Study guide

5.1 Angles, Radians, and Unit Circle Definitions

Gaokao Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Sets, Logic, and Algebraic Foundations

1.1 Sets and Set Operations 1.2 Propositional Logic and Quantifiers 1.3 Inequalities and Absolute Value Equations

2 Chapter 2: Functions and Fundamental Properties

2.1 Concept, Domain, Range, and Mapping of Functions 2.2 Monotonicity, Parity, and Periodicity of Functions 2.3 Function Graphs, Transformations, and Zeros

3 Chapter 3: Exponential, Logarithmic, and Power Functions

3.1 Exponents and Exponential Functions 3.2 Logarithms and Logarithmic Functions 3.3 Power Functions and Comparative Growth Rates

4 Chapter 4: Complex Numbers and Quadratic Function Views

4.1 Algebraic and Geometric Representations of Complex Numbers 4.2 Complex Number Operations and Equations 4.3 Quadratic Equations and Inequalities from a Function Viewpoint

5 Chapter 5: Trigonometric Functions and Identities

5.1 Angles, Radians, and Unit Circle Definitions 5.2 Trigonometric Identities and Reduction Formulas 5.3 Addition, Subtraction, and Double-Angle Formulas 5.4 Graphs and Properties of Sine, Cosine, and Tangent Functions

6 Chapter 6: Triangles and Trigonometric Applications

6.1 Sine Theorem, Cosine Theorem, and Triangle Area Formulas 6.2 Solving Triangles and Comprehensive Geometric Applications 6.3 Practical Measurement, Optimization, and Trigonometric Modeling

7 Chapter 7: Sequences and Series

7.1 Arithmetic Sequences and Sums 7.2 Geometric Sequences and Sums 7.3 Recurrence Relations and General Term Determination 7.4 Advanced Summation Techniques and Sequence Applications

8 Chapter 8: Plane Vectors

8.1 Vector Concepts, Addition, Subtraction, and Scalar Multiplication 8.2 Coordinate Operations of Vectors 8.3 Dot Products, Angles, Vector Projections, and Geometric Applications

9 Chapter 9: Lines and Circles in Cartesian Coordinates

9.1 Equations of Straight Lines and Positional Relationships 9.2 Standard and General Equations of Circles 9.3 Positional Relationships Between Lines and Circles

10 Chapter 10: Conic Sections: Ellipses

10.1 Standard Equations and Definitions of Ellipses 10.2 Geometric Properties of Ellipses (Vertices, Foci, Eccentricity) 10.3 Intersection of Lines and Ellipses and Chord Problems

11 Chapter 11: Conic Sections: Hyperbolas and Parabolas

11.1 Hyperbola Definitions, Standard Equations, and Asymptotes 11.2 Parabola Definitions, Standard Equations, and Focal Properties 11.3 Unified Properties of Conic Sections and Trajectory Problems

12 Chapter 12: Solid Geometry: Three-Dimensional Figures

12.1 Prisms, Pyramids, Cylinders, Cones, and Spheres 12.2 Three-Dimensional Views and Cross-Sections 12.3 Surface Area and Volume Calculations

13 Chapter 13: Spatial Lines, Planes, and Spatial Vectors

13.1 Positional Relationships of Lines and Planes in Space 13.2 Parallelism and Perpendicularity Proofs in Solid Geometry 13.3 Spatial Coordinates and Spatial Vector Operations 13.4 Using Spatial Vectors to Compute Angles and Distances

14 Chapter 14: Permutations, Combinations, and Binomial Theorem

14.1 Fundamental Counting Principles (Addition and Multiplication Rules) 14.2 Permutations and Combinations 14.3 Binomial Theorem, Expansion Terms, and Coefficients

15 Chapter 15: Probability and Statistics

15.1 Classical Probability and Conditional Probability 15.2 Independent Events and Repeated Bernoulli Trials 15.3 Discrete Random Variables, Probability Distributions, Expectation, and Variance 15.4 Normal Distribution, Statistical Sampling, Correlation, and Regression

