Study guide

14.2 Core Workflows and Decision Points

COA Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: COA Orientation and Exam Strategy

1.1 Current COA Exam Facts 1.2 Eligibility, Application, and Scheduling 1.3 Blueprint Domains and Weighting 1.4 Question Style and Score Report Thinking 1.5 Study Calendar and Practice Plan

2 Chapter 2: History and Documentation

2.1 History and Documentation Overview 2.2 Core Workflows and Decision Points 2.3 Scenario Practice for History and Documentation 2.4 Common Traps in History and Documentation 2.5 Practice Drills and Readiness Markers

3 Chapter 3: Visual Assessment

3.1 Visual Assessment Overview 3.2 Core Workflows and Decision Points 3.3 Scenario Practice for Visual Assessment 3.4 Common Traps in Visual Assessment 3.5 Practice Drills and Readiness Markers

4 Chapter 4: Visual Field Testing

4.1 Visual Field Testing Overview 4.2 Core Workflows and Decision Points 4.3 Scenario Practice for Visual Field Testing 4.4 Common Traps in Visual Field Testing 4.5 Practice Drills and Readiness Markers

5 Chapter 5: Pupil Assessment

5.1 Pupil Assessment Overview 5.2 Core Workflows and Decision Points 5.3 Scenario Practice for Pupil Assessment 5.4 Common Traps in Pupil Assessment 5.5 Practice Drills and Readiness Markers

6 Chapter 6: Tonometry

6.1 Tonometry Overview 6.2 Core Workflows and Decision Points 6.3 Scenario Practice for Tonometry 6.4 Common Traps in Tonometry 6.5 Practice Drills and Readiness Markers

7 Chapter 7: Keratometry

7.1 Keratometry Overview 7.2 Core Workflows and Decision Points 7.3 Scenario Practice for Keratometry 7.4 Common Traps in Keratometry 7.5 Practice Drills and Readiness Markers

8 Chapter 8: Lensometry

8.1 Lensometry Overview 8.2 Core Workflows and Decision Points 8.3 Scenario Practice for Lensometry 8.4 Common Traps in Lensometry 8.5 Practice Drills and Readiness Markers

9 Chapter 9: Biometry

9.1 Biometry Overview 9.2 Core Workflows and Decision Points 9.3 Scenario Practice for Biometry 9.4 Common Traps in Biometry 9.5 Practice Drills and Readiness Markers

10 Chapter 10: Diagnostic Ultrasound

10.1 Diagnostic Ultrasound Overview 10.2 Core Workflows and Decision Points 10.3 Scenario Practice for Diagnostic Ultrasound 10.4 Common Traps in Diagnostic Ultrasound 10.5 Practice Drills and Readiness Markers

11 Chapter 11: Supplemental Testing

11.1 Supplemental Testing Overview 11.2 Core Workflows and Decision Points 11.3 Scenario Practice for Supplemental Testing 11.4 Common Traps in Supplemental Testing 11.5 Practice Drills and Readiness Markers

12 Chapter 12: Microbiology

12.1 Microbiology Overview 12.2 Core Workflows and Decision Points 12.3 Scenario Practice for Microbiology 12.4 Common Traps in Microbiology 12.5 Practice Drills and Readiness Markers

13 Chapter 13: Pharmacology

13.1 Pharmacology Overview 13.2 Mydriatics, Cycloplegics, and Anesthetics 13.3 Glaucoma, Anti-Infective, and Anti-Inflammatory Agents 13.4 Stains, Instillation Technique, and Safety Traps 13.5 Practice Drills and Readiness Markers

14 Chapter 14: Surgical Assisting

14.1 Surgical Assisting Overview 14.2 Core Workflows and Decision Points 14.3 Scenario Practice for Surgical Assisting 14.4 Common Traps in Surgical Assisting 14.5 Practice Drills and Readiness Markers

15 Chapter 15: Ophthalmic Patient Services and Education

15.1 Ophthalmic Patient Services and Education Overview 15.2 Core Workflows and Decision Points 15.3 Scenario Practice for Ophthalmic Patient Services and Education 15.4 Common Traps in Ophthalmic Patient Services and Education 15.5 Practice Drills and Readiness Markers

