Study guide
5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth
Key Takeaways Explain This Topic AI
Activated sludge is an aerobic suspended-growth biological process where heterotrophic bacteria oxidize carbonaceous BOD to CO2, H2O, and new bacterial biomass (cell synthesis).
The active biomass inventory is quantified as Mixed Liquor Suspended Solids (MLSS: 1,500–3,500 mg/L in conventional systems) and Mixed Liquor Volatile Suspended Solids (MLVSS: 70–85% of MLSS, representing the active biological fraction).
Microscopic examination of protozoa and metazoa serves as an essential real-time indicator of sludge age: amoebae/flagellates indicate young/overloaded sludge, stalked/free-swimming ciliates indicate optimal mature sludge, and rotifers/nematodes indicate old/under-loaded sludge.
The biological growth curve transitions through lag, exponential (log) growth, declining growth, and endogenous respiration phases; conventional activated sludge operates in the declining growth phase to ensure strong bio-flocculation.
Aeration basin Dissolved Oxygen (DO) must be maintained strictly between 1.5 and 3.0 mg/L (minimum 2.0 mg/L for nitrification) to sustain aerobic kinetics while avoiding floc shear and energy waste from over-aeration.
Last updated: August 2026
Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth
The activated sludge process is the global standard for secondary biological wastewater treatment. Originally developed by Edward Arden and W.T. Lockett in Manchester, England in 1914, it utilizes an engineered, aerobic, suspended-growth culture of microorganisms ( mixed liquor ) to metabolize dissolved, colloidal, and non-settleable organic pollutants. The active biomass converts biochemical oxygen demand (BOD) into stable inorganic end-products ( C O 2 CO_2 C O 2 , H 2 O H_2O H 2 O ) and high-density, bio-flocculated cellular masses that settle readily in secondary clarifiers.
1. Biological Oxidation and Heterotrophic Metabolism
Biological treatment transforms organic carbon into harmless end-products through two concurrent metabolic pathways catalyzed by heterotrophic bacteria : +------------------------------------------------+
- | HETEROTROPHIC BACTERIAL METABOLISM |
- +------------------------------------------------+
- |
- +-------------------------------+-------------------------------+
- | |
- v v
- [ 1. CATABOLISM (Energy Production) ] [ 2. ANABOLISM (Cell Synthesis) ]
- Organics (BOD) + O2 Organics (BOD) + NH3 + H2PO4- + O2 + Energy
- v v
- CO2 + H2O + Energy (ATP) New Bacterial Cell Tissue (C5H7NO2) + H2O
- Stoichiometry and Cell Empirical Formula
Bacterial cellular protoplasm is empirically represented by the chemical formula C 5 H 7 NO 2 \text{C}_5\text{H}_7\text{NO}_2 C 5 H 7 NO 2 (or C 5 H 7 NO 2 P 0.074 \text{C}_5\text{H}_7\text{NO}_2\text{P}_{0.074} C 5 H 7 NO 2 P 0.074 when phosphorus is included): Organics (BOD) + O 2 + Nutrients (N, P) → Bacteria C 5 H 7 NO 2 + CO 2 + H 2 O \text{Organics (BOD)} + \text{O}_2 + \text{Nutrients (N, P)} \xrightarrow{\text{Bacteria}} \text{C}_5\text{H}_7\text{NO}_2 + \text{CO}_2 + \text{H}_2\text{O} Organics (BOD) + O 2 + Nutrients (N, P) Bacteria C 5 H 7 NO 2 + CO 2 + H 2 O
Catabolism (Respiration) : Heterotrophic bacteria oxidize approximately 60% of incoming soluble BOD to generate ATP energy, releasing carbon dioxide and water.
Anabolism (Synthesis) : Heterotrophs utilize the remaining 40% of metabolized BOD along with inorganic nitrogen (ammonia / N H 4 + NH_4^+ N H 4 + ) and phosphorus (orthophosphate / H 2 P O 4 − H_2PO_4^- H 2 P O 4 − ) to synthesize new microbial cells ( sludge yield ).
