Study guide

5.6 Evaluating Chemical Handling, SDS, & Hazardous Materials Storage

NEHA CP-FS Certified Professional - Food Safety Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Overview

1.1 CP-FS Exam Format, Scoring, Eligibility & Renewal 1.2 The Official Seven-Area Blueprint & Your Study Plan

2 Chapter 2: Foundations — Food Safety Hazards & Risk Factors

2.1 The Five CDC Risk Factors, Contamination Sources & Active Managerial Control 2.2 Foodborne Pathogens: Bacteria & Bacterial Toxins 2.3 Foodborne Pathogens: Viruses, Parasites, & Fungi 2.4 Microbial Growth Dynamics (FAT TOM, pH, Aw, Temperature) 2.5 Chemical, Physical, & Allergen Contaminants

3 Chapter 3: Developing Food Safety Policies, Procedures & Programs (Area A)

3.1 Prerequisite Programs (GMPs, SOPs, SSOPs, & GRPs) 3.2 Developing Allergen Control Procedures 3.3 Employee Health, Hygiene Policies, & Exclusion/Restriction 3.4 Developing an Integrated Pest Management (IPM) Plan 3.5 Cleaning vs. Sanitizing: Chemical Sanitizers & Thermal Methods 3.6 Transportation & Receiving Procedures 3.7 Food Preparation Policies & Determining When a Variance Is Required

4 Chapter 4: HACCP Plans, Training & Root Cause Analysis (Area A)

4.1 HACCP Principles 1 to 3: Hazard Analysis, CCPs, & Critical Limits 4.2 HACCP Principles 4 to 7: Monitoring, Corrective Actions, Verification, & Recordkeeping 4.3 FSMA Preventive Controls & HARPC vs. Traditional HACCP 4.4 Establishing, Administering & Documenting Employee Training 4.5 Root Cause Analysis, Corrective Action Plans, & Continuous Improvement

5 Chapter 5: Assessing Food Safety I — Preparing For & Conducting the Assessment (Area B)

5.1 Preparing for an Inspection: Equipment, Calibration, Scheduling & Compliance History 5.2 Risk Categories & Determining Assessment Frequency 5.3 Menu Review, Approved Sources & Food Labeling 5.4 FDA Food Code: Time/Temperature Control for Safety (TCS) Foods 5.5 Managing the Flow of Food & Assessing Cross-Contamination 5.6 Evaluating Chemical Handling, SDS, & Hazardous Materials Storage 5.7 Evaluating Waste Management, Refuse, & Recyclables Handling

6 Chapter 6: Assessing Food Safety II — Special Processes, Findings & Follow-Up (Area B)

6.1 Recognizing Special Processes & Specialized Equipment 6.2 Interpreting Test Results: pH, Water Activity, Shelf Stability & Dairy Sampling 6.3 Evaluating HACCP Plans & Administrative Documentation 6.4 Master Cleaning Schedules & Environmental Monitoring Programs 6.5 Assessing Pest Control Practices & Employee Behaviors 6.6 Documenting Findings, Corrective Action Plans & Risk Control Plans 6.7 Communicating with the PIC, Educating Staff, & Enforcement Actions

7 Chapter 7: Reviewing Establishment Plans (Area C)

7.1 U.S. Food Regulatory Structure & Researching Local Laws 7.2 Plan Review Submissions: Licenses, Permits & Variances 7.3 Site Plans, Menu-to-Site Fit & Hygienic Facility Layout 7.4 Physical Facility: Walls, Floors, Ceilings, Lighting & Ventilation 7.5 Plumbing, Cross-Connections, Backflow Prevention, & Water Supply 7.6 Hot Water Demand, Warewashing, Handwashing & Restroom Needs 7.7 Equipment Certification (NSF/ANSI), Storage Needs, & Pre-Opening Verification

8 Chapter 8: Investigating Foodborne Illness (Area D)

8.1 Principles of Foodborne Epidemiology & Outbreak Detection 8.2 Complaint Intake, Agency Notification & Stakeholder Communication 8.3 Case Definitions, Case Interviews, & the 72-Hour Food History 8.4 Facility Investigation, Environmental Assessment, & Sample Collection 8.5 Employee Impacts, Exclusion & Holding Food for Disposition 8.6 Traceback Methodology, Crisis Communication & Illness Reports

