Study guide
16.3 Optimization Problems and Curve Sketching with Derivatives
Gaokao Mathematics Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Sets, Logic, and Algebraic Foundations
1.1 Sets and Set Operations 1.2 Propositional Logic and Quantifiers 1.3 Inequalities and Absolute Value Equations
2 Chapter 2: Functions and Fundamental Properties
2.1 Concept, Domain, Range, and Mapping of Functions 2.2 Monotonicity, Parity, and Periodicity of Functions 2.3 Function Graphs, Transformations, and Zeros
3 Chapter 3: Exponential, Logarithmic, and Power Functions
3.1 Exponents and Exponential Functions 3.2 Logarithms and Logarithmic Functions 3.3 Power Functions and Comparative Growth Rates
4 Chapter 4: Complex Numbers and Quadratic Function Views
4.1 Algebraic and Geometric Representations of Complex Numbers 4.2 Complex Number Operations and Equations 4.3 Quadratic Equations and Inequalities from a Function Viewpoint
5 Chapter 5: Trigonometric Functions and Identities
5.1 Angles, Radians, and Unit Circle Definitions 5.2 Trigonometric Identities and Reduction Formulas 5.3 Addition, Subtraction, and Double-Angle Formulas 5.4 Graphs and Properties of Sine, Cosine, and Tangent Functions
6 Chapter 6: Triangles and Trigonometric Applications
6.1 Sine Theorem, Cosine Theorem, and Triangle Area Formulas 6.2 Solving Triangles and Comprehensive Geometric Applications 6.3 Practical Measurement, Optimization, and Trigonometric Modeling
7 Chapter 7: Sequences and Series
7.1 Arithmetic Sequences and Sums 7.2 Geometric Sequences and Sums 7.3 Recurrence Relations and General Term Determination 7.4 Advanced Summation Techniques and Sequence Applications
8 Chapter 8: Plane Vectors
8.1 Vector Concepts, Addition, Subtraction, and Scalar Multiplication 8.2 Coordinate Operations of Vectors 8.3 Dot Products, Angles, Vector Projections, and Geometric Applications
9 Chapter 9: Lines and Circles in Cartesian Coordinates
9.1 Equations of Straight Lines and Positional Relationships 9.2 Standard and General Equations of Circles 9.3 Positional Relationships Between Lines and Circles
10 Chapter 10: Conic Sections: Ellipses
10.1 Standard Equations and Definitions of Ellipses 10.2 Geometric Properties of Ellipses (Vertices, Foci, Eccentricity) 10.3 Intersection of Lines and Ellipses and Chord Problems
11 Chapter 11: Conic Sections: Hyperbolas and Parabolas
11.1 Hyperbola Definitions, Standard Equations, and Asymptotes 11.2 Parabola Definitions, Standard Equations, and Focal Properties 11.3 Unified Properties of Conic Sections and Trajectory Problems
12 Chapter 12: Solid Geometry: Three-Dimensional Figures
12.1 Prisms, Pyramids, Cylinders, Cones, and Spheres 12.2 Three-Dimensional Views and Cross-Sections 12.3 Surface Area and Volume Calculations
13 Chapter 13: Spatial Lines, Planes, and Spatial Vectors
13.1 Positional Relationships of Lines and Planes in Space 13.2 Parallelism and Perpendicularity Proofs in Solid Geometry 13.3 Spatial Coordinates and Spatial Vector Operations 13.4 Using Spatial Vectors to Compute Angles and Distances
14 Chapter 14: Permutations, Combinations, and Binomial Theorem
14.1 Fundamental Counting Principles (Addition and Multiplication Rules) 14.2 Permutations and Combinations 14.3 Binomial Theorem, Expansion Terms, and Coefficients
15 Chapter 15: Probability and Statistics
15.1 Classical Probability and Conditional Probability 15.2 Independent Events and Repeated Bernoulli Trials 15.3 Discrete Random Variables, Probability Distributions, Expectation, and Variance 15.4 Normal Distribution, Statistical Sampling, Correlation, and Regression
16 Chapter 16: Derivatives and Mathematical Modeling
16.1 Limit Concepts and Derivatives of Elementary Functions 16.2 Tangent Lines, Derivatives, Monotonicity, and Extremum Analysis 16.3 Optimization Problems and Curve Sketching with Derivatives 16.4 Real-World Mathematical Modeling and Problem Solving
16.3 Optimization Problems and Curve Sketching with Derivatives
Key Takeaways Explain This Topic AI
On a closed interval, global extrema occur only at critical points where f ′ ( x ) = 0 f'(x)=0 f ′ ( x ) = 0 (or f ′ f' f ′ undefined) or at the endpoints — both must be checked before naming a maximum or minimum.
