Study guide
16.2 The Site History File
Certified Playground Safety Inspector CPSI
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Pathways, Scheduling & Fees 1.3 Recertification, Registry & What a CPSI Does
2 Standards Landscape & Injury Epidemiology
2.1 Playground Standards & Guidelines (ASTM and CPSC) 2.2 Why the Standards Exist 2.3 Causes of Injury & Injury Patterns
3 Hazard Ranking & Entanglement
3.1 Identifying, Ranking & Prioritizing Hazards 3.2 Causes of Entanglement Hazards 3.3 Tools to Identify Entanglement Hazards
4 Protrusions & Entrapment Causes
4.1 Causes of Protrusion Hazards 4.2 Tools and Gauges to Identify Protrusions 4.3 Causes of Entrapment Hazards
5 Entrapment Tools & Crush/Shear
5.1 Tools and Probes to Identify Entrapment 5.2 Causes of Crush and Shear Hazards 5.3 Tools and Dowels to Identify Crush/Shear
6 Miscellaneous Hazards, Platforms & Access
6.1 Miscellaneous Hazards 6.2 Platforms, Guardrails & Barriers 6.3 Access, Egress & Handrails
7 Slides, Swings & Climbers
7.1 Slides 7.2 Swings 7.3 Climbers & Upper-Body Equipment
8 Rotating, Rocking & Track Equipment
8.1 Rotating Equipment 8.2 Rocking Equipment, Seesaws & Spring Rockers 8.3 Track Rides, Trolleys & Other Equipment
9 Surfacing Standards & Testing
9.1 Surfacing Standards & Guidelines 9.2 Impact Attenuation, Gmax & HIC 9.3 Verifying Surfacing Compliance
10 Critical Height, Fall Height & Materials
10.1 Critical Height 10.2 Fall Height 10.3 Surfacing Material Selection
11 Surfacing Maintenance & Child Development
11.1 Surfacing Maintenance Requirements 11.2 Child Growth & Development 11.3 Age-Appropriateness of Equipment
12 Site, Materials & Layout
12.1 Site Selection, Shade & Drainage 12.2 Equipment Materials & Manufacturing 12.3 Design, Layout & Signage
13 Accessibility, Use Zones & Recalls
13.1 Accessibility Requirements 13.2 Use Zones 13.3 Industry Trends, Recalls & Alerts
14 Audit & Inspection Systems
14.1 Development and Use of Audit Forms 14.2 Development and Use of Inspection Forms 14.3 Factors Affecting Inspection Frequency
15 Nonlisted Equipment, Corrective Action & Removal
15.1 Evaluating Equipment Not Listed in the Standards 15.2 Corrective Action & Maintenance Methods 15.3 Taking Equipment Out of Service
16 Records, Site History & Compliance Documents
16.1 Record-Keeping Requirements 16.2 The Site History File 16.3 Manufacturer & Installer Compliance Documents
17 Investigations, Standard of Care & Ethics
17.1 Injury Reporting & Accident Investigation 17.2 Standard of Care Policies & Implementation 17.3 CPSI Code of Professional Conduct
16.2 The Site History File
Key Takeaways Explain This Topic AI
A site history file is a living file for one playground, not a citywide address list or the inspector's disposable notes.
The file holds original design and age-group intent, manufacturer cut sheets, install date and installer, surfacing identity, F1292 critical-height reports, F1951 reports if any, product-level IPEMA certificates, and as-built drawings.
Prior audits, the injury log, modifications, recall checks, and dated photos over time belong in the same folder so decay can be compared to the original site.
Without that file a CPSI cannot verify that today's surfacing thickness still matches the laboratory report, or that a hanger is the original specified part.
A CPSI arriving as a contractor should request the site history file before the visit.
Last updated: August 2026
16.2 The Site History File
Domain 5B is not a citywide binder of park addresses. It is a living file for one playground — one bay, one composite, one address that a later inspector can reconstruct without calling the original installer. Domain 5A told you to keep signed inspections and repairs. Domain 5B tells you where those papers live and what else must sit beside them so the site has a memory.
A playground without a site history file is a pile of steel and surfacing with no biography. You can still run probes. You cannot tell whether today's three inches of engineered wood fiber is the system in the laboratory report, whether the swing hanger is the part the manufacturer specified, or whether last year's audit already ranked the same opening as a priority failure.
What belongs in the file for this playground
Build the file so each of the following has a labeled home. Mixed-vendor sites need a divider per event, not one unmarked envelope.
