Study guide

3.3 Pesticide Formulations, Compatibility & Adjuvants

Colorado Pesticide Applicator Certification Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Federal Pesticide Law, Registration & Certification

1.1 Federal Pesticide Laws & FIFRA Framework 1.2 Federal Certification Standards and Supervision of Noncertified Applicators

2 Chapter 2: The Colorado Pesticide Applicators' Act — Licensing, Records & Compliance

2.1 Colorado Pesticide Applicators' Act & Licensing Categories 2.2 Colorado Pest-Management Licensure Categories 2.3 Examinations, Fees, Renewal, Reinstatement & Reciprocity 2.4 Continuing Education Credits and Recertification Subjects 2.5 Technician Training Mandates Under 8 CCR 1203-2 Part 5 2.6 Application Records Under 8 CCR 1203-2 Part 6 2.7 Business Practices: Equipment Identification, Invoices, Insurance & Label Possession 2.8 The Registry of Pesticide-Sensitive Persons and Advance Notification 2.9 Notice-of-Application Signs and Customer Notices 2.10 The Colorado Chemigation Act and Backflow Prevention 2.11 Unlawful Acts, Enforcement, Penalties & License Discipline 2.12 Pesticide Use in Colorado Cannabis Production

3 Chapter 3: Integrated Pest Management, Pest Biology, Pesticide Families & Formulations

3.1 IPM Principles, Scouting & Action Thresholds 3.2 Pest Biology, Morphology & Damage Identification 3.3 Pesticide Formulations, Compatibility & Adjuvants 3.4 Pesticide Types, Chemical Families & Modes of Action

4 Chapter 4: Pesticide Labels, Safety Data Sheets & Regulatory Compliance

4.1 Pesticide Label Interpretation & Legal Mandates 4.2 Signal Words, Precautionary Statements & Toxicity Categories 4.3 Directions for Use, Restrictions & Safety Data Sheets (SDS)

5 Chapter 5: Pesticide Toxicology, Human Health Hazards & First Aid

5.1 Principles of Toxicology, Dose-Response & Chronic Health Risks 5.2 Routes of Exposure, Absorption Rates & Chemical Poisoning Symptoms 5.3 Emergency First Aid, Antidote Protocols & Heat Stress Management

6 Chapter 6: Personal Protective Equipment, Respiratory Protection, WPS & Public Safety

6.1 PPE Selection, Chemical Resistance & Laundering Protocols 6.2 Respiratory Protection, Cartridge Selection & Fit Testing 6.3 EPA Worker Protection Standard (WPS) & Agricultural Employer Duties 6.4 Public Safety: Bystanders, Sensitive Sites, Communication & Chemical Security

7 Chapter 7: Environmental Protection, Water Quality & Drift Management

7.1 Pesticide Environmental Fate & Water Resource Protection 7.2 Spray Drift Mechanics, Droplet Dynamics & Weather Factors 7.3 Pollinator Stewardship & Non-Target Organism Protection 7.4 Endangered Species Act & Colorado Climate Adaptations

8 Chapter 8: Application Equipment, Methods, Calibration & Tank Mixing

8.1 Spray Equipment Systems, Pump Mechanics & Nozzle Technology 8.2 Agricultural Boom Sprayer Calibration & Operating Mathematics 8.3 Turf, Landscape & Granular Application Equipment Calibration 8.4 Tank Mixing Mathematics, Solution Blending & Loading Sequences 8.5 Application Methods, Techniques & Placement Decisions 8.6 Equipment Cleanout, Maintenance & Preventing Carryover Injury

9 Chapter 9: Safe Storage, Transport, Container Disposal & Spill Response

9.1 Pesticide Storage Facility Engineering, Security & Climate Control 9.2 Mixing/Loading Operations, Container Rinsing & Disposal Protocols 9.3 The Three C's of Spill Management & Emergency Reporting Protocols 9.4 Transporting Pesticides Safely and Legally

3.3 Pesticide Formulations, Compatibility & Adjuvants

Key Takeaways Explain This Topic AI

Pesticide formulations combine active ingredients (AI) with inert substances to optimize safety, handling, storage, and biological efficacy; sprays form true solutions, suspensions, or emulsions.