16 Chapter 16: Derivatives and Mathematical Modeling

16.1 Limit Concepts and Derivatives of Elementary Functions 16.2 Tangent Lines, Derivatives, Monotonicity, and Extremum Analysis 16.3 Optimization Problems and Curve Sketching with Derivatives 16.4 Real-World Mathematical Modeling and Problem Solving

5.1 Angles, Radians, and Unit Circle Definitions

Key Takeaways Explain This Topic AI

A general angle extends classical geometry by accounting for arbitrary directions of rotation, where counterclockwise rotation corresponds to positive angles, clockwise to negative angles, and co-terminal angles differ by integer multiples of 2 π 2\pi 2 π radians ( 360 ∘ 360^\circ 36 0 ∘ ).

One radian is the central angle subtending an arc length equal to the circle's radius; arc length is given by l = ∣ α ∣ r l = |\alpha| r l = ∣ α ∣ r and sector area is S = 1 2 l r = 1 2 ∣ α ∣ r 2 S = \frac{1}{2} l r = \frac{1}{2} |\alpha| r^2 S = 2 1 ​ l r = 2 1 ​ ∣ α ∣ r 2 .

For an angle α \alpha α with terminal side intersecting the unit circle x 2 + y 2 = 1 x^2 + y^2 = 1 x 2 + y 2 = 1 at point P ( x , y ) P(x, y) P ( x , y ) , the trigonometric functions are defined as sin ⁡ α = y \sin\alpha = y sin α = y , cos ⁡ α = x \cos\alpha = x cos α = x , and tan ⁡ α = y x \tan\alpha = \frac{y}{x} tan α = x y ​ ( x ≠ 0 x \neq 0 x  = 0 ).

The signs of trigonometric functions in the four quadrants follow the rule: Quadrant I (all positive), Quadrant II (sine positive), Quadrant III (tangent positive), Quadrant IV (cosine positive).

Last updated: July 2026

5.1 Angles, Radians, and Unit Circle Definitions

Trigonometry in upper secondary mathematics extends far beyond the right-triangle ratios ( opposite / hypotenuse \text{opposite}/\text{hypotenuse} opposite / hypotenuse , etc.) encountered in middle school geometry. In the Gaokao examination framework, trigonometric functions are formulated as real-valued functions of real variables defined on the Cartesian coordinate plane via the unit circle. This section establishes the fundamental concepts of general angles, radian measure, sector optimization, and unit circle definitions.

1. Extension of the Angle Concept (任意角的概念)

In elementary geometry, an angle is restricted to the interval [ 0 ∘ , 360 ∘ ] [0^\circ, 360^\circ] [ 0 ∘ , 36 0 ∘ ] . However, describing continuous phenomena such as rotation, harmonic oscillation, and wave motion requires angles to encompass arbitrary real numbers α ∈ R \alpha \in \mathbb{R} α ∈ R .

Definition of General Angles

An angle is generated by rotating a ray about its endpoint (the vertex) from an initial side (始边) to a terminal side (终边):

Positive Angles (正角) : Generated by counterclockwise rotation.

Negative Angles (负角) : Generated by clockwise rotation.

Zero Angle (零角) : Generated when the ray undergoes no rotation at all.

Standard Position and Co-Terminal Angles

When an angle α \alpha α is placed in standard position on a Cartesian coordinate system, its vertex is at the origin O ( 0 , 0 ) O(0,0) O ( 0 , 0 ) and its initial side coincides with the positive x x x -axis.

