Study guide

7.1 Manning's Equation & Open Channel Flow Hydraulics

Certified Professional in Erosion and Sediment Control CPESC

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Rules, Regulations & Clean Water Act Framework

1.1 Federal Clean Water Act & NPDES Regulatory Framework 1.2 Construction General Permit (CGP), NOI/NOT & State/Local Jurisdiction 1.3 CWA Sections 401, 404 & Specialized Environmental Laws

2 Chapter 2: Site Assessment, Watershed Delineation & Resource Inventory

2.1 Topographic Analysis, Drainage Areas & Watershed Delineation 2.2 Soil Identification, NRCS Soil Surveys & Hydrologic Soil Groups 2.3 Environmental Site Constraints, Receiving Waters & Sensitive Areas

3 Chapter 3: Site Planning, Construction Sequencing & Hazard Management

3.1 Land Disturbance Minimization & Construction Phasing 3.2 Construction Scheduling, Seasonal Windows & Buffer Zones 3.3 Site Hazard Identification & Clearing/Grading Limits

4 Chapter 4: Soil Erosion Mechanics & Types

4.1 Fundamentals of Erosion & the Sedimentation Cycle 4.2 Mechanics of Water Erosion: Splash, Sheet, Rill & Gully 4.3 Channel, Stream Bank, Shoreline & Wind Erosion

5 Chapter 5: Soil Loss Prediction: USLE, RUSLE & MUSLE

5.1 Universal Soil Loss Equation (USLE/RUSLE) Overview & R-Factor 5.2 Soil Erodibility Factor (K) & Topographic Factor (LS) 5.3 Cover Management Factor (C) & Support Practice Factor (P) 5.4 Modified USLE (MUSLE) & Single-Storm Sediment Yield

6 Chapter 6: Runoff Hydrology & Watershed Modeling

6.1 Hydrologic Cycle, Runoff Generation & Time of Concentration 6.2 The Rational Method (Q = CiA) & Peak Runoff Estimation 6.3 NRCS (SCS) Curve Number Method & Runoff Volume Estimation

7 Chapter 7: Runoff Conveyance & Open Channel Hydraulics

7.1 Manning's Equation & Open Channel Flow Hydraulics 7.2 Temporary Diversion Dikes, Berms & Swales 7.3 Grade Stabilization Structures, Check Dams & Flumes

8 Chapter 8: Soil Preparation, Fertility & Revegetation

8.1 Soil Testing, pH Adjustment & Nutrient Management (N-P-K) 8.2 Soil Amendments, Compost Incorporation & Seedbed Preparation 8.3 Plant Selection: Native vs. Non-Native, Turf vs. Woody, Cool vs. Warm Season 8.4 Seeding Methods, Nurse Crops & Hydroseeding Application

9 Chapter 9: Mulching & Rolled Erosion Control Products (RECPs)

9.1 Mulch Types, Hydraulic Mulches & Bonded Fiber Matrices (BFMs) 9.2 Rolled Erosion Control Products (RECPs): Temporary ECBs 9.3 Turf Reinforcement Mats (TRMs) & Permanent Vegetative Armoring 9.4 Hard Armoring: Riprap, Gabions, Articulated Concrete & Cellular Confinement

10 Chapter 10: Perimeter Sediment Barriers & Filtration Controls

10.1 Silt Fence Design, Trenching, Installation & Maintenance 10.2 Vegetative Buffer Strips, Compost Filter Socks & Fiber Rolls (Wattles) 10.3 Gravel Bag Berms, Sandbag Barriers & Brush Barriers

11 Chapter 11: Storm Drain Inlet Protection & Slope Drains

11.1 Drop Inlet Protection: Silt Fence, Wire Mesh & Manufactured Inserts 11.2 Curb Inlet Protection: Gravel Berms, Filter Socks & Foam Inserts 11.3 Temporary & Permanent Pipe Slope Drains and Subsurface Drains

12 Chapter 12: Sediment Traps, Basins & Active Treatment

12.1 Sediment Traps: Design Criteria, Sizing & Maintenance 12.2 Sediment Basins: Sizing (Volume & Surface Area), Length-to-Width Ratio 12.3 Basin Outflow Structures: Skimmers, Perforated Risers & Baffles 12.4 Chemical Treatment, Flocculants (PAM/Chitosan) & Jar Testing

13 Chapter 13: Non-Sediment Pollution Prevention & Good Housekeeping

13.1 Construction Site Dewatering Operations & Filtration 13.2 Concrete Washout, Masonry & Mortar Waste Management 13.3 Fuels, Petroleum, Hazardous Chemicals & Spill Response 13.4 Stabilized Construction Entrances, Tire Washes & Dust Control

14 Chapter 14: SWPPP Administration, Site Inspections & Ethics

14.1 SWPPP Elements, Site Maps & Plan Amendments 14.2 Construction Inspection Protocols, Schedules & Documentation 14.3 Turbidity Monitoring, Discharge Sampling & Corrective Action Logs 14.4 Field Education, Subcontractor Oversight & CPESC Code of Ethics

7.1 Manning's Equation & Open Channel Flow Hydraulics

Key Takeaways Explain This Topic AI

Open channel flow is driven by gravity with a free water surface at atmospheric pressure; under steady uniform flow, the channel bed slope, water surface slope (HGL), and energy slope (EGL) are parallel (S0 = Sw = Sf).

Manning's Equation in US Customary units includes an empirical conversion factor of 1.486 derived from (3.28084 ft/m)^(1/3), linking flow velocity directly to boundary roughness, hydraulic radius, and bed slope.

Hydraulic radius (R = A / P) quantifies channel conveyance efficiency by measuring flow area relative to frictional wetted perimeter; semicircular and specific trapezoidal geometries maximize hydraulic radius.

