Study guide
4.1 HACCP Principles 1 to 3: Hazard Analysis, CCPs, & Critical Limits
NEHA CP-FS Certified Professional - Food Safety Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 CP-FS Exam Format, Scoring, Eligibility & Renewal 1.2 The Official Seven-Area Blueprint & Your Study Plan
2 Chapter 2: Foundations — Food Safety Hazards & Risk Factors
2.1 The Five CDC Risk Factors, Contamination Sources & Active Managerial Control 2.2 Foodborne Pathogens: Bacteria & Bacterial Toxins 2.3 Foodborne Pathogens: Viruses, Parasites, & Fungi 2.4 Microbial Growth Dynamics (FAT TOM, pH, Aw, Temperature) 2.5 Chemical, Physical, & Allergen Contaminants
3 Chapter 3: Developing Food Safety Policies, Procedures & Programs (Area A)
3.1 Prerequisite Programs (GMPs, SOPs, SSOPs, & GRPs) 3.2 Developing Allergen Control Procedures 3.3 Employee Health, Hygiene Policies, & Exclusion/Restriction 3.4 Developing an Integrated Pest Management (IPM) Plan 3.5 Cleaning vs. Sanitizing: Chemical Sanitizers & Thermal Methods 3.6 Transportation & Receiving Procedures 3.7 Food Preparation Policies & Determining When a Variance Is Required
4 Chapter 4: HACCP Plans, Training & Root Cause Analysis (Area A)
4.1 HACCP Principles 1 to 3: Hazard Analysis, CCPs, & Critical Limits 4.2 HACCP Principles 4 to 7: Monitoring, Corrective Actions, Verification, & Recordkeeping 4.3 FSMA Preventive Controls & HARPC vs. Traditional HACCP 4.4 Establishing, Administering & Documenting Employee Training 4.5 Root Cause Analysis, Corrective Action Plans, & Continuous Improvement
5 Chapter 5: Assessing Food Safety I — Preparing For & Conducting the Assessment (Area B)
5.1 Preparing for an Inspection: Equipment, Calibration, Scheduling & Compliance History 5.2 Risk Categories & Determining Assessment Frequency 5.3 Menu Review, Approved Sources & Food Labeling 5.4 FDA Food Code: Time/Temperature Control for Safety (TCS) Foods 5.5 Managing the Flow of Food & Assessing Cross-Contamination 5.6 Evaluating Chemical Handling, SDS, & Hazardous Materials Storage 5.7 Evaluating Waste Management, Refuse, & Recyclables Handling
6 Chapter 6: Assessing Food Safety II — Special Processes, Findings & Follow-Up (Area B)
6.1 Recognizing Special Processes & Specialized Equipment 6.2 Interpreting Test Results: pH, Water Activity, Shelf Stability & Dairy Sampling 6.3 Evaluating HACCP Plans & Administrative Documentation 6.4 Master Cleaning Schedules & Environmental Monitoring Programs 6.5 Assessing Pest Control Practices & Employee Behaviors 6.6 Documenting Findings, Corrective Action Plans & Risk Control Plans 6.7 Communicating with the PIC, Educating Staff, & Enforcement Actions
7 Chapter 7: Reviewing Establishment Plans (Area C)
7.1 U.S. Food Regulatory Structure & Researching Local Laws 7.2 Plan Review Submissions: Licenses, Permits & Variances 7.3 Site Plans, Menu-to-Site Fit & Hygienic Facility Layout 7.4 Physical Facility: Walls, Floors, Ceilings, Lighting & Ventilation 7.5 Plumbing, Cross-Connections, Backflow Prevention, & Water Supply 7.6 Hot Water Demand, Warewashing, Handwashing & Restroom Needs 7.7 Equipment Certification (NSF/ANSI), Storage Needs, & Pre-Opening Verification
8 Chapter 8: Investigating Foodborne Illness (Area D)
8.1 Principles of Foodborne Epidemiology & Outbreak Detection 8.2 Complaint Intake, Agency Notification & Stakeholder Communication 8.3 Case Definitions, Case Interviews, & the 72-Hour Food History 8.4 Facility Investigation, Environmental Assessment, & Sample Collection 8.5 Employee Impacts, Exclusion & Holding Food for Disposition 8.6 Traceback Methodology, Crisis Communication & Illness Reports
9 Chapter 9: Performing Recall Activities (Area E)
9.1 Recall Classification, Implicated Products & Regulatory Submissions 9.2 Traceability Procedures, Mock Recalls & Staff Training 9.3 Recall Communication, Effectiveness Checks & Product Disposition
10 Chapter 10: Managing Food Defense Practices (Area F)
10.1 Food Defense Planning (ALERT & CARVER+Shock Models) 10.2 Vulnerability Assessments, Tamper-Evident Packaging, & Supply Chain Security 10.3 Enforcement Protocols, Training, Drills & Post-Event Analysis
11 Chapter 11: Responding to Emergencies (Area G)
11.1 Imminent Health Hazards: Power Outages, Water Interruptions, & Fires 11.2 The Response Team, Segregating Food & Regulatory Notification 11.3 Recovery Plans, Infrastructure Assessment & Reopening Verification
4.1 HACCP Principles 1 to 3: Hazard Analysis, CCPs, & Critical Limits
Key Takeaways Explain This Topic AI
The 5 preliminary steps (HACCP team formation, product description, intended use, flow diagram, on-site flow verification) are mandatory precursors to applying the 7 HACCP principles.
