Study guide

Display & Mobile Device Troubleshooting

CompTIA A+ 220-1201 & 220-1202

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the CompTIA A+ Certification Exam Domains & Study Strategy

2 Core 1 Domain 1: Mobile Devices (13%)

Laptop Hardware & Components Laptop Features & Display Types Mobile Device Connectivity & Accessories Mobile Operating System Features Mobile Device Synchronization & Data Transfer

3 Core 1 Domain 2: Networking (23%)

TCP/IP Fundamentals & the OSI Model Common Ports & Protocols Wireless Networking Standards Network Hardware & Devices Network Configuration & Internet Connections Network Types & Topologies

4 Core 1 Domain 3: Hardware (25%)

Cables & Connectors RAM Types & Storage Devices Motherboards, CPUs & Power Supplies Printers & Multifunction Devices Peripheral Devices & Expansion Cards Network Cable Tools & Testing

5 Core 1 Domain 4: Virtualization & Cloud Computing (11%)

Virtualization Concepts Cloud Computing Models & Services Client-Side Virtualization in Practice

6 Core 1 Domain 5: Hardware & Network Troubleshooting (28%)

CompTIA Troubleshooting Methodology Hardware Troubleshooting Network Troubleshooting Printer Troubleshooting Display & Mobile Device Troubleshooting

7 Core 2 Domain 1: Operating Systems (28%)

Windows Editions & Features Windows Administrative Tools & Utilities Windows Command Line & PowerShell macOS & Linux Basics Windows Networking & File Sharing Windows Installation & Upgrade Methods

8 Core 2 Domain 2: Security (28%)

Physical & Logical Security Measures Malware Types & Threat Mitigation Wireless & Network Security Encryption & Data Protection

9 Core 2 Domain 3: Software Troubleshooting (23%)

Windows OS Troubleshooting Mobile OS & Application Troubleshooting Browser & Application Troubleshooting

10 Core 2 Domain 4: Operational Procedures (21%)

Documentation & Change Management Backup & Recovery Methods Safety & Environmental Procedures Scripting & Remote Access Technologies Privacy, Licensing & Organizational Policies

Display & Mobile Device Troubleshooting

Key Takeaways Explain This Topic AI

If a laptop shows on an external monitor but the built-in panel is dark, the GPU is fine — suspect the backlight, ribbon/eDP cable, or LCD panel.

Win+P cycles laptop display modes (PC screen only, Duplicate, Extend, Second screen only); a blank built-in screen can simply be set to 'Second screen only'.

Artifacts (random colored blocks, garbled textures) point to GPU overheating or driver corruption — check temps and reinstall the driver before replacing hardware.

Mobile issues map to specific parts: ghost/no touch = digitizer; dim/black = backlight or ambient sensor; OLED burn-in from static images; swollen battery is a safety hazard.

For a liquid-damaged device, power off immediately and do not charge; dry 48-72 hours with desiccant — never rice and never a heat source.

Last updated: October 2026

Desktop & Laptop Display Issues (Objective 5.3)

Work from the cheapest, most likely cause outward: input source, then cable, then driver, then the panel/GPU. The key isolation trick on laptops is the external monitor test — it splits "is the GPU dead?" from "is the built-in screen dead?"

Symptom Likely Causes Solutions

No display at all Wrong input, bad cable, GPU unseated, monitor off Select correct input, swap cable, reseat GPU, test second monitor

Dim display (laptop) Brightness/Fn key, power plan, failing backlight Raise brightness, change plan, replace backlight/panel

Flickering Bad cable, driver, refresh-rate mismatch Update driver, reseat cable, set correct refresh rate

Artifacts (colored blocks) GPU overheating or driver corruption Check GPU temps, reinstall driver, test integrated graphics

  • Wrong resolution Missing GPU driver Install driver, set native resolution
  • Dead pixels Manufacturing defect Warranty replacement; not repairable

Lines on screen (laptop) Loose ribbon/eDP cable , failing panel Reseat ribbon, test external monitor, replace panel

  • OLED burn-in Static image left too long Screensaver, lower brightness, pixel-shift content
  • Projector no image Wrong input, burnt lamp , lens cap Check input, replace lamp, remove cap/focus
  • Multi-Monitor Quick Fixes

Win+P toggles PC screen only / Duplicate / Extend / Second screen only — a "dead" laptop screen is often just set to Second screen only .

