Study guide

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination

Colorado Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: State Laws, Regulations & CCWP Certification

1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting

2 Chapter 2: Source Water & Drinking Water Treatment Processes

2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle

3 Chapter 3: Disinfection & Chemical Addition

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices

4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance

4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management

5 Chapter 5: Wastewater Treatment Principles & Biological Processes

5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects

6 Chapter 6: Advanced Wastewater Treatment & Solids Management

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84

7 Chapter 7: Water Distribution Systems

7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems

8 Chapter 8: Wastewater Collection Systems

8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment

9 Chapter 9: Pumps, Motors & Utility Mechanics

9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control

10 Chapter 10: Laboratory Analysis & Water Quality Monitoring

10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)

11 Chapter 11: Operator Mathematics & Applied Calculations

11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance

12 Chapter 12: Safety, Emergency Operations & Compliance

12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination

Key Takeaways Explain This Topic AI

Chlorine gas hydrolyzes in water to form hypochlorous acid (HOCl) and hydrochloric acid (HCl); HOCl dissociates into hypochlorite ion (OCl-) based strictly on pH.

Hypochlorous acid (HOCl) is 80 to 100 times more effective as a germicidal disinfectant than hypochlorite ion (OCl-) due to its neutral electrical charge.

Free available chlorine consists of uncombined HOCl and OCl-, whereas combined available chlorine consists of chloramines formed by reactions with ammonia.

Breakpoint chlorination occurs when sufficient chlorine is added to satisfy initial reducing demand and oxidize all chloramines, establishing a persistent free residual.

The fundamental mass-balance relationship for all disinfection operations is: Chlorine Dose = Chlorine Demand + Chlorine Residual.

Last updated: August 2026

Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination

Disinfection is the selective destruction or inactivation of pathogenic microorganisms to prevent the transmission of waterborne disease. In drinking water and wastewater treatment across Colorado, chlorine remains the predominant chemical disinfectant due to its high oxidation potential, proven germicidal efficacy, and ability to maintain a protective residual throughout distribution networks.

1. Aqueous Chlorine Reactions

When chlorine is introduced to water, several distinct chemical reactions occur depending on the specific chemical form applied—gaseous elemental chlorine ( Cl 2 \text{Cl}_2 Cl 2 ​ ), liquid sodium hypochlorite ( NaOCl \text{NaOCl} NaOCl ), or solid calcium hypochlorite ( Ca(OCl) 2 \text{Ca(OCl)}_2 Ca(OCl) 2 ​ ).

Gas Chlorine Hydrolysis

Elemental chlorine gas hydrolyzes virtually instantaneously (within tenths of a second) when dissolved in water according to the following reversible reaction: Cl 2 + H 2 O ⇌ HOCl + H + + Cl − \text{Cl}_2 + \text{H}_2\text{O} \rightleftharpoons \text{HOCl} + \text{H}^+ + \text{Cl}^- Cl 2 ​ + H 2 ​ O ⇌ HOCl + H + + Cl −

This reaction produces hypochlorous acid ( HOCl \text{HOCl} HOCl ) and hydrochloric acid ( HCl \text{HCl} HCl ). Because hydrochloric acid is a strong acid that fully dissociates, feeding chlorine gas consumes natural alkalinity and lowers finished water pH. Every pound of chlorine gas added theoretically consumes approximately 1.13 to 1.4 pounds of alkalinity as calcium carbonate ( CaCO 3 \text{CaCO}_3 CaCO 3 ​ ).

Hypochlorite Salt Hydrolysis

Hypochlorite salts also generate hypochlorous acid upon contact with water, but their reaction dynamics affect pH differently:

Sodium Hypochlorite (Liquid Bleach, 12.5%): NaOCl + H 2 O ⇌ HOCl + Na + + OH − \text{NaOCl} + \text{H}_2\text{O} \rightleftharpoons \text{HOCl} + \text{Na}^+ + \text{OH}^- NaOCl + H 2 ​ O ⇌ HOCl + Na + + OH −

Calcium Hypochlorite (High-Test Hypochlorite / HTH, 65%): Ca(OCl) 2 + 2 H 2 O ⇌ 2 HOCl + Ca 2 + + 2 OH − \text{Ca(OCl)}_2 + 2\text{H}_2\text{O} \rightleftharpoons 2\text{HOCl} + \text{Ca}^{2+} + 2\text{OH}^- Ca(OCl) 2 ​ + 2 H 2 ​ O ⇌ 2 HOCl + Ca 2 + + 2 OH −

Both hypochlorite salts produce hydroxide ions ( OH − \text{OH}^- OH − ), which raises the solution pH. Consequently, treating acidic or poorly buffered waters with hypochlorites can cause the process pH to rise, requiring pH adjustment to ensure optimal disinfection kinetics.

