Study guide

9.2 BTPS, STPD, and ATPS Conversion Formulas and Calculations

Certified Pulmonary Function Technologist CPFT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Overview & NBRC Certification Requirements

1.1 NBRC PFT Exam Logistics, Format, and Scoring Criteria 1.2 Scope of Practice, Candidate Admission Pathways, and Credential Maintenance 1.3 Professional Standards, Ethics, and Patient Safety in Diagnostic Testing

2 Chapter 2: Spirometry Equipment & Sensors

2.1 Volume-Displacement Spirometers: Water-Seal, Rolling-Seal, Bellows 2.2 Flow-Sensing Pneumotachometers: Fleisch, Lilly, Vortex, Turbine, Pitot Tube, Ultrasonic 2.3 Calibration Standards & 3-Liter Syringe Quality Control Verification

3 Chapter 3: Body Plethysmography & Hardware

3.1 Body Plethysmograph Principles: Pressure, Volume, and Variable-Pressure-Constant-Volume Design 3.2 Plethysmograph Calibration, Pressure Transducers, and Shutter Mechanics 3.3 Quality Control, Isothermal Corrections, and Leak Detection in Plethysmography

4 Chapter 4: Gas Analyzers, Environmental Sensors, & Infection Control

4.1 Rapid and Multi-Gas Analyzers: Infrared, Zirconium, Mass Spec, Electrochemical, Thermal Conductivity 4.2 Environmental Sensors, Barometric Pressure, Temperature, and BTPS Correction Factors 4.3 Infection Control, Equipment Decontamination, Disposable Filters, and Spaulding Classification 4.4 Monitors: Pulse Oximeters, Blood Pressure Devices, and ECG Equipment 4.5 Gas Delivery Systems, Valves, Absorbers, and Aerosol / Inhaler Devices

5 Chapter 5: Spirometry Protocols & ATS/ERS Criteria

5.1 Forced Vital Capacity (FVC) and Slow Vital Capacity (SVC) Testing Protocols 5.2 ATS/ERS Spirometry Acceptability, Repeatability, and Usability Criteria 5.3 Peak Expiratory Flow Rate (PEFR), Maximum Voluntary Ventilation (MVV), and Flow-Volume Loops

6 Chapter 6: Lung Volume Determination Protocols

6.1 Open-Circuit Nitrogen Washout Method: Principles, Equipment, and Calculation 6.2 Closed-Circuit Helium Dilution Method: Principles, Equipment, and Calculation 6.3 Thoracic Gas Volume (TGV/FRCpleth) and Comparison of Lung Volume Methods

7 Chapter 7: Diffusing Capacity & Bronchial Challenge Testing

7.1 Single-Breath Carbon Monoxide Diffusing Capacity (DLCO) Testing Protocol 7.2 DLCO Calculations, Hemoglobin/COHb/Altitude Corrections, and VA 7.3 Bronchial Provocation Testing: Methacholine Challenge, Exercise-Induced Bronchospasm, and EIB Protocols 7.4 Inhaled Medication Delivery Technique and Patient Education

8 Chapter 8: Cardiopulmonary Exercise & ABG Testing

8.1 Cardiopulmonary Exercise Testing (CPET) Protocols, VO2max, and Anaerobic Threshold 8.2 Six-Minute Walk Test (6MWT) Protocol, Desaturation Monitoring, and O2 Titration 8.3 Arterial Blood Gas (ABG) Sampling, Allen Test, Analyzer Maintenance, and Quality Control 8.4 Pulse Oximetry and Oxygen Assessment: Principles, Limitations, and Titration Data 8.5 CO-Oximetry / Hemoximetry: Measurement, Dyshemoglobins, and Clinical Implications 8.6 Exercise Monitoring Data: Blood Pressure Response and ECG Rhythm Analysis

9 Chapter 9: Reference Values & PFT Calculations

9.1 Predicted Value Equations, Reference Populations, and GLI 2012 / ATS/ERS 2022 Standards 9.2 BTPS, STPD, and ATPS Conversion Formulas and Calculations 9.3 Gas Exchange Formulas, Alveolar Air Equation, and Mechanical Calculations

