Study guide

6.1 Hydrologic Cycle, Runoff Generation & Time of Concentration

Certified Professional in Erosion and Sediment Control CPESC

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Rules, Regulations & Clean Water Act Framework

1.1 Federal Clean Water Act & NPDES Regulatory Framework 1.2 Construction General Permit (CGP), NOI/NOT & State/Local Jurisdiction 1.3 CWA Sections 401, 404 & Specialized Environmental Laws

2 Chapter 2: Site Assessment, Watershed Delineation & Resource Inventory

2.1 Topographic Analysis, Drainage Areas & Watershed Delineation 2.2 Soil Identification, NRCS Soil Surveys & Hydrologic Soil Groups 2.3 Environmental Site Constraints, Receiving Waters & Sensitive Areas

3 Chapter 3: Site Planning, Construction Sequencing & Hazard Management

3.1 Land Disturbance Minimization & Construction Phasing 3.2 Construction Scheduling, Seasonal Windows & Buffer Zones 3.3 Site Hazard Identification & Clearing/Grading Limits

4 Chapter 4: Soil Erosion Mechanics & Types

4.1 Fundamentals of Erosion & the Sedimentation Cycle 4.2 Mechanics of Water Erosion: Splash, Sheet, Rill & Gully 4.3 Channel, Stream Bank, Shoreline & Wind Erosion

5 Chapter 5: Soil Loss Prediction: USLE, RUSLE & MUSLE

5.1 Universal Soil Loss Equation (USLE/RUSLE) Overview & R-Factor 5.2 Soil Erodibility Factor (K) & Topographic Factor (LS) 5.3 Cover Management Factor (C) & Support Practice Factor (P) 5.4 Modified USLE (MUSLE) & Single-Storm Sediment Yield

6 Chapter 6: Runoff Hydrology & Watershed Modeling

6.1 Hydrologic Cycle, Runoff Generation & Time of Concentration 6.2 The Rational Method (Q = CiA) & Peak Runoff Estimation 6.3 NRCS (SCS) Curve Number Method & Runoff Volume Estimation

7 Chapter 7: Runoff Conveyance & Open Channel Hydraulics

7.1 Manning's Equation & Open Channel Flow Hydraulics 7.2 Temporary Diversion Dikes, Berms & Swales 7.3 Grade Stabilization Structures, Check Dams & Flumes

8 Chapter 8: Soil Preparation, Fertility & Revegetation

8.1 Soil Testing, pH Adjustment & Nutrient Management (N-P-K) 8.2 Soil Amendments, Compost Incorporation & Seedbed Preparation 8.3 Plant Selection: Native vs. Non-Native, Turf vs. Woody, Cool vs. Warm Season 8.4 Seeding Methods, Nurse Crops & Hydroseeding Application

9 Chapter 9: Mulching & Rolled Erosion Control Products (RECPs)

9.1 Mulch Types, Hydraulic Mulches & Bonded Fiber Matrices (BFMs) 9.2 Rolled Erosion Control Products (RECPs): Temporary ECBs 9.3 Turf Reinforcement Mats (TRMs) & Permanent Vegetative Armoring 9.4 Hard Armoring: Riprap, Gabions, Articulated Concrete & Cellular Confinement

10 Chapter 10: Perimeter Sediment Barriers & Filtration Controls

10.1 Silt Fence Design, Trenching, Installation & Maintenance 10.2 Vegetative Buffer Strips, Compost Filter Socks & Fiber Rolls (Wattles) 10.3 Gravel Bag Berms, Sandbag Barriers & Brush Barriers

11 Chapter 11: Storm Drain Inlet Protection & Slope Drains

11.1 Drop Inlet Protection: Silt Fence, Wire Mesh & Manufactured Inserts 11.2 Curb Inlet Protection: Gravel Berms, Filter Socks & Foam Inserts 11.3 Temporary & Permanent Pipe Slope Drains and Subsurface Drains

12 Chapter 12: Sediment Traps, Basins & Active Treatment

12.1 Sediment Traps: Design Criteria, Sizing & Maintenance 12.2 Sediment Basins: Sizing (Volume & Surface Area), Length-to-Width Ratio 12.3 Basin Outflow Structures: Skimmers, Perforated Risers & Baffles 12.4 Chemical Treatment, Flocculants (PAM/Chitosan) & Jar Testing

