Study guide
12.3 Design, Layout & Signage
Certified Playground Safety Inspector CPSI
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Pathways, Scheduling & Fees 1.3 Recertification, Registry & What a CPSI Does
2 Standards Landscape & Injury Epidemiology
2.1 Playground Standards & Guidelines (ASTM and CPSC) 2.2 Why the Standards Exist 2.3 Causes of Injury & Injury Patterns
3 Hazard Ranking & Entanglement
3.1 Identifying, Ranking & Prioritizing Hazards 3.2 Causes of Entanglement Hazards 3.3 Tools to Identify Entanglement Hazards
4 Protrusions & Entrapment Causes
4.1 Causes of Protrusion Hazards 4.2 Tools and Gauges to Identify Protrusions 4.3 Causes of Entrapment Hazards
5 Entrapment Tools & Crush/Shear
5.1 Tools and Probes to Identify Entrapment 5.2 Causes of Crush and Shear Hazards 5.3 Tools and Dowels to Identify Crush/Shear
6 Miscellaneous Hazards, Platforms & Access
6.1 Miscellaneous Hazards 6.2 Platforms, Guardrails & Barriers 6.3 Access, Egress & Handrails
7 Slides, Swings & Climbers
7.1 Slides 7.2 Swings 7.3 Climbers & Upper-Body Equipment
8 Rotating, Rocking & Track Equipment
8.1 Rotating Equipment 8.2 Rocking Equipment, Seesaws & Spring Rockers 8.3 Track Rides, Trolleys & Other Equipment
9 Surfacing Standards & Testing
9.1 Surfacing Standards & Guidelines 9.2 Impact Attenuation, Gmax & HIC 9.3 Verifying Surfacing Compliance
10 Critical Height, Fall Height & Materials
10.1 Critical Height 10.2 Fall Height 10.3 Surfacing Material Selection
11 Surfacing Maintenance & Child Development
11.1 Surfacing Maintenance Requirements 11.2 Child Growth & Development 11.3 Age-Appropriateness of Equipment
12 Site, Materials & Layout
12.1 Site Selection, Shade & Drainage 12.2 Equipment Materials & Manufacturing 12.3 Design, Layout & Signage
13 Accessibility, Use Zones & Recalls
13.1 Accessibility Requirements 13.2 Use Zones 13.3 Industry Trends, Recalls & Alerts
14 Audit & Inspection Systems
14.1 Development and Use of Audit Forms 14.2 Development and Use of Inspection Forms 14.3 Factors Affecting Inspection Frequency
15 Nonlisted Equipment, Corrective Action & Removal
15.1 Evaluating Equipment Not Listed in the Standards 15.2 Corrective Action & Maintenance Methods 15.3 Taking Equipment Out of Service
16 Records, Site History & Compliance Documents
16.1 Record-Keeping Requirements 16.2 The Site History File 16.3 Manufacturer & Installer Compliance Documents
17 Investigations, Standard of Care & Ethics
17.1 Injury Reporting & Accident Investigation 17.2 Standard of Care Policies & Implementation 17.3 CPSI Code of Professional Conduct
12.3 Design, Layout & Signage
Key Takeaways Explain This Topic AI
CPSC 2025 §2.2 organizes layout around accessibility, age separation, conflicting activities, sight lines, signage or labeling, and supervision.
Playgrounds that serve more than one age band need distinct areas separated at least by a buffer zone such as shrubs or benches so older, faster children do not run through younger groups.
Separate active from quiet play, put moving equipment toward a corner or edge, keep slide exits uncongested, never place an access component in a slide exit zone, and disperse heavy-use events to avoid crowding.
Signs and labels must be readily visible and must warn in time for the viewer to act; they should guide age-appropriateness, and ASTM F1487 carries the technical sign and label criteria.
Supervision quality depends on the supervisor's knowledge; check broken equipment, strangulation items, user modifications, surfacing, heat, and horseplay. Supervision is not a substitute for compliant design, layout, and maintenance.
Last updated: August 2026
12.3 Design, Layout & Signage
Domain 3E is the plan-view chapter. Domain 3C asked whether the ground was a legal place to put a playground. Domain 3D asked what the equipment is made of. CPSC Handbook 325 (July 2025) §2.2 now asks whether the pieces are arranged so children can reach them, so age bands do not collide, so a slide exit is not a mixing bowl, and so a supervisor can see what is happening in time to act. The six layout factors are not decorations for a site plan. They are the reasons two compliant structures can still produce a preventable collision.
Layout factor (CPSC §2.2) What it is trying to stop Field cue a CPSI writes down
Accessibility (§2.2.1) Children with disabilities locked out of the play opportunity Accessible routes and surfaces that meet ASTM F1951 and the 2010 ADA Standards
Age separation (§2.2.2) Older, faster children running through slower toddlers and preschoolers Distinct areas plus at least a buffer zone (shrubs or benches)
Conflicting activities (§2.2.4) Collisions between moving equipment, slide traffic, and quiet play Active vs. quiet; moving equipment at a corner or edge; uncongested slide exits
Sight lines (§2.2.5) A caregiver who cannot see the child Visual barriers minimized; older area visible from the younger area
Signage and/or labeling (§2.2.6) The wrong-age user on equipment scaled for someone else Signs visible in time to act; age guidance; ASTM F1487 for label criteria
Supervision (§2.2.7) Unseen horseplay, heat, ropes, and broken parts Knowledgeable supervisor; not a substitute for compliant design
Accessibility is a civil-rights layout duty
Section 2.2.1 tells the designer that accessible surfaces and routes in the play area should meet ASTM F1951 , which aligns with the ADA Standards . Equipment selection, equipment location, and the type of protective surfacing are the three levers that decide whether a child who uses a wheelchair can actually play. An F1951 laboratory report that says a surface is wheelchair-maneuverable does not place the transfer platform, the ramp, or the accessible route. Domain 2 already taught that F1951 is not F1292. Domain 3E adds that accessibility is also not a plaque at the gate. If the only path to the school-age climber is loose-fill that will not roll, or if the ramp dumps a user into a swing use zone, the layout failed 2.2.1 even if every deck height is F1487-correct.