16 Chapter 16: Optics and Spectacles

16.1 Optics and Spectacles Overview 16.2 Core Workflows and Decision Points 16.3 Scenario Practice for Optics and Spectacles 16.4 Common Traps in Optics and Spectacles 16.5 Practice Drills and Readiness Markers

17 Chapter 17: Contact Lenses

17.1 Contact Lens Types, Parameters, and Oxygen 17.2 Fitting Workflows: K Readings, Tear Lens, and the SAM/FAP Rule 17.3 Insertion, Removal, Care Systems, and Wear Schedules 17.4 Complications: Hypoxia, Infiltrates, and Corneal Ulcers 17.5 Specialty Lenses, Multifocals, and Readiness Drills

18 Chapter 18: Equipment Maintenance and Repair

18.1 Equipment Maintenance and Repair Overview 18.2 Core Workflows and Decision Points 18.3 Scenario Practice for Equipment Maintenance and Repair 18.4 Common Traps in Equipment Maintenance and Repair 18.5 Practice Drills and Readiness Markers

19 Chapter 19: Medical Ethics, Legal, and Regulatory Issues

19.1 Medical Ethics, Legal, and Regulatory Issues Overview 19.2 Core Workflows and Decision Points 19.3 Scenario Practice for Medical Ethics, Legal, and Regulatory Issues 19.4 Common Traps in Medical Ethics, Legal, and Regulatory Issues 19.5 Practice Drills and Readiness Markers

20 Chapter 20: General Medical Knowledge

20.1 General Medical Knowledge Overview 20.2 Medical Terminology, Anatomy, and Physiology 20.3 Systemic Disease with Ocular Manifestations 20.4 Pharmacology and Medical Emergencies 20.5 Microbiology, Infection Control, and Readiness Drills

21 Chapter 21: Refraction

21.1 Refraction Overview 21.2 Core Workflows and Decision Points 21.3 Scenario Practice for Refraction 21.4 Common Traps in Refraction 21.5 Practice Drills and Readiness Markers

22 Chapter 22: Ophthalmic Imaging

22.1 Ophthalmic Imaging Overview 22.2 Core Workflows and Decision Points 22.3 Scenario Practice for Ophthalmic Imaging 22.4 Common Traps in Ophthalmic Imaging 22.5 Practice Drills and Readiness Markers

23 Chapter 23: Ocular Motility Testing

23.1 Ocular Motility Testing Overview 23.2 Core Workflows and Decision Points 23.3 Scenario Practice for Ocular Motility Testing 23.4 Common Traps in Ocular Motility Testing 23.5 Practice Drills and Readiness Markers

24 Chapter 24: Final Review and Test Day

24.1 Timed Practice Strategy 24.2 Last-Week Review Map 24.3 Exam-Day Checklist 24.4 After the Exam and Next Steps

14.2 Core Workflows and Decision Points

Key Takeaways Explain This Topic AI

Sterile technique follows fixed rules: gowns are sterile front-of-shoulder to waist and sleeve cuff up; below the waist and the back are not sterile.

The surgical time-out verifies correct patient, correct procedure, and correct operative eye before incision, mirroring the WHO Surgical Safety Checklist.

Cataract instruments are reprocessed by cleaning then steam autoclave sterilization; immediate-use steam sterilization (IUSS) is for emergencies, not routine turnover.

Residual detergent, autoclave steam impurities, and BSS contamination are leading causes of TASS, so reprocessing protocol is a core safety control.

Last updated: June 2026

14.2 Core Workflows and Decision Points

Surgical assisting questions reward a candidate who knows the sequence and the rules , not just vocabulary. Four workflows carry the most exam weight.

Sterile field and the sterile boundary

The sterile field is the draped zone around the operative site plus the gowned, gloved team. Memorize the boundaries:

A sterile gown is sterile from chest (front of shoulder) to table level and from sleeve cuff to two inches above the elbow . The back, neckline, and anything below the waist are not sterile.

Once gloved, hands stay above waist and below shoulders , in view.

A 1-inch margin at the edge of any sterile drape or wrapper is considered contaminated.

If sterility is in doubt, the item is considered contaminated.

The circulating (non-sterile) assistant opens supplies onto the field without reaching over it and never touches sterile items.

