Study guide

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones

Colorado Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: State Laws, Regulations & CCWP Certification

1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting

2 Chapter 2: Source Water & Drinking Water Treatment Processes

2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle

3 Chapter 3: Disinfection & Chemical Addition

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices

4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance

4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management

5 Chapter 5: Wastewater Treatment Principles & Biological Processes

5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects

6 Chapter 6: Advanced Wastewater Treatment & Solids Management

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84

7 Chapter 7: Water Distribution Systems

7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems

8 Chapter 8: Wastewater Collection Systems

8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment

9 Chapter 9: Pumps, Motors & Utility Mechanics

9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control

10 Chapter 10: Laboratory Analysis & Water Quality Monitoring

10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)

11 Chapter 11: Operator Mathematics & Applied Calculations

11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance

12 Chapter 12: Safety, Emergency Operations & Compliance

12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones

Key Takeaways Explain This Topic AI

Biological nitrification is a two-step obligate aerobic autotrophic process requiring 4.57 lbs O2 and consuming 7.14 lbs of alkalinity as CaCO3 per lb of NH4-N oxidized to NO3-N.

Denitrification is an anoxic heterotrophic process where facultative bacteria use nitrate as an electron acceptor under low DO (<0.2 mg/L), recovering 3.57 lbs of alkalinity per lb of NO3-N reduced to N2 gas.

Nitrification kinetics are highly sensitive to temperature and pH (optimal 7.5–8.5), requiring longer Mean Cell Residence Times (MCRT / SRT of 8–15 days in warm weather and 15–25+ days in cold Colorado winter conditions).

The Modified Ludzack-Ettinger (MLE) process uses an internal mixed liquor recycle (IMLR / NRCY of 100%–400% Q) from the aerobic zone back to the pre-anoxic zone, utilizing raw wastewater BOD as the electron donor.

The 4-Stage Bardenpho process incorporates a secondary post-anoxic basin and re-aeration basin to achieve Total Nitrogen (TN) effluent concentrations below 3.0 mg/L without supplemental carbon.

Last updated: August 2026

Biological Nutrient Removal: Nitrogen Transformations & Process Control

Discharge of nitrogen compounds into Colorado's receiving waters creates severe environmental and public health hazards. Ammonia nitrogen ( N H 3 / N H 4 + NH_3 / NH_4^+ N H 3 ​ / N H 4 + ​ ) exerts an immediate dissolved oxygen demand on surface streams and exhibits acute toxicity to cold-water salmonid fish species at ultra-low concentrations. Nitrate nitrogen ( N O 3 − NO_3^- N O 3 − ​ ) stimulates eutrophication, accelerates nuisance aquatic macrophyte growth, and violates the primary drinking water standard Maximum Contaminant Level (MCL) of 10.0 mg/L N O 3 - N NO_3\text{-}N N O 3 ​ - N under Colorado Regulation 11. Under Colorado's Nutrients Management Control Regulation (Regulation 85 / 5 CCR 1002-85) and stream classification standards ( Regulation 31 / 5 CCR 1002-31 ), domestic wastewater treatment facilities face stringent effluent nitrogen limits requiring advanced Biological Nutrient Removal (BNR).

1. Nitrogen Forms & The Wastewater Nitrogen Cycle

Nitrogen exists in domestic wastewater in four primary chemical oxidation states, continually transforming through biological assimilation, mineralization, oxidation, and reduction pathways: +-----------------------------------------------------------------------------------------+

  • | WASTEWATER NITROGEN CYCLE |
  • +-----------------------------------------------------------------------------------------+
  • | Raw Influent: Organic Nitrogen (Urea, Proteins, Amino Acids) |
  • | │ |
  • | ▼ [ Ammonification / Hydrolysis by Heterotrophs ] |
  • | Ammonia / Ammonium (NH3 / NH4+) ─── Total Kjeldahl Nitrogen (TKN = Org-N + NH4-N) |
  • | │ |
  • | ▼ [ Nitrification Step 1: Nitrosomonas (AOB) + O2 ] |
  • | Nitrite (NO2-) |
  • | │ |
  • | ▼ [ Nitrification Step 2: Nitrobacter / Nitrospira (NOB) + O2 ] |
  • | Nitrate (NO3-) |
  • | │ |
  • | ▼ [ Denitrification: Facultative Heterotrophs + Carbon Source (DO < 0.2 mg/L) ] |
  • | Nitrogen Gas (N2 ↑) ── Released harmlessly into atmosphere (78% of ambient air) |
  • +-----------------------------------------------------------------------------------------+
  • Nitrogen Analytical Fractions

Organic Nitrogen : Bound organically in fecal matter, food waste, proteins, and cellular biomass.