10 Chapter 10: Pattern Recognition & Clinical PFT Interpretation

10.1 Obstructive Ventilatory Defects: Asthma, COPD, Emphysema, Chronic Bronchitis, Bronchiectasis 10.2 Restrictive Ventilatory Defects: Parenchymal, Chest Wall, and Neuromuscular Disorders 10.3 Mixed Ventilatory Defects, Isolated Diffusion Defects, and Reversibility Protocols

11 Chapter 11: Artifact Recognition & Quality Assurance

11.1 Spirometry Artifacts: Hesitation, Coughing, Early Termination, Glottic Closure, Leak 11.2 Lung Volume and DLCO Artifacts: Panting Frequency, Shutter Leaks, Breath-Hold Failure 11.3 Quality Control Charts, Westgard Rules, and Laboratory Quality Assurance

12 Chapter 12: Documentation, Compliance, & Emergency Safety

12.1 PFT Reporting Standards, Tabular Formats, and Interpretation Graphics 12.2 CPT Billing Codes, ICD-10 Coding, HIPAA Privacy, and EHR Compliance 12.3 Emergency Preparedness, Contraindications, and Patient Safety Management in PFT Lab

13 Chapter 13: Specialized Procedures, Home Testing & Longitudinal Data

13.1 Respiratory Muscle Strength: MIP, MEP, SNIP, and Cough Peak Flow 13.2 Sputum Sample Collection: Spontaneous and Induced Specimens 13.3 Home Testing Instruction: Home Spirometry, Peak Flow Diaries, and Home Oximetry 13.4 Pediatric Pulmonary Function Testing and Upright Versus Supine Spirometry 13.5 Serial Pulmonary Function Testing, Clinical History, Demographics, and Laboratory Quality Management

9.2 BTPS, STPD, and ATPS Conversion Formulas and Calculations

Key Takeaways Explain This Topic AI

Spirometric volumes measured inside testing equipment under ambient room conditions (ATPS) must be converted to Body Temperature, Ambient Barometric Pressure, and Saturated with water vapor (BTPS) to reflect true intra-pulmonary volumes.

Gas diffusion (DLCO) and metabolic measurements (VO2, VCO2) are expressed at Standard Temperature (0°C / 273 K), Standard Pressure (760 mmHg), Dry (STPD) to standardize the exact molar quantity of gas molecules.

The BTPS conversion factor formula is derived from the Ideal Gas Law: V_BTPS = V_ATPS x [310 / (273 + T)] x [(P_bar - P_H2O) / (P_bar - 47)].

Water vapor pressure (P_H2O) increases exponentially with temperature, reaching a constant physiological partial pressure of 47 mmHg at body temperature (37°C).

Under standard ambient laboratory conditions, the BTPS conversion factor is always greater than 1.00 (typically 1.06 to 1.10) because exhaled gas expands when warmed from room temperature to 37°C and saturated with water vapor.

Last updated: August 2026

9.2 BTPS, STPD, and ATPS Conversion Formulas and Calculations

Gas volumes vary substantially depending on physical environmental conditions, specifically temperature, ambient barometric pressure, and water vapor content. In pulmonary function testing, gas volumes are measured inside instrumentation at room conditions but must be converted to standardized gas states to reflect accurate physiological processes.

This section reviews the physical definitions of ATPS , BTPS , STPD , and ATPD , derives the mathematical correction formulas from the Ideal Gas Law , presents step-by-step calculations, and highlights clinical technical errors required for the NBRC CPFT examination.

Standardized Gas Condition Definitions

Pulmonary function laboratories utilize four standardized gas conditions:

ATPS (Ambient Temperature, Pressure, Saturated): Gas volume measured under ambient room temperature ( T T T ), prevailing local barometric pressure ( P bar P_{\text{bar}} P bar ​ ), and saturated with water vapor at ambient temperature ( P H2O at T P_{\text{H2O at } T} P H2O at T ​ ). All raw volumes recorded by volume spirometers or flow sensors are initially ATPS.

