Study guide

Exam-Day Time Management and PBQ Order

CompTIA Network+ N10-009

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

Current Exam Facts and Applied Networking Judgment Official Domain Weights and an 8-12 Week Study Plan How to Use Labs, Practice, and PBQ Workflow Missed-Question Notebook and Final Readiness Metrics

2 Domain 1: Networking Concepts (23%)

OSI and TCP/IP Models with Device and Protocol Mapping Networking Appliances and Where They Operate Ports and Protocol Decision Table Traffic Types and Encapsulation Flow

3 Domain 1: Media, Connectors, Transceivers, and Network Architectures

Copper, Fiber, Coax, and DAC Media Connector and Transceiver Selection Network Topologies and Design Patterns Cloud and Virtual Networking Concepts

4 Domain 1: IP Addressing and Subnetting Mastery

IPv4 Classes, Private/Public, APIPA, and Loopback CIDR, VLSM, and Subnet Math IPv6 Address Types and Notation Routing Basics and Longest Prefix Match

5 Domain 2: Network Implementation - Routing

Static vs Dynamic Routing and Route Selection OSPF, EIGRP, and BGP Basics at Network+ Depth NAT/PAT, VIP/FHRP, and Subinterfaces Routing PBQs and Troubleshooting Route Table Clues

6 Domain 2: Network Implementation - Switching

VLANs, Access Ports, Trunks, and Native VLAN STP/RSTP Loop Prevention and Bridge Roles Port Aggregation/LACP, MTU, Jumbo Frames, and Interface Settings Switch Implementation PBQs and Common Misconfigurations

7 Domain 2: Network Implementation - Wireless and Physical Implementation

Wi-Fi Standards, Bands, and Channels SSID Security, Guest Networks, and Authentication Antennas, Coverage, Roaming, Interference, and Site Surveys Physical Installation Implications

8 Domain 2: Network Implementation - Services Implementation

DNS Record Types and Troubleshooting Cues DHCP, DHCPv6, SLAAC, Scopes, Leases, and Relay NTP, PTP, NTS, and Time-Sensitive Networking Service Implementation PBQs: DNS, DHCP, VLANs, and Firewall Direction

9 Domain 3 Part A: Network Operations Documentation and Governance

Physical, Logical, Rack, Cable, Wireless Diagrams, and IPAM Asset Inventory, Baselines, SLAs, SOPs, and Runbooks Change Management and Request Tracking Lifecycle, EOL, EOS, Decommissioning, and Configuration Management

10 Domain 3 Part B: Monitoring, Remote Access, and Resilience

SNMP, Flow, Syslog, Packet Capture, Log Aggregation, APIs, and Port Mirroring Baselines and Performance Metrics Remote Access, Management Paths, and Secure Admin Habits DR and HA Concepts: RPO, RTO, MTTR, MTBF, Sites, Failover, and Testing

11 Domain 4: Logical Security and Secure Access (14%)

Encryption in Transit, Encryption at Rest, PKI, and Certificates IAM, MFA, SSO, Directory Services, and AAA Authorization, Least Privilege, RBAC, Geofencing, and Time-Based Access VPNs and Secure Management Design

12 Domain 4: Segmentation, Risk, and Network Attacks (14%)

Segmentation for Guest, BYOD, IoT, IIoT, SCADA, ICS, and OT Risk, Compliance, Audit, Data Locality, PCI, and GDPR Network Attacks and Scenario Cues Attack-to-Mitigation PBQ Tables

13 Domain 4: Security Controls and Hardening (14%)

Firewalls, IDS, IPS, Security Zones, and Screened Subnets ACLs, Filtering, NAC, Hardening, and Key Management Deception Technologies and Physical Security Zero Trust, SASE, and Trusted or Untrusted Zone Decisions

14 Domain 5: Troubleshooting Methodology and Tools (24%)

Official Troubleshooting Methodology and Evidence Handling Command-Line Tools: ping, traceroute, nslookup, dig, ipconfig, ifconfig, ip, arp, netstat, ss, and route Packet, Protocol, and Wi-Fi Analyzers Choosing the Right Tool by Symptom PBQs

15 Domain 5: Physical, Interface, and Wireless Troubleshooting (24%)

Cable Issues: Type, Attenuation, Crosstalk, Termination, and TX/RX Interface Issues: Errors, Discards, Duplex, Speed, Port Status, and PoE Transceiver, Fiber, and Signal Strength Troubleshooting Wireless Troubleshooting: Interference, Channels, Roaming, RSSI/SNR, Security, and Captive Portals

16 Domain 5: Network Services, Switching, Routing, and Performance Troubleshooting (24%)

DHCP, DNS, NTP, and IP Addressing Issues VLAN, STP, Trunk, Native VLAN, and ACL Issues Routing, Default Gateway, Route Table, and NAT Issues Congestion, Latency, Jitter, Packet Loss, and Application Performance Clues

17 Performance-Based Question Labs

Subnetting and VLSM Design Lab VLAN, Trunk, Router-on-a-Stick, and Firewall Rule Lab Wireless Deployment and Troubleshooting Lab Monitoring, Log Triage, and Route or Service Troubleshooting Lab

18 High-Yield Reference and Final Study Plan

High-Yield Ports and Protocols Table Wi-Fi, Cabling, Connectors, and Transceivers Quick Table Acronyms and Command-Line Tool Quick Table Final 7-Day Review Plan and Readiness Checklist

19 Final Synthesis: Strategy, Remediation, and Readiness

Mixed-Set Decision Strategy for Qualifiers and Close Answers Missed-Question Remediation Notebook by Error Type Exam-Day Time Management and PBQ Order 100-Question Readiness Simulation Blueprint Mapped to N10-009 Weights

Exam-Day Time Management and PBQ Order

Key Takeaways Explain This Topic AI

The 90-minute limit demands active pacing; never let one PBQ consume the time needed for many easier points.