13 Chapter 13: Non-Sediment Pollution Prevention & Good Housekeeping

13.1 Construction Site Dewatering Operations & Filtration 13.2 Concrete Washout, Masonry & Mortar Waste Management 13.3 Fuels, Petroleum, Hazardous Chemicals & Spill Response 13.4 Stabilized Construction Entrances, Tire Washes & Dust Control

14 Chapter 14: SWPPP Administration, Site Inspections & Ethics

14.1 SWPPP Elements, Site Maps & Plan Amendments 14.2 Construction Inspection Protocols, Schedules & Documentation 14.3 Turbidity Monitoring, Discharge Sampling & Corrective Action Logs 14.4 Field Education, Subcontractor Oversight & CPESC Code of Ethics

6.1 Hydrologic Cycle, Runoff Generation & Time of Concentration

Key Takeaways Explain This Topic AI

Vegetation clearing, topsoil stripping, and grading eliminate canopy interception and surface depression storage, converting natural precipitation into nearly instantaneous surface runoff.

Heavy earthmoving equipment crushes soil macropores and drives dry bulk density to > 1.65–1.75 g/cm³, transforming permeable Hydrologic Soil Group A and B soils into functionally impermeable Group D hydrologic regimes.

Design storms are statistically characterized by return periods (T = 1/P) and rainfall durations, with NOAA Atlas 14 providing localized precipitation frequency data for sizing sediment basins and conveyances.

Time of Concentration (Tc) is the travel time from the hydraulically most remote point in the watershed to the design discharge point, calculated as the sum of sheet flow, shallow concentrated flow, and open channel flow.

Under modern NRCS TR-55 standards, overland sheet flow travel length is strictly capped at a maximum of 100 feet across disturbed soils before transitioning into shallow concentrated flow.

Last updated: September 2026

6.1 Hydrologic Cycle, Runoff Generation & Time of Concentration

Quick Reference: Site clearing, mass grading, and heavy equipment traffic drastically disrupt the natural hydrologic cycle . By stripping vegetative canopies, eliminating duff layers, and compacting mineral soils to bulk densities exceeding 1.65–1.75 g/cm³ , construction activities transform permeable soils into near-impervious surfaces. Under NRCS TR-55 , Time of Concentration ( T c T_c T c ​ ) is modeled across three distinct flow regimes: sheet flow (strictly capped at 100 feet ), shallow concentrated flow , and open channel flow . Shortened flow paths and reduced surface roughness accelerate runoff delivery, yielding higher peak discharges ( Q p e a k Q_{peak} Q p e ak ​ ) and earlier hydrograph peaks.

Construction Site Hydrology & Water Balance Fundamentals

The terrestrial hydrologic cycle describes the continuous movement, transformation, and storage of water across atmospheric, surface, and subterranean realms. Under undisturbed, natural conditions (such as mature forests, native prairies, or undisturbed rangelands), the hydrologic water balance is governed by complex biological and physical buffers that attenuate runoff generation: P = Q + f + I n t + S d + E T P = Q + f + I_{nt} + S_d + ET P = Q + f + I n t ​ + S d ​ + ET

Where:

  • P P P = Gross precipitation (depth or volume)
  • Q Q Q = Surface runoff
  • f f f = Infiltration into the soil profile
  • I n t I_{nt} I n t ​ = Interception by vegetative canopy and leaf litter
  • S d S_d S d ​ = Surface depression storage (ponding in micro-topography)
  • E T ET ET = Evapotranspiration (evaporation from soil/water surfaces plus plant transpiration)
  • The Impact of Land Disturbance on Hydrologic Partitioning

When a construction site is cleared, grubbed, and mass graded, this natural hydrologic equilibrium is completely destabilized:

Elimination of Vegetative Interception ( I n t I_{nt} I n t ​ ): Mature deciduous or coniferous forests intercept 10% to 35% of gross annual precipitation within their multi-layered canopies. Well-developed forest duff and organic leaf litter absorb an additional 5% to 15% of rainfall before moisture ever contacts the mineral soil. Stripping this vegetation removes this physical cushion entirely, exposing bare mineral particles to direct raindrop kinetic energy.