Age separation with a real buffer
For playgrounds intended to serve children of all ages , §2.2.2 wants the layout of pathways and the landscaping to show distinct areas for the different age groups. Those areas should be separated at least by a buffer zone , which could be shrubs or benches. The purpose is not aesthetics. The buffer reduces the chance of injury from older, more active children running through areas filled with younger children who have slower movement and reaction times. A six-inch painted stripe on the poured-in-place is not a buffer. A bench line or a planted strip that actually interrupts a run path is.
Section 2.2.3 then warns that where access is unlimited or enforced only by signage, caregivers will put a child slightly above or below the intended band — especially at the age-2 and age-5 cutoffs . The handbook keeps an overlap at age 5 for that reason. Inspectors use the intended age group of the playground. Child-care centers that serve only toddlers may limit a yard to children under 2 and draw on ASTM F2373 . A school with no one under 4 plans differently. Do not inspect a 2–5 composite as if it were a 5–12 structure because one tall five-year-old was on it at 3 p.m.
Conflicting activities, corners, and slide exits
Section 2.2.4 wants the play area organized so children are not injured by conflicting activities and by running between activities . The operational list is:
Separate active, physical play from passive or quiet play. Equipment, open fields, and sandboxes belong in different sections.
Disperse popular, heavy-use pieces so one corner does not become a crowd. Two high-demand events stacked on the same deck — a long slide next to a track ride next to the only climber — manufacture congestion CPSC already told you to avoid.
Locate moving equipment such as swings and merry-go-rounds toward a corner, side, or edge of the play area while still holding the use zone. Putting a swing bay in the geographic center forces every circulating child through the motion envelope.
Locate slide exits in an uncongested area . The exit use zone is where a child is standing up, looking at feet, and about to take a step. It is not a hallway.
On composite structures , adjacent components should be complementary. An access component should not be located in a slide exit zone. A stair or climber that dumps traffic into the chute exit is the handbook's own example of a layout fail.
Use zones themselves are measured in §5.3. Domain 3E only requires you to know that those zones, plus this placement logic, are how you keep two legal structures from becoming one collision.
Sight lines a caregiver can use
Section 2.2.5 is honest: a playground that meets the guidelines can still present hazards. Layout should let parents or caregivers keep track of children as they move . Minimize visual barriers. In a park, equipment should be as visible as possible from benches. Where there are separate age areas, the older children's area should be visible from the younger children's area so a caregiver of mixed-age siblings can see the eight-year-old while staying with the two-year-old. A berm, a solid restroom wall, or a shade structure that blanks the sight line is a layout finding, not "nice privacy."
Signage that is visible in time to act
Section 2.2.6 does not pretend a sign replaces design. It does require signs or labels that give supervisors guidance on the age appropriateness of the equipment. Those signs and labels should be placed so they:
Are readily visible to the intended viewer, and
Alert the viewer to the potential hazard in time to take appropriate action.
A faded age decal on the back side of a post, or a strangulation warning mounted where a running child cannot see it before entering a bay, fails both tests. CPSC then sends you to ASTM F1487 for more information on signs and labels. F1487 is the technical specification for durability, content, and placement of manufacturer labels. Handbook 325 is the owner-facing narrative. On the exam, "visible, in time to act, age-appropriate, see F1487" is the complete 2.2.6 answer.
Supervision is knowledge plus design — never design's substitute
Section 2.2.7 opens with the sentence Domain 3E exists to test: the quality of the supervision depends on the quality of the supervisor's knowledge of safe play behavior. Designers should know who will actually be watching — paid professionals, seasonal workers, PTA volunteers, or parents — because that changes how much the layout must do without a trained eye. Toddlers and preschoolers need more attentive supervision than older children. One should not rely on supervision alone to prevent injuries.
Supervisors should understand, and a CPSI should be able to teach, this checklist:
Check for broken equipment and keep children off it.
Know strangulation hazards: no helmets or clothing with drawstrings, straps, or cords ; no pet leashes, jump ropes, cables, string, or other corded items on or near the equipment.
Find and remove unsafe modifications , especially ropes tied to equipment , before play starts.
Confirm protective surfacing is in place and maintained.
Check whether equipment and surfacing feel hot before children use them, and make sure children wear footwear to prevent burns, cuts, or punctures.
Stop dangerous horseplay (throwing surfacing, jumping from heights) and stop children from wandering toward the hazards Domain 3C already named.
Do not slide with a child in tandem or on an adult's lap — that pattern causes foot and leg fractures.
A staffing note that says "add a monitor" is not a corrective action for a stair in a slide exit, a missing age label, a swing bay in the circulation core, or a 2–5 structure with no buffer from the 5–12 upper-body equipment. Supervision changes shifts. The layout stays.
Domain 3E, compressed: accessible routes and F1951 surfaces; age bands with a real buffer; active play away from quiet play; moving equipment at the edge; uncongested slide exits with no access component in the exit zone; sight lines a mixed-age caregiver can use; signs that are visible in time to act and that point to F1487; supervisors who know the heat, rope, surfacing, and horseplay list — and a written understanding that none of that knowledge excuses a noncompliant design.