Study guide

3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide

Colorado Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: State Laws, Regulations & CCWP Certification

1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting

2 Chapter 2: Source Water & Drinking Water Treatment Processes

2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle

3 Chapter 3: Disinfection & Chemical Addition

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices

4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance

4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management

5 Chapter 5: Wastewater Treatment Principles & Biological Processes

5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects

6 Chapter 6: Advanced Wastewater Treatment & Solids Management

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84

7 Chapter 7: Water Distribution Systems

7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems

8 Chapter 8: Wastewater Collection Systems

8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment

9 Chapter 9: Pumps, Motors & Utility Mechanics

9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control

10 Chapter 10: Laboratory Analysis & Water Quality Monitoring

10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)

11 Chapter 11: Operator Mathematics & Applied Calculations

11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance

12 Chapter 12: Safety, Emergency Operations & Compliance

12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties

3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide

Key Takeaways Explain This Topic AI

Chloramination uses monochloramine formed at a 4.5:1 to 5:1 Cl2:NH3-N weight ratio to provide a stable, long-lasting secondary residual with minimal DBP formation.

Nitrification in chloraminated systems occurs when free ammonia allows ammonia-oxidizing bacteria to produce nitrite, rapidly destroying disinfectant residuals.

Ultraviolet (UV) light damages microbial DNA/RNA at 254 nm and is exceptionally potent against Cryptosporidium and Giardia at low doses (4–12 mJ/cm²).

UV disinfection provides no chemical residual in the water, necessitating the addition of a secondary disinfectant before distribution.

Chlorine dioxide (ClO2) is a selective, high-potency dissolved gas oxidant that does not form halogenated DBPs but is regulated by chlorite byproduct limits (MCL 1.0 mg/L).

Last updated: August 2026

Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide

To balance strict microbial pathogen inactivation with rigorous Disinfection Byproduct (DBP) regulations, water utilities frequently implement alternative disinfection technologies. The three most common alternatives are chloramination , ultraviolet (UV) irradiation , and chlorine dioxide .

1. Chloramination (Secondary Disinfection)

Chloramination is the intentional formation of monochloramine ( NH 2 Cl \text{NH}_2\text{Cl} NH 2 ​ Cl ) by combining chlorine with ammonia. It is widely utilized as a secondary disinfectant in extensive distribution networks.

Advantages and Limitations

Advantages: Produces virtually no trihalomethanes (TTHMs) or haloacetic acids (HAA5s); maintains an exceptionally persistent, durable residual across high-water-age networks; penetrates microbial biofilms more effectively than free chlorine.

Limitations: Weak oxidant for primary disinfection (requires massive CT values for Giardia and virus inactivation); toxic to kidney dialysis patients and aquatic life in aquariums; prone to biological nitrification in storage reservoirs.

Stoichiometric Feed Control: The 5:1 Cl₂:NH₃-N Ratio

To produce monochloramine while preventing nuisance species, utilities feed chlorine and ammonia at an exact weight ratio of 4.5:1 to 5:0 Cl₂ to NH₃-N (ammonia measured as nitrogen): Cl2 : NH3-N Ratio < 4.0:1 --> Excess Unreacted Free Ammonia (Triggers Nitrification)

  • Cl2 : NH3-N Ratio = 4.5:1 - 5.0:1 --> Optimal Monochloramine Formation (Target Zone)
  • Cl2 : NH3-N Ratio > 5.5:1 --> Dichloramine Formation (Pungent Taste & Odor Complaints)
  • Cl2 : NH3-N Ratio >= 7.6:1 --> Breakpoint Chlorination (Oxidation of Chloramines)
  • Nitrification in Distribution Systems

When unreacted free ammonia is present in warm, low-flow distribution pipes or stratified storage tanks, naturally occurring ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) initiate a two-step biological oxidation process:

