Study guide
17.2 Fitting Workflows: K Readings, Tear Lens, and the SAM/FAP Rule
COA Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: COA Orientation and Exam Strategy
1.1 Current COA Exam Facts 1.2 Eligibility, Application, and Scheduling 1.3 Blueprint Domains and Weighting 1.4 Question Style and Score Report Thinking 1.5 Study Calendar and Practice Plan
2 Chapter 2: History and Documentation
2.1 History and Documentation Overview 2.2 Core Workflows and Decision Points 2.3 Scenario Practice for History and Documentation 2.4 Common Traps in History and Documentation 2.5 Practice Drills and Readiness Markers
3 Chapter 3: Visual Assessment
3.1 Visual Assessment Overview 3.2 Core Workflows and Decision Points 3.3 Scenario Practice for Visual Assessment 3.4 Common Traps in Visual Assessment 3.5 Practice Drills and Readiness Markers
4 Chapter 4: Visual Field Testing
4.1 Visual Field Testing Overview 4.2 Core Workflows and Decision Points 4.3 Scenario Practice for Visual Field Testing 4.4 Common Traps in Visual Field Testing 4.5 Practice Drills and Readiness Markers
5 Chapter 5: Pupil Assessment
5.1 Pupil Assessment Overview 5.2 Core Workflows and Decision Points 5.3 Scenario Practice for Pupil Assessment 5.4 Common Traps in Pupil Assessment 5.5 Practice Drills and Readiness Markers
6 Chapter 6: Tonometry
6.1 Tonometry Overview 6.2 Core Workflows and Decision Points 6.3 Scenario Practice for Tonometry 6.4 Common Traps in Tonometry 6.5 Practice Drills and Readiness Markers
7 Chapter 7: Keratometry
7.1 Keratometry Overview 7.2 Core Workflows and Decision Points 7.3 Scenario Practice for Keratometry 7.4 Common Traps in Keratometry 7.5 Practice Drills and Readiness Markers
8 Chapter 8: Lensometry
8.1 Lensometry Overview 8.2 Core Workflows and Decision Points 8.3 Scenario Practice for Lensometry 8.4 Common Traps in Lensometry 8.5 Practice Drills and Readiness Markers
9 Chapter 9: Biometry
9.1 Biometry Overview 9.2 Core Workflows and Decision Points 9.3 Scenario Practice for Biometry 9.4 Common Traps in Biometry 9.5 Practice Drills and Readiness Markers
10 Chapter 10: Diagnostic Ultrasound
10.1 Diagnostic Ultrasound Overview 10.2 Core Workflows and Decision Points 10.3 Scenario Practice for Diagnostic Ultrasound 10.4 Common Traps in Diagnostic Ultrasound 10.5 Practice Drills and Readiness Markers
11 Chapter 11: Supplemental Testing
11.1 Supplemental Testing Overview 11.2 Core Workflows and Decision Points 11.3 Scenario Practice for Supplemental Testing 11.4 Common Traps in Supplemental Testing 11.5 Practice Drills and Readiness Markers
12 Chapter 12: Microbiology
12.1 Microbiology Overview 12.2 Core Workflows and Decision Points 12.3 Scenario Practice for Microbiology 12.4 Common Traps in Microbiology 12.5 Practice Drills and Readiness Markers
13 Chapter 13: Pharmacology
13.1 Pharmacology Overview 13.2 Mydriatics, Cycloplegics, and Anesthetics 13.3 Glaucoma, Anti-Infective, and Anti-Inflammatory Agents 13.4 Stains, Instillation Technique, and Safety Traps 13.5 Practice Drills and Readiness Markers
14 Chapter 14: Surgical Assisting
14.1 Surgical Assisting Overview 14.2 Core Workflows and Decision Points 14.3 Scenario Practice for Surgical Assisting 14.4 Common Traps in Surgical Assisting 14.5 Practice Drills and Readiness Markers
15 Chapter 15: Ophthalmic Patient Services and Education
15.1 Ophthalmic Patient Services and Education Overview 15.2 Core Workflows and Decision Points 15.3 Scenario Practice for Ophthalmic Patient Services and Education 15.4 Common Traps in Ophthalmic Patient Services and Education 15.5 Practice Drills and Readiness Markers
