Study guide
2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans
Key Takeaways Explain This Topic AI
Source water characteristics are grouped as biological, chemical, and physical, and each group is matched to a specific treatment barrier rather than to treatment in general.
Giardia lamblia and Cryptosporidium are chlorine-resistant protozoan cysts and oocysts, which is why the Surface Water Treatment Rules rely on filtration credit as well as disinfection.
Colorado's multiple-barrier approach starts with source protection, so a watershed or wellhead protection plan is a treatment barrier, not merely paperwork.
Total organic carbon is the principal disinfection byproduct precursor, so raw-water TOC and alkalinity drive enhanced coagulation requirements.
Reservoir turnover in spring and fall mixes anoxic bottom water upward, raising iron, manganese, taste and odor compounds, and treatment demand within days.
Last updated: August 2026
Reading a source before you treat it
The WPI outline lists five source water characteristics an operator must evaluate: biological (bacteria, protozoa, viruses), chemical , physical , potential sources of source water contamination , and supply . That list is the exam's organizing frame, and it is also the correct operational frame, because each characteristic maps to a different barrier in the treatment train.
Biological characteristics
Organism group Examples Operational significance
Bacteria E. coli , Salmonella , Campylobacter , Legionella Readily inactivated by free chlorine at normal CT; total coliform is the indicator group
Protozoa Giardia lamblia , Cryptosporidium Cysts and oocysts are chlorine resistant ; removal depends on coagulation and filtration, and inactivation on UV or ozone
Viruses Norovirus, hepatitis A, enteroviruses Very small, poorly removed by filtration alone, but readily inactivated by free chlorine
Algae Cyanobacteria, diatoms, filamentous forms Cause taste and odor (geosmin, MIB), filter clogging, pH swings, and cyanotoxins
Nuisance organisms Iron and sulfur bacteria, Asiatic clam , zebra and quagga mussels Fouling of intakes, screens, and piping
The Surface Water Treatment Rules require 3-log (99.9 percent) removal or inactivation of Giardia , 4-log (99.99 percent) of viruses , and, under LT2, 2-log removal of Cryptosporidium for filtered systems. The reason the rules speak of removal or inactivation is precisely this table: chlorine handles viruses and bacteria well and Cryptosporidium essentially not at all, so the protozoan requirement is met by physical removal plus, where needed, UV.
Chemical characteristics
Inorganics with health-based MCLs: arsenic, nitrate and nitrite, fluoride, selenium, antimony, barium, cadmium, chromium, mercury, thallium, cyanide, and radionuclides including uranium, radium, and gross alpha.
Aesthetic (secondary) constituents: iron, manganese, sulfate, chloride, total dissolved solids, zinc, silver, and color.
Organics: volatile organic compounds from fuels and solvents, synthetic organics including pesticides and herbicides, and PFAS , which Colorado regulates and monitors and which are removed principally by granular activated carbon, ion exchange, or reverse osmosis.
Total organic carbon (TOC). Natural organic matter is the precursor that reacts with chlorine to form trihalomethanes and haloacetic acids. Raw-water TOC and alkalinity together set the enhanced-coagulation TOC removal percentage a conventional plant must meet.
Alkalinity, hardness, pH, and temperature. These are not contaminants but they control coagulation chemistry, disinfection kinetics, corrosion, and softening decisions.
Physical characteristics
Turbidity is the master physical parameter: it interferes with disinfection by shielding organisms, indicates filter performance, and is itself a regulated treatment technique standard. Temperature governs reaction rates, dissolved oxygen, and CT — cold Colorado source water requires substantially more contact time for the same log inactivation. Color , taste and odor , and suspended and dissolved solids round out the group.
Where contamination comes from
Potential contaminant sources are conventionally split two ways:
Point sources — a discrete conveyance: a permitted outfall, a sewer overflow, a leaking underground storage tank, a mine adit, or a chemical spill at a road crossing.
Nonpoint sources — diffuse runoff: agriculture and grazing, urban stormwater, forestry and logging roads, failing septic systems, atmospheric deposition, and abandoned mine drainage. Colorado adds two that matter locally: wildfire burn scars , which deliver enormous turbidity, ash, nutrient, and manganese loads for years after a fire, and spring snowmelt , which concentrates a year's watershed loading into a few weeks.
Reservoir behavior: stratification and turnover
A Colorado storage reservoir is not a uniform body of water. In summer it stratifies into three layers:
Epilimnion — warm, well mixed, oxygenated surface layer; algae grow here.
Metalimnion (thermocline) — the zone of rapid temperature change that blocks vertical mixing.
Hypolimnion — cold, dense bottom layer that becomes anoxic as settled organic matter decays.
Under anoxic conditions the sediments release soluble iron and manganese , hydrogen sulfide , ammonia , and phosphorus , and the water becomes reducing. In autumn the surface cools until its density matches the bottom layer and the reservoir turns over , mixing all of that upward within days. Spring turnover repeats the process after ice-out. The operational consequence is abrupt: raw manganese may jump from below detection to several tenths of a milligram per liter, taste and odor complaints spike, chlorine demand rises, and coagulant dose must be reset. Multi-level intake structures exist so the operator can draw from whichever depth has the best water — and knowing when to switch ports is a genuine operator skill.
Source water protection as a treatment barrier
Colorado's Source Water Assessment and Protection (SWAP) program, run by CDPHE's Water Quality Control Division, delineated a source water assessment area for every public water system and inventoried the potential contaminant sources within it. A system then develops a voluntary Source Water Protection Plan , usually with help from the Colorado Rural Water Association, containing:
Delineation of the protection area — a watershed boundary for surface sources, or a time-of-travel capture zone for wells.
A contaminant source inventory kept current.
Management approaches — land-use agreements and easements, spill response coordination with local emergency responders, road salt and hazardous materials routing agreements, septic system programs, grazing and forestry best management practices, and post-fire mitigation partnerships.
Contingency planning for the loss of a source, including interconnections and alternate supplies.
Public education and stakeholder involvement.
Following the plan is a listed WPI job task, and it is the outermost ring of the multiple-barrier approach : source protection, then treatment, then disinfection, then a protected distribution system, then monitoring. Every barrier you keep intact reduces what the next one has to do.