Study guide
3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules
Key Takeaways Explain This Topic AI
Disinfection byproducts (DBPs) form when free chlorine reacts with Natural Organic Matter (NOM), measured as Total Organic Carbon (TOC).
Total Trihalomethanes (TTHMs) have a Maximum Contaminant Level (MCL) of 0.080 mg/L (80 µg/L); the five regulated Haloacetic Acids (HAA5) have an MCL of 0.060 mg/L (60 µg/L).
The Stage 2 DBP Rule evaluates compliance using a Locational Running Annual Average (LRAA) at each individual monitoring site rather than a system-wide average.
Enhanced coagulation is required under Step 1 TOC removal matrices to remove organic DBP precursors before chlorine addition.
Operational strategies to mitigate DBPs include reducing distribution water age, relocating chlorination injection points downstream of clarification, and optimizing storage tank turnover.
Last updated: August 2026
Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules
While chemical disinfection has virtually eradicated cholera, typhoid, and other lethal waterborne epidemics in the United States, adding chemical oxidants to raw water introduces a secondary public health challenge: the formation of Disinfection Byproducts (DBPs) .
1. DBP Formation Chemistry & Precursors
Disinfection byproducts are formed when strong chemical oxidants—primarily free chlorine ( HOCl + OCl − \text{HOCl} + \text{OCl}^- HOCl + OCl − )—react over time with naturally occurring organic and inorganic matter in raw water. Free Chlorine ( HOCl ) + Natural Organic Matter (NOM/TOC) + Bromide ( Br − ) ⟶ Halogenated DBPs \text{Free Chlorine } (\text{HOCl}) + \text{Natural Organic Matter (NOM/TOC)} + \text{Bromide } (\text{Br}^-) \longrightarrow \text{Halogenated DBPs} Free Chlorine ( HOCl ) + Natural Organic Matter (NOM/TOC) + Bromide ( Br − ) ⟶ Halogenated DBPs
Key Factors Influencing DBP Formation Kinetics
Precursor Concentration: Higher levels of Total Organic Carbon (TOC) , Dissolved Organic Carbon (DOC) , and humic/fulvic acids exponentially increase DBP formation potential.
Disinfectant Type and Dose: Free chlorine produces significantly higher concentrations of trihalomethanes and haloacetic acids than combined chlorine (chloramines) or chlorine dioxide.
Water Age (Contact Time): TTHM concentrations continue to rise as treated water resides inside long transmission pipelines and storage tanks.
Water Temperature: Warm summer temperatures accelerate reaction kinetics, causing peak DBP spikes during July through September.
Water pH:
TTHM formation increases at elevated pH due to base-catalyzed haloform reactions.
HAA5 formation increases at neutral to slightly acidic pH .
Bromide Ion Concentration: In the presence of naturally occurring bromide ( Br − \text{Br}^- Br − ), hypochlorous acid oxidizes bromide to hypobromous acid ( HOBr \text{HOBr} HOBr ), leading to brominated DBP species which carry higher carcinogenic and mutagenic potency than chlorinated species.
Loading diagram... DBP Precursor Removal, Formation Pathway & Regulatory Compliance Tracking
2. Regulated DBP Classes and Health Limits
The EPA and CDPHE Regulation 11 establish strict Maximum Contaminant Levels (MCLs) for regulated byproducts:
Total Trihalomethanes (TTHM) — MCL = 0.080 mg/L (80 µg/L)
TTHMs represent the sum of four volatile, tri-halogenated methane compounds:
Chloroform ( CHCl 3 \text{CHCl}_3 CHCl 3 ) — Typically the most abundant species in low-bromide water.
- Bromodichloromethane ( CHBrCl 2 \text{CHBrCl}_2 CHBrCl 2 )
- Dibromochloromethane ( CHBr 2 Cl \text{CHBr}_2\text{Cl} CHBr 2 Cl )
- Bromoform ( CHBr 3 \text{CHBr}_3 CHBr 3 )
Health Effects: Chronic lifetime exposure is linked to increased risks of bladder and colorectal cancers, as well as adverse liver and kidney effects.
Five Haloacetic Acids (HAA5) — MCL = 0.060 mg/L (60 µg/L)
HAA5 represents the sum of five carboxylic acid compounds:
- Monochloroacetic Acid (MCAA) ( ClCH 2 COOH \text{ClCH}_2\text{COOH} ClCH 2 COOH )
- Dichloroacetic Acid (DCAA) ( Cl 2 CHCOOH \text{Cl}_2\text{CHCOOH} Cl 2 CHCOOH )
- Trichloroacetic Acid (TCAA) ( Cl 3 CCOOH \text{Cl}_3\text{CCOOH} Cl 3 CCOOH )
- Monobromoacetic Acid (MBAA) ( BrCH 2 COOH \text{BrCH}_2\text{COOH} BrCH 2 COOH )
- Dibromoacetic Acid (DBAA) ( Br 2 CHCOOH \text{Br}_2\text{CHCOOH} Br 2 CHCOOH )
Health Effects: Linked to developmental issues, reproductive complications, and increased lifetime cancer risk.