16 Chapter 16: Optics and Spectacles
16.1 Optics and Spectacles Overview 16.2 Core Workflows and Decision Points 16.3 Scenario Practice for Optics and Spectacles 16.4 Common Traps in Optics and Spectacles 16.5 Practice Drills and Readiness Markers
17 Chapter 17: Contact Lenses
17.1 Contact Lens Types, Parameters, and Oxygen 17.2 Fitting Workflows: K Readings, Tear Lens, and the SAM/FAP Rule 17.3 Insertion, Removal, Care Systems, and Wear Schedules 17.4 Complications: Hypoxia, Infiltrates, and Corneal Ulcers 17.5 Specialty Lenses, Multifocals, and Readiness Drills
18 Chapter 18: Equipment Maintenance and Repair
18.1 Equipment Maintenance and Repair Overview 18.2 Core Workflows and Decision Points 18.3 Scenario Practice for Equipment Maintenance and Repair 18.4 Common Traps in Equipment Maintenance and Repair 18.5 Practice Drills and Readiness Markers
19 Chapter 19: Medical Ethics, Legal, and Regulatory Issues
19.1 Medical Ethics, Legal, and Regulatory Issues Overview 19.2 Core Workflows and Decision Points 19.3 Scenario Practice for Medical Ethics, Legal, and Regulatory Issues 19.4 Common Traps in Medical Ethics, Legal, and Regulatory Issues 19.5 Practice Drills and Readiness Markers
20 Chapter 20: General Medical Knowledge
20.1 General Medical Knowledge Overview 20.2 Medical Terminology, Anatomy, and Physiology 20.3 Systemic Disease with Ocular Manifestations 20.4 Pharmacology and Medical Emergencies 20.5 Microbiology, Infection Control, and Readiness Drills
21 Chapter 21: Refraction
21.1 Refraction Overview 21.2 Core Workflows and Decision Points 21.3 Scenario Practice for Refraction 21.4 Common Traps in Refraction 21.5 Practice Drills and Readiness Markers
22 Chapter 22: Ophthalmic Imaging
22.1 Ophthalmic Imaging Overview 22.2 Core Workflows and Decision Points 22.3 Scenario Practice for Ophthalmic Imaging 22.4 Common Traps in Ophthalmic Imaging 22.5 Practice Drills and Readiness Markers
23 Chapter 23: Ocular Motility Testing
23.1 Ocular Motility Testing Overview 23.2 Core Workflows and Decision Points 23.3 Scenario Practice for Ocular Motility Testing 23.4 Common Traps in Ocular Motility Testing 23.5 Practice Drills and Readiness Markers
24 Chapter 24: Final Review and Test Day
24.1 Timed Practice Strategy 24.2 Last-Week Review Map 24.3 Exam-Day Checklist 24.4 After the Exam and Next Steps
17.2 Fitting Workflows: K Readings, Tear Lens, and the SAM/FAP Rule
Key Takeaways Explain This Topic AI
Keratometry (K) readings give the corneal curvature that anchors every RGP base-curve choice.
An RGP lens forms a tear lens; its power follows SAM/FAP — Steeper Add Minus, Flatter Add Plus.
Soft lenses are fit empirically from K and diameter; RGP fits are confirmed with fluorescein patterns.
Vertex-distance conversion matters: spectacle powers above ±4.00 D must be re-calculated at the corneal plane.
Last updated: June 2026
17.2 Fitting Workflows: K Readings, Tear Lens, and the SAM/FAP Rule
A contact lens fit is a sequence: measure the cornea, pick a base curve relative to it, evaluate the physical fit, then refine power. The COA stem usually hands you a number and asks for the next correct step.
Step 1 — Keratometry (K readings)
Keratometry measures the curvature of the central anterior cornea in two principal meridians, reported in diopters or millimeters (e.g., 43.00 @ 180 / 44.00 @ 090). The difference between the two meridians is the corneal (with-the-rule or against-the-rule) astigmatism . K readings are the anchor for choosing an RGP base curve. Conversion is fixed: a steeper cornea has a higher diopter value and a smaller millimeter radius; 7.85 mm corresponds to about 43.00 D.