2. Hypochlorous Acid Dissociation and pH Dependence

Hypochlorous acid ( HOCl \text{HOCl} HOCl ) is a weak acid that partially dissociates in aqueous solution to yield a hydrogen ion ( H + \text{H}^+ H + ) and a hypochlorite ion ( OCl − \text{OCl}^- OCl − ): HOCl ⇌ H + + OCl − \text{HOCl} \rightleftharpoons \text{H}^+ + \text{OCl}^- HOCl ⇌ H + + OCl −

The relative distribution of HOCl \text{HOCl} HOCl versus OCl − \text{OCl}^- OCl − is strictly governed by water pH and water temperature. The dissociation constant ( p K a pK_a p K a ​ ) for hypochlorous acid is approximately 7.54 at 20°C (and 7.60 at 15°C ). pH 6.0: [========================================] 96.5% HOCl | [=] 3.5% OCl-

  • pH 7.0: [=============================] 77.5% HOCl | [========] 22.5% OCl-
  • pH 7.5: [====================] 50.0% HOCl | [====================] 50.0% OCl-
  • pH 8.0: [========] 21.5% HOCl | [=============================] 78.5% OCl-
  • pH 8.5: [===] 8.7% HOCl | [==================================] 91.3% OCl-
  • pH 9.0: [=] 2.7% HOCl | [======================================] 97.3% OCl-
  • Water pH (at 20°C) Hypochlorous Acid (% HOCl) Hypochlorite Ion (% OCl⁻) Relative Germicidal Potency
  • 6.0 96.5% 3.5% Extremely High
  • 6.5 91.0% 9.0% Very High
  • 7.0 77.5% 22.5% High
  • 7.5 50.0% 50.0% Moderate
  • 8.0 21.5% 78.5% Low
  • 8.5 8.7% 91.3% Very Low
  • 9.0 2.7% 97.3% Minimal
  • Why HOCl is 80 to 100 Times More Potent Than OCl⁻

Bacterial cell membranes carry a net negative surface charge. Because hypochlorous acid ( HOCl \text{HOCl} HOCl ) is an electrically neutral molecule , it effortlessly diffuses through the hydrophobic lipid bilayer of microbial cell walls. Once inside the cell, HOCl \text{HOCl} HOCl oxidizes essential intracellular sulfhydryl-containing enzymes, disrupting glucose metabolism and cellular respiration. In contrast, the hypochlorite ion ( OCl − \text{OCl}^- OCl − ) carries a negative electrical charge and is electrostatically repelled by the microbial membrane, rendering it 80 to 100 times less effective as a germicidal agent than HOCl \text{HOCl} HOCl .

Loading diagram... Chlorine Speciation & Germicidal Potency vs. Solution pH

3. Chlorine Reactions with Ammonia: Chloramines

When water contains dissolved ammonia nitrogen ( NH 3 -N \text{NH}_3\text{-N} NH 3 ​ -N ), hypochlorous acid reacts in sequential substitution steps to form inorganic chloramines , which constitute combined available chlorine residual .

Monochloramine Formation

At neutral to slightly alkaline pH (7.0 to 8.5) and a weight ratio of chlorine to ammonia nitrogen of up to 5:1 , hypochlorous acid reacts rapidly with ammonia to form monochloramine: NH 3 + HOCl ⟶ NH 2 Cl (Monochloramine) + H 2 O \text{NH}_3 + \text{HOCl} \longrightarrow \text{NH}_2\text{Cl} \text{ (Monochloramine)} + \text{H}_2\text{O} NH 3 ​ + HOCl ⟶ NH 2 ​ Cl (Monochloramine) + H 2 ​ O

Monochloramine is a stable, mild disinfectant that does not produce objectionable chlorinous tastes or odors when maintained within proper operational parameters.