Applied optimization problems reduce a real scenario to a single-variable objective function using a given constraint, then apply the derivative test to that function.
A systematic curve-sketching checklist — domain, intercepts, symmetry, asymptotes, monotonicity, extrema, and light use of concavity — produces an accurate graph without plotting many points.
The sign of f ′ f' f ′ determines intervals of increase and decrease; a sign change at a critical point identifies a local maximum or minimum.
Definite integrals fall outside current national Gaokao selective-compulsory scope, so exam preparation should focus on derivative-based optimization and sketching, not integral techniques.
Last updated: July 2026
From Local Extrema to Global Answers
By this point you can already find where f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 and classify local maxima and minima using the first-derivative sign test. Selective-compulsory optimization work asks a sharper question: on a closed interval [ a , b ] [a, b] [ a , b ] , or in a real-world constrained scenario, what is the actual largest or smallest value f f f can take? Local extrema are candidates for that answer, but they are not the whole story — the interval's endpoints matter too.
The Closed-Interval Extreme Value Procedure
For f f f continuous on [ a , b ] [a, b] [ a , b ] and differentiable on ( a , b ) (a, b) ( a , b ) , the global maximum and minimum are guaranteed to exist and must occur either at a critical point (where f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 or f ′ f' f ′ is undefined) or at an endpoint. The procedure is mechanical:
Find f ′ ( x ) f'(x) f ′ ( x ) and solve f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 to get all critical points inside ( a , b ) (a, b) ( a , b ) .
Evaluate f f f at every critical point found in step 1.
Evaluate f f f at the two endpoints, f ( a ) f(a) f ( a ) and f ( b ) f(b) f ( b ) .
Compare all the values from steps 2–3: the largest is the global maximum, the smallest is the global minimum.
Worked Example 1. Find the global maximum and minimum of f ( x ) = x 3 − 3 x 2 + 1 f(x) = x^3 - 3x^2 + 1 f ( x ) = x 3 − 3 x 2 + 1 on [ − 1 , 3 ] [-1, 3] [ − 1 , 3 ] .
f ′ ( x ) = 3 x 2 − 6 x = 3 x ( x − 2 ) f'(x) = 3x^2 - 6x = 3x(x - 2) f ′ ( x ) = 3 x 2 − 6 x = 3 x ( x − 2 ) . Critical points: x = 0 x = 0 x = 0 and x = 2 x = 2 x = 2 , both inside ( − 1 , 3 ) (-1, 3) ( − 1 , 3 ) .
- f ( − 1 ) = − 1 − 3 + 1 = − 3 f(-1) = -1 - 3 + 1 = -3 f ( − 1 ) = − 1 − 3 + 1 = − 3
- f ( 0 ) = 1 f(0) = 1 f ( 0 ) = 1
- f ( 2 ) = 8 − 12 + 1 = − 3 f(2) = 8 - 12 + 1 = -3 f ( 2 ) = 8 − 12 + 1 = − 3
- f ( 3 ) = 27 − 27 + 1 = 1 f(3) = 27 - 27 + 1 = 1 f ( 3 ) = 27 − 27 + 1 = 1
Comparing { − 3 , 1 , − 3 , 1 } \{-3, 1, -3, 1\} { − 3 , 1 , − 3 , 1 } : the global maximum is 1 1 1 (attained at both x = 0 x = 0 x = 0 and x = 3 x = 3 x = 3 ), and the global minimum is − 3 -3 − 3 (attained at both x = − 1 x = -1 x = − 1 and x = 2 x = 2 x = 2 ). The two local extrema are not automatically the global extrema — you must check the endpoints to be sure.