The Froude number (Fr = V / √(gD)) distinguishes subcritical (Fr < 1.0), critical (Fr = 1.0), and supercritical (Fr > 1.0) flow regimes; supercritical flow on construction sites poses severe scour hazards and requires energy dissipation to manage hydraulic jumps.

The tractive force / maximum permissible shear stress method (τ = γ R S) provides an accurate, physically sound basis for lining design compared to the historic permissible velocity method because it accounts for flow depth and boundary shear concentration.

Last updated: September 2026

7.1 Manning's Equation & Open Channel Flow Hydraulics

Quick Reference: Open channel flow is liquid motion driven by gravity with a continuous free surface exposed to atmospheric pressure. Unlike closed conduit pressurized pipe flow, open channel flow depth and velocity vary with cross-sectional geometry, bed slope, and boundary friction. Under steady, uniform flow , the channel bed ( S 0 S_0 S 0 ​ ), the water surface or Hydraulic Grade Line (HGL) , and the total Energy Grade Line (EGL) are strictly parallel ( S 0 = S w = S f = S S_0 = S_w = S_f = S S 0 ​ = S w ​ = S f ​ = S ). In US Customary engineering, Manning's Equation ( V = 1.486 n R 2 / 3 S 1 / 2 V = \frac{1.486}{n} R^{2/3} S^{1/2} V = n 1.486 ​ R 2/3 S 1/2 ) is the standard predictive tool for velocity and discharge capacity. Designing temporary swales and ditches requires evaluating flow regimes via the Froude Number ( F r = V g D Fr = \frac{V}{\sqrt{g D}} F r = g D ​ V ​ ) and sizing channel linings using the maximum permissible shear stress method ( τ 0 = γ R S \tau_0 = \gamma R S τ 0 ​ = γ RS ) rather than legacy velocity limits alone.

Governing Physics of Open Channel Flow

In civil engineering and environmental hydraulics, fluid conveyance is divided into two broad categories: pipe flow (where water fills a closed conduit under positive hydrostatic pressure) and open channel flow (where the moving liquid maintains a free surface exposed directly to atmospheric pressure). On construction sites and land development projects, runoff conveyance systems—including diversion ditches, roadside swales, perimeter interceptors, temporary bypass channels, and natural streams—function almost exclusively as open channels.

Forces Governing Open Channel Flow

Open channel flow is driven by the tangential component of gravity acting along the longitudinal slope of the channel bed. For a discrete control volume of water of length L L L , cross-sectional area A A A , and unit weight γ \gamma γ , the gravitational driving force ( F g F_g F g ​ ) parallel to a channel bed inclined at angle θ \theta θ is: F g = γ × A × L × sin ⁡ θ F_g = \gamma \times A \times L \times \sin \theta F g ​ = γ × A × L × sin θ

Because channel slopes in civil engineering are typically gentle ( θ < 10 ∘ \theta < 10^\circ θ < 1 0 ∘ ), the approximation sin ⁡ θ ≈ tan ⁡ θ = S 0 \sin \theta \approx \tan \theta = S_0 sin θ ≈ tan θ = S 0 ​ (where S 0 S_0 S 0 ​ is the bed slope in ft/ft \text{ft/ft} ft/ft ) is universally applied: F g ≈ γ × A × L × S 0 F_g \approx \gamma \times A \times L \times S_0 F g ​ ≈ γ × A × L × S 0 ​

Resisting this gravitational force is the boundary shear resistance ( F r F_r F r ​ ) exerted by the channel bed and banks over the wetted perimeter ( P P P ): F r = τ 0 × P × L F_r = \tau_0 \times P \times L F r ​ = τ 0 ​ × P × L

Where:

τ 0 \tau_0 τ 0 ​ = Mean boundary shear stress (tractive force per unit wetted area, in lbs/ft 2 \text{lbs/ft}^2 lbs/ft 2 or psf)

  • P P P = Wetted perimeter of the cross-section (ft)
  • L L L = Length of the channel reach (ft)
  • Steady Uniform Flow vs. Varied Flow

Steady Flow: Hydraulic parameters at any fixed cross-section (depth y y y , velocity V V V , discharge Q Q Q ) do not change over time ( ∂ y / ∂ t = 0 \partial y / \partial t = 0 ∂ y / ∂ t = 0 , ∂ V / ∂ t = 0 \partial V / \partial t = 0 ∂ V / ∂ t = 0 ).

Uniform Flow: Hydraulic parameters do not change along the longitudinal length of the channel reach ( ∂ y / ∂ x = 0 \partial y / \partial x = 0 ∂ y / ∂ x = 0 , ∂ V / ∂ x = 0 \partial V / \partial x = 0 ∂ V / ∂ x = 0 ). The depth of water in uniform flow is termed the normal depth ( y n y_n y n ​ ).

When flow is both steady and uniform, the gravitational driving force precisely balances the boundary shear resistance ( F g = F r F_g = F_r F g ​ = F r ​ ): γ × A × L × S 0 = τ 0 × P × L \gamma \times A \times L \times S_0 = \tau_0 \times P \times L γ × A × L × S 0 ​ = τ 0 ​ × P × L τ 0 = γ × ( A P ) × S 0 = γ × R × S 0 \tau_0 = \gamma \times \left( \frac{A}{P} \right) \times S_0 = \gamma \times R \times S_0 τ 0 ​ = γ × ( P A ​ ) × S 0 ​ = γ × R × S 0 ​

This fundamental equilibrium equation confirms that boundary shear stress is directly proportional to fluid density, channel slope, and the ratio of flow area to wetted perimeter ( R = A / P R = A / P R = A / P ).