Second monitor not detected: check the cable, try another port, update the GPU driver, then Detect in Display Settings.

Wrong arrangement or cursor crossing the wrong edge: drag the monitor icons in Display Settings to match the physical layout; set each display's resolution individually.

Mobile Device Troubleshooting (Objective 5.4)

Symptom Likely Part / Cause Action

Ghost touch / phantom input Digitizer fault, moisture, bad protector Remove protector, clean/dry, replace digitizer

  • No touch response Digitizer or software hang Force restart, remove case, recalibrate
  • Dim/black screen Backlight or ambient-light sensor Adjust brightness, clean sensor, replace backlight
  • Cracked glass Impact Replace screen assembly (professional)
  • Poor/no charging Lint in port, bad cable, worn battery Clean port, swap cable, test battery health

Overheating / rapid drain Runaway app, swollen battery Close apps; a swollen battery is a hazard — stop charging and replace

  • No GPS lock Location off, indoors Enable location, move outside, update OS
  • Slow performance Low storage, stale OS Free space, close apps, update/reset

Safety: A swollen or bulging battery can rupture or ignite. Do not puncture or keep charging it — power down, isolate, and replace using proper handling/recycling.

Liquid Damage Procedure

Power off immediately — do not charge or power on.

Remove the case, SIM tray, and any removable parts.

Gently shake out excess water.

Dry with silica-gel/desiccant packets — never rice , which sheds dust into ports.

Allow 48-72 hours of drying before any power-on attempt.

If it won't recover, escalate to board-level repair.

Critical: Never use a hair dryer or other heat source — heat warps components and melts adhesives, worsening the damage.

Isolating Display Faults Methodically

The single most useful display test on a laptop is connecting an external monitor . If the external screen shows a perfect image while the built-in panel stays dark, the GPU, RAM, and OS are all proven healthy and the fault lives in the internal display path — backlight, eDP/ribbon cable , or LCD/OLED panel. Conversely, if both screens show artifacts or nothing, suspect the GPU, its driver, or system memory. On a desktop, the equivalent test is moving the cable to the integrated graphics port: working video there isolates a failing discrete card.

Distinguish a backlight failure from a panel failure on a dim laptop screen by shining a flashlight at an angle across the display while it is powered on. If you can faintly make out the desktop image, the panel and signal are fine and only the backlight (or its driver/cable) has failed; if there is no image at all even under the light, the panel or video signal is dead. This quick check saves replacing the wrong part.

Mobile Symptom-to-Part Mapping

Mobile devices integrate the display, digitizer (touch layer) , battery, and sensors into one tight assembly, so symptoms map cleanly to parts once you know the layout:

Touch is erratic or registers phantom taps → the digitizer is failing or there is moisture/a damaged screen protector between finger and glass.

Image is fine but touch is fully dead → the digitizer or its connector, since the display and touch layers can fail independently.

Screen auto-dims at the wrong times → a dirty or faulty ambient-light sensor driving auto-brightness.

Device runs hot and drains fast → a runaway background app first; a swollen battery is a safety escalation.

No charge → lint-clogged port, a damaged cable, or a worn battery; clean the port and test a known-good cable before condemning the battery.

Because mobile assemblies are glued and fragile, many of these fixes — cracked glass, a dead digitizer, a swollen battery — are board-level or assembly replacements done with proper tools, and several (especially battery work) carry real safety risk. Knowing when to escalate to professional repair instead of prying open a sealed device is itself a tested judgment in Domain 5.