Co-Terminal Angles (终边相同的角) : Two angles α \alpha α and β \beta β share the exact same terminal side if and only if their difference is an integer multiple of 360 ∘ 360^\circ 36 0 ∘ (or 2 π 2\pi 2 π radians). The set of all angles co-terminal with α \alpha α is expressed as: S = { β ∣ β = α + k ⋅ 360 ∘ , k ∈ Z } = { β ∣ β = α + 2 k π , k ∈ Z } S = \{\beta \mid \beta = \alpha + k \cdot 360^\circ, k \in \mathbb{Z}\} = \{\beta \mid \beta = \alpha + 2k\pi, k \in \mathbb{Z}\} S = { β ∣ β = α + k ⋅ 36 0 ∘ , k ∈ Z } = { β ∣ β = α + 2 kπ , k ∈ Z }

Quadrant Angles and Axis-Bound Angles

Depending on where its terminal side lies, an angle in standard position is classified as:

Quadrant Angle (象限角) : The terminal side lies strictly inside one of the four quadrants.

Quadrant I : { α ∣ 2 k π < α < 2 k π + π 2 , k ∈ Z } \{\alpha \mid 2k\pi < \alpha < 2k\pi + \frac{\pi}{2}, k \in \mathbb{Z}\} { α ∣ 2 kπ < α < 2 kπ + 2 π ​ , k ∈ Z }

Quadrant II : { α ∣ 2 k π + π 2 < α < 2 k π + π , k ∈ Z } \{\alpha \mid 2k\pi + \frac{\pi}{2} < \alpha < 2k\pi + \pi, k \in \mathbb{Z}\} { α ∣ 2 kπ + 2 π ​ < α < 2 kπ + π , k ∈ Z }

Quadrant III : { α ∣ 2 k π + π < α < 2 k π + 3 π 2 , k ∈ Z } \{\alpha \mid 2k\pi + \pi < \alpha < 2k\pi + \frac{3\pi}{2}, k \in \mathbb{Z}\} { α ∣ 2 kπ + π < α < 2 kπ + 2 3 π ​ , k ∈ Z }

Quadrant IV : { α ∣ 2 k π + 3 π 2 < α < 2 k π + 2 π , k ∈ Z } \{\alpha \mid 2k\pi + \frac{3\pi}{2} < \alpha < 2k\pi + 2\pi, k \in \mathbb{Z}\} { α ∣ 2 kπ + 2 3 π ​ < α < 2 kπ + 2 π , k ∈ Z }

Axis-Bound Angle (轴线角 / 象限界角) : The terminal side coincides with one of the coordinate axes (e.g., 0 , ± π 2 , ± π , ± 3 π 2 , … 0, \pm\frac{\pi}{2}, \pm\pi, \pm\frac{3\pi}{2}, \dots 0 , ± 2 π ​ , ± π , ± 2 3 π ​ , … ).

  • 2. Radian Measure and Sector Formulas (弧度制与扇形公式)
  • Definition of Radian

One radian ( 1 rad 1\text{ rad} 1 rad ) is defined as the measure of a central angle that subtends an arc whose length is equal to the radius of the circle. Because radian measure represents a ratio of two lengths (arc length divided by radius), radians are dimensionless real numbers.

Conversion Between Degrees and Radians

Since a full circle of radius r r r has circumference 2 π r 2\pi r 2 π r and corresponds to 360 ∘ 360^\circ 36 0 ∘ , we have: 360 ∘ = 2 π rad ⟹ 180 ∘ = π rad 360^\circ = 2\pi \text{ rad} \implies 180^\circ = \pi \text{ rad} 36 0 ∘ = 2 π rad ⟹ 18 0 ∘ = π rad

Degree to Radian : α rad = α ∘ × π 180 ∘ \alpha_{\text{rad}} = \alpha^\circ \times \frac{\pi}{180^\circ} α rad ​ = α ∘ × 18 0 ∘ π ​

Radian to Degree : α ∘ = α rad × 180 ∘ π \alpha^\circ = \alpha_{\text{rad}} \times \frac{180^\circ}{\pi} α ∘ = α rad ​ × π 18 0 ∘ ​