BTPS (Body Temperature, Pressure, Saturated): Gas volume at body temperature ( 37 ∘ C = 310 K 37^\circ\text{C} = 310\text{ K} 3 7 ∘ C = 310 K ), ambient barometric pressure ( P bar P_{\text{bar}} P bar ​ ), and fully saturated with water vapor at 37 ∘ C 37^\circ\text{C} 3 7 ∘ C ( P H2O = 47 mmHg P_{\text{H2O}} = 47\text{ mmHg} P H2O ​ = 47 mmHg ).

Clinical Rule: All forced and slow spirometry maneuvers ( F V C FVC F V C , F E V 1 FEV_1 FE V 1 ​ , S V C SVC S V C ) and absolute lung volume determinations ( F R C FRC FRC , T L C TLC T L C , R V RV R V ) must be reported at BTPS to accurately reflect true anatomical lung volumes inside the chest.

STPD (Standard Temperature, Pressure, Dry): Gas volume at standard temperature ( 0 ∘ C = 273 K 0^\circ\text{C} = 273\text{ K} 0 ∘ C = 273 K ), standard barometric pressure ( 760 mmHg 760\text{ mmHg} 760 mmHg ), and completely dry ( P H2O = 0 mmHg P_{\text{H2O}} = 0\text{ mmHg} P H2O ​ = 0 mmHg ).

Clinical Rule: Diffusing capacity of the lung for carbon monoxide ( D L C O DLCO D L CO ), oxygen consumption ( V ˙ O 2 \dot{V}O_2 V ˙ O 2 ​ ), and carbon dioxide production ( V ˙ C O 2 \dot{V}CO_2 V ˙ C O 2 ​ ) must be reported at STPD so that measured gas transfer reflects the absolute number of gas molecules (moles) regardless of ambient conditions.

ATPD (Ambient Temperature, Pressure, Dry): Gas volume at ambient temperature and pressure, completely free of water vapor. Used primarily in specific calibration procedures.

Gas Condition Temperature Pressure Water Vapor ( P H2O P_{\text{H2O}} P H2O ​ ) Clinical Application

ATPS Ambient ( T ∘ C T^\circ\text{C} T ∘ C ) Barometric ( P bar P_{\text{bar}} P bar ​ ) Saturated at T ∘ C T^\circ\text{C} T ∘ C Raw instrumentation measurement

BTPS Body ( 37 ∘ C / 310 K 37^\circ\text{C} / 310\text{ K} 3 7 ∘ C /310 K ) Barometric ( P bar P_{\text{bar}} P bar ​ ) 47 mmHg 47\text{ mmHg} 47 mmHg ( 37 ∘ C 37^\circ\text{C} 3 7 ∘ C ) Spirometry, F V C FVC F V C , F E V 1 FEV_1 FE V 1 ​ , F R C FRC FRC , T L C TLC T L C , R V RV R V

STPD Standard ( 0 ∘ C / 273 K 0^\circ\text{C} / 273\text{ K} 0 ∘ C /273 K ) Standard ( 760 mmHg 760\text{ mmHg} 760 mmHg ) 0 mmHg 0\text{ mmHg} 0 mmHg (Dry) D L C O DLCO D L CO , V ˙ O 2 \dot{V}O_2 V ˙ O 2 ​ , V ˙ C O 2 \dot{V}CO_2 V ˙ C O 2 ​ , gas exchange

ATPD Ambient ( T ∘ C T^\circ\text{C} T ∘ C ) Barometric ( P bar P_{\text{bar}} P bar ​ ) 0 mmHg 0\text{ mmHg} 0 mmHg (Dry) Special instrument calibrations