Destruction of Depression Storage ( S d S_d S d ​ ): Natural hummocky terrain, root throw hollows, fallen woody debris, and micro-topographic hollows store significant runoff volumes ( 0.1 to 0.5 inches 0.1\text{ to }0.5\text{ inches} 0.1 to 0.5 inches across undisturbed catchments). Grading operations smooth the land surface into uniform, engineered planes, reducing surface depression storage to near zero.

Collapse of Infiltration Capacity ( f f f ): As root systems die and soil macropores are mechanically collapsed by earthmoving equipment, the rate and volume of water penetrating the soil matrix plummet.

Amplification of Surface Runoff ( Q Q Q ): Because precipitation cannot be stored in depressions, intercepted by foliage, or absorbed into the subsoil, the excess water is instantaneously partitioned into direct overland surface runoff. On a per-acre basis, a graded construction site frequently generates two to five times the volume of surface runoff compared to its pre-disturbance baseline.

Infiltration Mechanics & Heavy Equipment Compaction

Infiltration is the physical process by which water on the ground surface enters the soil under the combined forces of gravity and matric suction (capillarity). The rate at which a given soil absorbs water is its infiltration rate ( f f f , typically expressed in inches per hour or millimeters per hour). The theoretical maximum rate at which water can enter the soil at any given instant is termed the infiltration capacity ( f p f_p f p ​ ).

Horton's Infiltration Equation

Robert E. Horton established that when rainfall intensity ( I I I ) exceeds infiltration capacity ( f p f_p f p ​ ), the infiltration rate decays exponentially over time from a high initial rate ( f 0 f_0 f 0 ​ ) to a constant, steady-state minimum rate ( f c f_c f c ​ ): f ( t ) = f c + ( f 0 − f c ) e − k t f(t) = f_c + (f_0 - f_c) e^{-kt} f ( t ) = f c ​ + ( f 0 ​ − f c ​ ) e − k t

Where:

  • f ( t ) f(t) f ( t ) = Infiltration capacity at time t t t from the beginning of rainfall (in/hr)
  • f 0 f_0 f 0 ​ = Initial infiltration capacity of dry soil (in/hr)

f c f_c f c ​ = Ultimate steady-state infiltration capacity, asymptotically approaching the saturated hydraulic conductivity ( K s a t K_{sat} K s a t ​ ) of the soil profile (in/hr)

k k k = Decay constant dependent on soil texture, structure, and vegetation density ( hr − 1 \text{hr}^{-1} hr − 1 )

  • t t t = Elapsed time from rainfall onset (hr)
  • e e e = Base of the natural logarithm ( ≈ 2.71828 \approx 2.71828 ≈ 2.71828 )

In undisturbed natural soils, f 0 f_0 f 0 ​ is exceptionally high due to open surface pores, worm burrows, decayed root conduits, and loose organic duff. As the soil matrix saturates, clay minerals swell, capillary suction gradients diminish, and capillary menisci flatten, causing infiltration to stabilize at f c f_c f c ​ .

The Physics of Mechanical Compaction on Construction Sites

During earthmoving, mass grading, cut-and-fill operations, and utility installation, construction equipment exerts massive compressive and shearing stresses on the soil. Heavy scrapers (such as a Caterpillar 631, weighing over 100 , 000 lbs 100,000\text{ lbs} 100 , 000 lbs loaded), tri-axle haul trucks, and vibratory smooth-drum compactors generate contact pressures exceeding 40 to 80 pounds per square inch (psi) 40\text{ to }80\text{ pounds per square inch (psi)} 40 to 80 pounds per square inch (psi) .

This mechanical loading has devastating consequences for soil physics:

Macropore Obliteration: Soil porosity consists of micropores ( < 75 μ m < 75\ \mu\text{m} < 75 μ m , which hold capillary water) and macropores ( > 75 μ m > 75\ \mu\text{m} > 75 μ m , which facilitate rapid gravitational drainage and aeration). Heavy axle loads compress and destroy the structural macropores, collapsing the soil aggregate structure.