The Energy Grade Line (EGL) & Hydraulic Grade Line (HGL)

To analyze energy distribution along a channel, engineers apply the Bernoulli Energy Equation . The total hydraulic energy head ( H H H ) at any channel cross-section, measured relative to an arbitrary datum, is expressed in feet of fluid: H = z + y + V 2 2 g H = z + y + \frac{V^2}{2g} H = z + y + 2 g V 2 ​

Where:

z z z = Channel invert bed elevation above datum (ft)

y y y = Flow depth normal to the bed (ft), representing potential pressure head

V 2 2 g \frac{V^2}{2g} 2 g V 2 ​ = Velocity head (dynamic kinetic energy head, ft), where g = 32.2 ft/s 2 g = 32.2\text{ ft/s}^2 g = 32.2 ft/s 2 and V V V is mean velocity in ft/s

Hydraulic Grade Line (HGL): Represents the piezometric head ( z + y z + y z + y ). In open channel flow, because the water surface is open to the atmosphere (gauge pressure p = 0 p = 0 p = 0 ), the HGL is identical to the free water surface profile .

Energy Grade Line (EGL): Positioned at a vertical distance of V 2 2 g \frac{V^2}{2g} 2 g V 2 ​ above the HGL, representing the total mechanical energy available per unit weight of fluid.

In steady, uniform flow , the velocity head remains constant along the reach. Consequently, the channel bed slope ( S 0 S_0 S 0 ​ ), the water surface slope ( S w S_w S w ​ or HGL slope), and the energy friction slope ( S f S_f S f ​ or EGL slope) are perfectly parallel : S 0 = S w = S f = S S_0 = S_w = S_f = S S 0 ​ = S w ​ = S f ​ = S

When flow is non-uniform (such as backwater curves approaching a constricted culvert or drawdown curves approaching an abrupt drop), S 0 ≠ S w ≠ S f S_0 \neq S_w \neq S_f S 0 ​  = S w ​  = S f ​ , requiring gradually varied flow (GVF) standard step routing.

Manning's Equation in US Customary Units

First formulated by the Irish engineer Robert Manning in 1889 and subsequently adapted by civil engineers worldwide, Manning's Equation is the premier empirical relationship for evaluating uniform, steady open channel flow.

The Governing Formulations

In US Customary units (English Engineering system), Manning's Equation for mean cross-sectional velocity is: V = 1.486 n × R 2 / 3 × S 1 / 2 V = \frac{1.486}{n} \times R^{2/3} \times S^{1/2} V = n 1.486 ​ × R 2/3 × S 1/2

By multiplying mean velocity ( V V V ) by the cross-sectional flow area ( A A A ), the volumetric discharge capacity ( Q Q Q ) is obtained: Q = V × A = 1.486 n × A × R 2 / 3 × S 1 / 2 Q = V \times A = \frac{1.486}{n} \times A \times R^{2/3} \times S^{1/2} Q = V × A = n 1.486 ​ × A × R 2/3 × S 1/2

Where:

V V V = Mean cross-sectional flow velocity ( ft/s \text{ft/s} ft/s )

Q Q Q = Volumetric flow rate or discharge capacity ( ft 3 /s \text{ft}^3\text{/s} ft 3 /s or cfs \text{cfs} cfs )

  • n n n = Manning's roughness coefficient (dimensionless empirical parameter)
  • A A A = Cross-sectional area of flow ( ft 2 \text{ft}^2 ft 2 )
  • P P P = Wetted perimeter of the cross-section ( ft \text{ft} ft )
  • R R R = Hydraulic radius ( ft \text{ft} ft ), defined as R = A / P R = A / P R = A / P

S S S = Longitudinal channel energy gradient or bed slope ( ft/ft \text{ft/ft} ft/ft , dimensionless decimal format)

Derivation of the 1.486 Conversion Factor

In the International System of Units (SI), Manning's equation is written without a numerical coefficient: V = 1.0 n × R 2 / 3 × S 1 / 2 [SI Metric, with V in m/s, R in m] V = \frac{1.0}{n} \times R^{2/3} \times S^{1/2} \quad \text{[SI Metric, with } V \text{ in m/s, } R \text{ in m]} V = n 1.0 ​ × R 2/3 × S 1/2 [SI Metric, with V in m/s, R in m]

To preserve the exact same numerical values for the roughness coefficient n n n across both metric and English systems, an empirical conversion factor is required for US Customary units. Because 1 meter = 3.28084 feet 1\text{ meter} = 3.28084\text{ feet} 1 meter = 3.28084 feet , converting the length term R 2 / 3 R^{2/3} R 2/3 from meters to feet requires multiplying by: ( 3.28084 ) 1 / 3 ≈ 1.48599 ≈ 1.486 (3.28084)^{1/3} \approx 1.48599 \approx 1.486 ( 3.28084 ) 1/3 ≈ 1.48599 ≈ 1.486

Thus, the constant 1.486 1.486 1.486 is purely a dimensional conversion multiplier allowing engineers to use standardized n n n -values while working in feet and seconds.

Geometric Elements of Open Channels

Accurately computing flow capacity requires breaking down the cross-sectional geometry into five fundamental hydraulic parameters:

Cross-Sectional Flow Area ( A A A , ft 2 \text{ft}^2 ft 2 ): The plane area occupied by water, measured perpendicular to the direction of flow.

Wetted Perimeter ( P P P , ft \text{ft} ft ): The total linear distance of the channel boundary (bed and side slopes) in direct contact with the flowing water. Critically, the top width of the air-water free surface is excluded because air provides negligible shear drag compared to the solid boundary.

Hydraulic Radius ( R R R , ft \text{ft} ft ): The ratio of flow area to wetted perimeter ( R = A / P R = A / P R = A / P ). The hydraulic radius serves as an index of hydraulic efficiency. A channel shape that minimizes wetted perimeter relative to area reduces frictional drag, thereby maximizing mean velocity and discharge.

Top Width ( T T T , ft \text{ft} ft ): The linear horizontal width of the water surface across the channel.

Hydraulic Depth ( D D D , ft \text{ft} ft ): The ratio of flow area to top width ( D = A / T D = A / T D = A / T ). The hydraulic depth represents the average depth of the water column and is the governing characteristic length used in wave speed and Froude number calculations.

