Study guide

1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance

Colorado Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: State Laws, Regulations & CCWP Certification

1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting

2 Chapter 2: Source Water & Drinking Water Treatment Processes

2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle

3 Chapter 3: Disinfection & Chemical Addition

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices

4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance

4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management

5 Chapter 5: Wastewater Treatment Principles & Biological Processes

5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects

6 Chapter 6: Advanced Wastewater Treatment & Solids Management

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84

7 Chapter 7: Water Distribution Systems

7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems

8 Chapter 8: Wastewater Collection Systems

8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment

9 Chapter 9: Pumps, Motors & Utility Mechanics

9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control

10 Chapter 10: Laboratory Analysis & Water Quality Monitoring

10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)

11 Chapter 11: Operator Mathematics & Applied Calculations

11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance

12 Chapter 12: Safety, Emergency Operations & Compliance

12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties

1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance

Key Takeaways Explain This Topic AI

CDPHE Regulation 11 (5 CCR 1002-11) establishes Colorado Primary Drinking Water Regulations under state primacy of the Safe Drinking Water Act (SDWA).

Public Water Systems (PWS) are classified into Community Water Systems (CWS), Non-Transient Non-Community Systems (NTNC), and Transient Non-Community Systems (TNC).

Regulation 11 establishes enforceable Maximum Contaminant Levels (MCLs), Maximum Residual Disinfectant Levels (MRDLs), and mandatory Treatment Techniques (TT).

Sanitary Surveys assess 8 core operational elements every 3 years for Community Water Systems; significant deficiencies mandate written response in 30 days and corrective action within 120 days.

Backflow prevention under Rule 11.39 requires a survey compliance ratio of 1.0, a backflow prevention annual compliance ratio of at least 0.90, and an annual program report to CDPHE by May 1.

Last updated: August 2026

Regulatory Primacy & System Classifications

The supply of potable water across Colorado is governed by CDPHE Regulation 11 (5 CCR 1002-11) , formally titled the Colorado Primary Drinking Water Regulations (CPDWR) . Under the federal Safe Drinking Water Act (SDWA) , the U.S. Environmental Protection Agency (EPA) granted the State of Colorado primacy (primary enforcement responsibility). Primacy authorizes the Water Quality Control Division (WQCD) to establish, monitor, and enforce drinking water standards that are at least as stringent as federal standards.

Public Water System (PWS) Definitions

A Public Water System (PWS) is defined under Regulation 11 as any system providing piped water for human consumption that has at least 15 service connections OR regularly serves an average of at least 25 individuals daily for at least 60 days per year . +-------------------------------------------------------------------------+

  • | PUBLIC WATER SYSTEM (PWS) CLASSIFICATIONS |
  • +-------------------------------------------------------------------------+
  • | 1. Community Water System (CWS): |
  • | Serves >= 15 service connections used by year-round residents OR |
  • | regularly serves >= 25 year-round residents (e.g., cities, towns, |
  • | mobile home parks, residential subdivisions). |
  • | |
  • | 2. Non-Transient Non-Community Water System (NTNCWS): |
  • | Regularly serves >= 25 of the SAME persons for >= 6 months per year |
  • | (e.g., schools, industrial work sites, business parks with wells). |
  • | |
  • | 3. Transient Non-Community Water System (TNCWS): |
  • | Serves >= 25 individuals daily for >= 60 days per year, but does NOT |
  • | serve the same people (e.g., highway rest areas, campgrounds, ski |
  • | resorts, rural gas stations). |
  • +-------------------------------------------------------------------------+
  • Contaminant Standards: MCLs, MRDLs & Treatment Techniques

Regulation 11 establishes health-based limits across several distinct regulatory categories:

Maximum Contaminant Level (MCL): The maximum permissible level of a contaminant delivered to any user of a public water system. MCLs are enforceable health standards.

Maximum Residual Disinfectant Level (MRDL): The maximum permissible concentration of a disinfectant residual (chlorine, chloramines, chlorine dioxide) allowed in the distribution network. The standard MRDL for free chlorine and total chlorine is 4.0 mg/L .

Minimum Residual Disinfectant Limits: A PWS must maintain a minimum free chlorine residual of 0.2 mg/L at the entry point to the distribution system and maintain a detectable disinfectant residual throughout all points in the distribution network.

