Study guide

13.1 Positional Relationships of Lines and Planes in Space

Gaokao Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Sets, Logic, and Algebraic Foundations

1.1 Sets and Set Operations 1.2 Propositional Logic and Quantifiers 1.3 Inequalities and Absolute Value Equations

2 Chapter 2: Functions and Fundamental Properties

2.1 Concept, Domain, Range, and Mapping of Functions 2.2 Monotonicity, Parity, and Periodicity of Functions 2.3 Function Graphs, Transformations, and Zeros

3 Chapter 3: Exponential, Logarithmic, and Power Functions

3.1 Exponents and Exponential Functions 3.2 Logarithms and Logarithmic Functions 3.3 Power Functions and Comparative Growth Rates

4 Chapter 4: Complex Numbers and Quadratic Function Views

4.1 Algebraic and Geometric Representations of Complex Numbers 4.2 Complex Number Operations and Equations 4.3 Quadratic Equations and Inequalities from a Function Viewpoint

5 Chapter 5: Trigonometric Functions and Identities

5.1 Angles, Radians, and Unit Circle Definitions 5.2 Trigonometric Identities and Reduction Formulas 5.3 Addition, Subtraction, and Double-Angle Formulas 5.4 Graphs and Properties of Sine, Cosine, and Tangent Functions

6 Chapter 6: Triangles and Trigonometric Applications

6.1 Sine Theorem, Cosine Theorem, and Triangle Area Formulas 6.2 Solving Triangles and Comprehensive Geometric Applications 6.3 Practical Measurement, Optimization, and Trigonometric Modeling

7 Chapter 7: Sequences and Series

7.1 Arithmetic Sequences and Sums 7.2 Geometric Sequences and Sums 7.3 Recurrence Relations and General Term Determination 7.4 Advanced Summation Techniques and Sequence Applications

8 Chapter 8: Plane Vectors

8.1 Vector Concepts, Addition, Subtraction, and Scalar Multiplication 8.2 Coordinate Operations of Vectors 8.3 Dot Products, Angles, Vector Projections, and Geometric Applications

9 Chapter 9: Lines and Circles in Cartesian Coordinates

9.1 Equations of Straight Lines and Positional Relationships 9.2 Standard and General Equations of Circles 9.3 Positional Relationships Between Lines and Circles

10 Chapter 10: Conic Sections: Ellipses

10.1 Standard Equations and Definitions of Ellipses 10.2 Geometric Properties of Ellipses (Vertices, Foci, Eccentricity) 10.3 Intersection of Lines and Ellipses and Chord Problems

11 Chapter 11: Conic Sections: Hyperbolas and Parabolas

11.1 Hyperbola Definitions, Standard Equations, and Asymptotes 11.2 Parabola Definitions, Standard Equations, and Focal Properties 11.3 Unified Properties of Conic Sections and Trajectory Problems

12 Chapter 12: Solid Geometry: Three-Dimensional Figures

12.1 Prisms, Pyramids, Cylinders, Cones, and Spheres 12.2 Three-Dimensional Views and Cross-Sections 12.3 Surface Area and Volume Calculations

13 Chapter 13: Spatial Lines, Planes, and Spatial Vectors

13.1 Positional Relationships of Lines and Planes in Space 13.2 Parallelism and Perpendicularity Proofs in Solid Geometry 13.3 Spatial Coordinates and Spatial Vector Operations 13.4 Using Spatial Vectors to Compute Angles and Distances

14 Chapter 14: Permutations, Combinations, and Binomial Theorem

14.1 Fundamental Counting Principles (Addition and Multiplication Rules) 14.2 Permutations and Combinations 14.3 Binomial Theorem, Expansion Terms, and Coefficients

15 Chapter 15: Probability and Statistics

15.1 Classical Probability and Conditional Probability 15.2 Independent Events and Repeated Bernoulli Trials 15.3 Discrete Random Variables, Probability Distributions, Expectation, and Variance 15.4 Normal Distribution, Statistical Sampling, Correlation, and Regression