Principle 1 (Hazard Analysis) evaluates biological, chemical (including radiological & allergens), and physical hazards based on two distinct metrics: likelihood of occurrence and severity of potential illness/injury.
Principle 2 (Determine Critical Control Points) utilizes the Codex/NACMCF 4-question decision tree to identify steps where control is essential to prevent, eliminate, or reduce a food safety hazard to an acceptable level.
Critical Control Points (CCPs) differ from Control Points (CPs) and Prerequisite Programs (PRPs): CCPs specifically target significant hazards, whereas CPs manage operational quality and PRPs maintain general sanitation.
Principle 3 (Establish Critical Limits) defines maximum or minimum scientific boundaries (e.g., internal cooking temperature of 165°F for poultry or pasteurization at 161°F for 15 seconds) that must be met to ensure hazard control.
Last updated: August 2026
4.1 HACCP Principles 1 to 3: Hazard Analysis, CCPs, & Critical Limits
Exam Key: HACCP was originally developed in the 1960s by the Pillsbury Company, NASA, and the U.S. Army Natick Laboratories to guarantee 100% sterile food for space travel. Standardized by the National Advisory Committee on Microbiological Criteria for Foods (NACMCF) in 1997 and Codex Alimentarius, HACCP is a systematic, preventive approach to food safety.
The 5 Preliminary Tasks of HACCP
Before applying the seven principles of HACCP, a food facility must complete five mandatory preliminary organizational steps:
Assemble the Multidisciplinary HACCP Team: Include individuals from quality assurance, plant operations, sanitation, equipment maintenance, and food microbiology. External experts may supplement internal knowledge.
Describe the Food Product and Distribution: Document raw ingredients, processing methods, packaging (e.g., MAP, vacuum, glass), storage conditions (ambient, refrigerated, frozen), and distribution channels.
Identify Intended Use and Target Consumers: Define how the consumer will prepare the food (e.g., ready-to-eat vs. cook-and-serve) and specify if the product targets highly susceptible populations (vulnerable groups: elderly, infants, pregnant women, immunocompromised individuals).
Construct the Process Flow Diagram: Map every step in the operation from raw material receiving, storage, preparation, processing, packaging, and holding to final shipping.
Conduct On-Site Verification of the Flow Diagram: The HACCP team must physically walk through the facility during active operations across all work shifts to verify that the flow diagram accurately reflects real-world processing steps.
Principle 1: Conduct a Hazard Analysis
Hazard Analysis is the process of collecting and evaluating information on hazards associated with the food under consideration to decide which are significant and must be addressed in the HACCP plan.
The Three Hazard Categories
Biological Hazards: Pathogenic bacteria ( Salmonella spp., Escherichia coli O157:H7, Listeria monocytogenes , Clostridium botulinum ), viruses (Norovirus, Hepatitis A), parasites ( Cryptosporidium , Giardia , Trichinella spiralis ), and toxin-producing molds.
Chemical Hazards: Naturally occurring toxins (mycotoxins, histamine/scombroid toxin, ciguatoxin), intentional chemical additions (unapproved colors/preservatives), unintentional contaminants (cleaning chemicals, sanitizers, pest control compounds, heavy metals), and mandatory food allergens (the Big 9 U.S. allergens).
Physical Hazards: Foreign materials capable of causing physical trauma, choked airways, or internal lacerations. FDA Compliance Policy Guide 555.425 identifies hard or sharp objects measuring 7 mm to 25 mm in length as significant hazards.
