Study guide
7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management
Colorado Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws, Regulations & CCWP Certification
1.1 CDPHE CCWP Program & Regulatory Framework (Regulation 100 / 5 CCR 1003-2) 1.2 Facility Classification & Operator in Responsible Charge (ORC) Requirements 1.3 Certification Levels, Education, Experience & Exam Eligibility (Class D-A, Grade 1-4, Class S/T) 1.4 License Renewal, Training Units (TUs) & Mandatory Regulatory Training 1.5 Colorado Primary Drinking Water Regulations (Regulation 11) & Compliance 1.6 Colorado Discharge Permit System (Regulations 61/62), DMRs & Biosolids Reporting
2 Chapter 2: Source Water & Drinking Water Treatment Processes
2.1 Raw Water Sources, High-Altitude Characteristics & Reservoir Quality 2.2 Coagulation Chemistry, Rapid Mixing & Chemical Dosing (Alum, Ferric, Polymers) 2.3 Flocculation & Sedimentation Basin Design, Operation & Settling Zones 2.4 Granular Media Filtration, Backwash Procedures & Turbidity Standards 2.5 Advanced Treatment: Membranes, Softening, GAC/PAC Adsorption & Aeration 2.6 Groundwater Sources, Well Hydraulics, Static and Pumping Levels & Specific Capacity 2.7 Source Water Characteristics, Contaminant Categories & Watershed Protection Plans 2.8 Pretreatment: Presedimentation, Aeration, Algae Control & Taste-and-Odor Management 2.9 Direct, In-Line, Pressure, Cartridge & Diatomaceous Earth Filtration 2.10 Lime-Soda Softening, Ion Exchange & Water Stabilization 2.11 Water Treatment Plant Residuals: Lagoons, Drying Beds, Land Application & Recycle
3 Chapter 3: Disinfection & Chemical Addition
3.1 Chlorine Chemistry: Hypochlorous Acid, Free/Combined Residual & Breakpoint Chlorination 3.2 Disinfection Kinetics, Baffle Factors, T10 & CT Compliance Calculations 3.3 Disinfection Byproducts (TTHMs, HAA5s) & Stage 1/2 DBP Rules 3.4 Alternative Disinfection: Chloramination, Ultraviolet (UV) Light & Chlorine Dioxide 3.5 Corrosion Control, Lead & Copper Rule Revisions (LCRR) & Fluoridation Practices
4 Chapter 4: Water Treatment Plant Equipment, Instrumentation & Maintenance
4.1 Raw Water Intakes, Screening Equipment & Raw Water Pumping 4.2 Chemical Feed Equipment: Feeders, Day Tanks, Carrier Water & Feed-Rate Calibration 4.3 Chlorination Equipment: Gas Systems, Vacuum Regulators, Hypochlorite Storage & Onsite Generation 4.4 Filter Underdrains, Support Gravel, Surface Wash, Air Scour & Filter-to-Waste 4.5 Plant Process Control, SCADA and PLC Systems, Alarm Management & Records of Operation 4.6 Preventive, Corrective and Predictive Maintenance, Work Orders & Asset Management
5 Chapter 5: Wastewater Treatment Principles & Biological Processes
5.1 Preliminary Treatment: Bar Screens, Shredders, Grit Chambers & Flow Equalization 5.2 Primary Clarification, Solids Separation & Scum Removal Mechanics 5.3 Activated Sludge Fundamentals: Aerobic Microbiology, DO Control & Biomass Growth 5.4 Return & Waste Activated Sludge Management (RAS/WAS Operations & Sludge Age) 5.5 Activated Sludge Troubleshooting: Bulking, Nocardia Foaming, Rising Sludge & Pin Floc 5.6 Wastewater Characteristics, Organic and Hydraulic Loading, Diurnal Flow & Septicity 5.7 Activated Sludge Arrangements: Conventional, Complete Mix, Step Feed, Contact Stabilization, Extended Aeration, Oxidation Ditch, SBR & MBR 5.8 Aeration Systems: Blowers, Diffusers, Surface Aerators, Oxygen Transfer & Altitude Effects
6 Chapter 6: Advanced Wastewater Treatment & Solids Management