16 Chapter 16: Derivatives and Mathematical Modeling

16.1 Limit Concepts and Derivatives of Elementary Functions 16.2 Tangent Lines, Derivatives, Monotonicity, and Extremum Analysis 16.3 Optimization Problems and Curve Sketching with Derivatives 16.4 Real-World Mathematical Modeling and Problem Solving

13.1 Positional Relationships of Lines and Planes in Space

Key Takeaways Explain This Topic AI

Four fundamental axioms establish the geometric foundation of 3D space: three non-collinear points determine a unique plane; a line with two points in a plane lies entirely in that plane; the intersection of two non-parallel intersecting planes is a single line; and parallel lines in space satisfy transitivity.

Positional relationships between two straight lines in space fall into three categories: intersecting (coplanar with 1 common point), parallel (coplanar with 0 common points), and skew (non-coplanar with 0 common points).

The angle between two skew lines is defined by translating one or both lines to intersect at a common point, yielding an acute or right angle θ ∈ ( 0 , π / 2 ] \theta \in (0, \pi/2] θ ∈ ( 0 , π /2 ] .

A straight line and a plane can be in one of three positions: lying in the plane ( a ⊂ α a \subset \alpha a ⊂ α ), parallel to the plane ( a ∥ α a \parallel \alpha a ∥ α ), or intersecting the plane ( a ∩ α = { P } a \cap \alpha = \{P\} a ∩ α = { P } ).

Two planes in space are either parallel ( α ∥ β \alpha \parallel \beta α ∥ β , no common points) or intersecting ( α ∩ β = l \alpha \cap \beta = l α ∩ β = l , infinitely many points forming a straight line).

Last updated: July 2026

13.1 Positional Relationships of Lines and Planes in Space

Solid geometry extends plane synthetic geometry into three-dimensional Euclidean space R 3 \mathbb{R}^3 R 3 . To rigorously analyze spatial figures, Gaokao Mathematics establishes a formal axiomatic framework. Understanding positional relationships between spatial lines and planes forms the prerequisite for parallelism proofs, perpendicularity proofs, and spatial vector calculations.

1. Axiomatic Foundation of Solid Geometry

Euclidean solid geometry rests on four basic axioms that define how points, lines, and planes interact in space:

Axiom 1 (Plane Determination): Three non-collinear points determine one and only one plane.

Symbolic Representation: If A , B , C A, B, C A , B , C are not on the same straight line, there exists a unique plane α \alpha α such that A , B , C ∈ α A, B, C \in \alpha A , B , C ∈ α .

Corollaries: A unique plane is also uniquely determined by: (1) A straight line and a point outside it; (2) Two intersecting straight lines; (3) Two parallel straight lines.

Axiom 2 (Line-Plane Incidence): If two distinct points of a straight line lie in a plane, then the entire straight line lies within that plane.

Symbolic Representation: If A ∈ l A \in l A ∈ l , B ∈ l B \in l B ∈ l , A ∈ α A \in \alpha A ∈ α , and B ∈ α B \in \alpha B ∈ α (where A ≠ B A \neq B A  = B ), then l ⊂ α l \subset \alpha l ⊂ α .

Axiom 3 (Plane Intersection): If two distinct planes share a common point, then they share a unique straight line passing through that point, which is their intersection line.

Symbolic Representation: If P ∈ α P \in \alpha P ∈ α and P ∈ β P \in \beta P ∈ β (where α ≠ β \alpha \neq \beta α  = β ), then α ∩ β = l \alpha \cap \beta = l α ∩ β = l such that P ∈ l P \in l P ∈ l .

Axiom 4 (Transitivity of Spatial Parallelism): Two straight lines parallel to a third straight line in space are parallel to each other.

Symbolic Representation: If a ∥ b a \parallel b a ∥ b and b ∥ c b \parallel c b ∥ c , then a ∥ c a \parallel c a ∥ c .