Ammonia Nitrogen ( N H 3 / N H 4 + NH_3 / NH_4^+ N H 3 ​ / N H 4 + ​ ) : The reduced inorganic form resulting from urea hydrolysis and biological deamination. In aqueous solution, ammonia exists in a chemical equilibrium governed by temperature and pH: N H 3 + H 2 O ⇌ N H 4 + + O H − or N H 4 + ⇌ N H 3 + H + ( p K a = 9.25 at 25 ∘ C ) NH_3 + H_2O \rightleftharpoons NH_4^+ + OH^- \quad \text{or} \quad NH_4^+ \rightleftharpoons NH_3 + H^+ \quad (pK_a = 9.25 \text{ at } 25^\circ\text{C}) N H 3 ​ + H 2 ​ O ⇌ N H 4 + ​ + O H − or N H 4 + ​ ⇌ N H 3 ​ + H + ( p K a ​ = 9.25 at 2 5 ∘ C )

Ammonium Ion ( N H 4 + NH_4^+ N H 4 + ​ ) : Ionized, non-volatile, and non-toxic to fish at typical neutral pH levels.

Un-ionized Ammonia ( N H 3 NH_3 N H 3 ​ ) : Neutral gas molecule that readily diffuses across gill membranes of fish, causing respiratory failure and acute aquatic mortality. As pH or temperature rises, the equilibrium shifts sharply toward toxic un-ionized N H 3 NH_3 N H 3 ​ .

Total Kjeldahl Nitrogen (TKN) : The analytical sum of organic nitrogen and ammonia nitrogen ( TKN = Org-N + N H 4 - N \text{TKN} = \text{Org-N} + NH_4\text{-}N TKN = Org-N + N H 4 ​ - N ). Typical municipal raw wastewater exhibits a TKN of 30 – 50 mg/L 30\text{--}50\text{ mg/L} 30 – 50 mg/L .

Nitrite Nitrogen ( N O 2 − NO_2^- N O 2 − ​ ) : A transient, unstable intermediate oxidized form (typically < 0.1 – 0.5 mg/L <0.1\text{--}0.5\text{ mg/L} < 0.1 – 0.5 mg/L in stable systems). Nitrite exerts significant chlorine demand ( 5.0 lbs C l 2 5.0\text{ lbs } Cl_2 5.0 lbs C l 2 ​ per lb N O 2 - N NO_2\text{-}N N O 2 ​ - N ) during final disinfection.

Nitrate Nitrogen ( N O 3 − NO_3^- N O 3 − ​ ) : The fully oxidized end product of aerobic nitrification.

Total Nitrogen (TN) : The sum of all inorganic and organic forms: TN = TKN + N O 2 - N + N O 3 - N \text{TN} = \text{TKN} + NO_2\text{-}N + NO_3\text{-}N TN = TKN + N O 2 ​ - N + N O 3 ​ - N .

2. Biochemistry & Stoichiometry of Nitrification

Biological nitrification is a two-step aerobic conversion of ammonia to nitrate mediated by specialized chemoautotrophic bacteria (organisms that derive energy from the oxidation of inorganic nitrogen and obtain cellular carbon from inorganic carbon dioxide / bicarbonate):

Step 1: Ammonia Oxidation to Nitrite

Mediated primarily by Ammonia-Oxidizing Bacteria (AOB) , predominantly the genus Nitrosomonas : 2 N H 4 + + 3 O 2 → Nitrosomonas 2 N O 2 − + 4 H + + 2 H 2 O + Energy 2 NH_4^+ + 3 O_2 \xrightarrow{\text{Nitrosomonas}} 2 NO_2^- + 4 H^+ + 2 H_2O + \text{Energy} 2 N H 4 + ​ + 3 O 2 ​ Nitrosomonas ​ 2 N O 2 − ​ + 4 H + + 2 H 2 ​ O + Energy