Emulsifiable Concentrates (EC) carry increased dermal absorption risks, solvent-induced equipment gasket degradation, and crop phytotoxicity under heat, while Wettable Powders (WP) present severe inhalation hazards, nozzle abrasion, and require constant tank agitation.

Microencapsulated (ME) formulations offer extended residual control but present an extreme hazard to honeybees because the capsule dimensions mimic pollen grains collected by foraging workers.

Tank mixing requires conducting a Jar Test for physical compatibility and adhering strictly to the WALES / DLABS addition sequence: Wettable powders/dry flowables -> Agitate liquids -> Liquid solubles -> Emulsifiable concentrates -> Surfactants/adjuvants.

Last updated: August 2026

Formulation Chemistry: Active vs. Inert Ingredients

A pesticide product in its pure commercial synthesis—the active ingredient (AI) —is rarely suitable for direct field application. Pure technical-grade chemicals are frequently insoluble in water, chemically unstable under sunlight, difficult to handle safely, or impossible to meter evenly across large acreages. Manufacturers blend technical active ingredients with inert ingredients (solvents, mineral carriers, emulsifiers, wetting agents, stabilizers, and dyes) to produce a formulation that can be safely measured, mixed with a carrier, and distributed uniformly.

How Formulations Behave in the Spray Tank

When added to water in a spray tank, all formulations behave as one of three physical mixtures:

True Solution: The active ingredient dissolves completely in water at a molecular level (like table salt in water). Solutions are transparent, never settle to the bottom, and require no agitation once thoroughly dissolved.

Suspension: Insoluble solid particles of active ingredient are suspended throughout the liquid carrier (like fine sand in water). Suspensions are cloudy or opaque, do not dissolve, settle rapidly to the bottom of the tank if agitation stops, and cause mechanical abrasion to pumps, regulators, and nozzle orifices.

Emulsion: One liquid is dispersed as microscopic droplets within another immiscible liquid (like oil in water), facilitated by an emulsifier . Emulsions are milky-white in appearance. If chemical destabilization occurs, the emulsion "breaks," causing an oily film or curds to separate on the liquid surface.

Survey of Liquid and Dry Formulations

Code Formulation Name Tank Mixture Type Major Advantages Major Disadvantages & Exam Alerts

EC Emulsifiable Concentrate Emulsion (milky) Easy to measure and pour; non-abrasive to nozzles; leaves little visible residue. Organic petroleum solvents increase dermal absorption through skin; causes phytotoxicity (plant burn) in high heat (>85°F); deteriorates rubber hoses, gaskets, and pump seals; flammable.

F / SC Flowable / Suspension Concentrate Suspension (opaque) Insoluble solids pre-ground into liquid carrier; eliminates dry dust inhalation hazard during loading. Settles during storage (requires vigorous jug shaking); requires continuous tank agitation; abrasive to brass/aluminum nozzle tips.

ME Microencapsulated Suspension of polymer capsules Extended residual activity via slow diffusion; reduces acute dermal handling toxicity to mixer/loader. Severe honeybee hazard : microscopic plastic capsules carry electrostatic charges and match pollen grain sizes, causing foraging bees to transport lethal capsules back to the hive brood; requires agitation.

S / SP Solution / Soluble Powder True Solution Completely dissolves in water; non-abrasive; requires no agitation once in solution. SP creates a severe inhalation dust hazard while measuring and dumping dry bags; concentrates pose severe ocular/dermal splash hazards.

WP Wettable Powder Suspension Inexpensive; lower risk of solvent-induced foliar phytotoxicity than an EC of the same AI. Severe inhalation hazard from airborne dust when scooping and dumping; highly abrasive to nozzles/pumps; requires continuous mechanical agitation ; clogs fine strainers.

WDG / DF Water-Dispersible Granule / Dry Flowable Suspension Formulated as small dry granules that disperse in water; significantly reduces inhalation dust compared to WP. Must be pre-slurried or added to a vigorous tank vortex to disperse; requires continuous mechanical agitation; abrasive to nozzles.