Nutrient Stoichiometry : To sustain unrestricted aerobic synthesis without triggering nutrient-deficient bulking, wastewater must maintain a minimum stoichiometric nutrient ratio: BOD 5 : Nitrogen (N) : Phosphorus (P) = 100 : 5 : 1 \text{BOD}_5 : \text{Nitrogen (N)} : \text{Phosphorus (P)} = 100 : 5 : 1 BOD 5 : Nitrogen (N) : Phosphorus (P) = 100 : 5 : 1
If raw wastewater is deficient in nitrogen or phosphorus (common in industrial or food processing discharges), bacterial synthesis is crippled, leading to the overproduction of non-filamentous zoogloeal slime or severe filamentous overgrowth.
2. Microscopic Evaluation and Indicator Organisms
While bacteria perform the vast majority of biochemical oxidation, they are too small ( 0.5 to 2.0 μ m 0.5\text{ to }2.0\ \mu\text{m} 0.5 to 2.0 μ m ) to identify individually under standard phase-contrast brightfield microscopy (100x to 400x). Fortunately, single-celled protozoa ( 10 to 200 μ m 10\text{ to }200\ \mu\text{m} 10 to 200 μ m ) and multicellular metazoa ( 0.1 to 1.0 mm 0.1\text{ to }1.0\text{ mm} 0.1 to 1.0 mm ) act as living barometers of process health, sludge age, and environmental stability. +---------------------------------------------------------------------------------------------+
- | MICROBIOLOGICAL SUCCESSION ACROSS INCREASING SLUDGE AGE |
- +---------------------------------------------------------------------------------------------+
- | Organism Class | Representative Genera | Sludge Condition & MCRT | Effluent Clarity |
- +------------------+----------------------------+-------------------------+-------------------+
- | Amoebae | Arcella, Chaos, Amoeba | Very Young (MCRT < 2 d) | Turbid, high |
- | | | High F/M, low DO, shock | dispersed solids |
- | Flagellates | Bodo, Euglena, Monas | Young (MCRT 1 to 3 d) | Cloudy, straggler |
- | | | High organic loading | floc carryover |
- | Free-Swimming | Paramecium, Colpidium, | Transitional (MCRT 3-6d)| Moderate clarity, |
- | Ciliates | Lionotus, Chilodonella | Moderate F/M | active grazing |
- | Stalked Ciliates | Vorticella, Carchesium, | Optimal (MCRT 6 to 15 d)| Crystal-clear, |
- | | Opercularia, Epistylis | Mature, healthy floc | tight compact floc|
- | Rotifers & | Philodina, Rotaria, | Old Sludge (MCRT > 15 d)| Fast settling, |
- | Nematodes | Nematode worms, Tardigrades| Low F/M, high MCRT | pin floc, ashing |
- +---------------------------------------------------------------------------------------------+
- Indicator Roles and Ecological Functions
Amoebae and Flagellates : Possess primitive motility and feed on dissolved organic matter and free-swimming dispersed bacteria. They dominate during plant startups, organic shock overloads, or recovery from toxic spills.
Free-Swimming and Crawling Ciliates : Cilia propel the organism or allow it to crawl over floc surfaces. They actively consume single, un-flocculated bacteria, clarifying the water column.
Stalked Ciliates : Anchor their contractile stalks directly into the floc matrix, creating localized water vortices with head cilia to ingest free-swimming bacteria. Their dominance indicates a stable, well-flocculated, mature mixed liquor with excellent settling characteristics .
Rotifers and Nematodes : Multicellular organisms with specialized digestive tracts and grinding mastax organs. They ingest large, dense floc fragments and mineral debris. Their presence signifies an old sludge age (long MCRT, low F/M) and complete nitrification.
