Study guide
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2)
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2)
Key Takeaways Explain This Topic AI
Colorado Revised Statutes (C.R.S.) Title 25, Article 9 creates the ten-member Water and Wastewater Facility Operators Certification Board (WWFOCB), appointed by the Governor to four-year terms.
Regulation 100 (5 CCR 1003-2), effective April 15, 2024, governs classification, qualification, examination, renewal, and discipline for all Colorado Certified Water Professionals (CCWP).
Colorado uses Water Professionals International (WPI) standardized exams of 100 scored questions with a minimum passing score of 70 percent, delivered by PSI at test centers or by remote proctoring.
Certification by examination costs a $50 CCWP application fee plus a $104 exam fee paid to PSI; renewal costs $85 and a late renewal adds a $100 late fee.
The Board may reprimand an operator, suspend a certificate for up to three years, or revoke it, after which the operator may not reapply in that category for three years.
Last updated: August 2026
Statutory Authority & Purpose of Regulation 100
In the State of Colorado, the operation of water treatment facilities, domestic and industrial wastewater treatment plants, water distribution networks, and wastewater collection systems is legally restricted to certified personnel. The foundational statutory authority for this mandate resides in the Colorado Revised Statutes (C.R.S.) Title 25, Article 9 (Water and Wastewater Facility Operators Act). This statute establishes the Water and Wastewater Facility Operators Certification Board (WWFOCB) and charges it with establishing criteria to ensure that all individuals possessing direct operational control over public water infrastructure demonstrate verified technical competency.
To execute this statutory mandate, the Board promulgated Regulation 100 (5 CCR 1003-2) , formally titled the Water and Wastewater Facility Operators Certification Board - Water and Wastewater Facility Operators Certification Requirements . The primary objective of Regulation 100 is the protection of public health, the safeguarding of environmental quality, and the preservation of the beneficial uses of Colorado's receiving waters (rivers, streams, lakes, and drinking water aquifers). Because Colorado sits at the headwaters of several major river basins—including the Colorado, South Platte, Arkansas, and Rio Grande rivers—downstream states and local communities rely directly on the operational integrity maintained by Colorado's certified water and wastewater operators.
Structural Hierarchy: Board vs. Division vs. CCWP
Navigating Colorado's regulatory framework requires understanding the distinct roles played by the rule-making board, the administrative state agency, and the professional certification program:
The Board (WWFOCB): A ten-member body appointed by the Governor under § 25-9-103, C.R.S. Statutory seats include a certified water or domestic wastewater treatment operator holding the highest level of certification available in Colorado; a certified water distribution or wastewater collection operator at the highest level available; an industrial wastewater representative; a city, special district, or utility manager; a representative of rural water or wastewater facilities; a CDPHE representative who serves ex officio and non-voting ; and four at-large members appointed for geographic balance (at least one residing west of the Continental Divide and at least one in the rural eastern plains). At least four voting members must be certified operators, and members serve four-year terms . Article 9 is scheduled for sunset review and is repealed effective September 1, 2031 unless continued. The Board is the policy-making and adjudicatory entity: it promulgates Regulation 100, sets facility classification criteria, hears disciplinary matters, and approves certification for operators certified elsewhere.
The Division (CDPHE - WQCD): The Water Quality Control Division (WQCD) of the Colorado Department of Public Health and Environment (CDPHE) acts as the technical, investigative, and operational staff for the Board. The Division conducts sanitary surveys, routine compliance inspections, environmental sampling audits, and incident investigations following water quality violations, process bypasses, or chemical spills.
Colorado Certified Water Professionals (CCWP): The administrative brand and portal program through which operator certification, portal profile tracking, exam eligibility review, license renewals, and training unit (TU) documentation are coordinated.
Entity / Program Legal Nature Primary Statutory Responsibilities
WWFOCB (The Board) Governor-appointed regulatory board Promulgates Regulation 100; establishes minimum qualifications; revokes/suspends licenses; hears appeals.
CDPHE - WQCD (The Division) Executive state environmental agency Performs field inspections; evaluates sanitary surveys; monitors discharge permits (CDPS) and drinking water compliance (Regulation 11); investigates misconduct.
CCWP Program Administrative certification portal Manages candidate applications; tracks continuing education / Training Units (TUs); verifies exam prerequisites.
WPI (Water Professionals International) National psychometric testing partner Develops and maintains standardized computerized examinations (formerly ABC); delivers validated exam score reports.
Examination Integration: The WPI Framework
Colorado has integrated its operator testing program with Water Professionals International (WPI) , formerly known as the Association of Boards of Certification (ABC). Standardizing examinations through WPI ensures that Colorado's certification credentials align with national psychometric standards, rigorous job-task analyses, and broad reciprocity agreements across North America.