9 Chapter 9: Performing Recall Activities (Area E)

9.1 Recall Classification, Implicated Products & Regulatory Submissions 9.2 Traceability Procedures, Mock Recalls & Staff Training 9.3 Recall Communication, Effectiveness Checks & Product Disposition

10 Chapter 10: Managing Food Defense Practices (Area F)

10.1 Food Defense Planning (ALERT & CARVER+Shock Models) 10.2 Vulnerability Assessments, Tamper-Evident Packaging, & Supply Chain Security 10.3 Enforcement Protocols, Training, Drills & Post-Event Analysis

11 Chapter 11: Responding to Emergencies (Area G)

11.1 Imminent Health Hazards: Power Outages, Water Interruptions, & Fires 11.2 The Response Team, Segregating Food & Regulatory Notification 11.3 Recovery Plans, Infrastructure Assessment & Reopening Verification

5.6 Evaluating Chemical Handling, SDS, & Hazardous Materials Storage

Key Takeaways Explain This Topic AI

OSHA's Hazard Communication Standard (29 CFR 1910.1200) aligns with GHS standards, mandating employee Right-to-Know chemical hazard training.

Safety Data Sheets (SDS) feature a standardized 16-section format and must be accessible to employees 24/7 during all work shifts without barriers.

Secondary containers (spray bottles, buckets) MUST be labeled with chemical names and GHS hazard warnings unless under the immediate, exclusive use of the person transferring it during that shift.

Toxic chemicals MUST be stored in dedicated locked cabinets separated from food and ALWAYS stored BELOW food, food preparation surfaces, and clean utensils.

Emergency eyewash stations must deliver a 15-minute continuous flush of tepid water (60–100°F) at 0.4 gpm where corrosive chemicals are handled.

Last updated: August 2026

5.6 Evaluating Chemical Handling, SDS, & Hazardous Materials Storage

Regulatory Overview: Commercial food establishments utilize a wide array of hazardous chemicals, including caustic alkaline detergents, acid descalers, chlorine bleach, quaternary ammonium sanitizers, and floor degreasers. Proper chemical hazard communication, labeling, storage, and emergency response procedures are enforced under OSHA Hazard Communication Standards (29 CFR 1910.1200) and the FDA Food Code .

OSHA Hazard Communication Standard & GHS Alignment

The OSHA Hazard Communication Standard (HCS) —commonly known as the employee "Right-to-Know" law —requires employers to inform food workers about chemical hazards present in their workplace and train them on safe handling procedures.

Alignment with the Globally Harmonized System (GHS)

In 2012, OSHA aligned the HCS with the United Nations' Globally Harmonized System of Classification and Labelling of Chemicals (GHS) . This alignment created standardized criteria for chemical hazard classification and uniform communication elements:

Standardized Hazard Classification: Chemicals are evaluated for physical hazards (flammability, corrosivity, reactivity) and health hazards (acute toxicity, skin corrosion, eye damage, carcinogenicity).

GHS Pictograms: Nine standardized red-bordered diamond symbols depicting specific hazard classes (e.g., Corrosion for acids/caustics, Flame for solvents, Exclamation Mark for irritants, Skull and Crossbones for acute toxicity).

Signal Words: Standardized alert words indicating hazard severity:

DANGER: Used for severe, high-risk hazard categories (e.g., concentrated nitric acid descaler).

WARNING: Used for less severe hazard categories (e.g., diluted sanitizer solutions).

Hazard & Precautionary Statements: Standardized phrases describing the nature of the hazard and recommended preventative measures.

Safety Data Sheets (SDS): Structure & Mandatory Access

Formerly referred to as Material Safety Data Sheets (MSDS), the Safety Data Sheet (SDS) is a comprehensive technical document provided by chemical manufacturers detailing the hazards, physical properties, handling safety, and emergency protocols for a chemical product.

The Standardized 16-Section SDS Format

Under GHS regulations, every SDS must follow an exact 16-section standardized format in sequential order: THE 16-SECTION SDS COMPLIANCE BLUEPRINT