Elevation of Dry Bulk Density ( D b D_b D b ​ ): Bulk density is defined as the dry mass of soil solids divided by the total soil volume ( D b = M s / V t D_b = M_s / V_t D b ​ = M s ​ / V t ​ , in g/cm 3 \text{g/cm}^3 g/cm 3 ). Undisturbed topsoils typically maintain bulk densities of 1.10 to 1.35 g/cm 3 1.10\text{ to }1.35\text{ g/cm}^3 1.10 to 1.35 g/cm 3 , with total porosities of 50 % to 60 % 50\%\text{ to }60\% 50% to 60% . Construction grading and repeated equipment passes elevate dry bulk density to > 1.65 – 1.85 g/cm 3 > 1.65\text{–}1.85\text{ g/cm}^3 > 1.65 – 1.85 g/cm 3 , reducing total porosity to below 30 % 30\% 30% and virtually eliminating macroporosity.

Bulk Density Root-Limiting Thresholds: At bulk densities exceeding 1.60 g/cm 3 1.60\text{ g/cm}^3 1.60 g/cm 3 in clays and 1.75 g/cm 3 1.75\text{ g/cm}^3 1.75 g/cm 3 in sands, soil mechanical resistance physically halts plant root elongation, making post-construction revegetation extremely difficult without deep mechanical subsoiling or ripping.

Hydrologic Soil Group (HSG) Downgrade: In native conditions, sandy and coarse loamy soils are classified under NRCS standards as Hydrologic Soil Group A or B , exhibiting steady-state infiltration capacities ( f c f_c f c ​ ) of 0.30 to > 1.0 in/hr 0.30\text{ to }> 1.0\text{ in/hr} 0.30 to > 1.0 in/hr . Once graded and trafficked by heavy machinery, these soils suffer a functional downgrade, behaving hydrologically as Group D soils (clays or shallow hardpans) with steady-state infiltration rates dropping below 0.05 – 0.10 in/hr 0.05\text{–}0.10\text{ in/hr} 0.05 – 0.10 in/hr .

Soil Disturbance State Typical Dry Bulk Density ( D b D_b D b ​ ) Total Porosity ( n n n ) Steady-State Infiltration ( f c f_c f c ​ ) Functional Hydrologic Soil Group (HSG)

Undisturbed Native Forest 1.05 − 1.25 g/cm 3 1.05 - 1.25\text{ g/cm}^3 1.05 − 1.25 g/cm 3 53 % − 60 % 53\% - 60\% 53% − 60% 1.50 − 5.00 + in/hr 1.50 - 5.00+\text{ in/hr} 1.50 − 5.00 + in/hr Group A / B

Undisturbed Pasture / Turf 1.20 − 1.35 g/cm 3 1.20 - 1.35\text{ g/cm}^3 1.20 − 1.35 g/cm 3 49 % − 55 % 49\% - 55\% 49% − 55% 0.50 − 1.50 in/hr 0.50 - 1.50\text{ in/hr} 0.50 − 1.50 in/hr Group B

Graded Topsoil (Light Traffic) 1.40 − 1.55 g/cm 3 1.40 - 1.55\text{ g/cm}^3 1.40 − 1.55 g/cm 3 41 % − 47 % 41\% - 47\% 41% − 47% 0.15 − 0.30 in/hr 0.15 - 0.30\text{ in/hr} 0.15 − 0.30 in/hr Group C

Compacted Subgrade / Haul Road > 1.65 − 1.85 g/cm 3 > 1.65 - 1.85\text{ g/cm}^3 > 1.65 − 1.85 g/cm 3 28 % − 35 % 28\% - 35\% 28% − 35% < 0.05 − 0.10 in/hr < 0.05 - 0.10\text{ in/hr} < 0.05 − 0.10 in/hr Group D (Hydrologically Impervious)

Design Storm Frequency, Duration & NOAA Atlas 14

Civil and environmental engineers do not design temporary erosion and sediment control (ESC) practices for the largest imaginable meteorological event; rather, practices are designed for specific design storms defined by their statistical frequency and duration.

