Study guide

2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity

Colorado Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: State Laws, Regulations & CCWP Certification

1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting

2 Chapter 2: Source Water & Drinking Water Treatment Processes

2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle

3 Chapter 3: Disinfection & Chemical Addition

3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices

4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance

4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management

5 Chapter 5: Wastewater Treatment Principles & Biological Processes

5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects

6 Chapter 6: Advanced Wastewater Treatment & Solids Management

6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84

7 Chapter 7: Water Distribution Systems

7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems

8 Chapter 8: Wastewater Collection Systems

8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment

9 Chapter 9: Pumps, Motors & Utility Mechanics

9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control

10 Chapter 10: Laboratory Analysis & Water Quality Monitoring

10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)

11 Chapter 11: Operator Mathematics & Applied Calculations

11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance

12 Chapter 12: Safety, Emergency Operations & Compliance

12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties

2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity

Key Takeaways Explain This Topic AI

Static water level is the distance from a reference point to the water surface with the pump off; pumping water level is the same measurement after the water level has stabilized during pumping.

Drawdown equals pumping water level minus static water level, and specific capacity equals well yield in gallons per minute divided by drawdown in feet.

A confined artesian aquifer sits between confining layers and its potentiometric surface can rise above the top of the aquifer, while an unconfined water-table aquifer is recharged directly from above.

Declining specific capacity over time signals well or screen fouling, incrustation, or aquifer decline rather than a pump failure by itself.

Wellheads must be sealed, vented with a downturned screened vent, fitted with a sanitary seal and sampling tap, and elevated above the surrounding grade and any flood level.

Last updated: August 2026

Why groundwater knowledge is on the exam

Roughly one in seven scored questions on the WPI Water Treatment Operator Class I exam falls under Source Water Characteristics , and the outline is explicit: measure static water level and pumping levels of wells, inspect groundwater sources for issues that may affect water quality such as contamination, flooding, and wellhead protection, and evaluate biological, chemical, and physical source characteristics. In Colorado, where the majority of small public water systems are groundwater systems, these are daily tasks rather than theory.

Aquifers and the vocabulary of a well

An aquifer is a saturated geologic formation that will yield usable quantities of water to a well. An aquitard or confining layer is a low-permeability unit that restricts flow.

Unconfined (water table) aquifer. The upper surface of the saturated zone is at atmospheric pressure. It is recharged directly from precipitation and surface infiltration above it, which also means it is the most vulnerable to surface contamination .

Confined (artesian) aquifer. Saturated material bounded above and below by confining layers. Water in the aquifer is under pressure, so the level in a well rises above the top of the aquifer to the potentiometric surface . Where that surface is above ground, the well flows without pumping.

Perched aquifer. A localized saturated lens above the regional water table, sitting on a discontinuous confining layer. Perched zones often produce erratic yields and poor water quality.

Key measurements, all taken from a fixed measuring point such as the top of the casing:

  • Term Definition
  • Static water level Depth to water with the pump off and the level recovered
  • Pumping water level Depth to water after the level has stabilized while pumping
  • Drawdown Pumping water level minus static water level, in feet
  • Cone of depression The conical drop in the water surface around a pumping well
  • Radius of influence Horizontal distance from the well to the edge of the cone
  • Well yield Discharge rate the well delivers, in gpm
  • Specific capacity Yield divided by drawdown, in gpm per foot
  • Residual drawdown Remaining drawdown at a given time after the pump stops

Water levels are read with an electric sounding tape (a probe closes a circuit at the water surface and a light or buzzer sounds), an air line and pressure gauge (gauge reading in psi times 2.31 gives feet of submergence), or a pressure transducer feeding SCADA.

Worked example: specific capacity

A well has a static water level of 84 ft below the measuring point. Pumping at 320 gpm, the level stabilizes at 146 ft.

  • Drawdown = 146 ft − 84 ft = 62 ft
  • Specific capacity = 320 gpm ÷ 62 ft = 5.2 gpm per foot

Six months later the same pump delivers 300 gpm with a pumping level of 178 ft:

  • Drawdown = 178 − 84 = 94 ft
  • Specific capacity = 300 ÷ 94 = 3.2 gpm per foot

Specific capacity has fallen by nearly 40 percent. That is the diagnostic signal. Because static level is unchanged, the regional aquifer has not dropped; the loss is at the well itself — incrustation of carbonate or iron and manganese scale on the screen, biofouling by iron bacteria, or sand plugging of the gravel pack. The corrective actions are mechanical (surging, brushing, jetting) and chemical (acidization or chlorination) well rehabilitation, not simply installing a bigger pump.

Groundwater quality and the GWUDI question

Groundwater is filtered by the formation, so it is usually low in turbidity and free of Giardia and Cryptosporidium . That advantage disappears if the well is actually drawing surface water through fractures, karst, or shallow alluvium. A source determined to be groundwater under the direct influence of surface water (GWUDI) must be treated as a surface water: filtration and disinfection under the Surface Water Treatment Rules. Indicators the Division evaluates include rapid turbidity, temperature, or conductivity response to precipitation and runoff; the presence of insect parts, algae, or Giardia cysts; shallow depth; and proximity to a stream. A Colorado Class T certificate is valid only on groundwater not under the direct influence of surface water — that is one reason the determination matters to operators.

Characteristic groundwater quality problems are chemical and physical rather than microbial:

Iron and manganese. Dissolved in the reduced aquifer, they oxidize on contact with air or chlorine and produce red or black water and stained laundry. Secondary standards are 0.3 mg/L iron and 0.05 mg/L manganese.

Hardness. Calcium and magnesium dissolved from limestone and dolomite; drives scaling and softening decisions.

Hydrogen sulfide. Rotten-egg odor from sulfate-reducing bacteria; removed by aeration or oxidation.

Nitrate. From septic systems, fertilizer, and feedlots; the MCL is 10 mg/L as nitrogen and an exceedance is acute.

Radionuclides, arsenic, and fluoride. Naturally occurring in parts of Colorado, particularly in some deep bedrock aquifers.

Methane and carbon dioxide. Cause gas binding in pumps and aggressive, corrosive water.

Sanitary protection of the wellhead

Inspecting groundwater sources for issues that may affect water quality is a listed job task. A compliant wellhead has:

Casing extended above grade — commonly at least 12 inches above the finished floor or ground, and above the highest known flood elevation.

A sanitary well seal or welded cap that prevents entry of surface water, insects, and vermin along the casing and around the discharge piping and wiring.

A downward-facing, screened vent using corrosion-resistant 24-mesh screen.

A grouted annular space to seal the borehole against downward migration of surface water along the outside of the casing.

Ground sloped away from the well and a concrete pad or floor drained to daylight.

A raw-water sampling tap ahead of any treatment, and a means of measuring water level.

An air gap on any discharge to waste so that no cross connection exists.

When an operator finds the casing at grade in a pit that floods, a missing well seal, an unscreened vent, or a pressure tank drain submerged in a sump, those are the significant deficiencies a sanitary survey will cite. Wellhead protection extends the same idea outward: delineating the contribution area, inventorying potential contaminant sources such as fuel tanks, septic systems, and chemical storage, and managing land use inside the protection zone.

Loading diagram... Well Terminology and Diagnostic Logic