  • ┌─────────────────────────────────────────┬─────────────────────────────────────────┐
  • │ SDS Section & Title │ Key Operational Information Content │
  • ├─────────────────────────────────────────┼─────────────────────────────────────────┤
  • │ Section 1: Identification │ Product name, mfr contact, emergency no.│
  • │ Section 2: Hazard(s) Identification │ GHS pictograms, signal words, hazards │
  • │ Section 3: Composition / Ingredients │ Chemical ingredients, CAS numbers │
  • │ Section 4: First-Aid Measures │ Emergency exposure response by route │
  • │ Section 5: Fire-Fighting Measures │ Extinguishing media, protective gear │
  • │ Section 6: Accidental Release Measures │ Spill containment & cleanup protocols │
  • │ Section 7: Handling & Storage │ Safe storage conditions & incompatibilities│
  • │ Section 8: Exposure Controls / PPE │ OSHA PELs, mandatory gloves/goggles │
  • │ Section 9: Physical & Chemical Prop. │ pH, boiling point, flash point, odor │
  • │ Section 10: Stability & Reactivity │ Incompatible chemicals (e.g. Bleach+Acid)│
  • │ Section 11: Toxicological Information │ Routes of exposure, toxicity symptoms │
  • │ Sections 12–15: Ecological & Regulatory │ Environmental, disposal, transport info │
  • │ Section 16: Other Information │ Revision date, author notes │
  • └─────────────────────────────────────────┴─────────────────────────────────────────┘

Key SDS Sections for Food Safety Auditors:

Section 4 (First-Aid): Critical during accidental chemical splashes, eye contact, or ingestion.

Section 8 (Exposure Controls/PPE): Specifies mandatory personal protective equipment (gloves, eye protection).

Section 9 (Physical/Chemical Properties): Lists pH values (critical for sanitizer efficacy checks).

Section 10 (Stability/Reactivity): Warns against dangerous chemical mixtures (e.g., mixing chlorine bleach with acid descalers produces toxic chlorine gas).

Mandatory Employee Accessibility Standards

24/7 Unrestricted Access: SDS sheets for every chemical utilized in the facility must be immediately accessible to all employees during all work shifts without requiring manager permission or passing through locked doors.

Format Flexibility: Facilities may utilize physical binders (organized alphabetically in yellow/black SDS binders) or electronic database systems. If using electronic access, systems must have battery backup power and cannot be dependent on internet access or password-protected manager accounts.

Secondary Container Labeling Rules

When commercial chemicals are purchased in bulk containers (e.g., 5-gallon carboys of detergent) and transferred into working secondary containers (e.g., spray bottles, dip buckets, squeeze bottles), strict labeling rules apply. SECONDARY CONTAINER LABELING DECISION TREE

  • ┌─────────────────────────────────────────────────────────────────────────┐
  • │ Is chemical transferred into a working secondary container (e.g. spray)? │
  • └────────────────────────────────────┬────────────────────────────────────┘
  • │
  • ▼
  • ┌─────────────────────────────────────────────────────────────────────────┐
  • │ Is the chemical used IMMEDIATELY and ENTIRELY by the single individual │
  • │ who transferred it during that single work shift? │
  • └──────────────────┬──────────────────────────────────┬───────────────────┘
  • │ YES │ NO
  • ▼ ▼
  • ┌──────────────────────────────────────┐ ┌────────────────────────────────┐
  • │ ✅ EXEMPT FROM LABELING │ │ ❌ MANDATORY SECONDARY LABEL │
  • │ (Immediate Use Exception Applies) │ │ Must include: │
  • │ │ │ 1. Chemical Common Name │
  • │ *If left unattended or shift ends, │ │ 2. Hazard Warnings / GHS Pict │
  • │ label MUST be applied immediately! │ │ 3. Signal Word (Danger/Warning)│
  • └──────────────────────────────────────┘ └────────────────────────────────┘
  • Mandatory Label Elements

Unless exempt under the Immediate Use Exception, every secondary container MUST display a legible label indicating:

Chemical Name: The common trade name or chemical name matching the master SDS (e.g., Quaternary Sanitizer 200 PPM , Heavy-Duty Degreaser ).

Hazard Warnings: Specific physical and health hazard warnings, including GHS pictograms, target organ warnings, and signal words ( DANGER / WARNING ).

The "Immediate Use" Exception

Secondary container labeling is NOT legally required ONLY IF all three of the following conditions are met simultaneously:

  • The chemical is transferred into the secondary container by an individual worker, AND
  • It remains under the exclusive personal control of that specific worker at all times, AND

It is completely used up or emptied during that single work shift.

Violation Scenario: An employee fills an unlabeled spray bottle with glass cleaner at 8:00 AM, uses half of it, and leaves the bottle sitting on a prep table when going on break or finishing their shift. This constitutes an immediate OSHA and FDA Food Code labeling violation.