2. Positional Relationships Between Two Lines in Space

Two distinct straight lines a a a and b b b in three-dimensional space can be classified according to whether they lie in a common plane and the number of points they share:

Positional Relationship Coplanar? Number of Common Points Geometric Feature

Intersecting Lines Yes (Coplanar) Exactly 1 point Form an angle θ ∈ ( 0 , π / 2 ] \theta \in (0, \pi/2] θ ∈ ( 0 , π /2 ]

  • Parallel Lines Yes (Coplanar) 0 points Same direction, constant separation
  • Skew Lines (异面直线) No (Non-coplanar) 0 points Do not intersect and are not parallel
  • Angle Between Two Skew Lines

Definition: Given two skew lines a a a and b b b , choose any arbitrary point O O O in space. Draw line a ′ ∥ a a' \parallel a a ′ ∥ a and line b ′ ∥ b b' \parallel b b ′ ∥ b through O O O . The acute angle or right angle θ \theta θ formed by the intersecting lines a ′ a' a ′ and b ′ b' b ′ is defined as the angle between the skew lines a a a and b b b .

Range: θ ∈ ( 0 ∘ , 90 ∘ ] \theta \in (0^\circ, 90^\circ] θ ∈ ( 0 ∘ , 9 0 ∘ ] , or in radians θ ∈ ( 0 , π 2 ] \theta \in \left(0, \frac{\pi}{2}\right] θ ∈ ( 0 , 2 π ​ ] .

Perpendicular Skew Lines: If θ = 90 ∘ \theta = 90^\circ θ = 9 0 ∘ , lines a a a and b b b are said to be mutually perpendicular skew lines, denoted a ⊥ b a \perp b a ⊥ b .

Equal Angles Theorem (等角定理): If two angles in space have their corresponding arms parallel and oriented in the same (or opposite) direction, then the two angles are equal (or supplementary).

3. Positional Relationships Between a Line and a Plane

A line a a a and a plane α \alpha α in space have three mutually exclusive positional relationships:

Line lies in the plane ( a ⊂ α a \subset \alpha a ⊂ α ): Every point on line a a a lies in plane α \alpha α . There are infinitely many common points.

Line is parallel to the plane ( a ∥ α a \parallel \alpha a ∥ α ): Line a a a and plane α \alpha α share no common points ( a ∩ α = ∅ a \cap \alpha = \emptyset a ∩ α = ∅ ).

Line intersects the plane ( a ∩ α = { P } a \cap \alpha = \{P\} a ∩ α = { P } ): Line a a a and plane α \alpha α share exactly one common point P P P .

If line a a a is perpendicular to every line in plane α \alpha α , a a a is perpendicular to α \alpha α ( a ⊥ α a \perp \alpha a ⊥ α ). Otherwise, a a a intersects α \alpha α obliquely.

4. Positional Relationships Between Two Planes

Two distinct planes α \alpha α and β \beta β in space exhibit two fundamental relationships:

Parallel Planes ( α ∥ β \alpha \parallel \beta α ∥ β ): The two planes share no common points ( α ∩ β = ∅ \alpha \cap \beta = \emptyset α ∩ β = ∅ ).

Intersecting Planes ( α ∩ β = l \alpha \cap \beta = l α ∩ β = l ): The two planes intersect along a unique straight line l l l . The region bounded by two intersecting half-planes sharing line l l l is called a dihedral angle (二面角), denoted α − l − β \alpha-l-\beta α − l − β .

  • 5. Classic Gaokao Worked Example
  • Problem

In a standard unit cube A B C D − A 1 B 1 C 1 D 1 ABCD-A_1B_1C_1D_1 A BC D − A 1 ​ B 1 ​ C 1 ​ D 1 ​ with edge length 1 1 1 :

Determine the positional relationship between line A 1 B A_1B A 1 ​ B and line B 1 C B_1C B 1 ​ C .

Compute the exact angle between the skew lines A 1 B A_1B A 1 ​ B and B 1 C B_1C B 1 ​ C .