Hydraulically Optimal Sections

A cross-section that conveys the maximum possible discharge ( Q Q Q ) for a given cross-sectional area ( A A A ), slope ( S S S ), and roughness ( n n n ) is termed the hydraulically optimal (or most efficient) cross-section . Mathematically, this corresponds to the shape with the minimum wetted perimeter ( P P P ) , which maximizes the hydraulic radius ( R R R ):

Theoretical Optimum: A semicircular channel cross-section has the lowest possible perimeter-to-area ratio. However, semicircular shapes are practically impossible to excavate and stabilize in unreinforced earthen soils.

Trapezoidal Optimum: A half-hexagon profile with side slopes angled at 60 ∘ 60^\circ 6 0 ∘ to the horizontal ( z = 1 / 3 ≈ 0.577 : 1 z = 1/\sqrt{3} \approx 0.577:1 z = 1/ 3 ​ ≈ 0.577 : 1 ) and bottom width b = 2 y / 3 b = 2 y / \sqrt{3} b = 2 y / 3 ​ . For this shape, R = y / 2 R = y / 2 R = y /2 .

Rectangular Optimum: A rectangle whose bottom width is exactly twice its flow depth ( b = 2 y b = 2y b = 2 y ), yielding R = y / 2 R = y / 2 R = y /2 .

Triangular Optimum: A 90 ∘ 90^\circ 9 0 ∘ V-notch with 1 : 1 1:1 1 : 1 side slopes ( z = 1.0 z = 1.0 z = 1.0 ), yielding R = y / ( 2 2 ) ≈ 0.354 y R = y / (2 \sqrt{2}) \approx 0.354 y R = y / ( 2 2 ​ ) ≈ 0.354 y .

Channel Geometry Reference Formulas

The following table summarizes the standard analytical expressions used in CPESC hydraulic modeling across common geometric cross-sections:

Channel Cross-Section Area ( A A A ) Wetted Perimeter ( P P P ) Hydraulic Radius ( R R R ) Top Width ( T T T ) Hydraulic Depth ( D D D )

Rectangular ; (Bottom width b b b , depth y y y ) b × y b \times y b × y b + 2 y b + 2y b + 2 y b y b + 2 y \frac{b y}{b + 2y} b + 2 y b y ​ b b b y y y

Trapezoidal ; (Bottom b b b , side slopes z : 1 z:1 z : 1 ) ( b + z y ) y (b + z y) y ( b + zy ) y b + 2 y 1 + z 2 b + 2y \sqrt{1 + z^2} b + 2 y 1 + z 2 ​ ( b + z y ) y b + 2 y 1 + z 2 \frac{(b + z y) y}{b + 2y \sqrt{1 + z^2}} b + 2 y 1 + z 2 ​ ( b + zy ) y ​ b + 2 z y b + 2 z y b + 2 zy ( b + z y ) y b + 2 z y \frac{(b + z y) y}{b + 2 z y} b + 2 zy ( b + zy ) y ​

Triangular (V-Notch) ; (Side slopes z : 1 z:1 z : 1 ) z y 2 z y^2 z y 2 2 y 1 + z 2 2y \sqrt{1 + z^2} 2 y 1 + z 2 ​ z y 2 1 + z 2 \frac{z y}{2 \sqrt{1 + z^2}} 2 1 + z 2 ​ zy ​ 2 z y 2 z y 2 zy y 2 \frac{y}{2} 2 y ​

Parabolic ; (Top width T T T , depth y y y ) 2 3 T y \frac{2}{3} T y 3 2 ​ T y T + 8 y 2 3 T T + \frac{8 y^2}{3 T} T + 3 T 8 y 2 ​ ; (for y / T ≤ 0.2 y/T \le 0.2 y / T ≤ 0.2 ) 2 T 2 y 3 T 2 + 8 y 2 \frac{2 T^2 y}{3 T^2 + 8 y^2} 3 T 2 + 8 y 2 2 T 2 y ​ 3 A 2 y \frac{3 A}{2 y} 2 y 3 A ​ 2 3 y \frac{2}{3} y 3 2 ​ y

Note on Trapezoidal Notation: In civil engineering convention, side slopes are expressed as horizontal-to-vertical ratio ( z : 1 z:1 z : 1 , meaning z z z units horizontal to 1 unit vertical). For example, a 2 : 1 2:1 2 : 1 side slope has z = 2.0 z = 2.0 z = 2.0 .

Manning's Roughness Coefficient ( n n n )

The roughness coefficient n n n represents the total integrated resistance offered by the channel bed and banks to fluid motion. Manning's n n n is not purely a material friction constant; it is influenced by multiple hydraulic and physical mechanisms.

Physical Determinants of Manning's n n n

Surface Roughness & Grain Size: The physical size and angularity of bed material grains ( d 50 d_{50} d 50 ​ ). Frictional resistance increases as grain diameter increases.

Channel Cross-Section Irregularity: Variations in channel shape, bottom dips, and gouges increase turbulence, raising the effective n n n -value.

Vegetation Density & Retardance: Flexible turfgrass, emergent sedges, and rigid woody vegetation exert substantial drag. In vegetated swales, the roughness coefficient varies dynamically with flow depth: when water is shallow and grass stands erect, n n n is exceptionally high ( n > 0.08 – 0.12 n > 0.08\text{–}0.12 n > 0.08 – 0.12 ); as flow depth and velocity increase, grass bends and submerges, flattening against the bed and reducing effective roughness ( n ≈ 0.035 – 0.045 n \approx 0.035\text{–}0.045 n ≈ 0.035 – 0.045 ).

Channel Meandering (Sinuosity): Curves and sharp bends create secondary spiral flow cells that consume hydraulic energy, increasing effective n n n by 5 % to 30 % 5\%\text{ to }30\% 5% to 30% .