Step 2: Nitrite Oxidation to Nitrate

Mediated by Nitrite-Oxidizing Bacteria (NOB) , including Nitrobacter and Nitrospira : 2 N O 2 − + O 2 → Nitrobacter 2 N O 3 − + Energy 2 NO_2^- + O_2 \xrightarrow{\text{Nitrobacter}} 2 NO_3^- + \text{Energy} 2 N O 2 − ​ + O 2 ​ Nitrobacter ​ 2 N O 3 − ​ + Energy

Combined Overall Nitrification Reaction N H 4 + + 2 O 2 ⟶ N O 3 − + 2 H + + H 2 O NH_4^+ + 2 O_2 \longrightarrow NO_3^- + 2 H^+ + H_2O N H 4 + ​ + 2 O 2 ​ ⟶ N O 3 − ​ + 2 H + + H 2 ​ O +-----------------------------------------------------------------------------------------+

  • | CRITICAL NITRIFICATION STOICHIOMETRIC CONSTANTS |
  • +-----------------------------------------------------------------------------------------+
  • | • Oxygen Demand: 4.57 lbs O2 required per 1.0 lb NH4-N oxidized |
  • | (3.43 lbs O2 for Nitrosomonas + 1.14 lbs O2 for Nitrobacter) |
  • | • Alkalinity Consumed: 7.14 lbs CaCO3 destroyed per 1.0 lb NH4-N oxidized |
  • | (Due to release of 2 moles of H+ per mole of NH4+ oxidized) |
  • | • Biomass Yield: 0.15 - 0.20 lbs dry volatile solids produced per lb NH4-N |
  • +-----------------------------------------------------------------------------------------+
  • Environmental & Operational Controls for Nitrification

Parameter Optimum Operating Range Critical Thresholds & Inhibitory Limits

Dissolved Oxygen (DO) 2.0 – 3.0 mg/L 2.0\text{--}3.0\text{ mg/L} 2.0 – 3.0 mg/L Rates drop significantly below 1.5 mg/L 1.5\text{ mg/L} 1.5 mg/L ; complete kinetic shutdown < 0.5 mg/L <0.5\text{ mg/L} < 0.5 mg/L .

pH 7.5 – 8.5 7.5\text{--}8.5 7.5 – 8.5 Rates decline rapidly below 7.2 7.2 7.2 ; severe inhibition at pH < 6.5 \text{pH} < 6.5 pH < 6.5 ; complete cessation at pH < 6.0 \text{pH} < 6.0 pH < 6.0 .

Residual Alkalinity 50 – 100 mg/L as CaCO 3 50\text{--}100\text{ mg/L as } \text{CaCO}_3 50 – 100 mg/L as CaCO 3 ​ Minimum buffer needed in aeration basin effluent to prevent rapid pH depression.

Temperature 20 ∘ C– 30 ∘ C 20^\circ\text{C}\text{--}30^\circ\text{C} 2 0 ∘ C – 3 0 ∘ C Kinetics drop by ~50% for every 10 ∘ C 10^\circ\text{C} 1 0 ∘ C drop; requires increasing SRT dramatically below 12 ∘ C 12^\circ\text{C} 1 2 ∘ C .

Solids Retention Time (SRT) 8 – 15 days 8\text{--}15\text{ days} 8 – 15 days (Warm weather) Must increase to 15 – 25 + days 15\text{--}25+\text{ days} 15 – 25 + days in Colorado winter conditions to prevent AOB washout.

Toxic Inhibitors Zero or minimal Free ammonia ( > 10 – 150 mg/L >10\text{--}150\text{ mg/L} > 10 – 150 mg/L ), un-ionized nitrous acid ( > 0.2 mg/L >0.2\text{ mg/L} > 0.2 mg/L ), heavy metals ( C u , Z n , N i , C r Cu, Zn, Ni, Cr C u , Z n , N i , C r ).