Dichloramine Formation

As the chlorine-to-ammonia weight ratio increases above 5:1 (up to ~7.6:1), or under lower pH conditions (pH 4.5 to 6.0), monochloramine reacts with additional hypochlorous acid to form dichloramine: NH 2 Cl + HOCl ⟶ NHCl 2 (Dichloramine) + H 2 O \text{NH}_2\text{Cl} + \text{HOCl} \longrightarrow \text{NHCl}_2 \text{ (Dichloramine)} + \text{H}_2\text{O} NH 2 ​ Cl + HOCl ⟶ NHCl 2 ​ (Dichloramine) + H 2 ​ O

Dichloramine produces strong, pungent, "swimming pool" odors and causes eye irritation. Operators actively avoid dichloramine formation in treated drinking water.

Trichloramine (Nitrogen Trichloride) Formation

At very high chlorine-to-ammonia weight ratios (> 7.6:1) or highly acidic conditions (pH < 4.4), dichloramine reacts further to produce trichloramine: NHCl 2 + HOCl ⟶ NCl 3 (Trichloramine) + H 2 O \text{NHCl}_2 + \text{HOCl} \longrightarrow \text{NCl}_3 \text{ (Trichloramine)} + \text{H}_2\text{O} NHCl 2 ​ + HOCl ⟶ NCl 3 ​ (Trichloramine) + H 2 ​ O

Trichloramine is an exceptionally noxious, volatile gas that causes severe lacrimation (tearing), respiratory irritation, and taste complaints even at concentrations below 0.05 mg/L.

4. The Breakpoint Chlorination Curve

Breakpoint chlorination is the operational process of adding sufficient chlorine to water to completely satisfy initial inorganic demand, oxidize all ammonia and chloramine complexes, and achieve an uncombined, free available chlorine residual. Chlorine Residual (mg/L)

  • ^
  • | / (Zone 4: Free Residual)
  • | / (1:1 slope)
  • | Peak (Zone 2) /
  • | /\ /
  • | / \ /
  • | / \ (Zone 3) /
  • | / \ /
  • | (Zone 1) / \ /
  • | __________ / \_______________/
  • | / \/ Breakpoint (Trough)
  • +--------------------------------------------------------> Chlorine Dose (mg/L)
  • Reducing Combined Chloramine Free Available
  • Demand Formation Oxidation Residual
  • The Four Distinct Breakpoint Zones

Zone 1: Inorganic Demand / Immediate Destruction Chlorine reacts immediately with readily oxidizable inorganic reducing compounds, including ferrous iron ( Fe 2 + \text{Fe}^{2+} Fe 2 + ), manganous manganese ( Mn 2 + \text{Mn}^{2+} Mn 2 + ), hydrogen sulfide ( H 2 S \text{H}_2\text{S} H 2 ​ S ), and nitrite ( NO 2 − \text{NO}_2^- NO 2 − ​ ). These reactions consume chlorine completely; measured chlorine residual is zero .

Zone 2: Combined Residual Formation (Formation of Chloramines) Chlorine reacts with dissolved ammonia and organic nitrogen compounds. As the chlorine dose increases up to a weight ratio of approximately 5:1 Cl 2 : NH 3 -N \text{Cl}_2:\text{NH}_3\text{-N} Cl 2 ​ : NH 3 ​ -N , monochloramine and organochloramines form. The measured total chlorine residual rises steadily to a local maximum ( the Peak ). All measured residual is combined chlorine.

Zone 3: Oxidation and Destruction of Chloramines As additional chlorine is added beyond the 5:1 ratio, hypochlorous acid oxidizes the chloramines into nitrogen gas ( N 2 \text{N}_2 N 2 ​ ), nitrous oxide ( N 2 O \text{N}_2\text{O} N 2 ​ O ), and hydrochloric acid ( HCl \text{HCl} HCl ): 2 NH 2 Cl + HOCl ⟶ N 2 ↑ + 3 HCl + H 2 O 2\text{NH}_2\text{Cl} + \text{HOCl} \longrightarrow \text{N}_2\uparrow + 3\text{HCl} + \text{H}_2\text{O} 2 NH 2 ​ Cl + HOCl ⟶ N 2 ​ ↑ + 3 HCl + H 2 ​ O

This destruction consumes both the added chlorine and the previously formed chloramines, causing the measured total residual curve to drop sharply until reaching the Breakpoint Trough (typically at a weight ratio of 7.6:1 to 10:1 Cl 2 : NH 3 -N \text{Cl}_2:\text{NH}_3\text{-N} Cl 2 ​ : NH 3 ​ -N ). This zone is notorious for taste and odor complaints due to transient dichloramine and trichloramine intermediates.

