Study guide

5.4 FDA Food Code: Time/Temperature Control for Safety (TCS) Foods

NEHA CP-FS Certified Professional - Food Safety Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Overview

1.1 CP-FS Exam Format, Scoring, Eligibility & Renewal 1.2 The Official Seven-Area Blueprint & Your Study Plan

2 Chapter 2: Foundations — Food Safety Hazards & Risk Factors

2.1 The Five CDC Risk Factors, Contamination Sources & Active Managerial Control 2.2 Foodborne Pathogens: Bacteria & Bacterial Toxins 2.3 Foodborne Pathogens: Viruses, Parasites, & Fungi 2.4 Microbial Growth Dynamics (FAT TOM, pH, Aw, Temperature) 2.5 Chemical, Physical, & Allergen Contaminants

3 Chapter 3: Developing Food Safety Policies, Procedures & Programs (Area A)

3.1 Prerequisite Programs (GMPs, SOPs, SSOPs, & GRPs) 3.2 Developing Allergen Control Procedures 3.3 Employee Health, Hygiene Policies, & Exclusion/Restriction 3.4 Developing an Integrated Pest Management (IPM) Plan 3.5 Cleaning vs. Sanitizing: Chemical Sanitizers & Thermal Methods 3.6 Transportation & Receiving Procedures 3.7 Food Preparation Policies & Determining When a Variance Is Required

4 Chapter 4: HACCP Plans, Training & Root Cause Analysis (Area A)

4.1 HACCP Principles 1 to 3: Hazard Analysis, CCPs, & Critical Limits 4.2 HACCP Principles 4 to 7: Monitoring, Corrective Actions, Verification, & Recordkeeping 4.3 FSMA Preventive Controls & HARPC vs. Traditional HACCP 4.4 Establishing, Administering & Documenting Employee Training 4.5 Root Cause Analysis, Corrective Action Plans, & Continuous Improvement

5 Chapter 5: Assessing Food Safety I — Preparing For & Conducting the Assessment (Area B)

5.1 Preparing for an Inspection: Equipment, Calibration, Scheduling & Compliance History 5.2 Risk Categories & Determining Assessment Frequency 5.3 Menu Review, Approved Sources & Food Labeling 5.4 FDA Food Code: Time/Temperature Control for Safety (TCS) Foods 5.5 Managing the Flow of Food & Assessing Cross-Contamination 5.6 Evaluating Chemical Handling, SDS, & Hazardous Materials Storage 5.7 Evaluating Waste Management, Refuse, & Recyclables Handling

6 Chapter 6: Assessing Food Safety II — Special Processes, Findings & Follow-Up (Area B)

6.1 Recognizing Special Processes & Specialized Equipment 6.2 Interpreting Test Results: pH, Water Activity, Shelf Stability & Dairy Sampling 6.3 Evaluating HACCP Plans & Administrative Documentation 6.4 Master Cleaning Schedules & Environmental Monitoring Programs 6.5 Assessing Pest Control Practices & Employee Behaviors 6.6 Documenting Findings, Corrective Action Plans & Risk Control Plans 6.7 Communicating with the PIC, Educating Staff, & Enforcement Actions

7 Chapter 7: Reviewing Establishment Plans (Area C)

7.1 U.S. Food Regulatory Structure & Researching Local Laws 7.2 Plan Review Submissions: Licenses, Permits & Variances 7.3 Site Plans, Menu-to-Site Fit & Hygienic Facility Layout 7.4 Physical Facility: Walls, Floors, Ceilings, Lighting & Ventilation 7.5 Plumbing, Cross-Connections, Backflow Prevention, & Water Supply 7.6 Hot Water Demand, Warewashing, Handwashing & Restroom Needs 7.7 Equipment Certification (NSF/ANSI), Storage Needs, & Pre-Opening Verification

8 Chapter 8: Investigating Foodborne Illness (Area D)

8.1 Principles of Foodborne Epidemiology & Outbreak Detection 8.2 Complaint Intake, Agency Notification & Stakeholder Communication 8.3 Case Definitions, Case Interviews, & the 72-Hour Food History 8.4 Facility Investigation, Environmental Assessment, & Sample Collection 8.5 Employee Impacts, Exclusion & Holding Food for Disposition 8.6 Traceback Methodology, Crisis Communication & Illness Reports

9 Chapter 9: Performing Recall Activities (Area E)

9.1 Recall Classification, Implicated Products & Regulatory Submissions 9.2 Traceability Procedures, Mock Recalls & Staff Training 9.3 Recall Communication, Effectiveness Checks & Product Disposition

10 Chapter 10: Managing Food Defense Practices (Area F)

10.1 Food Defense Planning (ALERT & CARVER+Shock Models) 10.2 Vulnerability Assessments, Tamper-Evident Packaging, & Supply Chain Security 10.3 Enforcement Protocols, Training, Drills & Post-Event Analysis

