Study guide
6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
Key Takeaways Explain This Topic AI
Compliance samples must be taken at the exact point the CDPS permit designates, because data collected anywhere else is not compliance data.
Rapid infiltration basins require alternating loading and resting cycles plus surface discing, because continuous flooding seals the basin with an anaerobic clogging mat.
Under Colorado prior appropriation, most native-supply effluent must be returned to the stream, and only transmountain, nontributary, or decreed water may be reused to extinction.
Reclaimed water systems require complete physical separation from the potable system, purple pipe and signage, backflow protection, and cross-connection surveys of reuse customers.
A failed whole effluent toxicity test triggers a toxicity identification and reduction evaluation, and ammonia, residual chlorine, and industrial metals are the usual causes at domestic plants.
Last updated: August 2026
Where the treated water goes
WPI's Treatment Process Evaluation outline lists effluent disposal: surface water discharge and rapid infiltration basin (RIB) and solids disposal: landfill as items an operator evaluates and adjusts. In Colorado those choices are shaped by two forces that do not exist in most states: prior appropriation water law , under which effluent is often legally owed to a downstream senior right, and chronic scarcity , which makes reuse valuable.
Surface water discharge
The default pathway. Treated effluent passes through the outfall to a receiving stream under a CDPS permit issued under Regulation 61, with limits derived as described in the Colorado regulatory chapter.
Operational elements the operator manages:
Outfall structure and diffuser. Kept clear of debris and sediment, and inspected after high flows. Erosion at the outfall is a permit and a public relations issue.
Compliance sampling point. The permit designates exactly where the sample is taken, and samples taken anywhere else are not compliance data.
Mixing zone. The permit's water-quality-based limits assume a defined mixing zone in the receiving stream. Operators do not manage the mixing zone, but they should understand that low stream flow shrinks available dilution — which is why summer and drought conditions often coincide with the tightest effective limits.
Effluent dissolved oxygen and temperature. Many Colorado permits carry minimum DO and maximum temperature limits protective of coldwater aquatic life.
Whole effluent toxicity (WET) testing. Periodic bioassays on Ceriodaphnia and fathead minnow. A failed WET test triggers a toxicity identification and reduction evaluation , and the most common culprits at domestic plants are ammonia, residual chlorine, metals from an industrial user, and surfactants.
Land treatment and rapid infiltration basins
A rapid infiltration basin (RIB) applies effluent to permeable soil at high rates, allowing it to percolate to groundwater. Additional treatment happens in the soil column through filtration, adsorption, and biological activity. RIBs suit sandy and gravelly soils with adequate depth to groundwater and are common in parts of eastern and southern Colorado.
Operating requirements:
Loading and resting cycles. Basins are flooded, then rested and allowed to dry. The drying period restores aerobic conditions and oxidizes accumulated organics; continuous flooding drives the basin anaerobic and seals the surface.
Rotation among cells so each gets its resting period.
Surface maintenance. Discing, scarifying, or raking the basin floor breaks up the clogging mat of solids and biological growth that forms during flooding. Falling infiltration rate is the symptom that maintenance is overdue.
Vegetation management to prevent root intrusion and to control mosquitoes.
Groundwater monitoring wells upgradient and downgradient, with nitrate as the parameter of greatest concern.
Winter operation in Colorado can be limited by frozen basin surfaces, so storage or an alternate outlet is required.
Other land treatment methods include slow rate application to a crop, and overland flow across gently sloped, vegetated terraces with collection at the toe.
Evaporation, storage, and no-discharge
Some Colorado facilities operate on a total containment or evaporative basis, particularly small and industrial systems in arid areas. Total containment lagoons must be sized on a water balance of inflow plus precipitation minus evaporation and seepage, and they must be lined to prevent groundwater impact. The operator's job is level management — sufficient freeboard for the wet season and for design storms — and monitoring for leakage.
Water reuse in Colorado
Reuse is regulated in Colorado under Regulation 84 (Reclaimed Water Control Regulation) , with the reclaimed water treatment facility itself classified under Regulation 100 section 100.6. Two things must be true before a utility can reuse effluent: the water must be legally reusable , and it must meet the quality category for the intended use.
The legal side is genuinely Colorado-specific. Under prior appropriation, water that originated in the stream system and was diverted under a native right generally must be returned to the stream for downstream senior appropriators; it is single-use water. Only certain water may be used to extinction — typically transmountain (transbasin) imported water , nontributary groundwater , and water for which a decreed augmentation plan or reuse decree exists. Denver Water's recycled water system, for example, is built on transmountain and reusable supplies. An operator does not make these determinations, but should understand that "we have effluent, so we can reuse it" is legally wrong in Colorado more often than it is right.
The quality side is category based. Regulation 84 defines categories of use with corresponding treatment and monitoring requirements, running from restricted-access irrigation through unrestricted urban irrigation, industrial uses, and toilet flushing. Higher categories require greater treatment reliability, tighter turbidity and disinfection standards, and more frequent monitoring.
Non-potable distribution requirements that operators enforce daily:
Complete physical separation from the potable system. There is no acceptable cross connection , and the two systems are never valved together.
Purple (lavender) pipe, fittings, valve boxes, and signage identifying reclaimed water, per industry convention.
Backflow protection on the potable side of any facility served by both systems, typically a reduced pressure principle assembly.
Cross-connection surveys of reuse customers, since an on-site plumbing cross connection between the two systems is the principal risk.
Public notification and hose bib control to prevent unintended potable consumption.
Potable reuse is emerging in Colorado. Indirect potable reuse discharges highly treated water to an environmental buffer such as a reservoir or aquifer before it is withdrawn and treated again. Direct potable reuse introduces advanced-treated water into a raw water supply or directly to a treatment plant. Both rely on multiple advanced barriers — typically microfiltration or ultrafiltration, reverse osmosis, advanced oxidation with ultraviolet light and hydrogen peroxide, and engineered storage — plus continuous online monitoring with automatic diversion when any critical control point fails.
Solids disposal
The other end of the plant. Options and their controls:
Land application of biosolids under Regulation 64, with site approval, metals and pathogen requirements, agronomic loading rates, buffer distances, and crop and grazing restrictions for Class B material.
Landfill. Requires a paint filter liquids test pass, meaning no free liquids, and the landfill's own acceptance criteria. Simple but forgoes the nutrient value.
Surface disposal and monofills on dedicated sites, with their own Part 503 requirements.
Incineration , subject to air permitting and rarely used at Colorado's plant sizes.
Composting with a bulking agent to produce a Class A product.
The operator's recurring duties across all of these are the same: know where the material is going, know the analytical characterization that authorizes it to go there, meter and record the quantity, and keep the manifests. WPI lists maintaining and evaluating operating records and completing required regulatory reports as job tasks, and disposal records are the most commonly audited of them all.