Risk Assessment: Likelihood vs. Severity
A hazard is classified as a significant hazard requiring control in the HACCP plan based on a two-dimensional matrix: Risk Level = Likelihood of Occurrence × Severity of Consequences \text{Risk Level} = \text{Likelihood of Occurrence} \times \text{Severity of Consequences} Risk Level = Likelihood of Occurrence × Severity of Consequences
- Severity Level Low Likelihood High Likelihood
- High Severity (e.g., C. botulinum botulism, death) Significant Hazard Critical Significant Hazard
Low Severity (e.g., minor spoilage, cosmetic defect) Not Significant (CP / PRP) Not Significant (Quality Control)
Principle 2: Determine Critical Control Points (CCPs)
A Critical Control Point (CCP) is defined as a step at which control can be applied and is essential to prevent or eliminate a food safety hazard or reduce it to an acceptable level.
Distinguishing CCPs, CPs, and PRPs
Critical Control Point (CCP): Focuses specifically on significant safety hazards (e.g., cooking chicken to 165 ° F 165^{°}F 16 5 ° F to kill Salmonella ).
Control Point (CP): Any step where biological, chemical, or physical factors can be controlled, but control is not essential to prevent a safety hazard (e.g., chilling cut lettuce to maintain crispness and quality).
Prerequisite Program (PRP): Controls general environment and baseline operational hygiene (e.g., employee handwashing or master sanitation schedules).
The Codex/NACMCF CCP Decision Tree
To determine objectively whether a step is a CCP, the HACCP team applies the standard 4-question decision tree logic to each identified significant hazard: [ Question 1: Do preventive control measures exist? ]
- | |
- Yes No --> [ Modify step or process ]
- v
- [ Question 2: Is the step specifically designed to eliminate ]
- [ or reduce the hazard to an acceptable level? ]
- | |
- Yes --> ( IT IS A CCP! ) No
- v
- [ Question 3: Could contamination occur in excess of acceptable levels? ]
- | |
- Yes No --> ( NOT A CCP )
- v
- [ Question 4: Will a subsequent step eliminate or reduce the hazard? ]
- | |
- Yes --> ( NOT A CCP ) No --> ( IT IS A CCP! )
- Principle 3: Establish Critical Limits
A Critical Limit (CL) is a maximum and/or minimum value to which a biological, chemical, or physical parameter must be controlled at a CCP to prevent, eliminate, or reduce to an acceptable level the occurrence of a food safety hazard.
Characteristics of Critical Limits
Measurable & Observable: Critical limits must be quantifiable in real time on the processing line. Parameters include temperature, time, physical dimensions, flow rate, pH, water activity ( A w A_w A w ), moisture content, and available chlorine concentration (ppm).
Boundaries of Safety: Critical limits mark the exact line between safe and unsafe product. They must never be based on subjective guesswork.
Scientific Validation: Critical limits must be backed by published regulatory standards (e.g., FDA Food Code, USDA FSIS Performance Standards), peer-reviewed scientific literature, or experimental validation studies conducted by recognized Processing Authorities.
Common Critical Limit Examples
CCP Process Step Hazard Being Controlled Scientifically Validated Critical Limit
Thermal Cooking (Poultry) Salmonella spp., Campylobacter Minimum internal temperature of 165 ° F 165^{°}F 16 5 ° F ( 74 ° C 74^{°}C 7 4 ° C ) held instantaneously (1 second).
Milk Pasteurization (HTST) Coxiella burnetii , L. monocytogenes Minimum temperature of 161 ° F 161^{°}F 16 1 ° F ( 72 ° C 72^{°}C 7 2 ° C ) for at least 15 seconds.
Acidified Foods (Pickling) Clostridium botulinum spore germination Maximum finished equilibrium pH of < = 4.6 <= 4.6 <= 4.6 .
Beef Jerky Desiccation E. coli O157:H7, Staph aureus toxin Maximum finished water activity ( A w A_w A w ) of < = 0.85 <= 0.85 <= 0.85 .
Raw Meat Metal Detection Ferrous/Non-Ferrous/SS physical hazards Rejection of any product triggering signal > = 1.5 m m >= 1.5 mm >= 1.5 mm ferrous, > = 2.0 m m >= 2.0 mm >= 2.0 mm non-ferrous, > = 2.5 m m >= 2.5 mm >= 2.5 mm stainless steel.
Critical Limits vs. Operating Limits
Facilities often establish stricter internal targets called Operating Limits to prevent accidental critical limit breaches. For example, if the Critical Limit for cooking chicken is 165 ° F 165^{°}F 16 5 ° F , an facility might set an Operating Limit of 170 ° F 170^{°}F 17 0 ° F . If the temperature drops to 168 ° F 168^{°}F 16 8 ° F , operators adjust the oven heat without causing a regulatory HACCP deviation.