3. Biochemistry & Stoichiometry of Denitrification

Denitrification is the biological reduction of nitrate to harmless dinitrogen gas ( N 2 ↑ N_2\uparrow N 2 ​ ↑ ) executed by widespread facultative heterotrophic bacteria (such as Pseudomonas , Paracoccus , Alcaligenes , and Bacillus ). When dissolved oxygen is depleted ( D O < 0.2 mg/L DO < 0.2\text{ mg/L} D O < 0.2 mg/L ), these organisms switch their metabolic respiratory pathways, utilizing nitrate ( N O 3 − NO_3^- N O 3 − ​ ) or nitrite ( N O 2 − NO_2^- N O 2 − ​ ) instead of dissolved oxygen as their terminal electron acceptor to metabolize organic carbon.

The Denitrification Reduction Cascade N O 3 − ( Nitrate ) ⟶ N O 2 − ( Nitrite ) ⟶ N O ( Nitric Oxide ) ⟶ N 2 O ( Nitrous Oxide ) ⟶ N 2 ↑ ( Dinitrogen Gas ) NO_3^- \;(\text{Nitrate}) \longrightarrow NO_2^- \;(\text{Nitrite}) \longrightarrow NO \;(\text{Nitric Oxide}) \longrightarrow N_2O \;(\text{Nitrous Oxide}) \longrightarrow N_2\uparrow \;(\text{Dinitrogen Gas}) N O 3 − ​ ( Nitrate ) ⟶ N O 2 − ​ ( Nitrite ) ⟶ NO ( Nitric Oxide ) ⟶ N 2 ​ O ( Nitrous Oxide ) ⟶ N 2 ​ ↑ ( Dinitrogen Gas )

Stoichiometric Principles & Carbon Demands

Denitrification requires an electron donor (organic carbon source). This can be provided by the readily biodegradable chemical oxygen demand (rbCOD / BOD) naturally present in raw wastewater, or via supplemental external carbon sources such as methanol ( C H 3 O H CH_3OH C H 3 ​ O H ) , sodium acetate ( C H 3 C O O N a CH_3COONa C H 3 ​ COON a ) , glycerin , or micro-brewing byproducts .

Using methanol as the carbon source, the overall balanced redox reaction is: 6 N O 3 − + 5 C H 3 O H + Carbonic Acid ⟶ 3 N 2 ↑ + 5 C O 2 + 7 H 2 O + 6 O H − + Biomass 6 NO_3^- + 5 CH_3OH + \text{Carbonic Acid} \longrightarrow 3 N_2\uparrow + 5 CO_2 + 7 H_2O + 6 OH^- + \text{Biomass} 6 N O 3 − ​ + 5 C H 3 ​ O H + Carbonic Acid ⟶ 3 N 2 ​ ↑ + 5 C O 2 ​ + 7 H 2 ​ O + 6 O H − + Biomass +-----------------------------------------------------------------------------------------+

  • | CRITICAL DENITRIFICATION RECOVERY CONSTANTS |
  • +-----------------------------------------------------------------------------------------+
  • | • Alkalinity Recovery: 3.57 lbs CaCO3 produced per 1.0 lb NO3-N reduced |
  • | (Recovers exactly 50% of the alkalinity destroyed during |
  • | nitrification: 3.57 / 7.14 = 50.0%) |
  • | • Oxygen Credit: 2.86 lbs equivalent O2 credit per 1.0 lb NO3-N reduced |
  • | (Reduces aeration blower power demand in downstream basins) |
  • | • Carbon Requirement: 3.0 - 4.5 lbs BOD (or 2.47 lbs pure methanol) per lb NO3-N |
  • +-----------------------------------------------------------------------------------------+
  • 4. Biological Nutrient Removal Configurations

To achieve simultaneous carbon oxidation, nitrification, and denitrification within an activated sludge process, wastewater treatment plants employ multi-stage zoned reactor configurations featuring designated anoxic zones (un-aerated, mechanically mixed, D O < 0.2 mg/L DO < 0.2\text{ mg/L} D O < 0.2 mg/L , nitrate present) and aerobic zones (aerated, D O ≥ 2.0 mg/L DO \ge 2.0\text{ mg/L} D O ≥ 2.0 mg/L ).