Examination Administration & Scoring Standards
Question Format & Count: Standardized WPI examinations administered for Colorado certification consist of 100 scored multiple-choice questions . Standard exams may also embed up to 10 additional unscored "pre-test" questions utilized by psychometricians to validate future examination banks without affecting candidate scores.
Passing Score: Candidates must achieve a minimum scaled score of 70% (a raw minimum of 70 correct answers out of the 100 scored questions) to pass.
Test Delivery: Regulation 100 section 100.15.1(b) requires that all examinations be administered electronically unless other arrangements are made with the exam administrator. Colorado's exam administrator is PSI . After CDPHE's contractor approves your application in the CCWP Portal, you schedule directly with PSI — either at a PSI test center or by remote proctoring if your computer, browser, and internet connection meet PSI's requirements. Testing is continuous and year-round; there are no fixed testing windows.
Fees: Regulation 100 section 100.17 sets a $50 application and administration fee for certification by examination (paid in the CCWP Portal) and a $104 exam fee paid to PSI when you schedule. Certification for operators holding valid certificates from other certifying entities costs $150 , and renewal costs $85 . All application and administration fees are non-refundable.
Retesting: Under section 100.15.1(e), an applicant who fails may retest within the 100-day eligibility period without paying another application and administration fee, although a new exam fee applies for each attempt.
Examination Time Allowance: Candidates are allotted exactly 3 hours (180 minutes) to complete the 100-question examination.
Formula Sheets: Standardized WPI Formula/Conversion tables are provided electronically inside the testing interface. Candidates are not permitted to bring personal conversion charts or formulas into the secure testing room.
Operator Accountability, Ethics & Legal Liability
Under § 25-9-110 C.R.S. and Regulation 100, certified operators are held to a rigorous legal standard of care. Certified operators occupy positions of public trust where operational negligence, falsification, or failure to follow state-mandated monitoring schedules can cause acute waterborne illness outbreaks or severe aquatic life toxicity. +-------------------------------------------------------------------------+
- | GROUNDS FOR DISCIPLINARY SANCTION |
- | (§ 25-9-110 C.R.S.) |
- +-------------------------------------------------------------------------+
- | 1. Fraud, misrepresentation, or deceit in obtaining a certificate. |
- | 2. Gross negligence or willful misconduct in facility operation. |
- | 3. Falsification of operational logs, laboratory data, or MORs. |
- | 4. Willful violation of Regulation 100, Regulation 11, or CDPS permits. |
- | 5. Failure to exercise reasonable care, judgment, or supervision. |
- +-------------------------------------------------------------------------+
- Disciplinary Sanctions
When the Division investigates and confirms an operational violation or ethical breach, the Board possesses statutory authority to impose progressive disciplinary measures:
Reprimand (100.13.4): An official written admonition stating the facts, the statutory and regulatory provisions at issue, and a warning of more serious consequences for future wrongdoing.
Suspension (100.13.5): The Board may suspend a certificate for a period not to exceed three (3) years . At the end of the suspension the operator may resume prior duties without filing a new certification application . If the certificate comes up for renewal during a suspension, the operator must still renew on time; a certificate renewed during suspension becomes valid for three years starting on the ending date of the suspension.
Revocation (100.13.6): Following revocation, the operator may not apply for another certificate in the same classification category for three (3) years , and is then treated as a new applicant who must meet all initial requirements, including passing the certification examination again.
Emergency Suspension or Revocation (100.13.7): The Division may suspend or revoke a certificate immediately where such action is necessary to protect public health or the environment.
Prohibition on Representation (100.13.8): After suspension or revocation, the operator must not represent that they hold a certificate in that category, and no person may operate a facility on a suspended or revoked certificate.
Enforcement: Section 25-9-110, C.R.S. gives the Division authority to enforce compliance against operators and against facility owners who operate without required certified supervision.
Operational Scenario: Navigating Regulatory Inquiries
Consider an operational event at a 3.0 MGD surface water treatment plant. A coagulant feed pump develops a vapor lock at 02:00, causing rapid-mix chemical delivery to cease. Over the next four hours, settled water turbidity rises sharply, and combined filter effluent reaches 1.2 NTU, exceeding the 1.0 NTU acute health standard under Colorado Regulation 11.
A certified operator arriving at shift change discovers the uncorrected process failure. Under Regulation 100 and Regulation 11, the operator must immediately execute standard operating procedures (SOPs): engage standby chemical feed pumps, notify the designated Operator in Responsible Charge (ORC) , initiate filter backwashes or filter-to-waste sequencing, document the exact timeline and chemical dosages in the official physical/electronic logbook, and confirm that the ORC initiates mandatory 24-hour Tier 1 public and CDPHE notifications.
Attempting to alter SCADA trends, back-date chemical calibration logs, or conceal the exceedance constitutes criminal falsification under Colorado law. Full transparency and strict adherence to established SOPs protect both public health and the operator's professional license.