Document What it proves What you cannot do without it
Original design / age-group intent Posted 6–23 months, 2–5, 5–12, or mixed; the layout the owner bought You cannot pick the correct ASTM paper or probe table
Manufacturer cut sheets Model, materials, fall height, hardware kit, inspection interval You cannot match a part or a recall to the event
Install date and installer Who set the footings and when the clock started You cannot age plastics, fasteners, or surfacing
Surfacing system identity Product, specified thickness, containment, wear mats You cannot compare the pad to any lab report
ASTM F1292 critical-height reports Laboratory impact rating at a stated thickness and system You cannot test whether today's depth still matches the rating
ASTM F1951 reports, if any Laboratory accessibility of that surface system You cannot speak to wheelchair maneuverability claims
IPEMA certificates Product-level third-party certification to designated ASTM criteria You cannot confuse a bag sticker with a site inspection
As-built drawings What was actually installed, including field changes You cannot tell a later modification from the original
Prior audits Previous CPSI baselines, citations, and owner acknowledgments You cannot see what was already found and ranked
Injury log Accidents and injuries reported on this playground You cannot connect a pattern to a component
Modifications Added events, moved borders, replacement hangers, new surfacing lifts You cannot know whether today's hardware is original
- Recall checks Dated searches against CPSC and manufacturer alerts You cannot prove the owner looked
- Photos over time Opening day, each audit, each major repair You cannot show decay or prove a condition existed
That table is the Domain 5B file. A single invoice or a brochure photograph is not a site history file.
Why the file is living
"Living" means the folder is updated when the site changes. A new slide bed, a replaced hanger, a two-inch surfacing lift, a border that was reset, a composite that was reoriented, or a toddler bay that was added all get a dated note and a photo. The original cut sheet stays. The modification sits on top of it. Throwing the opening-day drawings because "we remodeled" erases the only proof of what the footings were designed to hold.
IPEMA certificates are product-level . The International Play Equipment Manufacturers Association program certifies that a manufactured product was tested to designated ASTM criteria — commonly ASTM F1487 for equipment, F1292 for impact attenuation, F2075 for engineered wood fiber, F3012 for loose-fill rubber, or F1951 for accessibility — as of a date, for a stated model and thickness. An IPEMA mark on a post or a bag does not certify the installed playground after five years of kick-out, UV, and missing hardware. Domain 5B files the certificate. It does not let the certificate replace the current audit.
F1292 reports are laboratory critical-height ratings for a specified system at a specified thickness . F1951 reports, when they exist, are laboratory accessibility results for that surface system. Both belong next to the surfacing identity sheet so a later CPSI can ask the Domain 5B question: is the surface still the system in the report?
What you cannot verify without the file
Two exam-ready failures follow from a missing file.
Today's surfacing thickness versus the lab report. You measure 7 inches of engineered wood fiber under a 10-foot fall. The F1292 report — if you had it — might have rated that product at 12 inches for a 10-foot critical height. Without the report and the specified thickness, you are guessing. CPSC Table 2 is a fallback depth table for non-impact-tested loose-fill. It does not reconstruct a missing manufacturer report for a specified system, and it does not tell you whether this fiber is the fiber that was tested.
Whether a hanger is the original part. Swing hangers, track-ride carriages, and clamps have model-specific wear limits and replacement kits. A hardware-store eyebolt that "fits the hole" can introduce a protrusion, an entanglement, or a load rating the manufacturer never approved. Without the cut sheet, the as-built, and the modification log, you cannot tell a specified hanger from a substitute.
The same logic applies to a barrier that looks factory-made, a plastic slide bed of a slightly different color, and a pour-in-place patch that is not the original formulation. The file is how you stop treating every metal part as original equipment.
The contract CPSI asks before arriving
A CPSI who is an employee may already have the cabinet key. A CPSI arriving as a contractor should request the site history file before the visit . Put the request in writing. Ask for design intent, cut sheets, install records, surfacing reports, IPEMA certificates, as-builts, prior audits, the injury log, modification notes, recall-check dates, and photo history. If the owner has nothing, that absence is itself a Domain 5B finding. You still inspect the equipment. You write that you could not compare the as-built site to its own paper.
Do not treat a missing file as permission to invent certificates. Do not skip the visit because the cabinet is empty. Do not rely on a social-media photo of opening day as the as-built. Walk the site with whatever paper you were given, list every document that should have been there, and tell the owner — in writing — what the gap prevents you from verifying.
Assemble or request the Domain 5B file in this order:
Confirm this folder is for one playground , named by park, address, and bay.
Pull design and age-group intent , cut sheets , install date , and installer .
File the surfacing system , the F1292 critical-height report , and any F1951 report.
File product-level IPEMA certificates and as-built drawings .
Add prior audits , the injury log , modifications , recall checks , and photos over time .
If you are the outside CPSI, request that packet before the visit and document whatever never arrives.
Domain 5B compressed into one sentence: one living folder per playground is how you prove today's surface and hardware still match the paper that justified opening the gate.