6.1 Biological Nutrient Removal: Nitrification, Denitrification & Anoxic Zones 6.2 Biological & Chemical Phosphorus Removal (EBPR & Coagulant Precipitation) 6.3 Sludge Thickening, Aerobic & Anaerobic Digestion (Mesophilic/Thermophilic) 6.4 Dewatering Equipment (Centrifuges, Belt Filter Presses) & Biosolids Standards (Reg 64) 6.5 Pond & Lagoon Operations, Trickling Filters & Rotating Biological Contactors (RBCs) 6.6 Secondary Clarification: Overflow and Solids Loading Rates, RAS Rate Setting & Clarifier Diagnostics 6.7 Tertiary Filtration, Effluent Polishing & Wastewater Disinfection with Chlorine, Dechlorination and UV 6.8 Effluent Disposal, Rapid Infiltration Basins, Colorado Water Reuse Law & Regulation 84
7 Chapter 7: Water Distribution Systems
7.1 Distribution Hydraulics, Pressure Zones, Static Head & Friction Headloss 7.2 Finished Water Storage Tanks, Standpipes, Mixing & Water Age Control 7.3 Distribution Piping, Valves (Gate, Butterfly, PRV), Hydrants & Main Flushing 7.4 Cross-Connection Control, Hazard Assessment & Backflow Preventers (RPZ, DCVA, PVB, Air Gap) 7.5 Water Main Installation, Trenching, Repair, Pressure Testing & Disinfection (AWWA C651) 7.6 Network Layout, Pressure Zones, Demand Patterns, Fire Flow & the Hydraulic Grade Line 7.7 Fire Hydrants, Dry Barrel Operation, Fire Flow Testing & Unidirectional Flushing 7.8 Booster Pump Stations, Hydropneumatic Systems, Controls & Surge Protection 7.9 Customer and Master Metering, Meter Sizing, Accuracy Testing, AMR & AMI 7.10 System Mapping, GIS, As-Builts, Operational Analysis & the AWWA Water Audit 7.11 Service Line Installation, Wet Tapping, Curb Stops & the Lead Service Line Inventory 7.12 Leak Detection, District Metered Areas, Minimum Night Flow & Pressure Management 7.13 Storage Facility Inspection, Sanitary Defects, Water Age Control, Cleaning & AWWA C652 Disinfection 7.14 Utility Locating, Colorado 811 Damage Prevention, the APWA Color Code & New Construction Inspection 7.15 Well and Wellhead Maintenance, Sanitary Condition, Rehabilitation & AWWA C654 Disinfection 7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management 7.17 Distribution Sampling Technique, Chlorine Residual Monitoring & Nitrification Control in Chloraminated Systems
8 Chapter 8: Wastewater Collection Systems
8.1 Gravity Collection Systems: Flow Velocities, Slopes, Pipe Materials & Manholes 8.2 Wastewater Lift Stations: Wet Wells, Submersible Pumps, Level Controls & Force Mains 8.3 Inflow and Infiltration (I&I) Sources, Flow Monitoring, Smoke Testing & CCTV Inspection 8.4 Collection Maintenance: Hydraulic Jetting, Mechanical Rodding & FOG/Root Mitigation 8.5 Sanitary Sewer Overflows (SSOs): Root Causes, Containment, Reporting & Mitigation 8.6 Lift Station Electrical Devices, Level Detection, Telemetry, Gas Detection & Capacity Adjustment 8.7 Lift Station Configurations, Preventive Maintenance, Wet Well Cleaning, Troubleshooting & Emergency Bypass Pumping 8.8 Collection System Rehabilitation: CIPP, Pipe Bursting, Sliplining, Grouting, Manhole Repair & Tap Defects 8.9 Excavation, Hydro Excavation, Bedding and Haunching, Grade Control & Sewer Acceptance Testing 8.10 Collection System Flow Monitoring, Area-Velocity Metering, Weirs and Flumes & Capacity Assessment
9 Chapter 9: Pumps, Motors & Utility Mechanics
9.1 Centrifugal Pumps: Volutes, Impellers, Packing Seals & Mechanical Seals 9.2 Positive Displacement Pumps (Peristaltic, Diaphragm, Progressive Cavity) & Dosing Systems 9.3 Pump Performance Curves, System Head Curves, Cavitation & NPSH Calculations 9.4 Electric Motors (Single/Three Phase), Controls, Variable Frequency Drives (VFDs) & Power 9.5 Flow Meters (Venturi, Magnetic, Ultrasonic), Online Analyzers, PLCs & SCADA Telemetry 9.6 Air Compressors, Conveyors, Hoists and Cranes, Service Piping & Standby Power Generation 9.7 Valve Types and Duties, Air Release and Air-Vacuum Valves, Water Hammer & Surge Control