Ammonia to Nitrite (AOB): 2 NH 3 + 3 O 2 → AOB 2 NO 2 − (Nitrite) + 2 H + + 2 H 2 O 2\text{NH}_3 + 3\text{O}_2 \xrightarrow{\text{AOB}} 2\text{NO}_2^- \text{ (Nitrite)} + 2\text{H}^+ + 2\text{H}_2\text{O} 2 NH 3 ​ + 3 O 2 ​ AOB ​ 2 NO 2 − ​ (Nitrite) + 2 H + + 2 H 2 ​ O

Nitrite to Nitrate (NOB): 2 NO 2 − + O 2 → NOB 2 NO 3 − (Nitrate) 2\text{NO}_2^- + \text{O}_2 \xrightarrow{\text{NOB}} 2\text{NO}_3^- \text{ (Nitrate)} 2 NO 2 − ​ + O 2 ​ NOB ​ 2 NO 3 − ​ (Nitrate)

Operational Warning Signs of Nitrification:

Sharp drop in total chlorine residual.

Increase in nitrite ( NO 2 − \text{NO}_2^- NO 2 − ​ ) levels above 0.05 mg/L .

Increase in free ammonia concentration.

Decrease in pH and alkalinity.

Increase in Heterotrophic Plate Counts (HPC).

Nitrification Control Tactics:

Adjust chlorine-to-ammonia ratio back to 5:1 to eliminate excess free ammonia.

Deep-cycle storage tanks to reduce water age (< 5–7 days).

Conduct aggressive unidirectional main flushing.

Implement a temporary "Free Chlorine Burn" (suspending ammonia feed and maintaining a free chlorine residual for 2 to 4 weeks to kill nitrifying biofilm).

Loading diagram... Comparison of Alternative Disinfection Mechanisms and Operational Constraints

2. Ultraviolet (UV) Light Disinfection

Ultraviolet disinfection utilizes electromagnetic radiation in the germicidal C-band (UV-C), specifically wavelengths between 200 and 300 nm , with peak germicidal efficiency occurring at 254 nm .

Mechanism of Pathogen Inactivation

Unlike chemical oxidants that rupture cell walls or denature proteins, UV light penetrates the microbial cell wall and is absorbed by the nucleic acids (DNA and RNA). The photon energy causes adjacent thymine bases (in DNA) or uracil bases (in RNA) to form covalent double bonds ( thymine dimers ). This cross-linking prevents the organism from unzipping its DNA for replication and transcription, rendering the pathogen non-infectious and harmless without chemical lysis.

Exceptional Protozoan Efficacy

Chlorine is notoriously ineffective against Cryptosporidium oocysts (requiring a prohibitive CT of > 7,000 mg·min/L). In stark contrast, UV achieves high-level protozoan inactivation at very low doses:

Pathogen UV Dose for 1.0-log (90%) Inactivation UV Dose for 2.0-log (99%) Inactivation UV Dose for 3.0-log (99.9%) Inactivation

  • Cryptosporidium oocysts 2.5 mJ/cm² 5.8 mJ/cm² 12.0 mJ/cm²
  • Giardia lamblia cysts 2.1 mJ/cm² 5.2 mJ/cm² 11.0 mJ/cm²
  • Enteric Viruses (Rotavirus/Polio) 15–25 mJ/cm² 30–50 mJ/cm² 60–90 mJ/cm²
  • Adenovirus 58 mJ/cm² 100 mJ/cm² 186 mJ/cm² (4.0-log)

Note: Because Adenovirus is highly UV-resistant, EPA mandates a high UV dose of 186 mJ/cm² if UV is credited for 4-log virus inactivation, or utilities combine UV with a chemical disinfectant (free chlorine) to satisfy virus credits.