Return Period and Exceedance Probability

The return period (or recurrence interval , T T T ) represents the average time interval, in years, between storm events that equal or exceed a specified magnitude. The annual exceedance probability ( P e P_e P e ​ ) is the reciprocal of the return period: P e = 1 T P_e = \frac{1}{T} P e ​ = T 1 ​

2-Year Storm ( T = 2 yr T = 2\text{ yr} T = 2 yr ): P e = 1 / 2 = 0.50 P_e = 1/2 = 0.50 P e ​ = 1/2 = 0.50 (a 50% probability of occurring in any given single calendar year). Under federal and state Construction General Permits (CGPs), the 2-year, 24-hour storm is the universal regulatory standard for sizing temporary sediment basins, sediment traps, and basic perimeter sediment controls.

10-Year Storm ( T = 10 yr T = 10\text{ yr} T = 10 yr ): P e = 1 / 10 = 0.10 P_e = 1/10 = 0.10 P e ​ = 1/10 = 0.10 (a 10% probability in any given year). This storm is the standard design benchmark for sizing temporary diversion swales, earthen berms, riprap-lined channels, and culvert crossings designed to protect active construction work areas.

25-Year Storm ( T = 25 yr T = 25\text{ yr} T = 25 yr ): P e = 1 / 25 = 0.04 P_e = 1/25 = 0.04 P e ​ = 1/25 = 0.04 (a 4% probability in any given year). Frequently specified for sizing permanent drainage infrastructure, bypass channels, and intermediate culvert crossings on linear highway projects.

100-Year Storm ( T = 100 yr T = 100\text{ yr} T = 100 yr ): P e = 1 / 100 = 0.01 P_e = 1/100 = 0.01 P e ​ = 1/100 = 0.01 (a 1% probability in any given year). Used to evaluate floodplain encroachment, dam breach analyses, and the hydraulic stability of permanent emergency spillways on major retention embankments.

Precipitation Frequency Sources: NOAA Atlas 14

Historically, engineering hydrologists relied on the United States Weather Bureau's Technical Paper No. 40 (TP-40) , published in 1961, and Hydro-35 (1977). However, these legacy publications utilized limited periods of record (frequently fewer than 40 years of historical data) and broad, generalized national contours that failed to account for regional microclimates and modern precipitation trends.

Today, the national standard is the National Oceanic and Atmospheric Administration (NOAA) Atlas 14: Precipitation-Frequency Atlas of the United States , accessible via the online Precipitation Frequency Data Server (PFDS) . NOAA Atlas 14 utilizes extensive, quality-controlled gauge records spanning over a century, employing advanced L-moment statistical algorithms to generate localized Depth-Duration-Frequency (DDF) and Intensity-Duration-Frequency (IDF) estimates with 90% confidence intervals based on exact site latitude and longitude coordinates.

Time of Concentration ( T c T_c T c ​ ): Fundamentals & Physical Principles

The Time of Concentration ( T c T_c T c ​ ) is one of the most critical parameters in engineering hydrology. It directly dictates the peak discharge rate ( Q p e a k Q_{peak} Q p e ak ​ ) calculated in both the Rational Method and the NRCS Curve Number method.

Formal Engineering Definition

Time of Concentration ( T c T_c T c ​ ): The time required for water to travel from the hydraulically most remote point within a contributing watershed to the point of interest, design cross-section, or discharge outfall.

It is imperative to recognize that the "hydraulically most remote point" is not necessarily the point of greatest geometric or straight-line physical distance . Rather, it is the point in the watershed from which runoff takes the longest travel time to reach the outlet. A flat, densely vegetated upland plateau located 500 feet from an outfall may have a significantly longer hydraulic travel time than a smooth, paved parking lot located 1,500 feet away via an engineered concrete swale.

The Impact of Land Disturbance on Hydrograph Response

When a site undergoes clearing, contouring, and grading, T c T_c T c ​ is dramatically reduced:

Dense grass or woodland canopy ( n = 0.15 – 0.80 n = 0.15\text{–}0.80 n = 0.15 – 0.80 ) is replaced with smooth, bare earth or aggregate ( n = 0.011 – 0.05 n = 0.011\text{–}0.05 n = 0.011 – 0.05 ).