Common special values: 30 ∘ = π 6 30^\circ = \frac{\pi}{6} 3 0 ∘ = 6 π ​ , 45 ∘ = π 4 45^\circ = \frac{\pi}{4} 4 5 ∘ = 4 π ​ , 60 ∘ = π 3 60^\circ = \frac{\pi}{3} 6 0 ∘ = 3 π ​ , 90 ∘ = π 2 90^\circ = \frac{\pi}{2} 9 0 ∘ = 2 π ​ , 120 ∘ = 2 π 3 120^\circ = \frac{2\pi}{3} 12 0 ∘ = 3 2 π ​ , 135 ∘ = 3 π 4 135^\circ = \frac{3\pi}{4} 13 5 ∘ = 4 3 π ​ , 150 ∘ = 5 π 6 150^\circ = \frac{5\pi}{6} 15 0 ∘ = 6 5 π ​ , 180 ∘ = π 180^\circ = \pi 18 0 ∘ = π .

Arc Length and Sector Area Formulas

For a circle of radius r r r and a central angle α \alpha α measured in radians ( ∣ α ∣ |\alpha| ∣ α ∣ being its absolute magnitude):

Arc Length ( l l l ) : l = ∣ α ∣ r l = |\alpha| r l = ∣ α ∣ r

Sector Area ( S S S ) : S = 1 2 l r = 1 2 ∣ α ∣ r 2 S = \frac{1}{2} l r = \frac{1}{2} |\alpha| r^2 S = 2 1 ​ l r = 2 1 ​ ∣ α ∣ r 2

Sector Area Optimization (Gaokao High-Frequency Problem Type)

A recurring problem on the Gaokao involves finding the maximum area of a sector given a fixed perimeter C C C .

Let C = 2 r + l C = 2r + l C = 2 r + l be the fixed perimeter. Substituting l = C − 2 r l = C - 2r l = C − 2 r into the sector area formula yields: S ( r ) = 1 2 ( C − 2 r ) r = C 2 r − r 2 = − ( r − C 4 ) 2 + C 2 16 S(r) = \frac{1}{2} (C - 2r) r = \frac{C}{2}r - r^2 = -\left(r - \frac{C}{4}\right)^2 + \frac{C^2}{16} S ( r ) = 2 1 ​ ( C − 2 r ) r = 2 C ​ r − r 2 = − ( r − 4 C ​ ) 2 + 16 C 2 ​

Thus, the sector achieves its maximum area S max ⁡ = C 2 16 S_{\max} = \frac{C^2}{16} S m a x ​ = 16 C 2 ​ when r = C 4 r = \frac{C}{4} r = 4 C ​ and arc length l = C 2 l = \frac{C}{2} l = 2 C ​ . The corresponding central angle is: α = l r = C / 2 C / 4 = 2 rad \alpha = \frac{l}{r} = \frac{C/2}{C/4} = 2 \text{ rad} α = r l ​ = C /4 C /2 ​ = 2 rad

3. Unit Circle Definition of Trigonometric Functions (三角函数的单位圆定义)

To define trigonometric functions for any angle α ∈ R \alpha \in \mathbb{R} α ∈ R , we construct a unit circle centered at the origin with radius r = 1 r = 1 r = 1 , given by the equation x 2 + y 2 = 1 x^2 + y^2 = 1 x 2 + y 2 = 1 .

Definition via Unit Circle Coordinates

Let α \alpha α be an angle in standard position. Its terminal side intersects the unit circle at a unique point P ( x , y ) P(x, y) P ( x , y ) . The three basic trigonometric functions are defined as: sin ⁡ α = y , cos ⁡ α = x , tan ⁡ α = y x ( x ≠ 0 ) \sin\alpha = y, \quad \cos\alpha = x, \quad \tan\alpha = \frac{y}{x} \quad (x \neq 0) sin α = y , cos α = x , tan α = x y ​ ( x  = 0 )

