Study guide
12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
Key Takeaways Explain This Topic AI
Regulation 100 section 100.12.6 requires the operator in responsible charge to develop and maintain a written operating plan so the facility can run correctly in their absence.
Records are made at the time of observation, corrected only with a single line plus the correct value, initials, and date, and must reflect what actually happened including upsets.
Complaint logs must capture the specific description rather than a generic label, and mapping complaints reveals whether the cause is a dead end, an unlined main, or a single customer's plumbing.
Milky water that clears from the bottom of the glass upward is entrained air, while iron and manganese produce color that settles downward.
Chemical and energy optimization is tracked as pounds per million gallons and kilowatt-hours per million gallons, because normalized trends survive changes in flow and staffing.
Last updated: August 2026
The paperwork is part of the job
Every WPI discipline outline devotes a share of its Security, Safety, and Administrative Procedures content area to records, reports, procedures, and supervision. The water treatment outline lists develop and maintain SOPs , evaluate and maintain operating records , complete reports on plant operation , track and maintain inventory , optimize the use of energy and chemicals , respond to consumer complaints , and perform supervisory duties including enforcing policies and safety procedures . The collection outline adds planning and organization of work activities , record-keeping and evaluation of data , responses to public complaints , report writing (federal, internal, state) , monitor status of customer work orders , maintain knowledge of current regulatory requirements , and train new operators .
Standard operating procedures
An SOP converts one experienced operator's knowledge into something the whole organization owns. Regulation 100 section 100.12.6 makes this a legal requirement in Colorado: the certified operator in responsible charge must develop and maintain a written operating plan so the facility can be run correctly when the ORC is not present.
A usable SOP contains:
Purpose and scope — what it covers and when it applies.
Responsibilities — who may perform the task and what qualification is required.
Safety requirements up front — PPE, permits (confined space, LOTO, hot work), and hazards.
Equipment and materials.
Step-by-step procedure in the actual order of operations, with setpoints, valve positions, and acceptance criteria stated numerically.
Normal and abnormal outcomes , and what to do when the abnormal occurs.
Records to be completed.
References — regulation, permit condition, or manufacturer's manual.
Revision control — version, date, author, approver, and review interval.
SOPs are living documents. Every process change, equipment replacement, near miss, and regulatory change should trigger a review. An SOP that describes equipment the plant no longer owns is worse than no SOP, because it teaches new operators something false.
Records and reports
- Record Retention driver
- Daily operating logs Permit and Regulation 11 requirements
- Laboratory bench sheets and reports Compliance evidence behind reported values
- Monthly reports to CDPHE; DMRs to the Division Regulation 11 and CDPS permit
- Equipment maintenance and calibration records Asset management and defensibility
- Confined space permits, LOTO logs, training records OSHA
- Bacteriological and chemical monitoring results Drinking water rules; typically long retention
- Backflow prevention program annual report Regulation 11.39, due to CDPHE by May 1
- Biosolids annual report Regulation 64, generally due March 1
- Consumer Confidence Report Community water systems, annually
Three rules apply to every one of them: record at the time of observation; never erase — correct with a single line, the correct value, initials, and date; and record what actually happened, including the upset. Falsifying a record is a criminal act and, under Regulation 100 section 100.13, grounds for suspension or revocation of a Colorado certificate.
Customer complaints and public interaction
WPI lists responding to consumer complaints in the water outlines and investigating customer issues such as sewer backups and odor complaints in the collection outline. Complaint handling is both customer service and a diagnostic data stream .
A structured response:
Log it — date, time, address, complainant, and the specific description. "Bad water" is not a record; "yellow-brown water, worst first thing in the morning, started Tuesday" is.
Ask the diagnostic questions. Hot or cold side, one fixture or all, how long, does it clear after running, are neighbors affected.
Respond in the field — measure chlorine residual, pressure, and temperature at the tap; look at the water.
Map it. Plotting complaints reveals the pattern: a cluster at a dead end, a line of complaints along an unlined main, or a single house that is a plumbing problem.
Close the loop with the customer. Tell them what you found and what you are doing. Most complaint escalation is caused by silence, not by the water.
Common complaint causes worth carrying: discolored water from disturbed iron deposits after a main break, hydrant use, or a flow reversal; milky or cloudy water from entrained air, which clears from the bottom up in a glass; rotten egg odor usually from the water heater anode rather than the main; chlorinous taste from residual changes; and sewer odor at a fixture usually from a dry trap.
Supervisory duties and training
Enforcing policies and safety procedures is listed explicitly. A supervisor who tolerates an unpermitted confined space entry has authorized it.
Training new operators is a listed collection job task. Effective training pairs SOPs with documented, supervised practice and a competency sign-off, not a stack of reading.
Work planning and organization — sequencing work orders, staging materials and permits, coordinating shutdowns and customer notifications, and closing work orders with real findings.
Monitoring work order status so customer commitments are met and backlog is visible.
Maintaining knowledge of current regulatory requirements — this is what Colorado's mandatory regulatory training exists to support, and it is why every certificate cycle requires it again.
Optimization as an administrative duty
WPI places optimizing energy and chemical use in the administrative content area for a reason: it is managed through records and tracking, not through instinct.
Track chemical use in pounds per million gallons and energy in kilowatt-hours per million gallons , and trend both.
Review the jar test optimum seasonally rather than leaving a dose set from last year.
Shift pumping to off-peak hours where rates allow.
Track inventory with min-max levels and reorder points based on lead time.
Close the loop by reporting the results, because an optimization that is not measured will not survive the next staffing change.