , and find the maximum edge length among all its edges.

Detailed Solution :

Reconstruct the 3D Solid : Place the solid inside a unit cube A B C D − A 1 B 1 C 1 D 1 ABCD-A_1B_1C_1D_1 A BC D − A 1 ​ B 1 ​ C 1 ​ D 1 ​ with base A B C D ABCD A BC D on the bottom.

Top View is a square of side 1 ⟹ 1 \implies 1 ⟹ The projection on the base A B C D ABCD A BC D covers the entire square A B C D ABCD A BC D .

Front View and Side View are right triangles with legs 1 ⟹ 1 \implies 1 ⟹ All lateral faces slope to a single apex P P P located directly above vertex A A A , i.e., apex P = A 1 P = A_1 P = A 1 ​ .

The solid is a square pyramid A 1 − A B C D A_1-ABCD A 1 ​ − A BC D , where lateral edge A 1 A ⊥ A_1A \perp A 1 ​ A ⊥ base A B C D ABCD A BC D .

Compute Volume : V = 1 3 S base ⋅ h = 1 3 ⋅ ( 1 × 1 ) ⋅ 1 = 1 3 V = \frac{1}{3} S_{\text{base}} \cdot h = \frac{1}{3} \cdot (1 \times 1) \cdot 1 = \frac{1}{3} V = 3 1 ​ S base ​ ⋅ h = 3 1 ​ ⋅ ( 1 × 1 ) ⋅ 1 = 3 1 ​

Analyze Edge Lengths :

Base edges: A B = B C = C D = D A = 1 AB = BC = CD = DA = 1 A B = BC = C D = D A = 1 .

Vertical edge: A 1 A = 1 A_1A = 1 A 1 ​ A = 1 .

Adjacent lateral edges: A 1 B = A 1 A 2 + A B 2 = 1 2 + 1 2 = 2 A_1B = \sqrt{A_1A^2 + AB^2} = \sqrt{1^2 + 1^2} = \sqrt{2} A 1 ​ B = A 1 ​ A 2 + A B 2 ​ = 1 2 + 1 2 ​ = 2 ​ , and A 1 D = 1 2 + 1 2 = 2 A_1D = \sqrt{1^2 + 1^2} = \sqrt{2} A 1 ​ D = 1 2 + 1 2 ​ = 2 ​ .

Longest lateral diagonal edge: A 1 C = A 1 A 2 + A C 2 = 1 2 + ( 2 ) 2 = 3 A_1C = \sqrt{A_1A^2 + AC^2} = \sqrt{1^2 + (\sqrt{2})^2} = \sqrt{3} A 1 ​ C = A 1 ​ A 2 + A C 2 ​ = 1 2 + ( 2 ​ ) 2 ​ = 3 ​ .

Maximum edge length is 3 \sqrt{3} 3 ​ .

Example 2: Planar Cross-Section of a Sphere

Problem : A sphere O O O has radius R = 5 R = 5 R = 5 . A cutting plane α \alpha α passes through a point P P P inside the sphere such that the distance from the sphere center O O O to point P P P is O P = 3 OP = 3 OP = 3 . Find the minimum possible area and maximum possible area of the circular cross-section formed by α \alpha α passing through P P P .

Detailed Solution :

Maximum Section Area : Occurs when plane α \alpha α passes through the sphere center O O O (great circle, d = 0 d = 0 d = 0 ). Since P P P lies on α \alpha α , a plane passing through O O O and P P P has distance d min ⁡ = 0 d_{\min} = 0 d m i n ​ = 0 . S max ⁡ = π R 2 = π ( 5 2 ) = 25 π S_{\max} = \pi R^2 = \pi (5^2) = 25\pi S m a x ​ = π R 2 = π ( 5 2 ) = 25 π

Minimum Section Area : Occurs when plane α \alpha α is perpendicular to line segment O P OP OP . In this case, the distance from center O O O to plane α \alpha α is d max ⁡ = O P = 3 d_{\max} = OP = 3 d m a x ​ = OP = 3 . r min ⁡ = R 2 − d max ⁡ 2 = 5 2 − 3 2 = 25 − 9 = 16 = 4 r_{\min} = \sqrt{R^2 - d_{\max}^2} = \sqrt{5^2 - 3^2} = \sqrt{25 - 9} = \sqrt{16} = 4 r m i n ​ = R 2 − d m a x 2 ​ ​ = 5 2 − 3 2 ​ = 25 − 9 ​ = 16 ​ = 4 S min ⁡ = π ( r min ⁡ ) 2 = π ( 4 2 ) = 16 π S_{\min} = \pi (r_{\min})^2 = \pi (4^2) = 16\pi S m i n ​ = π ( r m i n ​ ) 2 = π ( 4 2 ) = 16 π

The cross-sectional area S S S satisfies 16 π ≤ S ≤ 25 π 16\pi \le S \le 25\pi 16 π ≤ S ≤ 25 π .

5. Reconstruction Workflow Visualization

Loading diagram... 3D Solid Reconstruction Decision Workflow