Broad overland sheet flow pathways are intercepted by steep cut slopes and graded swales.

Natural depressions and meandering flow paths are replaced by straight, engineered ditches.

A shortened Time of Concentration causes the entire watershed to contribute runoff to the outfall much faster. When rainfall intensity is evaluated at this shorter duration, the resulting design rainfall intensity ( I I I ) is substantially higher. Consequently, post-disturbance hydrographs exhibit:

  • A sharper, steeper rising limb ;
  • A drastically elevated peak discharge rate ( Q p e a k Q_{peak} Q p e ak ​ ) ;
  • An earlier time to peak ( t p t_p t p ​ ) ; and

A flashy, high-energy hydrologic regime that causes severe scouring of receiving channels and overwhelms undersized sediment traps.

NRCS TR-55 Three-Component Flow Method

In 1986, the USDA Natural Resources Conservation Service (NRCS, formerly the Soil Conservation Service [SCS]) published Technical Release 55: Urban Hydrology for Small Watersheds (TR-55) . TR-55 established the industry-standard methodology for calculating Time of Concentration by dividing the hydraulic flow path into three discrete consecutive flow regimes: T c = T t 1 + T t 2 + T t 3 T_c = T_{t1} + T_{t2} + T_{t3} T c ​ = T t 1 ​ + T t 2 ​ + T t 3 ​

Where:

  • T t 1 T_{t1} T t 1 ​ = Travel time for sheet flow (hours)
  • T t 2 T_{t2} T t 2 ​ = Travel time for shallow concentrated flow (hours)

T t 3 T_{t3} T t 3 ​ = Travel time for open channel flow (hours) Drainage Divide ──[ Sheet Flow (≤ 100 ft) ]──► [ Shallow Concentrated Flow ]──► [ Open Channel Flow ]──► Outfall

Component 1: Sheet Flow ( T t 1 T_{t1} T t 1 ​ )

Sheet flow is very shallow, broad overland runoff moving over planar terrain at uniform depths typically less than 0.1 foot 0.1\text{ foot} 0.1 foot (frequently only a few millimeters). Flow is primarily laminar or micro-turbulent, governed heavily by surface friction and viscous drag against ground debris and vegetative stems.

TR-55 calculates sheet flow travel time using Manning's Kinematic Wave Formulation : T t 1 = 0.007 × ( n × L ) 0.8 ( P 2 ) 0.5 × S 0.4 T_{t1} = \frac{0.007 \times (n \times L)^{0.8}}{(P_2)^{0.5} \times S^{0.4}} T t 1 ​ = ( P 2 ​ ) 0.5 × S 0.4 0.007 × ( n × L ) 0.8 ​

Where:

  • T t 1 T_{t1} T t 1 ​ = Sheet flow travel time (hours)
  • n n n = Manning's roughness coefficient for sheet flow (dimensionless)
  • L L L = Sheet flow length (feet)
  • P 2 P_2 P 2 ​ = 2-year, 24-hour design rainfall depth (inches, obtained from NOAA Atlas 14)
  • S S S = Land slope along the flow path (ft/ft, decimal format)

The Strict 100-Foot Rule: In earlier hydrologic handbooks (including the original 1975 edition of TR-55), engineers were permitted to assume sheet flow lengths up to 300 feet. However, extensive field research demonstrated that under real-world conditions—especially on disturbed construction sites—micro-topographic irregularities, wheel ruts, and subtle grade breaks inevitably force sheet flow to coalesce into distinct micro-rills well before reaching 100 feet. Consequently, NRCS TR-55 strictly caps the maximum permissible sheet flow length at 100 feet (30.5 meters) . Modeling sheet flow lengths greater than 100 feet artificially inflates T c T_c T c ​ , unrealistically suppresses calculated peak discharge rates, and results in dangerously undersized sediment basins and conveyance structures.

Component 2: Shallow Concentrated Flow ( T t 2 T_{t2} T t 2 ​ )

After a maximum of 100 feet, overland sheet flow naturally converges into micro-channels, rills, and shallow swales with flow depths ranging from 0.1 to 0.5 feet 0.1\text{ to }0.5\text{ feet} 0.1 to 0.5 feet . In this regime, viscous surface tension is overcome, and flow becomes fully turbulent.