The surgical time-out

Before the first incision, the team performs a time-out derived from the WHO Surgical Safety Checklist (launched 2008). All activity stops to confirm three things:

  • Verify In ophthalmology
  • Correct patient Two identifiers (name + DOB)
  • Correct procedure e.g., phaco with IOL
  • Correct site Which eye — OD (right) vs OS (left)

Wrong-eye surgery is a never event ; the operative eye is marked and confirmed against the consent and IOL calculation sheet.

Instrument reprocessing and sterilization

Routine flow: point-of-use treatment → cleaning (manual/ultrasonic + enzymatic detergent) → thorough rinsing → inspection → steam autoclave sterilization → sterile storage. Per AAO/ASCRS guidance, instruments must be cleaned and rinsed well because residual detergent is a documented TASS cause. Steam autoclaving at standard cycles is the routine method.

Immediate-use steam sterilization (IUSS) , the term that replaced "flash sterilization" (CMS, 2014), is reserved for emergencies — a dropped non-replaceable instrument, or an urgently needed item — not routine same-day turnover. Short-cycle steam sterilization between sequential cataract cases is an accepted same-day practice when validated.

The cataract case sequence

A simplified order the exam expects: prep and drape → time-out → speculum and incision → viscoelastic → capsulorhexis → phaco of nucleus → cortex aspiration → IOL insertion → viscoelastic removal → wound check → shield. The assistant anticipates the next instrument in this order.

Skin prep and draping

Before draping, the periocular skin and lashes are prepped, most commonly with povidone-iodine (typically 5-10% on the skin and a diluted solution in the conjunctival sac). Povidone-iodine antisepsis of the ocular surface is the single most evidence-supported step for preventing endophthalmitis , so the exam treats skipping or substituting it as a serious error. The prep is applied from the center of the operative site outward in expanding strokes, and the solution is allowed adequate contact time. The eye is then isolated with a sterile drape, and a plastic incise drape sequesters the lashes and lid margin out of the surgical field.

Instrument anticipation and counts

A strong scrub assistant watches the case, not the tray, and hands the next instrument before it is requested — keratome for the incision, cystotome or forceps for the capsulorhexis, the phaco handpiece for nucleus removal, the irrigation/aspiration tip for cortex, and the IOL injector for lens insertion. Sharps and small items such as blades and cannulas are accounted for; a dropped cannula or a missing blade tip is a patient-safety issue. The circulator documents the IOL model and power, lot numbers of implants, and the operative eye, building the audit trail the case depends on.

Decision points the exam favors

At each handoff there is a control: confirm the operative eye matches the IOL before lens insertion, confirm sterility before passing any item, and confirm the phaco and irrigation lines are primed with BSS before activation. When a stem describes a missing, contaminated, or mismatched element at one of these points, the defensible action pauses the workflow and corrects the root issue rather than working around it.

Anesthesia and akinesia

Most cataract cases use topical anesthesia (proparacaine or tetracaine drops) sometimes supplemented with intracameral lidocaine, leaving the patient awake but comfortable. Some cases use a regional block — peribulbar or retrobulbar injection — which provides both anesthesia and akinesia (paralysis of eye movement). The assistant should understand that with a block the eye is still, whereas under topical anesthesia the patient retains some eye movement and must cooperate by fixating.

Knowing this distinction explains several intraoperative scenarios: a topical patient who looks away needs verbal redirection, not sedation, while a blocked eye should not move. Anesthesia depth and any sedation are managed by the anesthesia provider, not the assistant.

Hemostasis, fluids, and equipment readiness

Intraocular surgery is low-bleeding, but the assistant ensures the phacoemulsification machine is set up correctly: balanced salt solution bottle hung at the prescribed height for proper irrigation inflow, tubing primed and free of air, foot-pedal functions confirmed, and the handpiece tested. An air bubble or empty BSS bottle mid-case can collapse the anterior chamber, so checking fluid levels is a real assistant responsibility. The circulator keeps a spare BSS bottle ready and monitors the level throughout.

The handback to recovery

The workflow does not end at the last suture or wound check. The assistant applies a protective shield, helps transfer the patient safely, and ensures the operative record, IOL card, and postoperative orders move with the patient to recovery. A clean handoff — communicating which eye, what was done, and what to watch for — closes the intraoperative loop and feeds the postoperative phase. Treat the entire arc from prep to handoff as one connected workflow, because the exam often tests the transition points where errors slip through.