Applied Optimization Word Problems
Most Gaokao optimization problems hide the interval procedure inside a physical setup: maximize area, volume, revenue, or minimize cost, material, or distance, subject to a fixed constraint. A reliable workflow:
Name the variable. Choose the single free variable (often a length x x x ) and write its natural domain (e.g., 0 < x < 10 0 < x < 10 0 < x < 10 ) from the physical constraint.
Build the objective function. Use the constraint to eliminate all other variables so you have one function of that one variable, e.g. Volume V ( x ) V(x) V ( x ) or Cost C ( x ) C(x) C ( x ) .
Differentiate and solve V ′ ( x ) = 0 V'(x) = 0 V ′ ( x ) = 0 for critical points inside the domain.
Classify with the interval procedure (or a first-derivative sign change if the domain is open) to confirm the critical point is a genuine maximum or minimum, not just a stationary point.
Answer the original question , translating back from x x x into the requested quantity and stating units.
Worked Example 2. A rectangular box with a square base and open top is to be built from 108 m 2 108\ \mathrm{m}^2 108 m 2 of material. Find the dimensions that maximize its volume.
Let the base side be x x x and the height be h h h . Surface area constraint: x 2 + 4 x h = 108 x^2 + 4xh = 108 x 2 + 4 x h = 108 , so h = 108 − x 2 4 x h = \frac{108 - x^2}{4x} h = 4 x 108 − x 2 , valid for 0 < x < 108 0 < x < \sqrt{108} 0 < x < 108 .
Volume: V ( x ) = x 2 h = x 2 ⋅ 108 − x 2 4 x = 108 x − x 3 4 = 27 x − x 3 4 V(x) = x^2 h = x^2 \cdot \frac{108 - x^2}{4x} = \frac{108x - x^3}{4} = 27x - \frac{x^3}{4} V ( x ) = x 2 h = x 2 ⋅ 4 x 108 − x 2 = 4 108 x − x 3 = 27 x − 4 x 3 .
V ′ ( x ) = 27 − 3 4 x 2 V'(x) = 27 - \frac{3}{4}x^2 V ′ ( x ) = 27 − 4 3 x 2 . Setting V ′ ( x ) = 0 V'(x) = 0 V ′ ( x ) = 0 : x 2 = 36 x^2 = 36 x 2 = 36 , so x = 6 x = 6 x = 6 (rejecting the negative root since x > 0 x > 0 x > 0 ).
Since V ′ ( x ) > 0 V'(x) > 0 V ′ ( x ) > 0 for x < 6 x < 6 x < 6 and V ′ ( x ) < 0 V'(x) < 0 V ′ ( x ) < 0 for x > 6 x > 6 x > 6 , V V V has a maximum at x = 6 x = 6 x = 6 .
Then h = 108 − 36 24 = 3 h = \frac{108 - 36}{24} = 3 h = 24 108 − 36 = 3 . Maximum volume: V ( 6 ) = 27 ( 6 ) − 216 4 = 162 − 54 = 108 m 3 V(6) = 27(6) - \frac{216}{4} = 162 - 54 = 108\ \mathrm{m}^3 V ( 6 ) = 27 ( 6 ) − 4 216 = 162 − 54 = 108 m 3 , at base side 6 m 6\ \mathrm{m} 6 m and height 3 m 3\ \mathrm{m} 3 m .