The Modified Ludzack-Ettinger (MLE) Process

The MLE process is the most widely utilized pre-anoxic BNR configuration in Colorado:

Pre-Anoxic Basin : Positioned at the head of the secondary treatment process. Raw wastewater (rich in organic carbon / BOD) enters this basin alongside two recycled streams: Return Activated Sludge (RAS) from the clarifiers and a high-rate Internal Mixed Liquor Recycle (IMLR / NRCY) pumped directly from the tail end of the aerobic basin.

Aerobic Basin : Mixed liquor from the pre-anoxic basin flows into the aerobic zone, where heterotrophs oxidize remaining carbonaceous BOD and autotrophic nitrifiers ( Nitrosomonas and Nitrobacter ) convert ammonia to nitrate.

Internal Mixed Liquor Recycle (IMLR) : Pumps nitrate-rich mixed liquor back to the pre-anoxic zone at recycle rates of 100 % – 400 % 100\%\text{--}400\% 100% – 400% of forward influent flow ( 1.0 – 4.0 × Q 1.0\text{--}4.0 \times Q 1.0 – 4.0 × Q ) .

Performance : Achieves 70 % – 85 % 70\%\text{--}85\% 70% – 85% Total Nitrogen removal , yielding typical effluent TN concentrations of 5.0 – 8.0 mg/L 5.0\text{--}8.0\text{ mg/L} 5.0 – 8.0 mg/L .

The 4-Stage Bardenpho Process

For facilities required to meet ultra-low effluent total nitrogen standards ( T N < 3.0 mg/L TN < 3.0\text{ mg/L} TN < 3.0 mg/L ), the 4-Stage Bardenpho configuration adds secondary polishing zones:

Primary Anoxic Zone : Uses raw influent rbCOD and high-rate IMLR ( 300 % – 400 % Q 300\%\text{--}400\% Q 300% – 400% Q ) for primary denitrification (removes ~70% of nitrogen).

Primary Aerobic Zone : Provides complete carbon oxidation and full nitrification of ammonia to nitrate.

Secondary Post-Anoxic Zone : Without raw carbon available, heterotrophs carry out endogenous denitrification (utilizing carbon from decaying bacterial cell mass) or feed on metered supplemental carbon (methanol/acetate) to reduce residual nitrate down to < 1.0 – 2.0 mg/L <1.0\text{--}2.0\text{ mg/L} < 1.0 – 2.0 mg/L .

Secondary Re-Aeration Zone : A small aerobic zone ( 5 – 15 minutes 5\text{--}15\text{ minutes} 5 – 15 minutes hydraulic detention time) that strips nitrogen gas bubbles from the mixed liquor, raises DO to 4.0 – 6.0 mg/L 4.0\text{--}6.0\text{ mg/L} 4.0 – 6.0 mg/L , and oxidizes any remaining ammonia or residual carbon before the mixed liquor enters the secondary clarifiers, preventing clarifier septicity and sludge floating. +-----------------------------------------------------------------------------------------+

  • | 4-STAGE BARDENPHO SYSTEM LAYOUT |
  • +-----------------------------------------------------------------------------------------+
  • | +----------------------- IMLR (300-400% Q) -----------------------+ |
  • | | | |
  • | Influent ▼ ┌──────────────┐ ┌─────────────┐ │ |
  • | ────────► [1. Pre-Anoxic] ───► │2. 1st Aerobic│ ──────────► │3. 2nd Anoxic│ ─┴────────┐ |
  • | (Mixed) └──────────────┘ (Nitrate) │ (Endogenous │ │ |
  • | ▲ (Nitrify) │ / Methanol)│ │ |
  • | │ └─────────────┘ │ |
  • | │ │ │ |
  • | │ ▼ ▼ |
  • | │ Effluent ◄─── [Secondary Clarifier] ◄─── [4. Re-Aeration] |
  • | │ │ (DO Strip) |
  • | +───────────── RAS (50-100% Q) ────+ |
  • +-----------------------------------------------------------------------------------------+
  • 5. Operational Troubleshooting & Nitrogen Process Control
  • Clumping / Rising Sludge in Secondary Clarifiers