Floc Structure and Extracellular Polymeric Substances (EPS)
A healthy activated sludge floc consists of thousands of bacterial colonies held together by a natural polymer matrix known as Extracellular Polymeric Substances (EPS) (composed of polysaccharides, glycoproteins, lipids, and extracellular DNA). EPS gives floc its sticky, cohesive property ( bio-sorption ), allowing it to entrap colloidal particles in seconds. Filamentous bacteria act as an internal structural backbone; however, excessive filament extension causes bulking.
3. The Bacterial Growth Curve
When a bacterial population is introduced to organic substrate in a batch or plug-flow biological reactor, growth progresses through four classical physiological phases: Biomass Concentration & Substrate Dynamics:
- Biomass Mass (X) ^ /---\ [ 3. Declining Growth ] (Target for Conventional)
- | / \
- | [ 2. Log]/ \------\ [ 4. Endogenous Respiration ]
- | Growth/ \ (Target for Extended Aeration)
- | [1. Lag] / \
- +-----------+------------------------------------> Time
- | Substrate (S) \_ _ _ _
- | \_ _ _ _ _ _ _ _ _ _ _ _
Lag Phase : Microorganisms acclimate to new environmental conditions, synthesizing required catabolic enzymes without significant cell division.
Log (Exponential) Growth Phase : Food is in vast excess ( F / M ≫ 1.0 F/M \gg 1.0 F / M ≫ 1.0 ). Cell division occurs at the maximum specific growth rate ( μ max \mu_{\text{max}} μ max ). Bacteria remain as dispersed individual cells; EPS production is low, resulting in zero bio-flocculation and non-settleable mixed liquor.
Declining Growth Phase : Available food becomes rate-limiting ( F / M = 0.2 to 0.5 F/M = 0.2\text{ to }0.5 F / M = 0.2 to 0.5 ). Growth slows as bacteria compete for substrate. Microbes secrete dense EPS sticky sheaths, initiating massive bio-flocculation . Conventional activated sludge facilities operate in this phase to achieve maximum BOD removal and excellent settling .
Endogenous Respiration Phase : Food is virtually exhausted ( F / M < 0.1 F/M < 0.1 F / M < 0.1 ). Bacteria catabolize their own internal cellular reserves and lyse dead cell mass for energy ( auto-oxidation ). Sludge yield is minimal, and settling is rapid, though over-aeration can produce sheared pin floc. Extended aeration plants and oxidation ditches operate in this phase .
4. Dissolved Oxygen (DO) Control Targets
Dissolved oxygen is the terminal electron acceptor that drives aerobic heterotrophic respiration and autotrophic nitrification. +-------------------------------------------------------------------------------------+
- | AERATION BASIN DISSOLVED OXYGEN (DO) TARGETS |
- | |
- | Conventional Carbonaceous BOD Removal: 1.5 to 2.5 mg/L |
- | Biological Nitrification Systems: 2.0 to 3.0 mg/L |
- | Critical Minimum Threshold (Basin Outlet): 1.5 mg/L |
- | Upper Operational Limit (Over-Aeration): > 3.5 to 4.0 mg/L |
- +-------------------------------------------------------------------------------------+
- Operational Consequences of DO Extremes
Under-Aeration ( D O < 1.0 mg/L DO < 1.0\text{ mg/L} D O < 1.0 mg/L ) : Severely retards metabolic rates; halts autotrophic nitrification; creates anoxic micro-zones that favor low-DO filamentous organisms ( Sphaerotilus natans , Type 1701 , Haliscomenobacter hydrossis ); turns mixed liquor dark brown/black with putrid sulfide odors.
Over-Aeration ( D O > 4.0 mg/L DO > 4.0\text{ mg/L} D O > 4.0 mg/L ) : Wastes immense electrical blower energy (which accounts for 50% to 65% of a municipal plant's total power budget); creates excessive hydraulic turbulence that physically shears fragile floc into non-settleable pin floc ; carries high DO into secondary clarifiers, inhibiting denitrification and risking rising sludge.