Obstructions & Sediment Deposition: Boulders, fallen debris, roots, and localized sediment bars obstruct streamlines and increase turbulent losses.

Cowan's Formulative Method for Composite Roughness

Where complex natural channels must be evaluated, Cowan (1956) formulated a systematic additive procedure adopted by the USGS and NRCS: n = ( n 0 + n 1 + n 2 + n 3 + n 4 ) × m 5 n = (n_0 + n_1 + n_2 + n_3 + n_4) \times m_5 n = ( n 0 ​ + n 1 ​ + n 2 ​ + n 3 ​ + n 4 ​ ) × m 5 ​

Where:

n 0 n_0 n 0 ​ = Base material roughness (bare soil = 0.020 0.020 0.020 , rock = 0.025 0.025 0.025 , fine gravel = 0.024 0.024 0.024 )

  • n 1 n_1 n 1 ​ = Degree of surface irregularity ( 0.000 to 0.020 0.000\text{ to }0.020 0.000 to 0.020 )
  • n 2 n_2 n 2 ​ = Variations in channel cross-section ( 0.000 to 0.015 0.000\text{ to }0.015 0.000 to 0.015 )
  • n 3 n_3 n 3 ​ = Effect of obstructions ( 0.000 to 0.060 0.000\text{ to }0.060 0.000 to 0.060 )
  • n 4 n_4 n 4 ​ = Vegetative retardance class ( 0.005 to 0.100 0.005\text{ to }0.100 0.005 to 0.100 )

m 5 m_5 m 5 ​ = Meandering correction factor ( 1.00 for straight channels up to 1.30 for severe meandering 1.00\text{ for straight channels up to }1.30\text{ for severe meandering} 1.00 for straight channels up to 1.30 for severe meandering )

Design Values of Manning's n n n for CPESC Applications

Channel Lining / Material Description Typical Design Manning's n n n Practical Operating Notes

Smooth Finished Concrete / Smooth HDPE 0.012 − 0.015 0.012 - 0.015 0.012 − 0.015 High velocity; prone to supercritical flow; requires toe dissipators

Corrugated Metal Pipe (CMP) 0.022 − 0.026 0.022 - 0.026 0.022 − 0.026 Annular corrugations create substantial macro-roughness

Bare Excavated Earth: Smooth Clay / Loam 0.020 − 0.025 0.020 - 0.025 0.020 − 0.025 Easily scoured; restricted to low velocities ( V < 2.0 ft/s V < 2.0\text{ ft/s} V < 2.0 ft/s )

Bare Excavated Earth: Coarse Gravel / Cobble 0.025 − 0.035 0.025 - 0.035 0.025 − 0.035 Sized per particle distribution; bed armoring occurs over time

Temporary Rolled Erosion Control Blanket (RECB) 0.028 − 0.035 0.028 - 0.035 0.028 − 0.035 Straw, coconut, or excelsior matrix protecting underlying seedbed

Turf Reinforcement Mat (TRM - Unvegetated) 0.030 − 0.038 0.030 - 0.038 0.030 − 0.038 3D synthetic matrix before grass establishment

Mowed Turfgrass Swale (Height 3–4 inches) 0.030 − 0.040 0.030 - 0.040 0.030 − 0.040 Maintained roadside ditch; Retardance Class D

Un-Mowed Grass Swale (Height 6–12 inches) 0.040 − 0.070 0.040 - 0.070 0.040 − 0.070 Native grasses; Retardance Class C; standard design condition

Dense Tall Grass / Meadow (Height > 18 inches) 0.070 − 0.120 0.070 - 0.120 0.070 − 0.120 High flow resistance; Retardance Class B; prone to sediment settling

Rock Riprap ( d 50 = 6 inches d_{50} = 6\text{ inches} d 50 ​ = 6 inches ) 0.035 − 0.045 0.035 - 0.045 0.035 − 0.045 Rough boundary; computed via Anderson ( n = 0.0395 d 50 1 / 6 n = 0.0395 d_{50}^{1/6} n = 0.0395 d 50 1/6 ​ )

Rock Riprap ( d 50 = 12 inches d_{50} = 12\text{ inches} d 50 ​ = 12 inches ) 0.040 − 0.055 0.040 - 0.055 0.040 − 0.055 Heavy energy dissipation; substantial boundary turbulence

Natural Stream Channel: Brushy with Pools 0.080 − 0.140 0.080 - 0.140 0.080 − 0.140 High sinuosity, overhanging brush, and woody debris accumulations

Flow Regimes & The Froude Number ( F r Fr F r )

The Froude Number ( F r Fr F r ) is a dimensionless parameter that represents the ratio of inertial forces to gravitational forces within an open channel flow field. It governs the hydraulic state of the flow, dictates how surface disturbances propagate, and indicates whether catastrophic hydraulic jumps may occur.

Mathematical Definition F r = V g × D Fr = \frac{V}{\sqrt{g \times D}} F r = g × D ​ V ​

Where:

  • V V V = Mean cross-sectional flow velocity ( ft/s \text{ft/s} ft/s )
  • g g g = Gravitational acceleration constant ( 32.2 ft/s 2 32.2\text{ ft/s}^2 32.2 ft/s 2 )

D D D = Hydraulic depth ( ft \text{ft} ft ), defined as cross-sectional area divided by top width ( D = A / T D = A / T D = A / T )

g D = c \sqrt{g D} = c g D ​ = c = Wave celerity ( ft/s \text{ft/s} ft/s ), which is the speed at which a shallow gravity wave or ripple travels relative to the fluid ┌─── Fr < 1.0 : Subcritical (Tranquil, deep, slow; V < c)

  • │
  • Froude Number (Fr) ─┼─── Fr = 1.0 : Critical (Minimum energy head, unstable surface)
  • │
  • └─── Fr > 1.0 : Supercritical (Rapid, shallow, shooting; V > c)
  • The Three Hydraulic Flow Regimes

Subcritical Flow ( F r < 1.0 Fr < 1.0 F r < 1.0 ):

Physics: Inertial forces are subordinate to gravitational forces ( V < c V < c V < c ). Because fluid velocity is slower than wave celerity, surface waves and disturbances can travel upstream against the current.