When mixed liquor entering the secondary clarifiers contains elevated nitrate ( N O 3 - N > 5 – 8 mg/L NO_3\text{-}N > 5\text{--}8\text{ mg/L} N O 3 ​ - N > 5 – 8 mg/L ) and settles into an anoxic sludge blanket ( D O = 0 mg/L DO = 0\text{ mg/L} D O = 0 mg/L ), denitrifying bacteria reduce nitrate to dinitrogen gas ( N 2 N_2 N 2 ​ ).

Tiny micro-bubbles of N 2 N_2 N 2 ​ gas become trapped within the settling biological floc, decreasing its bulk density until large, brown clumps of sludge float to the clarifier surface (known as rising sludge or clumping ).

Diagnostic vs. Bulking Sludge: Rising sludge is distinguished from filamentous bulking because the mixed liquor exhibits a normal, rapid initial settling rate (good Sludge Volume Index / SVI < 120 mL/g \text{SVI} < 120\text{ mL/g} SVI < 120 mL/g ), but floats 30 to 90 minutes later as gas accumulates.

Corrective Actions:

Increase the Return Activated Sludge (RAS) pumping rate to reduce sludge blanket detention time in the clarifier.

Increase the IMLR recycle rate to ensure more nitrate is denitrified in the upstream anoxic basin.

Increase DO in the aerobic basin tail / re-aeration basin to purge dissolved nitrogen gas and maintain positive DO in the clarifier blanket.

Alkalinity Depletion & pH Crash

Because nitrification destroys 7.14 lbs of alkalinity as CaCO 3 per lb N H 4 - N 7.14\text{ lbs of alkalinity as } \text{CaCO}_3\text{ per lb } NH_4\text{-}N 7.14 lbs of alkalinity as CaCO 3 ​ per lb N H 4 ​ - N , poorly buffered wastewater (common in Colorado mountain streams with natural alkalinity < 50 – 80 mg/L <50\text{--}80\text{ mg/L} < 50 – 80 mg/L ) will experience rapid pH drops. If pH drops below 6.8 6.8 6.8 , nitrification slows; if it drops below 6.0 6.0 6.0 , nitrification halts completely.

Corrective Actions:

Dose supplemental chemical alkalinity into the aeration basin (Sodium Bicarbonate N a H C O 3 NaHCO_3 N a H C O 3 ​ , Soda Ash N a 2 C O 3 Na_2CO_3 N a 2 ​ C O 3 ​ , Hydrated Lime C a ( O H ) 2 Ca(OH)_2 C a ( O H ) 2 ​ , or Magnesium Hydroxide M g ( O H ) 2 Mg(OH)_2 M g ( O H ) 2 ​ ).

Optimize upstream anoxic denitrification to maximize natural alkalinity recovery ( 3.57 lbs CaCO 3 / lb N O 3 - N 3.57\text{ lbs } \text{CaCO}_3\text{ / lb } NO_3\text{-}N 3.57 lbs CaCO 3 ​ / lb N O 3 ​ - N ).

6. Worked Stoichiometric Calculation Example

A domestic wastewater treatment facility treating a flow of 3.0 MGD 3.0\text{ MGD} 3.0 MGD has an influent ammonia concentration of 32.0 mg/L N H 4 - N 32.0\text{ mg/L } NH_4\text{-}N 32.0 mg/L N H 4 ​ - N and an effluent target of 1.0 mg/L N H 4 - N 1.0\text{ mg/L } NH_4\text{-}N 1.0 mg/L N H 4 ​ - N . Raw wastewater alkalinity entering the aeration basin is 180.0 mg/L as CaCO 3 180.0\text{ mg/L as } \text{CaCO}_3 180.0 mg/L as CaCO 3 ​ .