Treatment Technique (TT): An enforceable procedure or performance standard required in place of an MCL when measuring a specific contaminant is technically or economically impractical (e.g., filtration turbidity performance, coagulant dosing for total organic carbon / TOC removal).

Contaminant Parameter Regulatory Standard Health Concern / Regulatory Mechanism

Nitrate ( N O 3 − NO_3^- N O 3 − ​ ) 10.0 mg/L (as N) Acute infant toxicity ( Methemoglobinemia or "blue baby syndrome"); Tier 1 notice if exceeded.

Nitrite ( N O 2 − NO_2^- N O 2 − ​ ) 1.0 mg/L (as N) Acute toxicity; rapidly oxidizes hemoglobin; monitored at distribution entry point.

Fluoride ( F − F^- F − ) 4.0 mg/L (Primary MCL) Dental and skeletal fluorosis (Secondary standard = 2.0 mg/L).

Arsenic ( A s As A s ) 0.010 mg/L (10 µg/L) Carcinogen; skin and vascular damage; chronic exposure limit.

Total Trihalomethanes (TTHM) 0.080 mg/L (80 µg/L) Disinfection byproduct from chlorine reacting with natural organics; Locational Running Annual Average (LRAA).

Haloacetic Acids (HAA5) 0.060 mg/L (60 µg/L) Carcinogenic disinfection byproduct; monitored under Stage 2 DBP Rule via LRAA.

Lead ( P b Pb P b ) Action Level 0.015 mg/L (15 µg/L) 90th percentile compliance threshold under Lead and Copper Rule (LCR/LCRR).

Copper ( C u Cu C u ) Action Level 1.3 mg/L (1,300 µg/L) 90th percentile compliance threshold; gastrointestinal distress and liver/kidney damage.

Surface Water Treatment Rule (SWTR) Turbidity Standards

For systems utilizing surface water or GWUDI sources with conventional or direct granular media filtration:

95% Compliance Standard: Filtered effluent turbidity must be ≤ \le ≤ 0.3 NTU in at least 95% of measurements taken each calendar month.

Absolute Maximum Limit: Filtered effluent turbidity must never exceed 1.0 NTU in any single sample. An exceedance of 1.0 NTU is an acute violation triggering immediate investigation and potential Tier 1 notification if uncorrected.

Log Removal / Inactivation Mandates: Treatment must achieve at least 3-log (99.9%) removal/inactivation of Giardia lamblia , 4-log (99.99%) removal/inactivation of viruses , and 2-log (99%) removal of Cryptosporidium .

Revised Total Coliform Rule (RTCR) Compliance

Microbiological safety is evaluated under the Revised Total Coliform Rule (RTCR) . Total coliform bacteria serve as operational indicators of treatment integrity and distribution sanitary barriers.

Routine Monitoring: Samples are collected across representative distribution points according to an approved written sample siting plan. The monthly sample volume scales with population (e.g., 25–1,000 population = 1 sample/month; 1,001–2,500 = 2 samples/month; 2,501–3,300 = 3 samples/month; major metro systems collect hundreds per month).

Positive Sample Protocol: If any routine sample tests Total Coliform positive (TC+) , the laboratory must immediately test that culture for Escherichia coli ( E. coli ) . Furthermore, the operator must collect a set of 3 repeat samples within 24 hours : (1) at the original tap, (2) within 5 service connections upstream, and (3) within 5 service connections downstream. In addition, groundwater systems must collect triggered source water samples under the Ground Water Rule.

Level 1 Assessment: Triggered if a system collecting < < < 40 samples/month has 2 or more TC+ samples in a month (or if a system collecting ≥ \ge ≥ 40 samples exceeds 5.0% TC+ ). The system conducts an internal operational investigation and submits the assessment form to CDPHE within 30 days .

Level 2 Assessment: An in-depth comprehensive inspection triggered by an acute E. coli MCL violation (e.g., E . c o l i + E. coli+ E . co l i + routine followed by T C + TC+ TC + repeat, or T C + TC+ TC + routine followed by E . c o l i + E. coli+ E . co l i + repeat) OR occurrence of a second Level 1 trigger within a rolling 12-month period. Conducted by a CDPHE-approved qualified party.