Operational Behavior: Flow is deep, tranquil, and slow. The depth of flow at any point is governed by downstream controls (such as a culvert inlet, weir, drop structure, or receiving reservoir backwater).

Design Objective: Civil engineers design the vast majority of temporary diversion swales, roadside ditches, and grassed waterways to operate in the subcritical regime ( F r ≤ 0.80 Fr \le 0.80 F r ≤ 0.80 ) to avoid standing waves, high-velocity liner detachment, and uncontrolled bed erosion.

Critical Flow ( F r = 1.0 Fr = 1.0 F r = 1.0 ):

Physics: Flow velocity exactly matches the wave celerity ( V = c = g D V = c = \sqrt{g D} V = c = g D ​ ). Surface disturbances remain stationary, forming standing waves.

Energy Relationship: For a specified volumetric discharge ( Q Q Q ), critical flow corresponds to the absolute minimum specific energy head ( E = y + V 2 / 2 g E = y + V^2 / 2g E = y + V 2 /2 g ) capable of conveying that flow. Conversely, for a given specific energy head, critical flow conveys the maximum possible discharge.

Critical Depth ( y c y_c y c ​ ): The flow depth at F r = 1.0 Fr = 1.0 F r = 1.0 . In a rectangular channel, critical depth simplifies to y c = q 2 / g 3 y_c = \sqrt[3]{q^2 / g} y c ​ = 3 q 2 / g ​ , where q = Q / b q = Q / b q = Q / b is unit discharge. Critical flow is inherently unstable; minor bed irregularities cause severe water surface undulations.

Supercritical Flow ( F r > 1.0 Fr > 1.0 F r > 1.0 ):

Physics: Inertial forces dominate gravitational forces ( V > c V > c V > c ). Fluid moves faster than surface gravity waves, meaning disturbances cannot propagate upstream. Flow depth is governed entirely by upstream controls (such as a steep chute crest or sluice opening).

Operational Behavior: Flow is shallow, rapid, and shooting. Common on steep cut slopes, riprap chutes, and paved flumes.

Construction Hazards: Supercritical flow exerts immense tractive shear stress on channel liners. Furthermore, whenever supercritical flow encounters a downstream obstacle, a flatter slope, or an expanding cross-section, it cannot transition smoothly back to subcritical flow. Instead, it undergoes an abrupt, violent hydraulic jump .

The Hydraulic Jump Hazard

A hydraulic jump is a rapid, turbulent open channel phenomenon where supercritical flow ( F r 1 > 1.0 Fr_1 > 1.0 F r 1 ​ > 1.0 ) spontaneously transitions into subcritical flow ( F r 2 < 1.0 Fr_2 < 1.0 F r 2 ​ < 1.0 ). This transition involves massive internal turbulence, intense roller waves, air entrainment, and significant energy dissipation. On construction sites, an uncontrolled hydraulic jump inside an unlined or turf-lined swale creates severe standing waves that can overtop diversion dikes, gouge out the channel banks, and instantly tear rolled erosion control blankets from their anchoring staples. Downstream of steep chutes, an engineered energy dissipator (such as a riprap plunge pool or baffled stilling basin) must be provided to force and contain the hydraulic jump within an armored boundary.

Permissible Velocity vs. Maximum Permissible Shear Stress Method

Historically, civil engineers designed drainage channels using the permissible velocity method . In modern CPESC practice, this empirical approach has been superseded by the maximum permissible shear stress (tractive force) method established in FHWA Hydraulic Engineering Circular No. 15 (HEC-15).

Limitations of the Permissible Velocity Method

The permissible velocity method specifies a single maximum allowable mean velocity ( V a l l o w V_{allow} V a ll o w ​ ) for a given soil type or liner material (for example, stating that sandy loam channels should not exceed 2.0 ft/s 2.0\text{ ft/s} 2.0 ft/s ). While conceptually straightforward, this method suffers from a major physical deficiency: it fails to account for flow depth .

Hydrodynamic boundary drag is not dictated by mean velocity alone. A deep channel flowing at 3.0 ft/s 3.0\text{ ft/s} 3.0 ft/s exerts far greater erosive shear force on its bed than a very shallow sheet flow moving at 4.0 ft/s 4.0\text{ ft/s} 4.0 ft/s . Because the permissible velocity method treats all flow depths identically, it dangerously underestimates erosive forces in deep flows and over-designs shallow swales.

The Maximum Permissible Shear Stress (Tractive Force) Method

Under tractive force theory, channel stability is governed by the hydrodynamic drag force exerted by the moving fluid on the channel perimeter per unit surface area. The channel liner is deemed stable if the maximum shear stress generated by the design storm ( τ m a x \tau_{max} τ ma x ​ ) is less than or equal to the permissible shear stress ( τ a l l o w \tau_{allow} τ a ll o w ​ ) of the soil or lining: τ m a x ≤ τ a l l o w \tau_{max} \le \tau_{allow} τ ma x ​ ≤ τ a ll o w ​

Boundary Shear Stress Formulations

For a wide channel under steady uniform flow, the mean boundary shear stress ( τ 0 \tau_0 τ 0 ​ ) is: τ 0 = γ × R × S \tau_0 = \gamma \times R \times S τ 0 ​ = γ × R × S

Where:

  • τ 0 \tau_0 τ 0 ​ = Mean boundary shear stress ( lbs/ft 2 \text{lbs/ft}^2 lbs/ft 2 or psf)
  • γ \gamma γ = Unit weight of water ( 62.4 lbs/ft 3 62.4\text{ lbs/ft}^3 62.4 lbs/ft 3 )
  • R R R = Hydraulic radius ( ft \text{ft} ft )
  • S S S = Longitudinal energy slope or bed slope ( ft/ft \text{ft/ft} ft/ft )

In trapezoidal and rectangular channels, boundary shear stress is not distributed uniformly across the wetted perimeter. Shear stress peaks at the center of the bed and decreases along the side slopes:

Maximum Bed Shear Stress ( τ b e d \tau_{bed} τ b e d ​ ): τ b e d = γ × y × S \tau_{bed} = \gamma \times y \times S τ b e d ​ = γ × y × S

(Where y y y is maximum flow depth in feet)

Maximum Side Slope Shear Stress ( τ s i d e \tau_{side} τ s i d e ​ ): τ s i d e = K s i d e × γ × y × S \tau_{side} = K_{side} \times \gamma \times y \times S τ s i d e ​ = K s i d e ​ × γ × y × S

(Where K s i d e K_{side} K s i d e ​ is a side shear factor typically ranging from 0.75 to 0.78 0.75\text{ to }0.78 0.75 to 0.78 for standard trapezoidal channels with z ≥ 1.5 z \ge 1.5 z ≥ 1.5 )

Because soil particles on side slopes are also subjected to gravitational downhill forces, the allowable shear stress on side slopes is lower than on the channel bed. The side slope safety factor must be evaluated separately from the channel bed.

  • Comprehensive Worked Engineering Calculation
  • Problem Statement

A CPESC professional is designing a temporary trapezoidal drainage swale to convey stormwater runoff from an active 18-acre mass grading site. The channel must be sized for the 10-year design storm discharge of Q 10 = 28.5 cfs Q_{10} = 28.5\text{ cfs} Q 10 ​ = 28.5 cfs .

Preliminary site geometry establishes:

Bottom width ( b b b ): 3.0 ft 3.0\text{ ft} 3.0 ft

Side slopes ( z z z ): 2 : 1 2:1 2 : 1 ( z = 2.0 ft horizontal per 1.0 ft vertical z = 2.0\text{ ft horizontal per 1.0 ft vertical} z = 2.0 ft horizontal per 1.0 ft vertical )

Longitudinal bed slope ( S S S ): 0.015 ft/ft 0.015\text{ ft/ft} 0.015 ft/ft ( 1.5 % grade 1.5\%\text{ grade} 1.5% grade )

Specified channel liner: Advanced Turf Reinforcement Mat (TRM) with an unvegetated allowable shear stress of τ a l l o w = 2.50 psf \tau_{allow} = 2.50\text{ psf} τ a ll o w ​ = 2.50 psf and a design Manning's roughness of n = 0.035 n = 0.035 n = 0.035

The engineer must evaluate a trial flow depth of y = 1.25 ft y = 1.25\text{ ft} y = 1.25 ft to verify:

  • Cross-sectional Area ( A A A ), Wetted Perimeter ( P P P ), and Hydraulic Radius ( R R R );
  • Mean flow velocity ( V V V ) and volumetric flow capacity ( Q Q Q );
  • Top width ( T T T ), hydraulic depth ( D D D ), and Froude Number ( F r Fr F r );

Maximum bed shear stress ( τ b e d \tau_{bed} τ b e d ​ ) and maximum side shear stress ( τ s i d e \tau_{side} τ s i d e ​ ) compared to τ a l l o w \tau_{allow} τ a ll o w ​ .

Step 1: Geometric Elements Calculation Area: A = ( b + z y ) y = ( 3.0 ft + ( 2.0 × 1.25 ft ) ) × 1.25 ft = ( 3.0 + 2.50 ) × 1.25 = 5.50 × 1.25 = 6.875 ft 2 \text{Area: } A = (b + z y) y = (3.0\text{ ft} + (2.0 \times 1.25\text{ ft})) \times 1.25\text{ ft} = (3.0 + 2.50) \times 1.25 = 5.50 \times 1.25 = 6.875\text{ ft}^2 Area: A = ( b + zy ) y = ( 3.0 ft + ( 2.0 × 1.25 ft )) × 1.25 ft = ( 3.0 + 2.50 ) × 1.25 = 5.50 × 1.25 = 6.875 ft 2 Wetted Perimeter: P = b + 2 y 1 + z 2 = 3.0 + ( 2 × 1.25 ) 1 + 2.0 2 = 3.0 + 2.50 5 = 3.0 + 2.50 ( 2.23607 ) = 3.0 + 5.5902 = 8.590 ft \text{Wetted Perimeter: } P = b + 2 y \sqrt{1 + z^2} = 3.0 + (2 \times 1.25) \sqrt{1 + 2.0^2} = 3.0 + 2.50 \sqrt{5} = 3.0 + 2.50(2.23607) = 3.0 + 5.5902 = 8.590\text{ ft} Wetted Perimeter: P = b + 2 y 1 + z 2 ​ = 3.0 + ( 2 × 1.25 ) 1 + 2. 0 2 ​ = 3.0 + 2.50 5 ​ = 3.0 + 2.50 ( 2.23607 ) = 3.0 + 5.5902 = 8.590 ft Hydraulic Radius: R = A P = 6.875 ft 2 8.590 ft = 0.8003 ft \text{Hydraulic Radius: } R = \frac{A}{P} = \frac{6.875\text{ ft}^2}{8.590\text{ ft}} = 0.8003\text{ ft} Hydraulic Radius: R = P A ​ = 8.590 ft 6.875 ft 2 ​ = 0.8003 ft