Fundamental UV Operating Parameters

UV Dose (Fluence): Expressed in millijoules per square centimeter ( mJ/cm 2 \text{mJ/cm}^2 mJ/cm 2 ) or milliwatt-seconds per square centimeter ( mWs/cm 2 \text{mWs/cm}^2 mWs/cm 2 ): UV Dose ( mJ/cm 2 ) = UV Intensity ( mW/cm 2 ) × Exposure Time (seconds) \text{UV Dose } (\text{mJ/cm}^2) = \text{UV Intensity } (\text{mW/cm}^2) \times \text{Exposure Time (seconds)} UV Dose ( mJ/cm 2 ) = UV Intensity ( mW/cm 2 ) × Exposure Time (seconds)

UV Transmittance (% UVT): The percentage of 254 nm light that penetrates a 1-cm path of water. High UVT (> 90–95%) ensures deep light penetration; low UVT (< 80%) caused by iron, manganese, humic color, or suspended solids severely limits disinfection.

Lamp Types:

Low-Pressure Low-Intensity (LPLI) / Low-Pressure High-Output (LPHO): Monochromatic output at exactly 253.7 nm; high electrical efficiency; ideal for small-to-medium systems.

Medium-Pressure High-Output (MPHO): Polychromatic broad-spectrum output (200–300 nm); intense light output in a compact footprint; higher power draw.

Quartz Sleeve Maintenance: Hardness scale and iron foul the protective quartz sleeves housing the UV lamps. Automated mechanical wipers utilizing citric acid or dilute phosphoric acid clean sleeves periodically without taking reactors offline.

No Residual: UV provides zero chemical residual in treated water. Utilities must feed chlorine or chloramines downstream of UV reactors before water enters the distribution network.

3. Chlorine Dioxide ( ClO 2 \text{ClO}_2 ClO 2 ​ )

Chlorine dioxide is a neutral, synthetic gas that exists in water as a true dissolved gas without hydrolyzing into acids.

Generation Chemistry

Because chlorine dioxide gas is unstable and explosive under pressure, it cannot be compressed or shipped in cylinders; it must be generated on-site immediately prior to injection. The most common municipal generation method reacts liquid sodium chlorite ( NaClO 2 \text{NaClO}_2 NaClO 2 ​ ) with chlorine gas ( Cl 2 \text{Cl}_2 Cl 2 ​ ): 2 NaClO 2 + Cl 2 ⟶ 2 ClO 2 ↑ + 2 NaCl 2\text{NaClO}_2 + \text{Cl}_2 \longrightarrow 2\text{ClO}_2\uparrow + 2\text{NaCl} 2 NaClO 2 ​ + Cl 2 ​ ⟶ 2 ClO 2 ​ ↑ + 2 NaCl

Alternative generators utilize sodium chlorite and hydrochloric acid ( HCl \text{HCl} HCl ) or sodium chlorate electrochemical systems.

Disinfection & Oxidation Characteristics

Broad Oxidation Utility: Rapidly oxidizes soluble iron ( Fe 2 + \text{Fe}^{2+} Fe 2 + ) and manganese ( Mn 2 + \text{Mn}^{2+} Mn 2 + ), destroys phenolic taste/odor compounds, and degrades geosmin and MIB.

pH Independence: Unlike chlorine, ClO 2 \text{ClO}_2 ClO 2 ​ disinfection potency is stable and effective across a broad pH range of 4.0 to 10.0 .

No Halogenated DBPs: Chlorine dioxide does not react with humic substances to form TTHMs or HAA5s.

Regulatory Constraints & Byproduct Limits

Maximum Residual Disinfectant Level (MRDL): 0.8 mg/L \mathbf{0.8\text{ mg/L}} 0.8 mg/L for ClO 2 \text{ClO}_2 ClO 2 ​ .

Chlorite ( ClO 2 − \text{ClO}_2^- ClO 2 − ​ ) MCL: 1.0 mg/L \mathbf{1.0\text{ mg/L}} 1.0 mg/L . Chlorine dioxide reduces to chlorite ion in water. Utilities must monitor daily for chlorite at the entry point and collect monthly 3-sample distribution sets (near first customer, average residence, and max residence time).