11 Chapter 11: Responding to Emergencies (Area G)

11.1 Imminent Health Hazards: Power Outages, Water Interruptions, & Fires 11.2 The Response Team, Segregating Food & Regulatory Notification 11.3 Recovery Plans, Infrastructure Assessment & Reopening Verification

5.4 FDA Food Code: Time/Temperature Control for Safety (TCS) Foods

Key Takeaways Explain This Topic AI

The 2022 FDA Food Code defines TCS food based on matrix interaction of water activity (Aw > 0.85) and pH (pH > 4.6), as well as specific raw/cut plant foods including cut leafy greens, cut tomatoes, raw seed sprouts, and garlic-in-oil mixtures.

Minimum internal cooking temperatures mandate 165°F (74°C) for 1 second (poultry, stuffed items, reheated TCS), 155°F (68°C) for 17 seconds (ground meats, held eggs), 145°F (63°C) for 15 seconds (whole muscle meat, fish, immediate-service eggs), and 135°F (57°C) for plant foods for hot holding.

TCS food must be maintained at or above 135°F (57°C) during hot holding, or at or below 41°F (5°C) during cold holding, with a maximum 7-day shelf life at 41°F.

The mandatory two-step cooling rule requires cooling hot TCS food from 135°F to 70°F within 2 hours, and from 70°F to 41°F within an additional 4 hours (total time not to exceed 6 hours).

Time as a Public Health Control (TPHC) permits holding TCS food without temperature control for up to 4 hours (or up to 6 hours if initial temp is 41°F max and does not exceed 70°F), provided written procedures and time-marking are maintained.

Last updated: August 2026

5.4 FDA Food Code: Time/Temperature Control for Safety (TCS) Foods

Exam Key: TCS food (formerly designated as Potentially Hazardous Food or PHF) requires specific time and temperature controls to limit infectious or toxigenic microorganism growth. The NEHA CP-FS exam heavily tests exact temperature thresholds, dwell times, cooling rules, date marking limits, and TPHC provisions under the 2022 FDA Food Code.

Definition of TCS Food

A Time/Temperature Control for Safety (TCS) food is defined by the FDA Food Code as a food that requires time/temperature control for safety to limit pathogenic microorganism growth or toxin formation.

Intrinsic Parameters: Water Activity ( A w A_w A w ​ ) & pH Matrices

Food safety classification relies on intrinsic factors, specifically water activity ( A w A_w A w ​ ) and pH . Unprocessed animal foods (raw or heat-treated) and plant foods with A w > 0.85 A_w > 0.85 A w ​ > 0.85 and p H > 4.6 pH > 4.6 p H > 4.6 are classified as TCS foods unless scientifically proven non-TCS via interaction tables in the FDA Food Code (Table A and Table B under Annex 8).

Foods Classified as TCS Food

Animal Foods: Raw or cooked meat, poultry, fish, shellfish, crustaceans, milk, and raw shell eggs.

Specific Plant Foods (Heat-Treated or Cut):

Cooked plant foods (e.g., cooked rice, beans, pasta, potatoes).

Cut Leafy Greens: Iceberg, romaine, spinach, leaf lettuce, kale, or salad mixes that have been cut, shredded, sliced, chopped, or torn.

Cut Tomatoes: Tomatoes that have been sliced, diced, or chopped.

Cut Melons: Watermelon, cantaloupe, or honeydew that have been cut.

Raw Seed Sprouts: Alfalfa, mung bean, or clover sprouts.

Garlic-in-Oil Mixtures: Untreated garlic-in-oil mixtures (unless modified with acidifying agents to maintain p H < = 4.6 pH <= 4.6 p H <= 4.6 or reduced A w A_w A w ​ ).

Non-TCS Exceptions

Air-cooled hard-boiled eggs with intact shells.

Food in unopened, commercially sterile, hermetically sealed containers.

Foods with low water activity ( A w < = 0.85 A_w <= 0.85 A w ​ <= 0.85 ) or high acidity ( p H < = 4.2 pH <= 4.2 p H <= 4.2 standalone, or specified matrix combinations).

Minimum Internal Cooking Temperatures & Dwell Times

Cooking TCS food to required minimum internal temperatures for specified dwell times ensures destruction of target vegetative pathogens (e.g., Salmonella , E. coli O157:H7, Campylobacter ).

Minimum Internal Temperature Dwell Time Applicable Food Products

165°F (74°C) < 1 second (Instantaneous) • Poultry (whole or ground chicken, turkey, duck).; • Stuffing containing fish, meat, pork, or poultry.; • Stuffed meat, seafood, poultry, or pasta.; • Dishes containing previously cooked TCS ingredients.; • Reheated TCS food for hot holding (within 2 hours).; • Wild game animals.