Derivation of Conversion Formulas via the Ideal Gas Law

Conversions between gas conditions rely on the Combined Ideal Gas Law , which unifies Boyle's Law ( V ∝ 1 / P V \propto 1/P V ∝ 1/ P ), Charles' Law ( V ∝ T V \propto T V ∝ T ), and Gay-Lussac's Law: P 1 ⋅ V 1 T 1 = P 2 ⋅ V 2 T 2 \frac{P_1 \cdot V_1}{T_1} = \frac{P_2 \cdot V_2}{T_2} T 1 ​ P 1 ​ ⋅ V 1 ​ ​ = T 2 ​ P 2 ​ ⋅ V 2 ​ ​

Because water vapor exerts a partial pressure that reduces the partial pressure of dry gas molecules (Dalton's Law), the dry gas pressure is calculated as P dry = P bar − P H2O P_{\text{dry}} = P_{\text{bar}} - P_{\text{H2O}} P dry ​ = P bar ​ − P H2O ​ . Absolute temperature must always be expressed in Kelvin ( K = ∘ C + 273 K = {}^\circ\text{C} + 273 K = ∘ C + 273 ).

1. Derivation of the BTPS Formula

To convert a volume measured at ATPS ( V ATPS V_{\text{ATPS}} V ATPS ​ ) to BTPS ( V BTPS V_{\text{BTPS}} V BTPS ​ ): ( P bar − P H2O at T ) ⋅ V ATPS 273 + T = ( P bar − 47 ) ⋅ V BTPS 273 + 37 \frac{(P_{\text{bar}} - P_{\text{H2O at } T}) \cdot V_{\text{ATPS}}}{273 + T} = \frac{(P_{\text{bar}} - 47) \cdot V_{\text{BTPS}}}{273 + 37} 273 + T ( P bar ​ − P H2O at T ​ ) ⋅ V ATPS ​ ​ = 273 + 37 ( P bar ​ − 47 ) ⋅ V BTPS ​ ​

Solving explicitly for V BTPS V_{\text{BTPS}} V BTPS ​ : V BTPS = V ATPS ⋅ 310 273 + T ⋅ P bar − P H2O P bar − 47 V_{\text{BTPS}} = V_{\text{ATPS}} \cdot \frac{310}{273 + T} \cdot \frac{P_{\text{bar}} - P_{\text{H2O}}}{P_{\text{bar}} - 47} V BTPS ​ = V ATPS ​ ⋅ 273 + T 310 ​ ⋅ P bar ​ − 47 P bar ​ − P H2O ​ ​ BTPS Factor = ( 310 273 + T ) ⋅ ( P bar − P H2O P bar − 47 ) \text{BTPS Factor} = \left( \frac{310}{273 + T} \right) \cdot \left( \frac{P_{\text{bar}} - P_{\text{H2O}}}{P_{\text{bar}} - 47} \right) BTPS Factor = ( 273 + T 310 ​ ) ⋅ ( P bar ​ − 47 P bar ​ − P H2O ​ ​ )

Where:

T T T : Ambient room or spirometer temperature in ∘ C {}^\circ\text{C} ∘ C .

310 310 310 : Body temperature in Kelvin ( 273 + 37 273 + 37 273 + 37 ).

P bar P_{\text{bar}} P bar ​ : Current ambient barometric pressure in mmHg \text{mmHg} mmHg .

P H2O P_{\text{H2O}} P H2O ​ : Saturated water vapor pressure at temperature T ∘ C T^\circ\text{C} T ∘ C in mmHg \text{mmHg} mmHg .

47 47 47 : Saturated water vapor pressure at body temperature ( 37 ∘ C 37^\circ\text{C} 3 7 ∘ C ) in mmHg \text{mmHg} mmHg .