General Point Definition

If P ( x , y ) P(x, y) P ( x , y ) is any arbitrary point (other than the origin) on the terminal side of angle α \alpha α , and its distance to the origin is r = x 2 + y 2 > 0 r = \sqrt{x^2 + y^2} > 0 r = x 2 + y 2 ​ > 0 , then: sin ⁡ α = y r , cos ⁡ α = x r , tan ⁡ α = y x ( x ≠ 0 ) \sin\alpha = \frac{y}{r}, \quad \cos\alpha = \frac{x}{r}, \quad \tan\alpha = \frac{y}{x} \quad (x \neq 0) sin α = r y ​ , cos α = r x ​ , tan α = x y ​ ( x  = 0 )

  • 4. Quadrant Signs and Trigonometric Line Representations (象限符号与三角函数线)
  • Quadrant Signs of Trigonometric Functions

Because r > 0 r > 0 r > 0 , the algebraic sign of sin ⁡ α \sin\alpha sin α , cos ⁡ α \cos\alpha cos α , and tan ⁡ α \tan\alpha tan α depends strictly on the coordinates ( x , y ) (x, y) ( x , y ) of point P P P :

  • Function Quadrant I Quadrant II Quadrant III Quadrant IV
  • sin ⁡ α \sin\alpha sin α ( y y y ) + + + + + + − - − − - −
  • cos ⁡ α \cos\alpha cos α ( x x x ) + + + − - − − - − + + +
  • tan ⁡ α \tan\alpha tan α ( y / x y/x y / x ) + + + − - − + + + − - −

Mnemonic Rule : "一全正,二正弦,三正切,四余弦" (Quadrant I: all positive; II: sine positive; III: tangent positive; IV: cosine positive).

Trigonometric Lines (三角函数线)

In the unit circle, directed line segments represent the numeric values and signs of trigonometric functions for an angle α \alpha α :

Sine Line ( M P MP MP ) : The directed segment from the projection M ( x , 0 ) M(x, 0) M ( x , 0 ) on the x x x -axis to point P ( x , y ) P(x, y) P ( x , y ) . Its directed magnitude equals sin ⁡ α \sin\alpha sin α .

Cosine Line ( O M OM OM ) : The directed segment from the origin O ( 0 , 0 ) O(0, 0) O ( 0 , 0 ) to projection M ( x , 0 ) M(x, 0) M ( x , 0 ) . Its directed magnitude equals cos ⁡ α \cos\alpha cos α .

Tangent Line ( A T AT A T ) : The directed segment along the line x = 1 x = 1 x = 1 from A ( 1 , 0 ) A(1, 0) A ( 1 , 0 ) to the intersection T ( 1 , tan ⁡ α ) T(1, \tan\alpha) T ( 1 , tan α ) of the terminal side (or its backward extension) with x = 1 x = 1 x = 1 . Its directed magnitude equals tan ⁡ α \tan\alpha tan α .

  • 5. Worked Gaokao Exam Examples (高考典型例题精讲)
  • Worked Example 1: Sector Optimization Problem

Problem : A sector has a fixed perimeter of 16 cm 16\text{ cm} 16 cm . Find the radius r r r , arc length l l l , and central angle α \alpha α that maximize the area of the sector. Calculate the maximum area S max ⁡ S_{\max} S m a x ​ .

Solution :

Formulate the perimeter relation : 2 r + l = 16 ⟹ l = 16 − 2 r 2r + l = 16 \implies l = 16 - 2r 2 r + l = 16 ⟹ l = 16 − 2 r

Express sector area S S S in terms of r r r : S = 1 2 l r = 1 2 ( 16 − 2 r ) r = 8 r − r 2 S = \frac{1}{2} l r = \frac{1}{2} (16 - 2r) r = 8r - r^2 S = 2 1 ​ l r = 2 1 ​ ( 16 − 2 r ) r = 8 r − r 2

Complete the square : S ( r ) = − ( r 2 − 8 r + 16 ) + 16 = − ( r − 4 ) 2 + 16 S(r) = -(r^2 - 8r + 16) + 16 = -(r - 4)^2 + 16 S ( r ) = − ( r 2 − 8 r + 16 ) + 16 = − ( r − 4 ) 2 + 16

Determine optimal values :

Since r > 0 r > 0 r > 0 and l = 16 − 2 r > 0 l = 16 - 2r > 0 l = 16 − 2 r > 0 , we have 0 < r < 8 0 < r < 8 0 < r < 8 . The parabola opens downward, achieving its maximum at r = 4 cm r = 4\text{ cm} r = 4 cm .