Step 1: Calculate Total Ammonia Mass Oxidized per Day Δ N H 4 - N = 32.0 mg/L − 1.0 mg/L = 31.0 mg/L \Delta NH_4\text{-}N = 32.0\text{ mg/L} - 1.0\text{ mg/L} = 31.0\text{ mg/L} Δ N H 4 ​ - N = 32.0 mg/L − 1.0 mg/L = 31.0 mg/L Mass of N H 4 - N oxidized (lbs/day) = Flow (MGD) × Δ Concentration (mg/L) × 8.34 \text{Mass of } NH_4\text{-}N \text{ oxidized (lbs/day)} = \text{Flow (MGD)} \times \Delta \text{Concentration (mg/L)} \times 8.34 Mass of N H 4 ​ - N oxidized (lbs/day) = Flow (MGD) × Δ Concentration (mg/L) × 8.34 Mass = 3.0 × 31.0 × 8.34 = 775.62 lbs/day N H 4 - N \text{Mass} = 3.0 \times 31.0 \times 8.34 = 775.62\text{ lbs/day } NH_4\text{-}N Mass = 3.0 × 31.0 × 8.34 = 775.62 lbs/day N H 4 ​ - N

Step 2: Calculate Daily Oxygen Demand for Nitrification Oxygen Demand = 775.62 lbs/day N H 4 - N × 4.57 lbs O 2 / lb N H 4 - N = 3 , 544.58 lbs O 2 / day \text{Oxygen Demand} = 775.62\text{ lbs/day } NH_4\text{-}N \times 4.57\text{ lbs } O_2 / \text{lb } NH_4\text{-}N = 3,544.58\text{ lbs } O_2 / \text{day} Oxygen Demand = 775.62 lbs/day N H 4 ​ - N × 4.57 lbs O 2 ​ / lb N H 4 ​ - N = 3 , 544.58 lbs O 2 ​ / day

Step 3: Calculate Total Alkalinity Consumed Alkalinity Consumed = 775.62 lbs/day N H 4 - N × 7.14 lbs CaCO 3 / lb N H 4 - N = 5 , 537.93 lbs CaCO 3 / day \text{Alkalinity Consumed} = 775.62\text{ lbs/day } NH_4\text{-}N \times 7.14\text{ lbs } \text{CaCO}_3 / \text{lb } NH_4\text{-}N = 5,537.93\text{ lbs } \text{CaCO}_3 / \text{day} Alkalinity Consumed = 775.62 lbs/day N H 4 ​ - N × 7.14 lbs CaCO 3 ​ / lb N H 4 ​ - N = 5 , 537.93 lbs CaCO 3 ​ / day Alkalinity Concentration Destroyed (mg/L) = 31.0 mg/L N H 4 - N × 7.14 = 221.34 mg/L as CaCO 3 \text{Alkalinity Concentration Destroyed (mg/L)} = 31.0\text{ mg/L } NH_4\text{-}N \times 7.14 = 221.34\text{ mg/L as } \text{CaCO}_3 Alkalinity Concentration Destroyed (mg/L) = 31.0 mg/L N H 4 ​ - N × 7.14 = 221.34 mg/L as CaCO 3 ​

Step 4: Evaluate Residual Alkalinity & Chemical Need Residual Raw Alkalinity = 180.0 mg/L − 221.34 mg/L = − 41.34 mg/L \text{Residual Raw Alkalinity} = 180.0\text{ mg/L} - 221.34\text{ mg/L} = -41.34\text{ mg/L} Residual Raw Alkalinity = 180.0 mg/L − 221.34 mg/L = − 41.34 mg/L

Without chemical addition or anoxic denitrification recovery, the facility will exhaust all buffering capacity, causing a total pH crash and process failure. To maintain a safe residual of 60.0 mg/L as CaCO 3 60.0\text{ mg/L as } \text{CaCO}_3 60.0 mg/L as CaCO 3 ​ , the operator must supply supplemental alkalinity or implement an MLE anoxic zone to recover 3.57 lbs CaCO 3 / lb N O 3 - N 3.57\text{ lbs } \text{CaCO}_3 / \text{lb } NO_3\text{-}N 3.57 lbs CaCO 3 ​ / lb N O 3 ​ - N reduced.

Loading diagram... Modified Ludzack-Ettinger (MLE) Biological Nitrogen Removal Process