Zone 4: Free Available Chlorine Residual Beyond the breakpoint trough, all ammonia and reducing agents have been fully oxidized. Any additional chlorine added exists purely as free available chlorine ( HOCl \text{HOCl} HOCl and OCl − \text{OCl}^- OCl − ). The residual line rises in a direct 1:1 linear slope with applied dosage.

5. Dosage, Demand, and Residual Calculations

The relationship between chlorine application and measurement is defined by the core mass-balance equation: Chlorine Dose (mg/L) = Chlorine Demand (mg/L) + Chlorine Residual (mg/L) \text{Chlorine Dose (mg/L)} = \text{Chlorine Demand (mg/L)} + \text{Chlorine Residual (mg/L)} Chlorine Dose (mg/L) = Chlorine Demand (mg/L) + Chlorine Residual (mg/L) Total Chlorine Residual = Free Available Residual + Combined Available Residual \text{Total Chlorine Residual} = \text{Free Available Residual} + \text{Combined Available Residual} Total Chlorine Residual = Free Available Residual + Combined Available Residual

Analytical Differentiation: The DPD Colorimetric Method

Operators utilize the N,N-diethyl-p-phenylenediamine ( DPD ) colorimetric method to quantify chlorine fractions:

DPD-1 Reagent: Reacts instantly with Free Available Chlorine ( HOCl + OCl − \text{HOCl} + \text{OCl}^- HOCl + OCl − ) to produce a red/magenta color.

DPD-3 Reagent (or Potassium Iodide): Added after DPD-1 to catalyze the reaction of chloramines, yielding the Total Chlorine Residual .

Combined Chlorine: Calculated mathematically as Combined Residual = Total Residual − Free Residual \text{Combined Residual} = \text{Total Residual} - \text{Free Residual} Combined Residual = Total Residual − Free Residual .

Worked Example 3.1.1: Determining Breakpoint Chlorine Feed Rate

A water treatment plant treats 3.50 MGD with an ammonia nitrogen concentration of 0.25 mg/L NH 3 -N \text{NH}_3\text{-N} NH 3 ​ -N and an inorganic reducing demand of 0.80 mg/L . The target finished water free chlorine residual entering the clearwell is 1.60 mg/L . To ensure complete breakpoint chlorination, an operational ratio of 10:1 Cl 2 : NH 3 -N \text{Cl}_2:\text{NH}_3\text{-N} Cl 2 ​ : NH 3 ​ -N is required.

Step 1: Calculate the chlorine required for ammonia oxidation: Chlorine for Ammonia = 0.25 mg/L NH 3 -N × 10 = 2.50 mg/L Cl 2 \text{Chlorine for Ammonia} = 0.25\text{ mg/L } \text{NH}_3\text{-N} \times 10 = 2.50\text{ mg/L } \text{Cl}_2 Chlorine for Ammonia = 0.25 mg/L NH 3 ​ -N × 10 = 2.50 mg/L Cl 2 ​

Step 2: Calculate total chlorine dosage required: Total Dose = Inorganic Demand + Ammonia Demand + Desired Free Residual \text{Total Dose} = \text{Inorganic Demand} + \text{Ammonia Demand} + \text{Desired Free Residual} Total Dose = Inorganic Demand + Ammonia Demand + Desired Free Residual Total Dose = 0.80 mg/L + 2.50 mg/L + 1.60 mg/L = 4.90 mg/L \text{Total Dose} = 0.80\text{ mg/L} + 2.50\text{ mg/L} + 1.60\text{ mg/L} = 4.90\text{ mg/L} Total Dose = 0.80 mg/L + 2.50 mg/L + 1.60 mg/L = 4.90 mg/L

Step 3: Calculate daily chemical feed rate using the standard Pounds Formula: Feed Rate (lb/day) = Flow (MGD) × Dose (mg/L) × 8.34 lb/gal \text{Feed Rate (lb/day)} = \text{Flow (MGD)} \times \text{Dose (mg/L)} \times 8.34\text{ lb/gal} Feed Rate (lb/day) = Flow (MGD) × Dose (mg/L) × 8.34 lb/gal Feed Rate = 3.50 MGD × 4.90 mg/L × 8.34 lb/gal = 143.04 lb/day of 100% pure Cl 2 \text{Feed Rate} = 3.50\text{ MGD} \times 4.90\text{ mg/L} \times 8.34\text{ lb/gal} = 143.04\text{ lb/day of 100\% pure } \text{Cl}_2 Feed Rate = 3.50 MGD × 4.90 mg/L × 8.34 lb/gal = 143.04 lb/day of 100% pure Cl 2 ​