G / P Granule / Pellet Dry application (no water mix) Ready-to-use; zero spray drift hazard; low dermal splash risk; penetrates dense turf/canopies. Bulky; must be calibrated by weight per area ; requires soil moisture or rain/irrigation to release AI; non-target birds and wildlife ingest granules as grit/food.

B Bait Dry matrix / station Highly targeted; active ingredient mixed with attractant food matrix. Attractive to children, pets, domestic animals, and wildlife; must be placed in tamper-resistant bait stations or inaccessible structural voids.

ULV / A Ultra-Low Volume / Aerosol Liquid concentrate / Pressurized gas Delivers extremely fine droplets for large-scale mosquito control or structural crack-and-crevice treatments. Extreme drift potential; specialized application equipment required; high inhalation exposure hazard.

Fumigant Gas-generating solid/liquid/gas Pure gas in pore spaces Penetrates deeply into soil pores, grain masses, structural voids, and rodent burrows where liquids cannot reach. Lethal inhalation hazard to humans and animals; requires specialized respiratory protection (SCBA), Category 303/309 certification, and extensive buffer zones.

Tank Mixing: Physical vs. Chemical Incompatibility and the Jar Test

Applicators frequently combine two or more pesticide products, fertilizers, and adjuvants in a single tank load to save labor and broaden pest control spectrums. However, improper mixing can result in incompatibility .

Incompatibility Types

Physical Incompatibility: The formulations fail to mix physically, resulting in clumping, curdling, phase separation, layering, crystallization, or thick gelatinous sludge ("mayonnaise") that clogs suction screens, lines, and nozzles.

Chemical Incompatibility: The chemical molecules react together, altering the biochemical properties of the active ingredients without necessarily displaying visible physical changes. This leads to antagonism (loss of pesticidal efficacy), synergism (unintended severe crop phytotoxicity), or rapid chemical degradation.

The Standard Jar Test Protocol

Before mixing untested products in a 500-gallon spray tank, the applicator must perform a compatibility jar test :

Use a clean 1-quart glass jar and the exact water carrier source (and temperature) intended for the application.

Add approximately 1 pint (500 mL) of the carrier water to the jar (representing half the final spray volume).

Add proportionate quantities of each product based on their labeled application rates (e.g., approximately 1 teaspoon per quart for a rate of 1 pint per 100 gallons).

Add products in the strict WALES / DLABS sequence, stirring or inverting the jar gently after each chemical addition.

Fill the jar to nearly full with remaining water, add final surfactants or adjuvants, and secure the lid.

Invert the jar 10 times and let it stand undisturbed for 15 to 30 minutes .

Evaluation: If the mixture remains smooth, uniform, or easily resuspended with gentle swirling, the mix is physically compatible. If the jar feels warm (exothermic chemical reaction), forms flakes, curdles, separates into distinct oil/water layers that resist mixing, or forms gritty sediment, the mixture is incompatible and must not be loaded into the spray tank . +--------------------------------------------------------------------------+

  • | COMPATIBILITY JAR TEST OUTCOMES |
  • | |
  • | [COMPATIBLE] [INCOMPATIBLE: Separation / Sludge] |
  • | +------------+ +------------+ |
  • | | | |~~~~~~~~~~~~| <-- Oily / Cream Layer |
  • | | Uniform | | | |
  • | | Dispersion | | Clear | |
  • | | (Pass) | | Water | |
  • | | | |............| <-- Gritty Curds/Flakes |
  • | +------------+ +------------+ |
  • +--------------------------------------------------------------------------+
  • The Standard Tank Mixing Sequence: WALES / DLABS Protocol

Adding products in the wrong sequence is the primary cause of tank mix clumping. When wettable powders are added to a tank that already contains oily emulsifiable concentrates, the oil coats the dry powder particles, preventing them from wetting and dispersing, forming unresolvable sludge. Applicators must adhere to the standardized WALES (or DLABS ) order: +-----------------------------------------------------------------------------+

  • | THE STANDARD WALES SEQUENCE |
  • | |
  • | W -> WETTABLE POWDERS, Dry Flowables & Water-Dispersible Granules (WDG) |
  • | A -> AGITATE thoroughly & add Liquid Flowables / Suspensions (SC / F) |
  • | L -> LIQUID Solubles, Soluble Powders & True Solutions (S / SP) |
  • | E -> EMULSIFIABLE CONCENTRATES (EC) |
  • | S -> SURFACTANTS, Crop Oils, Adjuvants & Soluble Fertilizers |
  • +-----------------------------------------------------------------------------+

Tank Fill & Agitation: Fill the spray tank 1/2 to 3/4 full with clean carrier water and start continuous mechanical or hydraulic agitation.