Sanitary Surveys & Finished Storage Tank Oversight +-------------------------------------------------------------------------+

  • | THE 8 SANITARY SURVEY CORE ELEMENTS |
  • +-------------------------------------------------------------------------+
  • | 1. Water Source (wells, intakes, watershed protection) |
  • | 2. Treatment Processes (coagulation, filtration, disinfection) |
  • | 3. Distribution System (piping, pressures, looping, flushing) |
  • | 4. Finished Water Storage (tanks, standpipes, vents, screens) |
  • | 5. Pumps, Pumping Facilities & Controls |
  • | 6. Monitoring, Reporting, Laboratory & Data Verification |
  • | 7. Water System Management, Staffing & Financial Operations |
  • | 8. Operator Compliance & ORC Certification Standards |
  • +-------------------------------------------------------------------------+

Sanitary Survey Frequency: Conducted by CDPHE every 3 years for Community Water Systems (can be extended to 5 years for systems with outstanding performance histories) and every 5 years for Non-Community systems.

Significant Deficiencies: Structural, operational, or mechanical defects that pose an immediate or potential pathway for contamination (e.g., cracked storage reservoir roof, missing 24-mesh vent screen, lack of backflow program). The system must submit a written response to CDPHE within 30 days and complete corrective actions (or enter an approved schedule) within 120 days .

Storage Tank Inspection Mandate: Regulation 11 requires periodic visual inspections (annually) and comprehensive sanitary/structural inspections (minimum every 5 years) of all finished water storage tanks, including verification of sealed access hatches, gaskets, overflow flapper valves, and 24-mesh corrosion-resistant screens.

  • Backflow Prevention (Rule 11.39) & Public Notice Tiers
  • Backflow Prevention and Cross-Connection Control (BPCCC)

Under Regulation 11.39 , public water suppliers must eliminate cross-connections and prevent backflow of pollutants or contaminants into the public distribution network through backsiphonage or backpressure. Suppliers must conduct hazard surveys on all commercial, industrial, and multi-family service connections.

Containment Assemblies: High-hazard connections require an Approved Air Gap (AG) or a Reduced Pressure Zone (RPZ) backflow preventer. Low-hazard connections may utilize a Double Check Valve Assembly (DCVA) .

Survey Compliance Ratio: Under Rule 11.39(2)(c)(iii) the supplier must survey all non-single-family-residential connections and maintain a survey compliance ratio of 1.0 each year , unless the Department approves an alternative ratio and schedule.

Backflow Prevention Annual Compliance Ratio: Rule 11.39(3)(d) requires assemblies to be tested annually by a Certified Cross-Connection Control Technician and methods to be inspected annually , and the supplier must achieve a backflow prevention annual compliance ratio of at least 0.90 . The ratio is the sum of methods inspected plus assemblies tested during the calendar year divided by the sum of methods and assemblies installed at a cross-connection that were used during that year.

Correction Deadlines: A discovered uncontrolled cross-connection, a failed assembly test, or an inadequate backflow method must be corrected, service suspended, or the cross-connection removed within 120 days (or an approved alternative schedule), and no assembly may go two consecutive calendar years without testing. A supplier ordered in writing by the Department must control or remove the cross-connection within 10 days .

Annual Report: The written BPCCC program report for the prior calendar year is due to CDPHE no later than May 1 . A suspected or confirmed backflow contamination event must be reported to the Department within 24 hours ; treatment technique violations require notice within 48 hours plus Tier 2 public notice.

Public Notification Tiers & MOR Deadlines

Tier 1 Notice (Immediate Public Health Threat): Acute violations including E. coli MCL exceedances, Nitrate/Nitrite violations, waterborne disease outbreaks, or SWTR turbidity exceeding 1.0 NTU where treatment is compromised. Mandatory public notice within 24 hours via broadcast media, door-to-door hand delivery, or electronic reverse-911.

Tier 2 Notice (MCL or Treatment Technique Violations): Non-acute chemical MCL exceedances (TTHM, HAA5, Fluoride) or failure to correct significant deficiencies. Public notice required within 30 days .

Tier 3 Notice (Monitoring & Testing Violations): Failure to take required monthly samples or submit reports. Notice required within 12 months (frequently distributed via the annual Consumer Confidence Report / CCR).

Monthly Operating Reports (MORs): All operational logs, disinfectant residual tracking, and daily turbidity logs must be submitted to CDPHE by the 10th day of the month following the reporting period.

Loading diagram... Regulation 11 Drinking Water Compliance & Response Architecture