With-the-rule astigmatism has the steeper meridian vertical (near 90 degrees), the most common pattern in young eyes; against-the-rule has the steeper meridian horizontal and becomes more common with age. Keratometry also assesses tear-film quality — distorted or jumping mires suggest dry eye that will compromise lens comfort, a point the assistant should flag before fitting.
Step 2 — Pick the base curve relative to K
For RGP lenses the relationship of base curve to K defines the fit:
- Fit relationship Base curve vs K Fluorescein appearance
- Apical alignment ("on K") BC = K Even, thin tear film; ideal
- Apical clearance (steeper than K) BC steeper than K Central pooling (bright green center)
- Apical bearing (flatter than K) BC flatter than K Central touch (dark center, edge pooling)
A practical starting rule for spherical corneas: begin on K for low astigmatism, fit slightly steeper as corneal cylinder increases (often 0.25 D steeper for each 0.50 D of with-the-rule astigmatism), and verify with fluorescein. The goal is a centered lens that moves 1–2 mm on a blink and exchanges tears without bubbling or sealing off.
Step 3 — The tear lens and SAM/FAP
When an RGP sits on the cornea, the tear film trapped under it acts as a lens. The exam-critical rule:
SAM — Steeper Add Minus: if you fit the lens steeper than K, the tear lens has plus power, so you must add minus power to the contact lens to compensate.
FAP — Flatter Add Plus: if you fit flatter than K, the tear lens has minus power, so you add plus power.
Magnitude: roughly 0.25 D of tear-lens power for every 0.05 mm (about every 0.25 D) of base-curve change from K. Worked example: spectacle Rx is −3.00 D, K is 43.00 D, and you fit 0.50 D steeper than K. Steeper Add Minus → add −0.50 D → the contact lens power becomes about −3.50 D. A spherical RGP tear layer neutralizes the great majority of regular corneal astigmatism, which is why RGPs give crisp vision on astigmatic corneas.
Step 4 — Vertex distance
Spectacles sit ~12 mm in front of the cornea; contacts sit on it. For powers above about ±4.00 D , you must convert spectacle power to the corneal plane. Minus lenses need less minus as a contact; plus lenses need more plus. Use the formula F_cl = F_spec / (1 − d·F_spec), with d in meters (0.012 m). Below ±4.00 D the change is clinically negligible and is usually ignored.
Soft-lens workflow contrast
Soft lenses are fit empirically: choose base curve and diameter from the patient's K and corneal diameter, insert, let settle 5–10 minutes, then assess centration, movement (about 0.25–0.50 mm on blink), and coverage . Too little movement = tight (flatten the lens / increase the base-curve number). Too much movement = loose (steepen the lens / lower the base-curve number). A soft toric must also show stable rotational orientation.
Reading fluorescein patterns
For RGP fits, sodium fluorescein dye is instilled and viewed with a cobalt-blue light. The dye glows green wherever the tear film is thicker. A well-aligned (on-K) fit shows a thin, even film with slightly more pooling at the edge. Central pooling (bright green center) means the lens is too steep — apical clearance — and traps tears; central touch (a dark, non-staining center surrounded by an edge ring) means it is too flat — apical bearing — and the lens rocks on the apex. Excessive edge lift lets the lens dislodge; inadequate edge lift seals the lens and starves the cornea of tear exchange.
Note that high-water soft lenses absorb fluorescein, so the standard dye is not used to assess soft-lens fit; movement and centration are judged instead.
Trial-lens overrefraction
The most reliable way to finalize power is to put a trial lens of the chosen base curve on the eye, let it settle, then overrefract — measure the residual refractive error over the lens and add it to the lens power. This automatically accounts for tear-lens and vertex effects, which is why an experienced fitter trusts the overrefraction over a paper calculation when the two disagree.
Putting the steps together
The full RGP sequence the exam expects: take K readings → select a diagnostic base curve relative to K → insert and settle → evaluate fluorescein pattern and movement → overrefract → apply SAM/FAP and vertex logic to confirm power → order final parameters. Skipping straight to ordering from spectacle numbers without a diagnostic fit is the classic wrong workflow. If two answers seem reasonable, the better one keeps a diagnostic lens on the eye and verifies the fit physically rather than relying on calculation alone.