W (Wettable Powders & Dry Products): Add water-soluble packets, dry flowables (DF), water-dispersible granules (WDG), and wettable powders (WP). Allow these dry products to fully hydrate, wet, and disperse in the water vortex for 3-5 minutes before adding other chemistries.

A (Agitate & Add Suspensions): Maintain vigorous agitation while adding liquid flowables (F) and suspension concentrates (SC).

L (Liquid Solubles & Solutions): Add water-soluble liquid concentrates (S) and soluble powders (SP).

E (Emulsifiable Concentrates): Add emulsifiable concentrates (EC) and microencapsulated formulations (ME).

S (Surfactants & Adjuvants): Add drift control agents, non-ionic surfactants (NIS), crop oil concentrates (COC), and liquid fertilizers. Top off the tank to the final designated volume with water while maintaining continuous agitation throughout transport and spraying.

Adjuvant Classes and Functional Chemistry

An adjuvant is any substance added to a pesticide spray mixture to modify chemical performance, improve physical handling, enhance coverage, or alter physical properties of the spray solution.

Surfactants (Surface Active Agents)

Water molecules have high surface tension, causing spray droplets to stand as spherical beads on waxy leaf surfaces. Surfactants possess a dual chemical structure with a hydrophilic (water-loving) head and a lipophilic (oil-loving) tail . By aligning at the droplet surface, surfactants break water surface tension, flattening the droplet and expanding the contact surface area across the leaf cuticle.

Non-Ionic Surfactants (NIS): Carry no electrical charge. They are universally compatible with most post-emergence herbicides, fungicides, and insecticides, enhancing droplet spreading and foliar absorption without destabilizing the mix.

Crop Oil Concentrates (COC) and Methylated Seed Oils (MSO)

Crop Oil Concentrates (COC): Contain 80-85% petroleum paraffin base oil plus 15-20% non-ionic surfactant. COC dissolves and softens the thick, waxy cutin layer of weed leaves, significantly increasing the penetration rate of systemic herbicides.

Operational Warning: In hot (>85-90°F), bright sunny weather, COCs can cause severe phytotoxic burn to desirable crops.

Methylated Seed Oils (MSO): Chemically modified vegetable oils (e.g., methylated soybean oil) providing even more aggressive cuticular penetration on drought-stressed weeds with thickened waxy barriers.

Utility and Water Conditioning Adjuvants

Buffers and Acidifiers: In many eastern and southern Colorado water districts, spray water is hard and alkaline ( p H > 7.5 − 8.5 pH > 7.5-8.5 p H > 7.5 − 8.5 ). Under alkaline conditions, sensitive pesticide active ingredients (especially organophosphates, carbamates, and pyrethroids) undergo rapid alkaline hydrolysis —a chemical degradation reaction that breaks chemical bonds and destroys insecticidal efficacy within hours inside the spray tank. Acidifying buffers lower and stabilize spray tank pH between 5.5 and 6.5, preventing hydrolysis.

Drift Retardants / Deposition Aids: Long-chain polymer thickeners that increase liquid viscosity, reducing the formation of driftable fine droplets (<105-150 microns) and ensuring that spray particles settle directly onto target foliage.

Stickers and Extenders: Adhesives that bind pesticide deposits tightly to leaf surfaces, preventing spray washoff from heavy irrigation, rainfall, or mechanical abrasion, while shielding active ingredients from ultraviolet (UV) photodegradation.

Defoamers (Anti-Foaming Agents): Silicon-based agents (e.g., dimethicone) added to suppress excessive foaming caused by vigorous tank agitation of surfactant-rich mixtures.

Loading diagram... WALES Standard Tank Mixing Sequence