Triage PBQs up front: complete familiar ones, capture partial work on long ones, and defer confusing ones.

Answer multiple-choice with a one-pass, flag, and return strategy rather than perfecting items in order.

Final review should prioritize flagged questions with real evidence gaps, not items already answered confidently.

Build compact scratch notes: a subnetting grid, domain weights, timing checkpoints, and personal weak areas.

Last updated: June 2026

Exam-Day Timing and PBQ Order

Network+ N10-009 gives you 90 minutes for up to 90 questions , and because it mixes multiple-choice with performance-based questions (PBQs) , time pressure is uneven. A simple multiple-choice item can take 20 seconds; a multi-step PBQ can take several minutes. Your pacing plan must protect the entire exam, not just the first hard task. PBQs typically appear near the start, which is exactly when an unprepared candidate sinks 12 minutes into one drag-and-drop and then races the clock through 60 answerable questions.

The 90-Minute Budget

Treat these as checkpoints, not rigid rules:

  • Time remaining Target status
  • 90 minutes Read instructions, stay calm, begin PBQ triage
  • 80 minutes PBQs completed, partially answered, or flagged
  • 55 minutes Roughly one-third to one-half of multiple-choice done
  • 30 minutes Most multiple-choice done; flagged list controlled
  • 15 minutes Final pass on flagged PBQs and high-value uncertain items
  • 5 minutes Submit only after confirming nothing is blank

If you fall well behind a checkpoint, stop perfecting one item and move to the next answerable one. The exam rewards finishing far more than it rewards polishing a single hard PBQ.

PBQ Triage

Give every PBQ a quick triage decision on first read:

  • PBQ type Action
  • Familiar and mechanical Complete now, verify, move on
  • Long but understandable Complete the obvious parts, flag, return later
  • Confusing after one careful read Flag and move on immediately
  • Requires calculation Do the setup if quick; otherwise mark and return
  • Has many objects Identify the required end state before dragging or configuring

Partial progress can score. If a PBQ asks for five configurations and you are sure of three, set the three, flag the item, and return. Avoid random broad changes; a PBQ tests whether you can reach the requested end state, not whether you can touch every field on screen.

Multiple-Choice Flow

Use a three-pass method:

First pass: answer every item you can solve confidently in under a minute.

Second pass: return to flagged items where one or two choices remain plausible.

Final pass: check unanswered items, math questions, and PBQs with incomplete work.

Flagging only helps if you are selective. Flag items where a second look could change the outcome: subnet math, close qualifiers, route-table comparisons, wireless design, and methodology-sequence questions. If you flag half the exam, the final pass becomes noise and the strategy collapses.

Time Traps

  • Trap Better behavior
  • Recalculating the same subnet three times Write one clean block-size line and move on
  • Re-reading a confusing PBQ repeatedly Flag it and harvest easier points
  • Changing confident answers with no new evidence Leave them unless you found a specific misread
  • Treating every acronym as pure recall Reconnect it to its scenario function
  • Overbuilding a firewall or ACL answer Match source, destination, direction, protocol, port
  • Scratch Notes to Build Before You Start

Use the provided scratch space for high-value items only:

  • Note Why it helps
  • Domain weights 23 / 20 / 19 / 14 / 24 Keeps a sense of where points cluster
  • CIDR anchors /24 /25 /26 /27 /28 /29 /30 with block sizes 256/128/64/32/16/8/4 Speeds subnet math
  • Seven-step troubleshooting flow Prevents process-order errors
  • Personal weak ports Keeps known misses visible
  • PBQ rule: task, scope, baseline, apply, verify A repeatable approach

Do not spend several minutes dumping every port number from memory before you have seen a single question. Write only the handful of items you personally fumble under pressure; the rest you will recall in context.

PBQ Verification Checklist

Before you leave any PBQ, confirm:

Did I satisfy the exact requested end state?

Did I configure the correct source and destination?

Did I choose the secure protocol when the prompt required security?

Did I avoid exposing management services directly to untrusted networks?

Did I use the correct VLAN, subnet, route, SSID, or policy object?

Did I leave any required object unconfigured?

Final Review Rules

Spend the last minutes deliberately. First, make sure every question has an answer; an unanswered item is a guaranteed zero, while a guess on a four-option item is roughly 25%. Second, revisit PBQs with incomplete known work. Third, revisit flagged items where a qualifier such as "first" or "least disruptive" may have been misread. Fourth, resist changing answers only because they feel too simple; simple is fine when the evidence is simple.

Exam-day success is pacing, evidence discipline, and recovery from uncertainty as much as it is knowledge. You do not need every question to feel comfortable. You need a process that keeps you moving and prevents one hard PBQ from stealing time from many answerable items.