A Systematic Curve-Sketching Checklist
Curve sketching packages everything you know about a function's derivative into a single accurate picture. Work through these checks in order:
- Step What to check What it tells you
- 1. Domain Values excluded (denominators, even roots, logs) Where the graph can even exist
- 2. Intercepts f ( 0 ) f(0) f ( 0 ) and solve f ( x ) = 0 f(x) = 0 f ( x ) = 0 Where the graph crosses the axes
3. Symmetry f ( − x ) = f ( x ) f(-x) = f(x) f ( − x ) = f ( x ) (even) or f ( − x ) = − f ( x ) f(-x) = -f(x) f ( − x ) = − f ( x ) (odd) Whether to sketch only half and reflect
4. Monotonicity Sign of f ′ ( x ) f'(x) f ′ ( x ) on each interval Where f f f is increasing or decreasing
5. Local extrema Where f ′ ( x ) = 0 f'(x) = 0 f ′ ( x ) = 0 and sign of f ′ f' f ′ changes Local maxima and minima (turning points)
6. Concavity (light use) Sign of f ′ ′ ( x ) f''(x) f ′′ ( x ) Whether the curve bends upward or downward, and any inflection points
7. Asymptotes Behavior as x → ± ∞ x \to \pm\infty x → ± ∞ or near excluded domain values Long-run and boundary behavior
Worked Example 3. Sketch the key features of f ( x ) = x 3 − 3 x f(x) = x^3 - 3x f ( x ) = x 3 − 3 x .
Domain: all real x x x .
Intercepts: f ( 0 ) = 0 f(0) = 0 f ( 0 ) = 0 ; solving x 3 − 3 x = 0 x^3 - 3x = 0 x 3 − 3 x = 0 gives x ( x 2 − 3 ) = 0 x(x^2 - 3) = 0 x ( x 2 − 3 ) = 0 , so x = 0 , ± 3 x = 0, \pm\sqrt{3} x = 0 , ± 3 .
Symmetry: f ( − x ) = − x 3 + 3 x = − f ( x ) f(-x) = -x^3 + 3x = -f(x) f ( − x ) = − x 3 + 3 x = − f ( x ) , so f f f is odd.
Monotonicity: f ′ ( x ) = 3 x 2 − 3 = 3 ( x − 1 ) ( x + 1 ) f'(x) = 3x^2 - 3 = 3(x-1)(x+1) f ′ ( x ) = 3 x 2 − 3 = 3 ( x − 1 ) ( x + 1 ) , positive outside [ − 1 , 1 ] [-1, 1] [ − 1 , 1 ] and negative inside it, so f f f increases on ( − ∞ , − 1 ) (-\infty, -1) ( − ∞ , − 1 ) , decreases on ( − 1 , 1 ) (-1, 1) ( − 1 , 1 ) , and increases again on ( 1 , ∞ ) (1, \infty) ( 1 , ∞ ) .
Local extrema: local maximum at x = − 1 x = -1 x = − 1 ( f ( − 1 ) = 2 f(-1) = 2 f ( − 1 ) = 2 ), local minimum at x = 1 x = 1 x = 1 ( f ( 1 ) = − 2 f(1) = -2 f ( 1 ) = − 2 ).
No asymptotes, since f f f is a polynomial.
This checklist output is enough to draw an accurate rise–fall–rise cubic without plotting dozens of points.
A Note on Scope: Integrals Are Not Required
It is tempting, once you can sketch a curve, to ask "what is the area under it?" and reach for integration. Under the current national Gaokao selective-compulsory curriculum, the required content is 一元函数导数及其应用 (derivatives of functions of one variable and their applications) — definite integrals and the Fundamental Theorem of Calculus are not part of the nationally examined syllabus. Spend preparation time mastering the derivative-based procedures above (interval extrema, applied optimization, and the sketching checklist), since these are what the exam actually tests; do not budget review time for computing definite integrals as an exam technique.