10 Chapter 10: Laboratory Analysis & Water Quality Monitoring
10.1 Regulatory Sampling Procedures, Chain of Custody, Holding Times & Preservation Techniques 10.2 Physical & Chemical Drinking Water Testing: Turbidity, pH, Alkalinity, Hardness & Chlorine (DPD) 10.3 Wastewater Laboratory Analysis: BOD5, COD, Total Suspended Solids (TSS) & Settleometry 10.4 Microbiological Testing: Total Coliform, E. coli (Colilert, Membrane Filtration) & QA/QC 10.5 Bench-Scale Jar Testing, Coagulant Optimization & Streaming Current Monitoring 10.6 Laboratory Equipment, Calibration and Verification, QA/QC Program & Certified Laboratory Requirements 10.7 Nutrient Series, Metals Sampling, Whole Effluent Toxicity & Electrode Measurements (DO, pH, ORP, H2S)
11 Chapter 11: Operator Mathematics & Applied Calculations
11.1 Core Conversions, Geometric Area, Pipe Volume & Continuous Flow Rate (MGD, GPM, cfs) 11.2 Chemical Dosage, The Standard "Pounds Formula", Active Chemical & Solution Purity 11.3 Hydraulic Retention Time (HRT), Surface Overflow Rate (SOR) & Weir Overflow Rates 11.4 Process Control Calculations: F/M Ratio, MCRT/Solids Retention Time (SRT) & Sludge Volume Index (SVI) 11.5 Distribution Pressure, Static vs Dynamic Head, Water Horsepower & Wire-to-Water Efficiency 11.6 CT Calculations: Baffling Factors, T10, Temperature and pH Corrections & Multi-Segment Compliance
12 Chapter 12: Safety, Emergency Operations & Compliance
12.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing (O2/LEL/H2S/CO) & Rescue 12.2 Control of Hazardous Energy: Lockout/Tagout (LOTO), Arc Flash & Electrical Safety 12.3 Chemical Safety: Chlorine Gas Handling, Ton Cylinders, Sulfur Dioxide, Ammonia & SDS/GHS 12.4 Trenching & Excavation: Soil Classification, Sloping, Shoring, Shielding & Competent Person Rules 12.5 Emergency Action Plans, Security Vulnerability, Spill Containment & CDPHE Tier 1/2/3 Public Notice 12.6 Work Zone Traffic Control, PPE, Fall Protection, Fire Extinguishers, First Aid & Bloodborne Pathogens 12.7 Standard Operating Procedures, Operating Records, Regulatory Reporting, Customer Complaints & Supervisory Duties
7.16 Booster Chlorination, Remote Chemical Feed, Chemical Storage, Security & Supply Management
Key Takeaways Explain This Topic AI
Regulation 100 raises a distribution system to at least Class 2 when booster chlorine stations operate within the distribution system.
Unattended feed sites require interlocks so the feed pump cannot dose against no flow and the source cannot deliver water without required disinfection.
Chlorine cylinders are chained upright individually, full or empty, with valve protection hoods in place, inside a locked disinfection facility.
Sodium hypochlorite degrades in storage, so inventory turnover and verifying delivered strength matter more than the volume on hand.
Field dose calculation uses the pounds formula, but the result must be confirmed by volumetric drawdown calibration and by the measured residual at the entry point.
Last updated: August 2026
The distribution operator's chemical duties
WPI's Water Quality Monitoring content area for distribution operators opens with five chemical tasks: adjust the chemical dosage , perform routine maintenance on the chemical feed equipment , transport, store, and feed chemicals (chain chlorine cylinders, storage of chemicals, lock the disinfection facility) , maintain an adequate supply of chemicals , and monitor the chemical feed equipment . A distribution operator may never set foot in a treatment plant and still be responsible for all five at a well site or a booster chlorination station.