Solution

Positional Relationship: Notice that A 1 , B , B 1 , C A_1, B, B_1, C A 1 ​ , B , B 1 ​ , C are four vertices of the cube. Line A 1 B A_1B A 1 ​ B lies in the left face A B B 1 A 1 ABB_1A_1 A B B 1 ​ A 1 ​ , while line B 1 C B_1C B 1 ​ C lies in the right face B C C 1 B 1 BCC_1B_1 BC C 1 ​ B 1 ​ . If A 1 B A_1B A 1 ​ B and B 1 C B_1C B 1 ​ C were coplanar, all four points A 1 , B , B 1 , C A_1, B, B_1, C A 1 ​ , B , B 1 ​ , C would lie in one plane. However, C ∉ C \notin C ∈ / plane A B B 1 A 1 ABB_1A_1 A B B 1 ​ A 1 ​ . Furthermore, A 1 B A_1B A 1 ​ B and B 1 C B_1C B 1 ​ C are not parallel because A 1 B ⃗ = ( 0 , 1 , − 1 ) \vec{A_1B} = (0, 1, -1) A 1 ​ B ​ = ( 0 , 1 , − 1 ) and B 1 C ⃗ = ( − 1 , 0 , − 1 ) \vec{B_1C} = (-1, 0, -1) B 1 ​ C ​ = ( − 1 , 0 , − 1 ) in a standard coordinate frame. Thus, A 1 B A_1B A 1 ​ B and B 1 C B_1C B 1 ​ C are skew lines .

Calculating the Angle via Synthetic Translation:

Observe that in the face A 1 B 1 C 1 D 1 A_1B_1C_1D_1 A 1 ​ B 1 ​ C 1 ​ D 1 ​ , A 1 D 1 ∥ B 1 C 1 A_1D_1 \parallel B_1C_1 A 1 ​ D 1 ​ ∥ B 1 ​ C 1 ​ and A 1 D 1 = B 1 C 1 A_1D_1 = B_1C_1 A 1 ​ D 1 ​ = B 1 ​ C 1 ​ . In face A B C D ABCD A BC D , B C ∥ A 1 D 1 BC \parallel A_1D_1 BC ∥ A 1 ​ D 1 ​ . In fact, A 1 D ∥ B 1 C A_1D \parallel B_1C A 1 ​ D ∥ B 1 ​ C .

Translate line B 1 C B_1C B 1 ​ C to line A 1 D A_1D A 1 ​ D (since B 1 C ∥ A 1 D B_1C \parallel A_1D B 1 ​ C ∥ A 1 ​ D ). Both A 1 B A_1B A 1 ​ B and A 1 D A_1D A 1 ​ D intersect at vertex A 1 A_1 A 1 ​ .

The angle between skew lines A 1 B A_1B A 1 ​ B and B 1 C B_1C B 1 ​ C is equal to ∠ B A 1 D \angle BA_1D ∠ B A 1 ​ D in △ A 1 B D \triangle A_1BD △ A 1 ​ B D .

Connect B D BD B D . The line segments A 1 B A_1B A 1 ​ B , A 1 D A_1D A 1 ​ D , and B D BD B D are face diagonals of the cube faces A B B 1 A 1 ABB_1A_1 A B B 1 ​ A 1 ​ , A D D 1 A 1 ADD_1A_1 A D D 1 ​ A 1 ​ , and A B C D ABCD A BC D , respectively.

Each face diagonal of a unit cube has length 1 2 + 1 2 = 2 \sqrt{1^2 + 1^2} = \sqrt{2} 1 2 + 1 2 ​ = 2 ​ .

Therefore, △ A 1 B D \triangle A_1BD △ A 1 ​ B D is an equilateral triangle with side length 2 \sqrt{2} 2 ​ .

Hence, ∠ B A 1 D = 60 ∘ = π 3 \angle BA_1D = 60^\circ = \frac{\pi}{3} ∠ B A 1 ​ D = 6 0 ∘ = 3 π ​ .

Conclusion: The angle between the skew lines A 1 B A_1B A 1 ​ B and B 1 C B_1C B 1 ​ C is 60 ∘ 60^\circ 6 0 ∘ (or π 3 \frac{\pi}{3} 3 π ​ radians).

Loading diagram... Classification of Spatial Lines and Planes