Storage Rules for Toxic & Hazardous Materials

To prevent catastrophic chemical contamination of food products, the FDA Food Code mandates strict separation and storage protocols for poisonous and toxic materials.

Mandatory Storage Requirements

Dedicated Storage Area: All chemical agents (cleaners, sanitizers, descalers, lubricants, pesticides, boiler additives) must be stored in a dedicated, locked chemical storage cabinet or utility room away from food handling.

Physical Separation: Chemicals must be physically separated from food, food-preparation equipment, clean utensils, tableware, linens, and single-service items.

Vertical Storage Hierarchy (The "BELOW" Rule): Toxic materials MUST ALWAYS be stored BELOW food, food-contact surfaces, clean utensils, and packaging supplies. Storing chemicals on shelves above food or food-contact equipment creates severe risks of chemical drips, leaks, or bottle ruptures. VERTICAL CHEMICAL STORAGE HIERARCHY

  • ┌─────────────────────────────────────────────────────────────────────────┐
  • │ TOP SHELVES: [🍱 Packaged Food] [🍽️ Clean Plates] [🥤 Paper Cups]│
  • ├─────────────────────────────────────────────────────────────────────────┤
  • │ MIDDLE SHELVES: [🥩 Sealed Raw Meats / Ingredients] │
  • ├─────────────────────────────────────────────────────────────────────────┤
  • │ BOTTOM SHELVES: [🧪 Bleach / Quat] [🧴 Degreasers] [🪣 Acid Descalers]│
  • │ (FLOOR CABINET) ▲ ALWAYS STORE CHEMICALS BELOW FOOD & UTENSILS! ▲ │
  • └─────────────────────────────────────────────────────────────────────────┘
  • Personal Protective Equipment (PPE) & Chemical Dilution

Handling concentrated chemicals presents severe risks of chemical burns, blindness, respiratory damage, and toxic absorption.

Mandatory PPE Selection

Employers must provide appropriate Personal Protective Equipment (PPE) based on SDS Section 8 requirements:

Eye & Face Protection: Chemical splash goggles or full-face shields when mixing concentrated acids, caustics, or chlorine bleach.

Hand Protection: Heavy-duty, chemical-resistant gloves (nitrile, neoprene, or butyl rubber). Standard thin vinyl food-handling gloves are unsuitable for chemical handling.

Body Protection: Heavy rubber aprons and non-slip chemical-resistant boots during pressure washing or floor degreasing.

Safe Chemical Dilution Protocol

When diluting chemical concentrates with water, employees must follow the universal laboratory safety mandate:

"Add Acid/Chemical to Water" (AAW): Always pour the chemical concentrate slowly INTO the water. NEVER pour water into concentrated chemical. Pouring water into concentrated acid or caustic chemical triggers violent exothermic reactions, causing the mixture to boil instantaneously and splash concentrated chemical onto the worker's face and skin.

Emergency First Aid & Eyewash Station Requirements

Where employees handle corrosive or severely irritating chemicals (concentrated caustic cleaners, acid line descalers, 12% chlorine stock), emergency first aid infrastructure is mandatory.

Emergency Eyewash Station Standards (ANSI Z358.1)

Under OSHA guidelines and ANSI Z358.1 standards, emergency eyewash stations must satisfy strict design and operational parameters:

Continuous Flush Duration: Must deliver a continuous, hands-free flow of flushing fluid for at least 15 continuous minutes .

Flow Rate & Dual-Eye Coverage: Must flush both eyes simultaneously at a minimum flow rate of 0.4 gallons per minute (1.5 L/min) under low velocity to avoid eye tissue damage.

Tepid Water Temperature: Flushing fluid must be maintained at a tepid temperature between 60°F and 100°F (16°C to 38°C) . Cold water causes thermal shock, forcing workers to exit the eyewash prematurely, while hot water accelerates chemical burns.

Accessibility & Travel Distance: Must be accessible within a 10-second walking distance (approx. 55 feet) on a single travel level, free from physical obstructions or locked doors.

Emergency Response Protocol

In the event of accidental chemical ingestion or severe skin/eye exposure:

Immediately flush affected eyes or skin at the eyewash/shower for 15 minutes.

Retrieve the product Safety Data Sheet (SDS) immediately.

Provide the SDS to emergency medical responders (EMS) or Poison Control personnel to ensure correct medical antidote administration.

Loading diagram... OSHA GHS Chemical Safety & Eyewash Response Protocol