Step 2: Velocity & Discharge Capacity via Manning's Equation R 2 / 3 = ( 0.8003 ) 0.6667 = 0.8619 R^{2/3} = (0.8003)^{0.6667} = 0.8619 R 2/3 = ( 0.8003 ) 0.6667 = 0.8619 S 1 / 2 = ( 0.015 ) 0.5 = 0.12247 S^{1/2} = (0.015)^{0.5} = 0.12247 S 1/2 = ( 0.015 ) 0.5 = 0.12247 V = 1.486 n × R 2 / 3 × S 1 / 2 = 1.486 0.035 × 0.8619 × 0.12247 V = \frac{1.486}{n} \times R^{2/3} \times S^{1/2} = \frac{1.486}{0.035} \times 0.8619 \times 0.12247 V = n 1.486 ​ × R 2/3 × S 1/2 = 0.035 1.486 ​ × 0.8619 × 0.12247 V = 42.4571 × 0.8619 × 0.12247 = 4.482 ft/s ≈ 4.48 ft/s V = 42.4571 \times 0.8619 \times 0.12247 = 4.482\text{ ft/s} \approx 4.48\text{ ft/s} V = 42.4571 × 0.8619 × 0.12247 = 4.482 ft/s ≈ 4.48 ft/s Q = V × A = 4.482 ft/s × 6.875 ft 2 = 30.81 cfs ≈ 30.8 cfs Q = V \times A = 4.482\text{ ft/s} \times 6.875\text{ ft}^2 = 30.81\text{ cfs} \approx 30.8\text{ cfs} Q = V × A = 4.482 ft/s × 6.875 ft 2 = 30.81 cfs ≈ 30.8 cfs

Hydraulic Capacity Evaluation: Calculated capacity ( 30.8 cfs 30.8\text{ cfs} 30.8 cfs ) exceeds the design requirement ( Q 10 = 28.5 cfs Q_{10} = 28.5\text{ cfs} Q 10 ​ = 28.5 cfs ), providing adequate conveyance capacity.

Step 3: Flow Regime & Froude Number Evaluation Top Width: T = b + 2 z y = 3.0 + ( 2 × 2.0 × 1.25 ) = 3.0 + 5.0 = 8.0 ft \text{Top Width: } T = b + 2 z y = 3.0 + (2 \times 2.0 \times 1.25) = 3.0 + 5.0 = 8.0\text{ ft} Top Width: T = b + 2 zy = 3.0 + ( 2 × 2.0 × 1.25 ) = 3.0 + 5.0 = 8.0 ft Hydraulic Depth: D = A T = 6.875 ft 2 8.0 ft = 0.8594 ft \text{Hydraulic Depth: } D = \frac{A}{T} = \frac{6.875\text{ ft}^2}{8.0\text{ ft}} = 0.8594\text{ ft} Hydraulic Depth: D = T A ​ = 8.0 ft 6.875 ft 2 ​ = 0.8594 ft Wave Celerity: c = g × D = 32.2 ft/s 2 × 0.8594 ft = 27.673 = 5.260 ft/s \text{Wave Celerity: } c = \sqrt{g \times D} = \sqrt{32.2\text{ ft/s}^2 \times 0.8594\text{ ft}} = \sqrt{27.673} = 5.260\text{ ft/s} Wave Celerity: c = g × D ​ = 32.2 ft/s 2 × 0.8594 ft ​ = 27.673 ​ = 5.260 ft/s F r = V c = 4.482 ft/s 5.260 ft/s = 0.852 Fr = \frac{V}{c} = \frac{4.482\text{ ft/s}}{5.260\text{ ft/s}} = 0.852 F r = c V ​ = 5.260 ft/s 4.482 ft/s ​ = 0.852

Flow Regime Evaluation: Because F r = 0.852 < 1.0 Fr = 0.852 < 1.0 F r = 0.852 < 1.0 , flow is in the subcritical regime . Disturbances can travel upstream, and the channel will not generate spontaneous destructive hydraulic jumps during uniform flow conditions.

Step 4: Tractive Force & Shear Stress Stability Analysis τ b e d = γ × y × S = 62.4 lbs/ft 3 × 1.25 ft × 0.015 ft/ft = 1.170 lbs/ft 2 (psf) \tau_{bed} = \gamma \times y \times S = 62.4\text{ lbs/ft}^3 \times 1.25\text{ ft} \times 0.015\text{ ft/ft} = 1.170\text{ lbs/ft}^2 \text{ (psf)} τ b e d ​ = γ × y × S = 62.4 lbs/ft 3 × 1.25 ft × 0.015 ft/ft = 1.170 lbs/ft 2 (psf) τ s i d e ≈ 0.76 × τ b e d = 0.76 × 1.170 psf = 0.889 lbs/ft 2 (psf) \tau_{side} \approx 0.76 \times \tau_{bed} = 0.76 \times 1.170\text{ psf} = 0.889\text{ lbs/ft}^2 \text{ (psf)} τ s i d e ​ ≈ 0.76 × τ b e d ​ = 0.76 × 1.170 psf = 0.889 lbs/ft 2 (psf) Factor of Safety (Bed): F S b e d = τ a l l o w τ b e d = 2.50 psf 1.170 psf = 2.14 \text{Factor of Safety (Bed): } FS_{bed} = \frac{\tau_{allow}}{\tau_{bed}} = \frac{2.50\text{ psf}}{1.170\text{ psf}} = 2.14 Factor of Safety (Bed): F S b e d ​ = τ b e d ​ τ a ll o w ​ ​ = 1.170 psf 2.50 psf ​ = 2.14

Design Verification: The maximum bed shear stress of 1.17 psf 1.17\text{ psf} 1.17 psf is well below the TRM allowable limit of 2.50 psf 2.50\text{ psf} 2.50 psf ( F S = 2.14 > 1.30 FS = 2.14 > 1.30 FS = 2.14 > 1.30 ). The channel configuration and lining are hydraulically and structurally stable.

Loading diagram... Open Channel Energy Profiles, Hydraulic Gradients, and Flow Regimes