Arc length: l = 16 − 2 ( 4 ) = 8 cm l = 16 - 2(4) = 8\text{ cm} l = 16 − 2 ( 4 ) = 8 cm .

Central angle: α = l r = 8 4 = 2 rad \alpha = \frac{l}{r} = \frac{8}{4} = 2\text{ rad} α = r l ​ = 4 8 ​ = 2 rad .

Maximum area: S max ⁡ = 16 cm 2 S_{\max} = 16\text{ cm}^2 S m a x ​ = 16 cm 2 .

Worked Example 2: Point on Terminal Side

Problem : Suppose the terminal side of an angle α \alpha α in standard position passes through the point P ( − 3 , y ) P(-3, y) P ( − 3 , y ) where y ≠ 0 y \neq 0 y  = 0 . If sin ⁡ α = − 4 5 \sin\alpha = -\frac{4}{5} sin α = − 5 4 ​ , determine the value of y y y and evaluate cos ⁡ α \cos\alpha cos α and tan ⁡ α \tan\alpha tan α .

Solution :

Express distance r r r from origin : r = ( − 3 ) 2 + y 2 = 9 + y 2 r = \sqrt{(-3)^2 + y^2} = \sqrt{9 + y^2} r = ( − 3 ) 2 + y 2 ​ = 9 + y 2 ​

Apply unit/general circle definition of sine : sin ⁡ α = y r = y 9 + y 2 = − 4 5 \sin\alpha = \frac{y}{r} = \frac{y}{\sqrt{9 + y^2}} = -\frac{4}{5} sin α = r y ​ = 9 + y 2 ​ y ​ = − 5 4 ​

Solve for y y y :

Since sin ⁡ α < 0 \sin\alpha < 0 sin α < 0 , y y y must be negative ( y < 0 y < 0 y < 0 ). Squaring both sides yields: y 2 9 + y 2 = 16 25 ⟹ 25 y 2 = 16 ( 9 + y 2 ) = 144 + 16 y 2 \frac{y^2}{9 + y^2} = \frac{16}{25} \implies 25y^2 = 16(9 + y^2) = 144 + 16y^2 9 + y 2 y 2 ​ = 25 16 ​ ⟹ 25 y 2 = 16 ( 9 + y 2 ) = 144 + 16 y 2 9 y 2 = 144 ⟹ y 2 = 16 ⟹ y = − 4 ( since y < 0 ) 9y^2 = 144 \implies y^2 = 16 \implies y = -4 \quad (\text{since } y < 0) 9 y 2 = 144 ⟹ y 2 = 16 ⟹ y = − 4 ( since y < 0 )

Calculate r r r , cos ⁡ α \cos\alpha cos α , and tan ⁡ α \tan\alpha tan α :

Distance: r = 9 + ( − 4 ) 2 = 5 r = \sqrt{9 + (-4)^2} = 5 r = 9 + ( − 4 ) 2 ​ = 5 .

Cosine: cos ⁡ α = x r = − 3 5 = − 3 5 \cos\alpha = \frac{x}{r} = \frac{-3}{5} = -\frac{3}{5} cos α = r x ​ = 5 − 3 ​ = − 5 3 ​ .

Tangent: tan ⁡ α = y x = − 4 − 3 = 4 3 \tan\alpha = \frac{y}{x} = \frac{-4}{-3} = \frac{4}{3} tan α = x y ​ = − 3 − 4 ​ = 3 4 ​ .

Loading diagram... Unit Circle Definition of Trigonometric Functions