2. Derivation of the STPD Formula

To convert a volume measured at ATPS ( V ATPS V_{\text{ATPS}} V ATPS ​ ) to STPD ( V STPD V_{\text{STPD}} V STPD ​ ): ( P bar − P H2O at T ) ⋅ V ATPS 273 + T = 760 ⋅ V STPD 273 \frac{(P_{\text{bar}} - P_{\text{H2O at } T}) \cdot V_{\text{ATPS}}}{273 + T} = \frac{760 \cdot V_{\text{STPD}}}{273} 273 + T ( P bar ​ − P H2O at T ​ ) ⋅ V ATPS ​ ​ = 273 760 ⋅ V STPD ​ ​

Solving explicitly for V STPD V_{\text{STPD}} V STPD ​ : V STPD = V ATPS ⋅ 273 273 + T ⋅ P bar − P H2O 760 V_{\text{STPD}} = V_{\text{ATPS}} \cdot \frac{273}{273 + T} \cdot \frac{P_{\text{bar}} - P_{\text{H2O}}}{760} V STPD ​ = V ATPS ​ ⋅ 273 + T 273 ​ ⋅ 760 P bar ​ − P H2O ​ ​ STPD Factor = ( 273 273 + T ) ⋅ ( P bar − P H2O 760 ) \text{STPD Factor} = \left( \frac{273}{273 + T} \right) \cdot \left( \frac{P_{\text{bar}} - P_{\text{H2O}}}{760} \right) STPD Factor = ( 273 + T 273 ​ ) ⋅ ( 760 P bar ​ − P H2O ​ ​ )

Water Vapor Pressure Values ( P H2O P_{\text{H2O}} P H2O ​ )

Water vapor pressure increases non-linearly with temperature. Technologists must reference standardized vapor pressure tables when manually calculating conversion factors: Temperature ( ∘ C ) Water Vapor Pressure P H2O (mmHg) 20 ∘ C 17.5 mmHg 22 ∘ C 19.8 mmHg 24 ∘ C 22.4 mmHg 26 ∘ C 25.2 mmHg 37 ∘ C 47.0 mmHg \begin{array}{cc}

  • \hline
  • \text{Temperature } ({}^\circ\text{C}) & \text{Water Vapor Pressure } P_{\text{H2O}} \text{ (mmHg)} \\
  • \hline
  • 20^\circ\text{C} & 17.5 \text{ mmHg} \\
  • 22^\circ\text{C} & 19.8 \text{ mmHg} \\
  • 24^\circ\text{C} & 22.4 \text{ mmHg} \\
  • 26^\circ\text{C} & 25.2 \text{ mmHg} \\
  • 37^\circ\text{C} & 47.0 \text{ mmHg} \\
  • \hline

\end{array} Temperature ( ∘ C ) 2 0 ∘ C 2 2 ∘ C 2 4 ∘ C 2 6 ∘ C 3 7 ∘ C ​ Water Vapor Pressure P H2O ​ (mmHg) 17.5 mmHg 19.8 mmHg 22.4 mmHg 25.2 mmHg 47.0 mmHg ​ ​

  • Practical Step-by-Step Calculation Examples
  • Example 1: ATPS to BTPS at Altitude (Denver)

Clinical Scenario: A patient performs an F V C FVC F V C maneuver on a dry rolling-seal spirometer in a Denver laboratory. The raw measured F V C ATPS FVC_{\text{ATPS}} F V C ATPS ​ is 3.60 L 3.60 \text{ L} 3.60 L . The room thermometer reads 26 ∘ C 26^\circ\text{C} 2 6 ∘ C ( P H2O = 25.2 mmHg P_{\text{H2O}} = 25.2 \text{ mmHg} P H2O ​ = 25.2 mmHg ), and the station barometer reads 630 mmHg 630 \text{ mmHg} 630 mmHg .