155°F (68°C) 17 seconds • Ground meat (beef, pork, lamb).; • Comminuted fish and meat.; • Injected or mechanically tenderized meats.; • Ratites (ostrich, emu).; • Shell eggs held hot for service (buffet lines).

145°F (63°C) 15 seconds • Whole muscle meat (steaks, chops of beef, pork, veal, lamb).; • Fish, shellfish, and crustaceans.; • Commercially raised game animals.; • Shell eggs cooked for immediate service to order.

145°F (63°C) 4 minutes (or lower temp chart) • Whole meat roasts (beef, pork, lamb, veal). Note: Roasts can be cooked using alternative time/temp charts (e.g., 130°F for 112 minutes).

135°F (57°C) No dwell time specified • Plant foods (fruits, vegetables, grains, legumes) cooked for hot holding.; • Commercially processed, ready-to-eat TCS foods reheated for hot holding.

Microwave Cooking Requirements

When cooking raw animal foods in a microwave oven, the food must be cooked to at least 165°F (74°C) in all parts, covered to retain surface moisture, rotated or stirred halfway through, and allowed to stand covered for 2 minutes post-cooking to equalize temperature.

  • Holding & Cooling Protocols TEMPERATURE DANGER ZONE (TDZ)
  • 41°F (5°C) ────► 135°F (57°C)
  • [Rapid Pathogen Multiplication Zone: 70°F to 125°F]
  • ◄── Safe Cold Holding Safe Hot Holding ──►
  • (41°F / 5°C or lower) (135°F / 57°C or higher)
  • Hot and Cold Holding Standards

Hot Holding: Maintain TCS food at 135°F (57°C) or higher .

Cold Holding: Maintain TCS food at 41°F (5°C) or lower .

Two-Step Cooling Protocol (FDA Food Code § 3-501.14)

When cooling hot TCS food, it must pass through the Temperature Danger Zone rapidly to prevent spore-forming bacteria (such as Clostridium perfringens and Bacillus cereus ) from germinating and multiplying:

Step 1: Cool hot TCS food from 135°F (57°C) to 70°F (21°C) within 2 hours .

Step 2: Cool from 70°F (21°C) to 41°F (5°C) within an additional 4 hours .

Total Maximum Cooling Duration: 6 hours total .

Corrective Action: If food does not reach 70°F within the initial 2 hours, it must be reheated to 165°F for 1 second and re-cooled, or discarded.

Approved Rapid Cooling Methods

Dividing food into shallow stainless steel pans (product depth < = 2 <= 2 <= 2 inches for thick foods, < = 3 <= 3 <= 3 inches for liquids).

Placing food containers in ice-water baths while stirring frequently.

Using blast chillers or rapid cooling equipment.

Utilizing hollow ice-paddles / ice wands to stir hot liquids.

Adding ice as an ingredient to concentrated stocks or soups.

  • Date Marking & Time as a Public Health Control (TPHC)
  • Ready-to-Eat (RTE) TCS Food Date Marking

Refrigerated, Ready-to-Eat (RTE) TCS food prepared and held in a food establishment for more than 24 hours must be date-marked:

Maximum Shelf Life: Held at 41°F (5°C) or lower for a maximum of 7 days .

Day Calculation: Day 1 is the day of preparation or the day a commercial container is opened.

Combined Ingredients Rule: When mixing commercially prepared RTE ingredients or multi-day components, the discard date is governed by the earliest-prepared ingredient .

Time as a Public Health Control (TPHC) (FDA Food Code § 3-501.19)

If temperature control is not maintained, time alone can be used as a public health control under strict operational conditions:

1. Four-Hour Rule (Hot or Cold TCS Food)

Initial temperature must be 41°F (5°C) or lower (when removed from cold holding) or 135°F (57°C) or higher (when removed from hot holding).

Maximum display duration: 4 hours .

Food must be served, sold, or discarded within 4 hours. Unserved food cannot be returned to refrigeration or re-heated.

2. Six-Hour Rule (Cold TCS Food Only)

Initial temperature must be 41°F (5°C) or lower when removed from cold storage.

Food temperature must be monitored and must not exceed 70°F (21°C) during the 6-hour period.

Maximum display duration: 6 hours .

Food must be discarded immediately if its temperature exceeds 70°F at any point, or when the 6-hour limit is reached.

Mandatory TPHC Prerequisites: Written Standard Operating Procedures (SOPs) must be maintained on-site and approved by the regulatory authority, and containers must be clearly labeled with the exact start and discard times.

Loading diagram... FDA Food Code Two-Step Cooling Timeline