The average velocity of shallow concentrated flow is calculated using empirical relationships derived from the TR-55 velocity nomographs, expressed as: V = k × S 0.5 V = k \times S^{0.5} V = k × S 0.5

Where:

  • V V V = Average velocity (ft/s)
  • S S S = Slope along the flow path (ft/ft)

k k k = Surface roughness velocity factor:

  • For Unpaved surfaces (bare soil, pasture, gravel, cultivated fields): k = 16.1345 k = 16.1345 k = 16.1345
  • For Paved surfaces (asphalt, concrete, clean paved gutters): k = 20.3282 k = 20.3282 k = 20.3282

Once the velocity V V V is determined, travel time T t 2 T_{t2} T t 2 ​ is calculated by dividing flow path length L L L by velocity: T t 2 = L 3600 × V T_{t2} = \frac{L}{3600 \times V} T t 2 ​ = 3600 × V L ​

Where L L L is the length of shallow concentrated flow in feet, V V V is velocity in ft/s, and 3600 3600 3600 is the conversion factor from seconds to hours.

Component 3: Open Channel Flow ( T t 3 T_{t3} T t 3 ​ )

When runoff accumulates into clearly defined, engineered, or natural conveyances—such as roadside ditches, trapezoidal diversion swales, riprap channels, culverts, or natural ravines—open channel hydraulics apply. Flow velocities are modeled using Manning's Equation for steady, uniform open channel flow: V = 1.486 n × R 2 / 3 × S 1 / 2 V = \frac{1.486}{n} \times R^{2/3} \times S^{1/2} V = n 1.486 ​ × R 2/3 × S 1/2

Where:

  • V V V = Mean cross-sectional flow velocity (ft/s)
  • n n n = Manning's roughness coefficient for open channel flow

R R R = Hydraulic radius (ft), defined as cross-sectional flow area ( A A A , in ft 2 \text{ft}^2 ft 2 ) divided by wetted perimeter ( P w P_w P w ​ , in ft \text{ft} ft ): R = A / P w R = A / P_w R = A / P w ​

S S S = Longitudinal channel bed slope (ft/ft)

Travel time for open channel flow is calculated identically: T t 3 = L 3600 × V T_{t3} = \frac{L}{3600 \times V} T t 3 ​ = 3600 × V L ​

Where L L L is channel flow length in feet and V V V is mean velocity in ft/s.

Manning's Roughness Coefficient ( n n n ) for Sheet Flow

It is vital for the CPESC practitioner to recognize that Manning's roughness coefficient for sheet flow ( n n n ) is fundamentally different from Manning's n n n for open channel flow . In sheet flow, because the water column is microscopic (fractions of an inch), individual soil aggregates, gravel pebbles, grass blades, and plant stems exert enormous frictional resistance relative to the flow depth. Therefore, sheet flow n n n -values are an order of magnitude higher than open channel values:

Surface Description / Land Cover Sheet Flow Manning's Roughness ( n n n ) Open Channel Manning's Roughness ( n n n )

  • Smooth Surfaces (Concrete, Asphalt, Bare Compacted Soil) 0.011 0.011 – 0.013
  • Fallow (Bare Soil, No Residue Cover) 0.050 0.020 – 0.025
  • Cultivated Soils (Residue Cover ≤ 20 % \le 20\% ≤ 20% ) 0.060 0.025 – 0.030
  • Cultivated Soils (Residue Cover > 20 % > 20\% > 20% ) 0.170 0.030 – 0.035
  • Short Grass Prairie / Maintained Lawns 0.150 0.035 – 0.040
  • Dense Tall Grasses (Weeping Lovegrass, Bluegrass) 0.240 0.050 – 0.070
  • Bermudagrass (Dense Native Sod) 0.410 0.060 – 0.090
  • Woods (Light Underbrush and Leaf Litter) 0.400 0.080 – 0.120
  • Woods (Dense Underbrush, Deep Duff) 0.800 0.120 – 0.160

Loading diagram... TR-55 Time of Concentration Flow Regimes and Hydraulic Transitions