Other Regulated Inorganic DBPs
Bromate ( BrO 3 − \text{BrO}_3^- BrO 3 − ): MCL = 0.010 mg/L (10 μ g/L) \text{MCL} = \mathbf{0.010\text{ mg/L (10 }\mu\text{g/L)}} MCL = 0.010 mg/L (10 μ g/L) , formed exclusively when ozone oxidizes bromide.
Chlorite ( ClO 2 − \text{ClO}_2^- ClO 2 − ): MCL = 1.0 mg/L \text{MCL} = \mathbf{1.0\text{ mg/L}} MCL = 1.0 mg/L , formed as a breakdown byproduct of chlorine dioxide.
3. Stage 1 vs. Stage 2 DBP Rule Compliance
- Regulatory Metric Stage 1 DBP Rule Stage 2 DBP Rule
- Averaging Method Running Annual Average (RAA) Locational Running Annual Average (LRAA)
Calculation Basis System-wide average across all monitoring locations over 4 consecutive quarters Individual rolling 4-quarter average calculated separately at each specific sampling site
Vulnerability Low DBP sites could mask high DBP levels at dead-ends Every single monitoring location must independently comply with the MCL
Site Selection Representative distribution points Based on Initial Distribution System Evaluation (IDSE) targeting peak TTHM (high water age) and peak HAA5 (average water age)
Operational Evaluation Levels (OEL)
To proactively catch upward DBP trends before a full regulatory violation occurs, the Stage 2 DBPR requires systems to track the Operational Evaluation Level (OEL) at every monitoring site at the end of each quarter: OEL = Quarter 1 + Quarter 2 + 2 × ( Current Quarter 3 ) 4 \text{OEL} = \frac{\text{Quarter } 1 + \text{Quarter } 2 + 2 \times (\text{Current Quarter } 3)}{4} OEL = 4 Quarter 1 + Quarter 2 + 2 × ( Current Quarter 3 )
If the calculated OEL exceeds 0.080 mg/L for TTHM or 0.060 mg/L for HAA5 at any location, the system has triggered an OEL exceedance. While not an immediate MCL violation, the utility must conduct a thorough internal operational evaluation and submit an OEL Report to CDPHE within 90 days detailing root causes (e.g., source water TOC spikes, elevated clearwell storage levels, treatment anomalies) and corrective action plans.
4. Enhanced Coagulation Requirements for TOC Removal
Under Stage 1/2 DBPR, conventional surface water treatment plants must practice Enhanced Coagulation to aggressively remove organic DBP precursors prior to adding chlorine. The rule defines mandatory Step 1 TOC percent removal requirements based on raw water TOC and alkalinity:
Raw Water TOC (mg/L) Raw Water Alkalinity: 0–60 mg/L Raw Water Alkalinity: >60–120 mg/L Raw Water Alkalinity: >120 mg/L
- > 2.0 to 4.0 35.0% Removal 25.0% Removal 15.0% Removal
- > 4.0 to 8.0 45.0% Removal 35.0% Removal 25.0% Removal
- > 8.0 50.0% Removal 40.0% Removal 30.0% Removal
Note: Systems with raw water TOC ≤ 2.0 mg/L \le 2.0\text{ mg/L} ≤ 2.0 mg/L or treated water TOC ≤ 2.0 mg/L \le 2.0\text{ mg/L} ≤ 2.0 mg/L , or with Specific Ultraviolet Absorbance (SUVA) ≤ 2.0 L/mg ⋅ m \le 2.0\text{ L/mg}\cdot\text{m} ≤ 2.0 L/mg ⋅ m , are exempt from enhanced coagulation requirements under alternative compliance criteria.
5. Operational Mitigation Strategies
Water systems employ five primary operational and engineering tactics to keep TTHM and HAA5 concentrations well below regulatory thresholds:
Relocating the Point of Chlorination: Moving the primary chlorine injection point from the raw water intake to the settled water flume or filter effluent allows coagulation, flocculation, and sedimentation to remove up to 40–60% of organic precursors before chlorine is introduced.
Optimizing Coagulation pH: Depressing coagulation pH to 5.8–6.3 with alum or acid addition maximizes the charge neutralization and precipitation of humic organic acids.
Distribution Water Age Reduction:
Deep cycling of finished water storage tanks to maintain 30–50% daily turnover.
Automated, schedule-based flushing of dead-end distribution mains.
Installing hydrodynamic mixing systems inside elevated storage tanks to eliminate thermal stratification and stagnant pockets.
Aeration and Tank Stripping: Installing diffused aeration or spray nozzle stripping systems inside finished water storage reservoirs to volatilize and strip out formed TTHMs (specifically chloroform).
Switching to Secondary Chloramination: Utilizing free chlorine exclusively for clearwell primary disinfection (to meet CT), followed by the addition of ammonia to convert to monochloramines before water enters the distribution network.