Step 1: Temperature Correction Ratio Temp Ratio = 310 273 + 26 = 310 299 = 1.0368 \text{Temp Ratio} = \frac{310}{273 + 26} = \frac{310}{299} = 1.0368 Temp Ratio = 273 + 26 310 ​ = 299 310 ​ = 1.0368

Step 2: Pressure Correction Ratio Pressure Ratio = 630 − 25.2 630 − 47 = 604.8 583.0 = 1.0374 \text{Pressure Ratio} = \frac{630 - 25.2}{630 - 47} = \frac{604.8}{583.0} = 1.0374 Pressure Ratio = 630 − 47 630 − 25.2 ​ = 583.0 604.8 ​ = 1.0374

Step 3: BTPS Factor BTPS Factor = 1.0368 × 1.0374 = 1.0756 \text{BTPS Factor} = 1.0368 \times 1.0374 = 1.0756 BTPS Factor = 1.0368 × 1.0374 = 1.0756

Step 4: Corrected Volume F V C BTPS = 3.60 L × 1.0756 = 3.872 L ≈ 3.87 L FVC_{\text{BTPS}} = 3.60 \text{ L} \times 1.0756 = 3.872 \text{ L} \approx 3.87 \text{ L} F V C BTPS ​ = 3.60 L × 1.0756 = 3.872 L ≈ 3.87 L

Notice that the pressure ratio is larger at altitude than at sea level for the same room temperature, because the constant 47 mmHg 47 \text{ mmHg} 47 mmHg subtraction removes a proportionally bigger slice of a smaller barometric pressure. Entering a sea-level default of 760 mmHg for a Denver laboratory therefore under-corrects every reported volume.

Example 2: ATPS to STPD Diffusing Capacity Calculation

Clinical Scenario: During a single-breath D L C O DLCO D L CO test, the collected alveolar sample volume at ATPS is 3.00 L 3.00 \text{ L} 3.00 L at 24 ∘ C 24^\circ\text{C} 2 4 ∘ C ( P H2O = 22.4 mmHg P_{\text{H2O}} = 22.4 \text{ mmHg} P H2O ​ = 22.4 mmHg ) and 760 mmHg 760 \text{ mmHg} 760 mmHg barometric pressure.

Step 1: Calculate STPD Factor STPD Factor = ( 273 273 + 24 ) × ( 760 − 22.4 760 ) = ( 273 297 ) × ( 737.6 760 ) = 0.9192 × 0.9705 = 0.8921 \text{STPD Factor} = \left( \frac{273}{273 + 24} \right) \times \left( \frac{760 - 22.4}{760} \right) = \left( \frac{273}{297} \right) \times \left( \frac{737.6}{760} \right) = 0.9192 \times 0.9705 = 0.8921 STPD Factor = ( 273 + 24 273 ​ ) × ( 760 760 − 22.4 ​ ) = ( 297 273 ​ ) × ( 760 737.6 ​ ) = 0.9192 × 0.9705 = 0.8921

Step 2: Calculate V STPD V_{\text{STPD}} V STPD ​ V STPD = 3.00 L × 0.8921 = 2.676 L ≈ 2.68 L V_{\text{STPD}} = 3.00 \text{ L} \times 0.8921 = 2.676 \text{ L} \approx 2.68 \text{ L} V STPD ​ = 3.00 L × 0.8921 = 2.676 L ≈ 2.68 L

Clinical Pitfalls and Technical Sources of Error

Incorrect Sensor Temperature Reading: Heated pneumotachometers maintain internal sensor temperatures at 37 ∘ C 37^\circ\text{C} 3 7 ∘ C to prevent water condensation. If the software incorrectly applies an ambient BTPS correction factor ( 1.09 1.09 1.09 ) to a heated sensor at body temperature, measured volumes will be artificially overestimated by 8-10% .

Failure to Update Barometric Pressure: Changes in weather fronts or testing at high altitudes alter P bar P_{\text{bar}} P bar ​ . At high altitude (e.g., Denver, P bar ≈ 630 mmHg P_{\text{bar}} \approx 630 \text{ mmHg} P bar ​ ≈ 630 mmHg ), the BTPS conversion factor increases. Failing to input local P bar P_{\text{bar}} P bar ​ causes significant calculation errors.

Cooling Effects in Volume Spirometers: As warm exhaled gas enters an unheated water-seal or dry-rolling seal spirometer, the gas rapidly cools toward ambient room temperature. Computerized software must apply dynamic cooling algorithms to prevent underestimating vital capacity.