Why chemicals are added in the distribution system
Booster chlorination re-establishes a disinfectant residual where distance, storage detention, or demand has consumed it. Regulation 100's Step 2 table raises a distribution system to at least Class 2 when booster chlorine stations exist within the distribution system, which reflects the added operational responsibility.
Chloramine boosting in chloraminated systems adds chlorine, ammonia, or both to restore the residual and correct the chlorine-to-ammonia ratio.
Corrosion control phosphate or pH adjustment fed at an entry point.
Well-site disinfection at each entry point, which for many small Colorado systems is the only treatment the system has.
Fluoridation at an entry point where the community fluoridates.
Feed equipment at remote sites
Remote chlorination sites are unattended most of the time, which changes the design priorities:
Sodium hypochlorite is the usual choice over gas at unattended sites, because a gas release at an unmanned station is unacceptable.
Flow pacing from the well or booster discharge meter keeps dose constant as flow changes; compound loop control adds a residual analyzer trim where the site warrants it.
Interlocks are essential: the feed pump must not run when the well pump is off, or the injection point will be over-dosed and the chemical will migrate. Conversely, the well must not run without disinfection where disinfection is required — a no-flow or no-feed shutdown protects the system.
Alarms telemetered to SCADA for low chemical level, feed pump failure, low residual, and building intrusion.
Heat and freeze protection. At Colorado well houses, an unheated building will freeze the chemical, the analyzer, and the sample line. Hypochlorite freezes near 20 degrees Fahrenheit at typical strengths.
Storage, transport, and security
WPI's phrasing — "chain chlorine cylinders, storage of chemicals, lock the disinfection facility" — is a checklist in itself:
Chlorine cylinders are chained upright , individually, whether full or empty, and are stored with valve protection hoods in place when not connected. Cylinders are never rolled on their sides, dropped, or lifted by the protective hood.
Ton containers are stored horizontally on trunnions or saddles with the two valves aligned vertically, and are moved only with rated lifting beams.
The disinfection facility is locked. Chemical feed rooms are attractive targets and contain material that can injure the public. This is both a security and a safety requirement, and it is one of the specific items AWIA risk and resilience assessments examine.
Secondary containment sized for the largest container, with incompatible chemicals separated. Hypochlorite and acid must never share containment.
Labeling and signage per hazard communication, with SDS available on site and NFPA or GHS placarding at entrances so responders know what is inside before they enter.
Transport of chemicals between sites in utility vehicles is subject to hazardous materials rules: proper containers, securement, placarding above threshold quantities, and a spill kit in the vehicle.
Eyewash and safety shower available where chemicals are handled, tested weekly, and protected from freezing.
Maintaining an adequate supply
"Maintain an adequate supply of chemicals" is a listed task and a real failure mode. A system that runs out of chlorine has lost its disinfection barrier and may be facing a Tier 1 public notice. Practical controls:
Track usage in pounds or gallons per million gallons treated so consumption is normalized and trended.
Set reorder points based on lead time and usage, not on how full the tank looks.
Account for degradation. Sodium hypochlorite loses strength in storage, so a large inventory of bulk bleach held through a warm summer may deliver far less chlorine than its volume suggests. Turnover matters more than volume.
Plan for winter access to remote sites; a Colorado well house at the end of an unplowed road needs its delivery scheduled before the snow, not after.
Verify what you received. Test the strength of delivered hypochlorite rather than assuming the label value, and keep certificates of analysis.
Dose adjustment in the field
The distribution operator's dose calculation is the same pounds formula used everywhere, applied at a single entry point.
Worked example. A well produces 340 gpm. The operator needs a chlorine dose of 1.4 mg/L using 12.5 percent sodium hypochlorite with a specific gravity of 1.20.
- Flow in MGD = 340 gpm x 1,440 min/day = 489,600 gpd = 0.4896 MGD
- Chlorine required = 0.4896 x 1.4 x 8.34 = 5.72 lbs/day
- Pounds of available chlorine per gallon of product = 1.20 x 8.34 x 0.125 = 1.251 lbs/gal
- Feed rate = 5.72 ÷ 1.251 = 4.57 gallons per day , or about 12.0 mL/min
The operator then verifies that number with a volumetric drawdown calibration and confirms the resulting residual at the entry point, because the calculation gives dose while the analyzer gives what the water actually received after demand.