Monitoring Respiration: OUR and SOUR
Oxygen Uptake Rate (OUR) : Quantifies the volume of oxygen consumed by mixed liquor over time, expressed in mg O 2 / L/hour \text{mg } O_2/\text{L/hour} mg O 2 / L/hour .
Specific Oxygen Uptake Rate (SOUR / Respiration Rate) : Normalizes OUR to the volatile biomass concentration: SOUR = OUR (mg O 2 / L/hr ) × 1 , 000 MLVSS (mg/L) = mg O 2 / g MLVSS/hour \text{SOUR} = \frac{\text{OUR (mg } O_2/\text{L/hr}) \times 1,000}{\text{MLVSS (mg/L)}} = \text{mg } O_2/\text{g MLVSS/hour} SOUR = MLVSS (mg/L) OUR (mg O 2 / L/hr ) × 1 , 000 = mg O 2 / g MLVSS/hour
Healthy conventional activated sludge exhibits a SOUR between 12 and 20 mg O 2 O_2 O 2 /g MLVSS/hr . A SOUR < 8 < 8 < 8 indicates old/endogenous sludge or toxic inhibition; a SOUR > 30 > 30 > 30 indicates young sludge with high organic loading.
5. Aeration Equipment and Oxygen Transfer Efficiency
Aeration systems must supply adequate molecular oxygen while providing sufficient basin mixing velocity ( > 1.0 ft/s > 1.0\text{ ft/s} > 1.0 ft/s ) to keep mixed liquor solids suspended. +-------------------------------------------------------------------------------------+
- | AERATION SYSTEM EFFICIENCY COMPARISON |
- +-------------------------------------------------------------------------------------+
- | Aerator Class | Bubble Size / Action | SOTE (Clean Water) | Wire Transfer|
- +---------------------+---------------------------+--------------------+--------------+
- | Fine Bubble Membrane| 1 to 2 mm fine bubbles | 20% to 35% | 6.0 to 8.5 |
- | (EPDM / Ceramic) | from floor grid | | lb O2/hp-hr |
- | Coarse Bubble | 6 to 12 mm large bubbles | 8% to 15% | 2.0 to 3.5 |
- | Diffusers | from open orifice tubes | | lb O2/hp-hr |
- | Mechanical Surface | High-speed / low-speed | 1.5 to 2.5 lb O2 | 2.0 to 3.2 |
- | Aerators | surface impeller splash | per hp-hr (field) | lb O2/hp-hr |
- +-------------------------------------------------------------------------------------+
Fine Bubble Diffusers : Maximum surface-area-to-volume ratio creates high Standard Oxygen Transfer Efficiency (SOTE) . However, diffusers are subject to fouling by calcium carbonate scaling, biological slime, or iron precipitates, requiring periodic cleaning with formic acid gas injection or liquid acid washing.
Coarse Bubble Diffusers : Provide high turbulence and non-clogging reliability but require double the air volume to deliver equivalent dissolved oxygen mass.
6. Mixed Liquor Parameters: MLSS and MLVSS
The total biological inventory within the aeration basin is monitored via gravimetric laboratory testing:
Mixed Liquor Suspended Solids (MLSS) : The total concentration of all suspended material in the aeration tank liquid, encompassing living bacteria, dead cell debris, inert mineral silts, and non-biodegradable particles. Conventional activated sludge operates at 1,500 to 3,500 mg/L (extended aeration: 3,000 to 5,000 mg/L ; membrane bioreactors: 8,000 to 12,000 mg/L ).
Mixed Liquor Volatile Suspended Solids (MLVSS) : The fraction of MLSS that volatilizes (burns off) when ignited in a muffle furnace at 550°C ± 50°C . MLVSS represents the active organic biological fraction and typically constitutes 70% to 85% of MLSS in healthy municipal plants.
Fixed Solids (Inert Fraction) : The remaining 15% to 30% inorganic ash. If MLVSS drops below 65% , it indicates excessive accumulation of inert fine grit, silt, or chemical precipitates requiring increased sludge wasting.